Characterization and antimicrobial properties of metal complexes of polypropylene fibers grafted with acrylic acid using gamma irradiation

Polypropylene fibers were treated against microbial effects by gamma radiation‐induced grafting of acrylic acid, followed by metal complexation with Zn²⁺ or Ag⁺ metal ions. The treated polypropylene fibers were characterized by using Fourier transform infrared spectroscopy and scanning electron microscopy. The effect of the treatment on the thermal stability was investigated by using thermogravimetric analysis, in which a slight increase in the major thermal stability was observed. The antimicrobial activity of the treated fibers was also evaluated. On the basis of the obtained results, it was found that the antimicrobial properties of the treated fibers were enhanced both qualitatively, as indicated by the distinct inhibition zone diameter towards Gram‐positive as well as Gram‐negative bacterial strains under study, and quantitatively, in which 100% inhibition of Staphylococcus aureus and Escherichia coli was achieved. Copyright © 2015 John Wiley & Sons, Ltd.     

Calotropis gigantea fibers: A potential reinforcement for polymer matrices

Natural fibers are identified as one of the effective alternatives for reinforcing the polymer matrices on account of their sustainability and renewable characteristics by replacing the synthetic fibers. This study is intended to apprehend the properties of the fibers derived from the stem of Calotropis gigantea plant. The functional groups of biopolymers were recognized by Fourier transform infrared spectrum. The crystalline nature of the cellulose that represents the mechanical strength and integrity of the fibers was found from the X-ray diffraction, whereas the thermal behavior was studied by thermogravimetric analysis. Scanning electron microscope was used to study the morphology of the fibers. The results of these analytical studies have shown that the crystallinity index of the fibers was 56.08% and the fibers were able to withstand a temperature of about 220°C proving that the fibers can be used as effective reinforcements for polymer matrices similar to the commonly used bio-fibers.     

Effect of montmorillonite content and the type of its modifier on the thermal properties and flammability of polyimideamide nanocomposite fibers

The effects of montmorillonite (MMT) content (1, 3, 5%) and the type of its modifiers on the thermal properties and flammability of PIA nanocomposite fibers have been assessed. Sodium montmorrilonite was modified with aminododecane acid and octadecylamine. Samples of PIA nanocomposite containing commercial MMT: Nanomer PGW from Nanocor were also included in the comparative analysis. It has been found that the glass transition temperature (T _g) of the fibers under investigation depends on the type of MMT’s modifier. On the other hand this parameter does not affect the thermal stability of fibers defined with T ₅ and T ₅₀ indicators since the thermal decomposition of modifiers takes place at lower temperatures.     

Physicochemical properties of new cellulosic fibers from the bark of Acacia arabica

With the growing environmental consciousness toward carbon emissions, natural fibers are the best alternative and act as a substitute for synthetic fibers due to their potential properties. New cellulosic fibers were identified from Acacia arabica bark. This study aimed at understanding the characteristics of Acacia arabica fibers (AAFs) extracted from the bark of the A. arabica, and its physicochemical properties were examined by thermal stability analyses, X-ray diffraction, chemical constitutions, and Fourier transform infrared spectroscopy analysis. Cellulose content (68.1 wt%), density (1028 kg m^?3), and crystallinity index (51.72%) properties were identified.     

Characterization of new natural cellulosic fiber from the Ipomoea staphylina plant

Natural fibers extracted from plants play a major role as reinforcement in polymer composite materials due to their superior properties. This work aims to comprehensively characterize the physical and chemical properties of Ipomoea staphylina fibers (ISFs), which are extracted from the stem of the Ipomoea staphylina plant. The ISFs show cellulose content (72.76 wt%), hemicelluloses content (13.6 wt%), density (1401 kg cm^?3), and tensile strength of 173–658 MPa with a strain rate of 2.03–6.63%. The thermal stability of ISFs illustrate that the fibers are stable up to a temperature of 311°C with kinetic activation energy of 99.82 kJ mol^?1.     

Mechanical properties of BPDA-ODA polyimide fibers

An aromatic polyimide was synthesized via a one-step polycondensation reaction between biphenyltetracarboxylic dianhydride (BPDA) and 4,4′-oxydianiline (ODA) in p-chlorophenol. The polyimide (BPDA-ODA) solution dopes were spun into fibers by means of dry-jet wet spinning. The as-spun fibers were drawn and treated in heating tubes for improving the mechanical properties. The thermal treatment on the fibers resulted in a relatively high tensile strength and modulus. Thermal mechanical analysis (TMA) was employed to study the linear coefficient of thermal expansion (CTE). Thermal gravimetry analysis (TGA) spectra showed that the BPDA-ODA fibers possessed an excellent property of thermo-oxidative degradation resistance. The sonic modulus E_s of the polyimide fibers was measured.     

Identification and quantification of anthocyanins,flavonoids, and phenolic acids in flowers of Rhododendron arboreum and evaluation of their antioxidant potential

The current study aimed to investigate the anthocyanins, non-anthocyanins (flavonoids and phenolic acids), and free radicals scavenging potential in the flowers of Rhododendron arboreum using ultra high performance liquid chromatography with ion mobility quadrupole time of flight tandem mass spectrometry. A total of 25 constituents including nine anthocyanins, six phenolic acids, and ten flavonoids were identified in the flower extract. The major anthocyanins identified were cyanidin-3-O-β-galactoside ( 1 ), cyanidin-3-O-α-arabinoside ( 4 ), and cyanidin-3-O-rhamnoside ( 8 ), while quercetin glycosides were the main identified flavonoids in R. arboreum flowers. Additionally, ultra high performance liquid chromatography methods were developed and validated for the quantification of nine compounds (anthocyanins, flavonoid glycosides, and phenolic acids); five of them were quantified using internal standards. The extracts were analyzed for total phenolics (123.6 mg GAE/g), anthocyanin content (1.76% w/w), and evaluated for antioxidant properties against 2,2-diphenyl-1-picrylhydrazyl radical (IC₅₀: 102.06 and 96.92 μg/mL) and 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) radical cation (112.25 and 45.59 μM TE/g) assays. The profiling of R. arboreum for anthocyanins is reported for the first time. The findings suggest that the flowers are a promising source of bioactive constituents and could be used as functional food, antioxidants, and nutraceuticals.     

The Thermal Degradation Mechanism and Thermal Mechanical Properties of Two High Performance Heterocyclic Polymer Fibers

The thermal mechanical properties and degradation behaviors were studied on fibers prepared from two high-performance, heterocyclic polymers, poly(p-phenylenebenzobisthiazole) (PBZT) and poly(p-phenylenebenzobisoxazole) (PBZO). Our research demonstrated that these two fibers exhibited excellent mechanical properties and outstanding thermal and thermo-oxidative stability. Their long-term mechanical tensile performance at high temperatures was found to be critically associated with the stability of the C—O or C—S linkage at the heterocyclic rings on these polymers' backbones. PBZO fibers with the C—O linkages displayed substantially higher thermal stability compared to PBZT containing C—S linkages. High resolution pyrolysis-gas chromatography/mass spectrometry provided the information of the pyrolyzates' compositions and distributions as well as their relationships with the structures of PBZT and PBZO. Based on the analysis of the compositions and distributions of all pyrolyzates at different temperatures, it was found that the thermal degradation mechanisms for both of these heterocyclic polymers were identical. Kevlar®-49 fibers were also studied under the same experimental conditions in order to make a comparison of thermo-oxidative stability and long-term mechanical performance at high temperatures with PBZO and PBZT fibers. The data of two high-performance aromatic polyimide fibers were also included as references.This revised version was published online in November 2005 with corrections to the Cover Date.     

Investigation of Physico-Chemical Properties of Alkali-Treated Prosopis juliflora Fibers

There is ever-increasing interest in using natural fibers in polymer composite systems and textile industry. Prosopis juliflora fibers (PJFs) possess ideal characteristics that make them suitable for various applications. Alkali treatment of PJFs was primarily aimed to change their physico-chemical properties; 5% (w/v) NaOH concentration and 60 min of soaking time were found to be optimal. It is intriguing to note that optimally treated PJFs had higher cellulose (72.27 wt.%), lower hemicellulose (4.02 wt.%) and lignin (12.09 wt.%) contents, higher crystallinity index (73%), tensile strength, and thermal stability.     

Untreated and alkali treated fibers from Alfa stem: effect of alkali treatment on structural,morphological and thermal features

Alfa stems are rich in cellulose and they are an inexpensive, easily renewable source of natural fibers with the potential for polymer reinforcement. However, large amounts of non-cellulosic materials, surface impurities and low degradation temperature make natural fibers less attractive for reinforcement of polymeric materials, unless they can be modified in a proper way. In this paper, Alfa stems were treated with NaOH solution with two different concentrations (1 and 5 wt%). Raw and treated stems were crushed to obtain fibers. Stems and fibers were characterized by scanning electron microscopy (SEM) and optical microscopy, respectively. Their crystallinity index was determined by X-ray diffraction, thermal stability by thermogravimetry and structural change by FT-IR and ¹³C NMR spectroscopy. Comparison and analysis of results confirmed some thermal, structural and morphological changes of the fibers after treatment due to removal of some non-crystalline constituents from the plant. SEM showed rougher surfaces after alkalization. FT-IR and ¹³C NMR showed a gradual improvement in cellulose level by alkali treatment with increasing NaOH concentration. The crystallinity index and thermal stability of treated Alfa fibers were also found to be improved.     

The effect of thermal stress on the thermal expansion coefficient and glass transition temperature of glass fiber–polymer composites

The thermal expansion coefficients of glass fiber–polymer composites were calculated applying the solid cylindrical model taking into account the interaction effects among the glass fibers. The stress and displacement in the composite model were determined as functions of the thermal stress. It was found theoretically that the deviation of the thermal expansion coefficient from the linear mixture relationship based on volume additivity appeared at around T_g + 20 K upon cooling. The thermal expansion coefficient of the composite was also found to be markedly dependent on the dispersion state of the glass fibers. An expression for the difference in the T_g of the matrix resin in the composite from that in the unloaded resin was obtained on the assumption that the volume change of the matrix resin caused by mixing was compensated by free volume expansion. The experimental results obtained by differential scanning calorimetry (DSC) measurements were found to agree well with the theoretically predicted ones.     

Effects of take‐up speed on the structure and properties of melt‐spun poly(L‐lactic acid) fibers

Poly(L ‐lactic acid) (PLLA) filament fibers were prepared by one‐step melt spinning process and the effects of variations in take‐up speed on their thermal properties, mechanical properties, and crystalline structures were investigated. Differential scanning calorimetry (DSC) results revealed that the PLLA fibers showed multiple melting peaks and that the melting peak appearing at a lower temperature moved lower while that at a higher temperature moved higher with increasing take‐up speed. The glass transition temperature (T_g) obtained from dynamic mechanical analysis (DMA) increased with increasing take‐up speed. The tenacity increased and the boiling water shrinkage (BWS) decreased with increasing take‐up speed. However, these mechanical and thermal properties were stabilized at take‐up speeds over 3500 m/min. The melt‐spun PLLA fibers of this study showed an α‐form crystal structure which was not affected by the take‐up speed. The change in the tendency of the thermal and mechanical properties at around 3500 m/min did not appear to result from the change in crystal form but rather from the change in crystallite size and crystallite orientation. Copyright © 2008 John Wiley & Sons, Ltd.     

Characterization of new natural cellulosic fiber from the Perotis indica plant

This investigation summarizes the characteristics of biofiber extracted from the Perotis indica plant. Cellulose content (68.4 wt%), density (785 kg m^?3), crystallinity index (48.3%), tensile strength (317–1,608 MPa), and Young’s modulus (8.41–69.61 GPa) properties were identified in the P. indica fibers (PIFs), and thermal stability was studied using thermal gravimetric analysis and derivative thermogravimetric analysis, which revealed its cellulose degradation at a temperature of 339.1°C. Further, the properties of PIFs ensured that it can play an imperative role as new reinforcement as green composites in the manufacturing industries.     

Impact of alkali treatment on physico-chemical,thermal, structural and tensile properties of Carica papaya bark fibers

This study aims to examine the effect of sodium hydroxide (NaOH) treatment on the physico-chemical properties, structure, thermal, tensile and surface topography of Carica papaya fibers (CPFs). The surface of raw CPFs was modified by soaking with 5% NaOH solution for 15, 30, 45, 60, 75 and 90?min. The results of thermo-gravimetric analysis revealed that the optimum treatment time for alkali treatment was 60?min. It was found that the alkali treatment improved the properties of the CPFs. The results of TGA, FT-IR, XRD and AFM suggest that the treated CPF is a suitable alternative as reinforcement in polymer composites.     

Extraction and characterization of new natural lignocellulosic fiber Cyperus pangorei

This research is focused on the study of the physical, chemical, mechanical, and thermal properties of a newly identified natural stem fiber, Cyperus pangorei. The chemical composition of Cyperus pangorei fibers (CPF) such as cellulose, lignin, ash, moisture, and wax contents was evaluated. Besides these, the fiber density was determined and the apparent diameter was measured using an optical microscope. Further, tensile, thermal, XRD, and FT-IR studies were performed to evaluate the suitability of the fiber as a reinforcement. The surface topography of CPF was analyzed using scanning electron microscopy (SEM). Encouraging properties such as increased stiffness, fiber texture, and higher thermal stability suggest the suitability of CPF as reinforcement in polymer matrices.     

Exploration on the characteristics of cellulose microfibers from Palmyra palm fruits

To obtain cellulose microfibers from Palmyra palm fruit fibers, a new succession of specific chemical treatments including acidified chlorination, alkalization, and acid hydrolysis have been developed. Cellulose microfibers obtained were characterized by different techniques. The chemical analysis indicated an increase in α-cellulose content and decrease in lignin and hemicellulose for the cellulose microfibers over raw fibers. Fourier transform infrared and ¹³C NMR spectra confirmed the removal of non-cellulosic (lignin and hemicellulose) components after chemical treatments. The X-ray diffraction results revealed that the cellulose I was partly transformed into cellulose II by chemical treatments and the crystallinity index of cellulose microfibers was significantly increased as compared to raw fibers owing to removal of non-cellulosic components. Thermogravimetric analysis results demonstrated that the thermal stability was enhanced noticeably for cellulose microfibers than for the raw fibers. The scanning electron micrographs illustrated cleaner and rough surfaces for the cellulose microfibers when compared to those of raw fibers.     

Thermal and mechanical characteristics of polyurethane/curaua fiber composites

Polyurethane composites reinforced with curaua fiber at 5, 10 and 20% mass/mass proportions were prepared by using the conventional melt-mixing method. The influence of curaua fibers on the thermal behavior and polymer cohesiveness in polyurethane matrix was evaluated by dynamic mechanical thermal analysis (DMTA) and by differential scanning calorimetry (DSC). This specific interaction between the fibers and the hard segment domain was influenced by the behavior of the storage modulus E′ and the loss modulus E″ curves. The polyurethane PU80 is much stiffer and resistant than the other composites at low temperatures up to 70°C. All samples were thermoplastic and presented a rubbery plateau over a wide temperature range above the glass transition temperature and a thermoplastic flow around 170°C.     

Biocomposites based on Alfa fibers and starch‐based biopolymer

Biocomposite materials based on Alfa cellulose fibers (esparto grass plant) as reinforcing element and starch‐based biopolymer matrix were prepared and characterized in terms of mechanical performance, thermal properties, and water absorbance behavior. The fibers and the matrix were first mixed in the melted state under mechanical shearing using a plastograph and the obtained composites were molded by injection process. The tensile mechanical analysis showed a linear increase of the composite flexural and tensile modulus upon increasing the fiber content, together with a sharp decrease of the elongation at break. The fibers′ incorporation into the biopolymer matrix brings about an enhancement in the mechanical strength and the impact strength of the composite. Dynamic mechanical thermal analysis (DMTA) investigation showed two relaxations occurring at about ?30 and 35°C. The addition of Alfa fibers enhanced the storage modulus E′ before and after T_α, which is consistent with the reinforcing effect of Alfa cellulose fibers. Copyright © 2008 John Wiley & Sons, Ltd.     

Thermal degradation of wood treated with guanidine compounds in air: Flammability study

Wood has been treated with guanidine phosphate, guanidine nitrate, guanidine carbonate and guanidine chloride to impart flame retardancy. The samples were subjected to differential thermal analysis (DTA) and thermogravimetry (TG) from ambient temperature to 800°C in air to study their thermal behaviors. From the resulting data, kinetic parameters for different stages of thermal degradation were obtained following the method of Broido. For the decomposition of wood and flame retardant wood, the activation energy was found to decrease from 116 to 54 kJ mol^–1; the char yield was found to increase from 5.6 to 34.9%, LOI from 18 to 41.5, which indicated that the flame retardancy of treated wood was improved. Effects of the different compounds on the degradation and flammability of wood have also been proposed.This revised version was published online in November 2005 with corrections to the Cover Date.     

Extraction and characterization of natural cellulosic fiber from Passiflora foetida stem

This article presents a comprehensive characterization study of natural cellulosic fiber extracted from Passiflora foetida vine stem. The chemical composition of the obtained P. foetida fibers (PFFs) comprised high cellulose (77.9 wt%) and low lignin (10.47 wt%) content and had distinctly higher crystallinity (67.36%) of cellulose, which was determined by an X-ray diffractometer. The PFFs exhibited good tensile strength of 248?942 MPa associated with elongation (1.38?4.67%) during tensile testing. Thermogravimetric analysis revealed that the PFFs are thermally stable up to 320°C with kinetic activation energy of 85.46 kJ mol^?1; hence they ensure their suitability as a reinforcing phase in composites for potential applications.