Effect of wood sawdust filler on the mechanical properties of Indian mallow fiber yarn mat reinforced with polyester composites

The research article focused on the effect of wood sawdust as secondary filler reinforcement in Indian mallow fiber yarn mat reinforced with polyester composites. Composites were fabricated along the transverse and longitudinal orientation in six different combinations by compression molding machine. The mechanical properties of composites by single and double layer yarn mat with and without wood sawdust filler were evaluated while loading composites specimen on warp and weft direction at the first time in this research paper. The Indian mallow fiber double layer longitudinal orientation yarn mat/wood sawdust filler/polyester composite specimen along the warp direction was found to exhibit optimum mechanical properties compared to other composites. Furthermore, the Indian mallow fiber yarn mat composites were fabricated with helmet and civil construction pipes at first time in this work to replace the synthetic fiber through natural fiber. Scanning electron microscopy was performed to study the morphologies of internal crack and fractured surface of composites.     

Review: Raw Natural Fiber–Based Polymer Composites

The effective utilization of raw natural fibers as indispensable component in polymers for developing novel low-cost eco-friendly composites with properties such as acceptable specific strength, low density, high toughness, good thermal properties, and biodegradability is one of the most rapidly emerging fields of research in polymer engineering and science. In fact, raw natural fiber–reinforced composites are the subject of numerous scientific and research projects, as well as many commercial programs. Keeping in mind the immense advantages of raw natural fibers, in the present article we concisely review raw natural fiber/polymer matrix composites with particular focus on their mechanical properties.     

稀土元素镧对锌阳极带电化学性能的影响

研究了镧的加入对牺牲锌阳极带电化学性能的影响。结果表明，稀土元素镧对锌阳极带的电位和电流效率影响很小，实验结果符合相关标准。证明在纯锌中添加微量稀土元素镧改善锌阳极带机械性能，同时保持必要的电化学性能的工艺方法是有效、可行的。     

Completely biodegradable composites of poly(propylene carbonate) and short,lignocellulose fiber Hildegardia populifolia

The composites of biodegradable poly(propylene carbonate) (PPC) reinforced with short Hildegardia populifolia natural fiber were prepared by melt mixing followed by compression molding. The mechanical properties, thermal properties, and morphologies of the composites were studied via static and dynamic mechanical measurements, thermogravimetric analysis, and scanning electron microscopy (SEM) techniques, respectively. Static tensile tests showed that the stiffness and tensile strength of the composites increased with an increasing fiber content. However, the elongation at break and the energy to break decreased dramatically with the addition of short fiber. The relationship between the experimental results and the compatibility or interaction between the PPC matrix and fiber was correlated. SEM observations indicated good interfacial contact between the short fiber and PPC matrix. Thermogravimetric analysis revealed that the introduction of short Hildegardia populifolia fiber led to a slightly improved thermooxidative stability of PPC. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 666–675, 2004     

Lignocellulosic composite

Banana pseudostem fiber which is a lignocellulosic material, relatively inexpensive, and abundantly available was assessed in terms of its fiber‐matrix adhesion and dispersion in composites. Different types of adhesives were used. The mechanical and water absorption properties were investigated. Overall, for the produced composites, the incorporation of sawdust‐urea‐formaldehyde resin into prehydrolyzed banana fiber resulted in the best mechanical properties. Good adhesion‐fiber interaction is believed to be responsible for the good ultimate performance. The superior reinforcing characteristics of sawdust resin were shown by scanning electron microscopy (SEM), which revealed better fiber‐matrix adhesion. Water absorption tests revealed that the presence of the adhesives affected the amount of water absorbed. Copyright © 2004 John Wiley & Sons, Ltd.     

Mechanical properties of rigid polyurethane composites reinforced with surface treated ultrahigh molecular weight polyethylene fibers

The mechanical properties of ultrahigh molecular weight polyethylene (UHMWPE) fibers reinforced rigid polyurethane (PU) composites were studied, and the effects of the fiber surface treatment and the mass fraction were discussed. Chromic acid was used to treat the UHMWPE fibers, and polyurethane composites were prepared with 0.1 to 0.6 wt% as‐received and treated UHMWPE fibers. Attenuated total reflection Fourier transform infrared demonstrated that oxygen‐containing functional groups were efficiently grafted to the fiber surface. The mechanical performance tests of the UHMWPE fibers/PU composites were conducted, and the results revealed that the treated UHMWPE fibers/PU composites had better tensile, compression, and bending properties than as‐received UHMWPE fibers/PU composites. Thermal gravimetric analyzer showed that the thermal stability of the treated fiber composites were improved. The interface bonding of PU composites were investigated by scanning electron microscopy and dynamic mechanical analysis, and the results indicated that the surface modification of UHMWPE fiber could improve the interaction between fiber and PU, which played a positive role in mechanical properties of composites.     

Mechanical and thermal properties of Acacia leucophloea fiber/epoxy composites: Influence of fiber loading and alkali treatment

In this work, the influence of fiber content and alkali treatment on the mechanical and thermal properties of Acacia leucophloea fiber-reinforced epoxy composites was studied. Ten composite samples were fabricated by varying fiber content (5, 10, 15, 20, and 25 wt%); both untreated and treated fiber were soaked in a 5% NaOH solution for 45 min by using hand-layup method. The composite reinforced with 20 wt% treated fiber content exhibited better mechanical properties and thermal properties. Fourier transform infrared analysis, morphological analysis by atomic force microscope, and scanning electron microscope of composites were also performed.     

Preparation of starch-based biocomposites reinforced with mercerized lignocellulosic fibers: Evaluation of their thermal,morphological, mechanical,and biodegradable properties

In the present paper, starch-based biocomposites have been prepared by reinforcing corn starch matrix with mercerized Abelmoschus esculentus lignocellulosic fibers. The effect of fiber content on mechanical properties of composite was investigated and found that tensile strength, compressive strength, and flexural strength at optimum fiber content were 69.1%, 93.7% and 105.1% increased to that of cross-linked corn starch matrix, respectively. The corn starch matrix and its composites were characterized by Fourier transform infrared spectroscopy (FT-IR), Scanning electron microscopy (SEM), X-ray diffraction (XRD) and thermogravimetric (TGA) analysis. The fiber reinforced composites were found to be highly thermal stable as compared to natural corn starch and cross-linked corn starch matrix. Further, water uptake and biodegradation studies of matrix and composites have also been studied.     

Mechanical properties and morphological structures of short glass fiber reinforced PP/EPDM composite

The mechanical properties and crystal morphological structures of short glass fiber (SGF) reinforced dynamically photo-irradiated polypropylene (PP)/ethylene-propylene-diene terpolymer (EPDM) composites were studied by mechanical tests, wide-angle X-ray diffraction (WAXD), optical microscopy, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and thermogravimetric analyzer (TGA). The mechanical properties of PP/EPDM composites, especially the tensile strength were greatly strengthened by dynamically photo-irradiation and the incorporation of SGF. The results from the WAXD, SEM, DSC, and TGA measurements reveal: (i) the formation of β-type crystal of PP in the PP/EPDM/SGF composite; (ii) the fiber length in dynamically photo-irradiated PP/EPDM/SGF composites are general longer than that in corresponding unirradiated samples. The size of EPDM phase in the photo-irradiated composites reduces obviously whereas the droplet number increases; (iii) photo-irradiation improves the interface adhesion between SGF and polymer matrix; (iv) the melting and crystallization temperatures of the photo-irradiated composites are not affected greatly by increasing the SGF content; (v) the thermal analysis results show that the incorporation of SGF into PP/EPDM plays an important role for increasing its thermal stability.     

Selection of natural fibers based brake friction composites using hybrid ELECTRE-entropy optimization technique

Selecting the best brake friction composite composition amongst a set of natural fibres reinforced composites using hybrid optimization method - ELECTRE (elimination and choice translating priority) II - entropy is discussed in this article. Three sets of natural fibres containing different amounts of banana, hemp, and pineapple reinforced brake friction composites were tested according to IS 2742 (part-4) regulations on a chase friction testing machine. The experimental results have been discussed in terms of seven performance defining attributes such as coefficient of friction, fade, wear, friction stability coefficient, friction recovery, friction fluctuations, and friction variability coefficient. The composite containing 5 wt% pineapple fiber exhibit the highest coefficient of friction, whereas wear performance and friction stability remain highest for 5 wt% hemp fiber based composites. The recovery performance remains highest for the composite containing 15 wt% banana fiber, while fade, friction variability, and fluctuations remain lowest for 10 wt% banana fiber reinforced composites. The tribological results indicate that the inclusion of disparate natural fibers in varying amounts may differently affect the tribological performances and therefore to choose the best brake friction composite satisfying the maximum beneficial criteria hybrid ELECTRE II- entropy optimization technique is used. Brake friction composite containing ~10 wt% banana fibers was ranked first, in meeting the desired performance tribological properties. A comparison of this optimization approach with other multi-criteria decision-making techniques is also made for validating the performance ranking of these composites.     

Property correlations for composites based on ethylene propylene diene rubber reinforced with flax fibers

EPDM composites filled with short flax fibers were prepared by melt blending procedure. The effects of fiber loading on the mechanical, thermal and water uptake characteristics were studied. The physico-mechanical, morphological thermal properties and water absorption behavior were discussed using tensile testing, differential scanning calorimetry, thermogravimetrical analysis and scanning electron microscopy. Scanning electron microscopy revealed that the flax fibers were well dispersed in the polymer matrix. The tensile strength and hardness of the composites were found to be improved at higher fiber loading. The water absorption pattern of EPDM/fiber composites at room temperature follows a Fickian behavior for composites with 10, 15 and 20 phr flax fiber.     

Mechanical and thermal characterization of sisal fiber reinforced polylactic acid composites

The advantages of green composites are including, but not limited to their environmental friendly nature, lightweight, reduction of production energy and costs, and recyclability. This work focuses on the mechanical, thermal, and dynamic mechanical properties of biocomposites. For that purpose, biosourced polymers were used, namely polylactic acid (PLA) and sisal fiber, and biocomposites were extruded and then injection molded with different contents of sisal fibers (5%, 10%, 15%). The results show that the increase of the rate of reinforcement improves the mechanical and dynamic mechanical properties of the biocomposites made. By the increase of the sisal fiber content, the degree of crystallinity of the matrix was increased from 47% to 61%, as sisal fibers were acted as a nucleating agent for the PLA.     

氯化聚丙撑碳酸酯增容聚丙撑碳酸酯/秸秆粉复合材料的制备及性能

聚丙撑碳酸酯(PPC)是一种新型热塑性生物降解材料,但其热性能及力学性能较差,应用受到限制。以秸秆粉这种农作物副产品作为增强体改性PPC,既可以提高PPC的力学性能同时又可开发利用秸秆资源。氯化聚丙撑碳酸酯(CPPC)是聚丙撑碳酸酯(PPC)经过氯化得到的,对天然纤维表面具有良好的浸润性和粘结性。本文以CPPC为增容剂,通过熔融共混法制备了PPC/秸秆粉复合材料。采用扫描电子显微镜(SEM)、拉伸实验、动态力学性能测试(DMA)及转矩流变仪对复合材料的结构及性能进行了表征,重点考察了CPPC的添加量对复合材料力学和流变性能的影响。结果表明,当CPPC质量分数为1.8%时,可使添加质量分数为30%秸秆粉的PPC复合材料拉伸强度提高38%,模量提高30%。同时,CPPC的引入使复合材料的粘度下降,改善了PPC/秸秆粉复合材料的加工性能。因此,作为增容剂的CPPC为制备高性能PPC/天然纤维复合材料提供了新的解决办法。     

Banana fiber-reinforced biodegradable soy protein composites

Banana fiber, a waste product of banana cultivation, has been used to prepare banana fiber reinforced soy protein composites. Alkali modified banana fibers were characterized in terms of density, denier and crystallinity index. Fourier transformed infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA) were also performed on the fibers. Soy protein composites were prepared by incorporating different volume fractions of alkali-treated and untreated fibers into soy protein isolate (SPI) with different amounts of glycerol (25%–50%) as plasticizer. Composites thus prepared were characterized in terms of mechanical properties, SEM and water resistance. The results indicate that at 0.3 volume fraction, tensile strength and modulus of alkali treated fiber reinforced soy protein composites increased to 82% and 963%, respectively, compared to soy protein film without fibers. Water resistance of the composites increased significantly with the addition of glutaraldehyde which acts as cross-linking agent. Biodegradability of the composites has also been tested in the contaminated environment and the composites were found to be 100% biodegradable.     

Mechanical Properties and Dynamic Mechanical Analysis of Thermoplastic-Natural Fiber/Glass Reinforced Composites

The mechanical properties and dynamic behavior of thermoplastic composites based on polypropylene/glass fibers and polypropylene/natural fibers (i.e. kenaf, hemp, flax) are presented. A survey is given on some aspects, crucial for the use of these composites in structural and non-structural components such as their vibration-damping response, in relation to the composite compaction level and the manufacturing procedure. In order to investigate a wide vibration frequency range, including acoustic frequencies, different testing techniques, both with forced and free vibrations, were applied. A comparison between natural fiber and glass fiber reinforced laminates is presented. Compaction levels, allowing to obtain the best compromise between mechanical performance and damping response, are investigated.     

A Comparative Study of Modified and Unmodified High-Density Polyethylene/Borassus Fiber Composites

In this work, composite samples were prepared using Borassus fibers and a high-density polyethylene matrix. Alternatively, a chemically modified matrix (maleic anhydride grafted HDPE) was also used to improve fiber-matrix compatibility. The effect of fiber loading on the mechanical properties was investigated. Borassus fiber/modified HDPE composites exhibited improved mechanical performance as compared to pure HDPE composites. SEM studies on the fractured specimens of unmodified HDPE fiber composites reveal the poor fiber-matrix interaction, whereas the interaction is strong with enhanced mechanical properties for modified HDPE fiber composites. This is due to an improvement of the chemical bonding between the modified HDPE matrix and the Borassus fiber as also supported by Fourier transform infrared spectroscopy results. Thermal stability was also found to be enhanced slightly for modified HDPE composites.     

Effect of Layering Pattern on the Mechanical Properties of Bark Cloth (Ficus natalensis) Epoxy Composites

The quest for sustainable materials as a consequence of a global drive to mitigate climate change has led to a focus on natural fiber–reinforced composite materials. In this study, skillful ply angle arrangement of bark cloth–reinforced laminar epoxy composites was carried out for the first time using vacuum-assisted resin transfer molding, and the composites fabricated were characterized for the effect of the layering pattern on their static and dynamic mechanical properties. Tensile strength and flexural strength were shown to be dependent on the ply angle arrangement. Dynamic mechanical analysis of the composites showed a glass transition temperature of 70°C, and the storage modulus and mechanical damping properties showed that the developed composites can withstand considerable loads and have excellent fiber-to-matrix adhesion.     

Investigation of the dielectric,mechanical, and thermal properties of noncovalent functionalized MWCNTs/polyvinylidene fluoride (PVDF) composites

To improve the dispersion of multi‐walled walled carbon nanotubes (MWCNTs) and investigate the effect of dispersant for MWCNTs functionalization on the dielectric, mechanical, and thermal properties of Polyvinylidene fluoride (PVDF) composites, two different dispersants (Chitosan and TritonX‐100) with different dispersion capability and dielectric properties were used to noncovalently functionalize MWCNTs and prepare PVDF composites via solution blending. Fourier transform infrared, X‐Ray diffraction, and Raman spectroscopy indicated that TritonX‐100 and Chitosan were noncovalent functionalized successfully on the surface of MWCNTs. With the functionalization of Chitosan and TritonX‐100, the dispersion of MWCNTs changed in different extent, which was investigated by dynamic light scattering and confocal laser scan microscopy. The dielectric, mechanical, and thermal properties of PVDF composites were also improved. Meanwhile, it was also found that the dielectric properties of PVDF composites are closely related to the dielectric properties of dispersant. High dielectric constant of dispersant contributes to the grant dielectric constant of PVDF composites. The mechanical and thermal properties of MWCNTs/PVDF composites largely depend on the dispersion of MWCNTs in PVDF, interfacial interactions and the residual solvent. Copyright © 2016 John Wiley & Sons, Ltd.     

Impact of surface adaptation and Acacia nilotica biofiller on static and dynamic properties of sisal fiber composite

Nowadays, the awareness of the public along with strict legitimate forces over the use of polymers, the manufacturing and automotive industries started using the renewable materials. Since, natural fiber reinforced composites play vital role in developing lightweight structural materials, this study focuses on utilizing sisal fiber as reinforcement in polyester matrix along with natural filler. The influence of fiber length and fiber volume fraction on the mechanical properties of sisal fiber was studied initially. Test results revealed that the composite with 20?mm fiber length and 20-volume fraction composite has better mechanical properties. Furthermore, the effect of fiber surface modification has been analyzed using various chemical solutions such as NaOH, KMnO₄, stearic acid, and maleic acid. Of these, NaOH treatment enhances the mechanical properties of composite compared to all other cases. Finally, the influence of Acacia nilotica, a natural filler addition into the alkali-treated sisal fiber composite has been evaluated by mechanical and dynamic mechanical properties. It is found that the addition of natural filler and surface treatment has enhanced the properties of composites due to their synergetic effect. This effect improves the adhesion and uniform stress transfer among the reinforcements. The fiber surface morphology was evaluated using micrographs obtained from scanning electron microscope.