Vapor Pressure Osmometry and Its Applications in the Osmotic Coefficients Determination of the Aqueous Monomer Glycol and Polymer Polyethylene Glycol Solutions at Various Temperature

Based on the principle and calibration of vapor pressure osmometer and its application in the thermodynamics of the aqueous solutions, the results on aqueous solution of monomer glycol,PEG200,PEG400,PEG1500 and PEG2000 over the different concentration range at various temperatures were reported.Using a linear least-square fitting routing,the osmotic coefficients were fitted by a simple polynomial equation.It was found that the relationship between the molar osmotic coefficients (Φ） and the molar concentration(c) of the solutions are in a quite good agreement with the fitted polynomial equation at various temperatures over the different concentration range.The experimental results also show that over the studied concentration range and at various temperatures,the concentration dependence of the molar osmotic coefficients of the aqueous solution systems with the solutes of PEG200,PEG400,PEG1500 and PEG2000 are totally presented in a rising tend,and their temperature dependence of the osmotic coefficients of the aqueous solution systems of the molar concentration exhibits their own regularities,respectively.The aqueous glycol solution system exhibits the properties of the dilute solution.     

Studies on calcium‐containing poly(urethane ether)s

The calcium salt of mono(hydroxyethoxyethyl)phthalate [Ca(HEEP)₂] was synthesized by the reaction of diethylene glycol, phthalic anhydride, and calcium acetate. Calcium‐containing poly(urethane ether)s (PUEs) were synthesized by the reaction of hexamethylene diisocyanate (HMDI) or tolylene 2,4‐diisocyanate (TDI) with a mixture of Ca(HEEP)₂ and poly(ethylene glycol) (PEG₃₀₀ or PEG₄₀₀) with di‐n‐butyltin dilaurate as a catalyst. A series of calcium‐containing PUEs of different compositions were synthesized with Ca(HEEP)₂/PEG₃₀₀ (or PEG₄₀₀)/diisocyanate (HMDI or TDI) molar ratios of 2:2:4, 3:1:4, and 1:3:4 so that the coating properties of the PUEs could be studied. Blank PUEs without calcium‐containing ionic diols were also prepared by the reaction of PEG₃₀₀ or PEG₄₀₀ with HMDI or TDI. The PUEs were well characterized by Fourier transform infrared, ¹H and ¹³C NMR, solid‐state cross‐polarity/magic‐angle‐spinning ¹³C NMR, viscosity, solubility, and X‐ray diffraction studies. The thermal properties of the polymers were also studied with thermogravimetric analysis and differential scanning calorimetry. The PUEs were applied as top coats on acrylic‐coated leather, and their physicomechanical properties were also studied. The coating properties of PUEs, such as the tensile strength, elongation at break, tear strength, water vapor permeability, flexing endurance, cold crack resistance, abrasion resistance, color fastness, and adhesive strength, were better than the standard values. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2865–2878, 2003     

Synthesis and characterization of calcium containing poly(urethane-ether)s

Calcium containing poly(urethane-ether)s (PUEs) were synthesized by the reaction of hexamethylene diisocyanate or toluylene 2,4-diisocyanate (HMDI or TDI) with a mixture of calcium salt of mono(hydroxybutyl)phthalate [Ca(HBP)₂] and polyethylene glycol (PEG₂₀₀ or PEG₄₀₀). A series of calcium containing PUEs having different composition were synthesized by taking the mole ratio of Ca(HBP)₂:PEG₂₀₀ or PEG₄₀₀:diisocyanate (HMDI or TDI) as 3:1:4, 2:2:4 and 1:3:4 to study the effect of calcium content on the properties of the copolymer. The structure of the polymers were confirmed by IR, ¹H-NMR, ¹³C-NMR, and solid state ¹³C-CP-MAS NMR. The polymers were soluble in dimethyl sulfoxide and dimethyl formamide. The initial decomposition temperature of the polymers decreases with increase in calcium content. The T_g value of PUEs increases with increase in calcium content and decreases with increase in soft segment content and length. A single T_g value is observed for the calcium containing PUEs based on PEG₂₀₀ shows the presence of homogeneous phase. However, two T_g values for the PUEs based on PEG₄₀₀ for various composition of Ca(HBP)₂, PEG₄₀₀ and diisocyanate (HMDI or TDI) shows the presence of heterogeneous phase. The viscosity of the calcium containing PUEs increases with increase in the soft segment content as well as its length and decreases with increase in calcium content. X-ray diffraction patterns of the polymers show that the HMDI based polymers are partially crystalline and TDI based polymers are amorphous in nature. The dynamic mechanical analysis of the calcium containing PUEs based on HMDI shows that at any given temperature modulus (g^′ and g^″) increases with increase in the ionic content in the polymers.     

温控聚乙二醇两相体系中纳米钯催化肉桂醛选择性加氢反应

将具有“高温混溶、室温分相”功能的聚乙二醇4000(PEG₄₀₀₀)与甲苯-正庚烷组成的两相体系用于纳米钯催化的肉桂醛选择性加氢反应中.在优化的反应条件下,肉桂醛转化率和氢化肉桂醛选择性分别为99%和98%.钯纳米催化剂经简单分相即可与产物分离,且循环使用8次,其活性和选择性基本保持不变.     

Synthesis of zinc-containing poly(urethane-ether)s based on zinc salt of mono(hydroxypentyl)phthalate

Zinc salt of mono(hydroxypentyl)phthalate, Zn(HPP)₂, was synthesized by reacting 1,5-pentanediol, phthalic anhydride and zinc acetate. Zinc-containing poly(urethane-ether)s (PUEs) were synthesized by reacting hexamethylene diisocyanate (HMDI) or toluene 2,4-diisocyanate (TDI) with a mixture of Zn(HPP)₂ and poly(ethylene glycol) (PEG₃₀₀ or PEG₄₀₀) in dimethylsulfoxide (DMSO) at 95 °C under nitrogen atmosphere using di-n-butyltin dilaurate as a catalyst. Blank PUEs without Zn(HPP)₂ were also prepared by reacting PEG₃₀₀ or PEG₄₀₀ with HMDI or TDI under similar conditions. The structure of the polymers was confirmed by FT-IR, ¹H NMR, ¹³C NMR, and solid-state ¹³C-CP-MAS NMR spectra. The zinc-containing polymers were soluble in only highly polar solvents. The inherent viscosity of the zinc-containing PUEs was found to be very low. X-ray diffraction studies revealed that HMDI-based (PUEs) were partially crystalline while TDI based (PUEs) were amorphous. The T_g values of the zinc-containing PUEs were found to be low and range from 5.3 to 7.5 °C. The thermogravimetric analysis revealed the influence of zinc on the initial decomposition and the overall thermal stability of the polymers.     

Building multipurpose nano-toolkit by rationally decorating NIR-II fluorophore to meet the needs of tumor diagnosis and treatment

Phototheranostics have attracted tremendous attention in cancer diagnosis and treatment because of the noninvasiveness and promising effectiveness. Developing advanced phototheranostic agents with long emission wavelength, excellent biocompatibility, great tumor-targeting capability, and efficient therapeutic effect is highly desirable. However, the mutual constraint between imaging and therapeutic functions usually hinders their wide applications in biomedical field. To balance this contradiction, we herein rationally designed and synthesized three novel tumor-targeted NIR-II probes (QR-2PEG₃₂₁, QR-2PEG₁₀₀₀, and QR-2PEG₅₀₀₀) by conjugating three different chain lengths of PEG onto an integrin α_vβ₃-targeted NIR-II heptamethine cyanine fluorophore, respectively. In virtue of the essential amphiphilic characteristics of PEG polymers, these probes display various degree of aggregation in aqueous buffer accompanying with differential NIR-II imaging and photothermal (PTT) therapeutic performance. Both in vitro and in vivo results have demonstrated that probe QR-2PEG₅₀₀₀ has the best NIR-II imaging performance with prominent renal clearance, whereas QR-2PEG₃₂₁ possesses excellent photoacoustic signal as well as PTT effect, which undoubtedly provides a promising toolbox for tumor diagnosis and therapy. We thus envision that these synthesized probes have great potential to be explored as a toolkit for precise diagnosis and treatment of malignant tumors.     

Convenient and efficient method for synthesis of 2,4,6-triarylpyridines using catalytic amount of PEG1000-based dicationic acidic ionic liquid under solvent-free conditions

A convenient and efficient method for synthesis of substituted 2,4,6-triarylpyridines by the reaction of chalcones and ammonium acetate or via one-pot, three-component condensation of aromatic aldehydes with acetophenones and ammonium acetate has been developed by using the efficient catalyst PEG₁₀₀₀-based dicationic acidic ionic liquid (PEG₁₀₀₀-DAIL) under solvent-free conditions. Recycling studies have shown that the PEG₁₀₀₀-DAIL can be readily recovered and reused several times without significant loss of activity.     

Structural Analysis and Properties of Organic-Inorganic Hybrid Ionic Conductor Prepared by Sol-Gel Process

Organic-inorganic hybrid lithium ion conductors were prepared by the sol-gel process. The hybrid ion conductor will be used as the electrolyte for Li based high-energy density batteries. The hybrid ion conductor was prepared from a mixture of tetramethyl orthosilicate (TMOS), polyethylene glycol 200 (PEG₂₀₀), lithium perchlorate (LiClO₄) and water. A wet gel was prepared at room temperature. The gels dried at 80°C under vacuum did not contain water. The dried hybrid ion conductor gel had homogeneity and high transparency. Ionic conductivity of the hybrid sample was measured by the complex impedance method and it increased with increasing PEG₂₀₀ content. The dried hybrid gel that contained no LiClO₄ did not show ion conduction. Conductivity on the order of 10^–5 S·cm^–1 at room temperature was obtained. Structural characterization was done by Fourier Transform Infrared Spectra (FTIR) and NMR measurement of ¹³C and ¹H, and the thermal stability and glass transition properties were studied by DSC. Glass transition temperature decreased with increasing PEG₂₀₀ content and increased with increasing [Li]/[O] ratio (the oxygen considered is from the polyethylene glycol). Existence of the Si–O–(C₂H₄O) _n –bond and the C–OH bond in the framework of the organic and inorganic phases was confirmed. TMOS and PEG₂₀₀ were hydrolyzed and condensed. The organic and inorganic phases were chemically bonded and the microstructure of the hybrid matrix was shaped as comb. The comb shape leads to high ionic conduction.     

Reversibly light‐responsive biodegradable poly(carbonate) micelles constructed via CuAAC reaction

Light‐responsive poly(carbonate)s PEG₁₁₃‐b‐PMPC_n‐SP were synthesized via copper catalyzed azide‐alkyne cycloaddition reaction between azide‐modified spiropyran (SP‐N₃) and amphiphilic copolymer PEG₁₁₃‐b‐PMPC_n. PEG₁₁₃‐b‐PMPC₂₅‐SP can self‐assemble to biocompatible micelles with an average diameter of ～96 nm and a critical aggregation concentration of 0.0148 mg mL^?1. Under 365 nm UV light irradiation, the characteristic absorption intensity of merocyanine (MC) progressively increased and most of the micellar aggregations were disrupted within 10 min, suggesting the completion of the transformation of hydrophobic SP to hydrophilic MC. Subsequent exposuring the micelles to 620 nm visible light, spherical micelles aggregated again. The light‐controlled release and re‐encapsulation behaviors of coumarin 102‐loaded micelles were further investigated by fluorescence spectroscopy. This study provides a convenient way to construct smart poly(carbonate)s nanocarriers for controlled release and re‐encapsulation of hydrophobic drugs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 750–760     

Visible-Light-Induced Cysteine-Specific Bioconjugation: Biocompatible Thiol–Ene Click Chemistry

Bioconjugation methods using visible-light photocatalysis have emerged as powerful synthetic tools for the selective modification of biomolecules under mild reaction conditions. However, the number of photochemical transformations that allow successful protein bioconjugation is still limited because of the need for stringent reaction conditions. Herein, we report that a newly developed water-compatible fluorescent photosensitizer Q_PEG can be used for visible-light-induced cysteine-specific bioconjugation for the installation of Q_PEG by exploiting its intrinsic photosensitizing ability to activate the S−H bond of cysteine. The slightly modified Q_CAT enables the effective photocatalytic cysteine-specific conjugation of biologically relevant groups. The superior reactivity and cysteine selectivity of this methodology was further corroborated by traceless bioconjugation with a series of complex peptides and proteins under biocompatible conditions.     

Stealth Liposomes (PEGylated) Containing an Anticancer Drug Camptothecin: In Vitro Characterization and In Vivo Pharmacokinetic and Tissue Distribution Study

Numerous attempts to overcome the poor water solubility of cam ptothecin (CPT) by various nano drug delivery systems are described in various sources in the literature. However, the results of these approaches may be hampered by the incomplete separation of free CPT from the formulations, and this issue has not been investigated in detail. This study aimed to promote the solubility and continuous delivery of CPT by developing long-lasting liposomes using various weights (M.W. 2000 and 5000 Daltons) of the hydrophilic polymer polyethylene glycol (PEG). Conventional and PEGylated liposomes containing CPT were formulated via the lipid film hydration method (solvent evaporation) using a rotary flash evaporator after optimising various formulation parameters. The following physicochemical characteristics were investigated: surface morphology, particle size, encapsulation efficiency, in vitro release, and formulation stability. Different molecular weights of PEG were used to improve the encapsulation efficiency and particle size. The stealth liposomes prepared with PEG₅₀₀₀ were discrete in shape and with a higher encapsulation efficiency (83 ± 0.4%) and a prolonged rate of drug release (32.2% in 9 h) compared with conventional liposomes (64.8 ± 0.8% and 52.4%, respectively) and stealth liposomes containing PEG₂₀₀₀ (79.00 ± 0.4% and 45.3%, respectively). Furthermore, the stealth liposomes prepared with PEG₅₀₀₀ were highly stable at refrigeration temperature. Significant changes were observed using various pharmacokinetic parameters (mean residence time (MRT), half-life, elimination rate, volume of distribution, clearance, and area under the curve) of stealth liposomes containing PEG₂₀₀₀ and PEG₅₀₀₀ compared with conventional liposomes. The stealth liposomes prepared with PEG₅₀₀₀ showed promising results with a slow rate of release over a long period compared with conventional liposomes and liposomes prepared with PEG₂₀₀₀, with altered tissue distribution and pharmacokinetic parameters.     

Multi-morphological self-assembled structures of a rod-coil organometallic oligomer

A rod-coil amphiphilic organometallic oligomer based on o-ferrocenylcarbonyl benzoic acid (FcBA) as hydrophobic short rod and poly(ethylene glycol)₁₇ (PEG₁₇) as hydrophilic coil chain was synthesized via Friedel–Crafts acylation and esterification reaction and characterized by ¹H-NMR and FT-IR analyses. The rod-coil oligomer FcBA-PEG₁₇ with short-rod insoluble FcBA segment and long-coil PEG₁₇ segment could self-assemble into multi-morphological aggregates in water such as sphere, rod, strip and vesicle at different initial concentrations, which were characterized by transmission electron microscopy. Interestingly, two different kinds of vesicles were observed, where disfigured vesicles formed at low initial concentration and ideal vesicles at high initial concentration. And the disfigured vesicles can be transferred into ideal vesicles at lower initial concentration through the threading of rigid α-CDs onto the coil PEG₁₇ chains. A possible mechanism for the formation of multi-morphological self-assembled micelles was also proposed.     

Comparative Study of In Situ Loaded Antibody and PEG‐Fab NIPAAM Gels

Hydrogels can potentially prolong the release of a therapeutic protein, especially to treat blinding conditions. One challenge is to ensure that the protein and hydrogel are intimately mixed by better protein entanglement within the hydrogel. N‐isopropylacrylamide (NIPAAM) gels are optimized with poly(ethylene glycol) diacrylate (PEDGA) crosslinker in the presence of either bevacizumab or PEG conjugated ranibizumab (PEG₁₀‐Fab_rani). The release profiles of the hydrogels are evaluated using an outflow model of the eye, which is previously validated for human clearance of proteins. Release kinetics of in situ loaded bevacizumab‐NIPAAM gels displays a prolonged bimodal release profile in phosphate buffered saline compared to bevacizumab loaded into a preformed NIPAAM gel. Bevacizumab release in simulated vitreous from in situ loaded gels is similar to bevacizumab control indicating that diffusion through the vitreous rather than from the gel is rate limiting. Ranibizumab is site‐specifically PEGylated by disulfide rebridging conjugation. Prolonged and continuous release is observed with the in situ loaded PEG₁₀‐Fab_rani‐NIPAAM gels compared to PEG₁₀‐Fab_rani injection (control). Compared to an unmodified protein, there is better mixing due to PEG entanglement and compatibility of PEG₁₀‐Fab_rani within the NIPAAM‐PEDGA hydrogel. These encouraging results suggest that the extended release of PEGylated proteins in the vitreous can be achieved using injectable hydrogels.     

Green and reusable homogeneous oxidative system with ceric ammonium nitrate/[Imim‐PEG1000‐TEMPO] for efficient aerobic oxidation of alcohols and one‐pot synthesis of benzimidazoles from alcohols under ambient conditions

An efficient and reusable catalytic system for aerobic oxidation of alcohols and one‐pot synthesis of benzimidazoles from alcohols with ceric ammonium nitrate and PEG₁₀₀₀–ionic liquid‐immobilized 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) is described. This system shows excellent activity and selectivity, affording the target products with good yields. Moreover, the catalytic system can be recycled and reused without significant loss of catalytic activity after seven runs. Copyright © 2014 John Wiley & Sons, Ltd.     

Salicylaldoxime‐functionalized poly(ethylene glycol)‐bridged dicationic ionic liquid ([salox‐PEG1000‐DIL][BF4]) as a novel ligand for palladium‐catalyzed Suzuki–Miyaura reaction in water

Two novel salicylaldoxime‐functionalized poly(ethylene glycol)‐bridged dicationic ionic liquids ([salox‐PEG₁₀₀₀‐DIL][BF₄] and [salox‐PEG₁₀₀₀‐DIL][PF₆]) were prepared and characterized. [salox‐PEG₁₀₀₀‐DIL][BF₄] was found to be an efficient and recyclable ligand for palladium‐catalyzed Suzuki–Miyaura reaction in water. The catalytic system could be easily recovered and reused for at least five runs only with slight decrease in its activity. Copyright © 2013 John Wiley & Sons, Ltd.     

Effect of the terminal substituent of azobenzene on the properties of ABA triblock copolymers via atom transfer radical polymerization

The effect of the terminal substituent of azobenzene on the properties of ABA triblock copolymers was investigated. For this study, three kinds of azobenzene‐containing monomers with different terminal substituents—6‐[4‐(4‐methoxyphenylazo)phenoxy] hexyl methacrylate, 6‐[4‐(4‐ethoxyphenylazo)phenoxy]hexyl methacrylate, and 6‐[4‐(4‐nitrophenylazo)phenoxy]hexyl methacrylate—were used to synthesize ABA triblock copolymers PMMAzo₂₅–PEG₁₃–PMMAzo₂₅/PMMAzo₁₂–PEG₁₃–PMMAzo₁₂, PEMAzo₁₄–PEG₁₃–PEMAzo₁₄, and PNMAzo₁₄–PEG₁₃–PNMAzo₁₄, respectively, by atom transfer radical polymerization (PMMAzo is poly{6‐[4‐(4‐methoxyphenylazo)phenoxy]hexyl methacrylate}, PEMAzo is poly{6‐[4‐(4‐ethoxyphenylazo)phenoxy]hexyl methacrylate}, and PNMAzo is poly{6‐[4‐(4‐nitrophenylazo)phenoxy]hexyl methacrylate}). These copolymers were characterized with ¹H NMR spectroscopy and gel permeation chromatography and exhibited controlled molecular weights and narrow molecular weight distributions. Differential scanning calorimetry and polarizing optical microscopy showed that these copolymers had mesophases. PMMAzo₂₅–PEG₁₃–PMMAzo₂₅ and PMMAzo₁₂–PEG₁₃–PMMAzo₁₂ had a smectic mesophase and a nematic mesophase, whereas both PEMAzo₁₄–PEG₁₃–PEMAzo₁₄ and PNMAzo₁₄–PEG₁₃–PNMAzo₁₄ had a nematic mesophase. This demonstrated that the liquid‐crystalline properties of these copolymers highly depended on the terminal substituent of azobenzene. The photoresponsive behavior of these copolymers was also investigated in tetrahydrofuran solutions, and the influence of the terminal substituents attached to azobenzene was studied. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5190–5198, 2007     

具有乙二醇侧链的聚谷氨酸酯的合成、表征及其两亲性

聚氨基酸具有良好的生物相容性和规整二级结构, 可作为生物医学材料应用. 如果聚氨基酸具有两亲性, 则能够形成纳米尺寸的胶束结构, 有望作为生物降解药物释放载体. 为得到两亲性的聚谷氨酸, 通过小分子开环聚合的方法直接制备了具有乙二醇侧链的聚谷氨酸酯. 首先制备了γ-(2-(甲氧基)乙基)-L-谷氨酸酯和γ-(2-(2-甲氧基乙氧基)乙基)-L-谷氨酸酯, 然后与三聚光气反应得到其N-羧酸酐(NCA). N-羧酸酐(NCA)单体经开环聚合反应合成了具有乙二醇侧链的聚谷氨酸酯(PEG_nG). 利用IR, ¹H NMR, GPC和吸湿性测定等方法对所合成聚合物进行了详细的表征. 结果表明随着侧链中EG含量的提高, 聚L-谷氨酸酯的亲水性有明显改善. 透射电镜的结果表明, 聚谷氨酸二乙二醇单甲醚酯(PEG₂G)在水溶液中能够形成稳定胶束结构.     

Regioselectivity nitration of aromatics with N2O5 in PEG-based dicationic ionic liquid

Regioselective mononitration of simple aromatic compounds has been investigated with N₂O₅ as nitrating agent and a new PEG200-based dicationic acidic ionic liquid (PEG₂₀₀-DAIL) as catalyst. The results of experiments show that this nitration system can significantly improve the para-selectivity of alkyl-benzenes and the ortho-selectivity of halogenated-benzenes. The PEG₂₀₀-DAIL exhibits recyclable temperature-dependant phase behavior in CCl₄ solvent, and it can be recycled without apparent loss of catalytic activity, and only 5% loss of weight is observed after six times recycling.     

PEG1000-Based Dicationic Acidic Ionic Liquid as an Efficient Catalyst for Mannich-Type Reaction in Water

PEG₁₀₀₀-based dicationic acidic ionic liquid (PEG₁₀₀₀-DAIL) was found to be an efficient and recyclable catalyst for Mannich-type reaction of different ketones with various aromatic aldehydes and aromatic amines in water to give various β-arylamino ketones in good yields. The catalytic system could be easily recovered and reused for at least six runs only with slight decrease in its activity.     

Ionic transport studies on (PEO)6:NaPO3 polymer electrolyte plasticized with PEG400

Conduction characteristics of the poly(ethylene oxide) based new polymer electrolyte (PEO)₆:NaPO₃, plasticized with poly(ethylene glycol) are investigated. Free standing flexible electrolyte films of composition (PEO)₆:NaPO₃ + x wt.% PEG₄₀₀ (30 ? x ? 70) are prepared by solution casting method. A combination of X-ray diffraction (XRD), optical microscopy and differential scanning calorimetry (DSC) studies have indicated enhancement in the amorphous phase of polymer due to the addition of plasticizer. Further, a reduction in the glass transition temperature observed from the DSC result has inferred increase in the flexibility of the polymer chains. The cationic transport number (t_Na⁺) of 0.42 determined through combined ac-dc technique has confirmed ionic nature of conducting species. Ionic conductivity studies are carried out as a function of composition and temperature using complex impedance spectroscopy. The electrolyte with maximum PEG₄₀₀ content has exhibited an enhancement in the conductivity of about two orders of magnitude compared to the host polymer electrolyte. The complex impedance data is analyzed in conductivity, permittivity and electric modulus formalism in order to throw light on transport mechanism. A solid state electrochemical cell based on the above polymer electrolyte with a configuration Na|SPE|(I₂ + acetylene black + PEO) has exhibited an open circuit voltage of 2.94 V. The discharge characteristics are found to be satisfactory as a laboratory cell.