1‐Phosphabicyclo[2.2.1]heptane

1‐Phosphabicyclo[2.2.1]heptanes Exo‐endo‐ and exo‐exo‐2.6‐dimethyl‐1‐phosphabicyclo [2.2.1]heptane have been obtained by cyclization of 2‐methyl‐4‐(2‐propenyl)phospholane in the presence of the complex base, sodium salt of diethylenglycolmonoethylether ‐ sodium amide in THF (NAMEDEG). The bicyclic phosphanes are characterized by reac‐tions with selenium, sulfur, (CH₃)₂SeO, CH₃I and HSO₃F, respectively, elemental analysis, X‐ray crystal structure analysis as well as ¹H, ¹³C, ³¹P NMR spectral measurements. The steric demand of these phosphanes as complex ligands has been estimated from the P, H coupling constants of the phosphonium fluorosulphates according to the Tolman model. The phosphane selenides were found to display the lowest values for the ¹J(Se, P) coupling constant, found up to now for alicyclic and cyclic aliphatic tertiary phosphane selenides. The ⁿJ(P, H)‐ and ⁿJ(H, H)_{n=2, 3} coupling constants have been extracted from the proton spectra at 600 MHz by computerized analysis.     

1‐Phosphabicyclo[3.2.1]octane

1‐Phosphabicyclo[3.2.1]octanes 1‐Phosphabicyclo[3.2.1]octane has been obtained by free‐radical cyclization of (2‐vinyl‐4‐pentenyl)‐phosphane in the presence of AIBN. Another approach to 1‐phosphabicyclo[3.2.1]octanes involves free‐radical cyclization of 2‐methyl‐4‐(2‐propenyl)‐phospholane synthesized by the reaction of [2‐(2‐propenyl)‐4‐pentenyl]‐phosphane with KPH₂/[18]crown‐6 in THF. The bicyclic phosphanes are characterized by reactions with CS₂, selenium, sulfur, NO, CH₃I, and HSO₃F, respectively, structural and analytical data as well as ¹H, ¹³C, ³¹P, ⁷⁷Se NMR spectral measurements. The steric crowding of the phosphanes as complex ligands has been estimated from ³¹P–¹H coupling constants according to the Tolman model. The configuration of the methyl substituents as well as the conformation of the six‐membered ring were determined by NMR parameters (coupling constants, noe's) and proved by X‐ray crystal structure analysis.     

Spectroscopic analysis of imidazolidines. Part II: 1H NMR spectroscopy and conformational analysis of 1,2 and 1,3‐diarylimidazolidines

¹H NMR spectra of a series of 1,2 and 1,3‐diarylimidazolidines are analyzed and correlated with their conformational features. Results were interpreted on the basis of chemical shifts and coupling constants of hydrogen atoms and confirmed by ID nOe difference experiments. 1,3‐Diarylimidazolidines ( 1–7 ) show a fast inversion of the N‐aryl nitrogen in all studied cases. 1,2‐Diaryl‐3‐methyl (or benzyl) imidazolidines ( 8–13 ) display a preferential conformation with a transoid orientation of N₃ and C₂ substituents.     

Über Umlagerungen bei der Cyclialkylierung von Arylpentanolen zu 2,3‐Dihydro‐1H‐inden‐Derivaten, 3. Mitteilung

On Rearrangements by Cyclialkylations of Arylpentanols to 2,3‐Dihydro‐1 H ‐indene Derivatives. Part 3. The Acid‐Catalyzed Cyclialkylation of 3,4‐Dimethyl‐ and 3‐([ ² H ₃ ]Methyl)‐4‐methyl‐3‐phenylpentan‐2‐ol The cyclialkylation of 2‐([²H₃]methyl)‐4‐methyl‐4‐phenyl[1,1,1‐²H₃]pentan‐3‐ol ( 4 ) yielded a 1 : 1 mixture of 1,1‐di([²H₃]methyl)‐2,3‐dimethyl‐1H‐indene ( 5 ) and of 2,3‐dihydro‐2,3‐di([²H₃]methyl)‐1,1‐dimethyl‐1H‐indene ( 6 ) (Scheme 1) [1]. However, it was not clear whether the transposition takes place through the successive migration of a Ph, a Me and again the Ph group (Scheme 2, Path A: shift IV → VII → VIIa ) or through Ph‐, Me‐, and then i‐Pr‐group (Scheme 2, Path B: IV → VII → VIIb ). The cyclialkylation of 3‐([²H₃]methyl)‐4‐methyl‐3‐phenylpentan‐2‐ol ( 7 ) yielded only one product, the 2,3‐dihydro‐2‐([²H₃]methyl)‐1,1,3‐trimethyl‐1H‐indene ( 8 ), in accordance with the migrations according to Path A. This result is also a support for the total mechanism proposed for the cyclialkylation of 4 (Scheme 2). The transition of a tertiary to a secondary carbenium ion is not definitely ensured (see [1]).     

Two conformers of 10,11‐dihydro‐5H‐dibenzo[a,d]cyclo­heptene spiro‐linked with homobenzoquinone epoxide

The crystal structures of the two thermally equilibrated conformational isomers of the epoxide 1′,5′‐dimethyl­spiro[10,11‐dihydro‐5H‐dibenzo[a,d]cyclo­heptene‐5,8′‐4′‐oxatricyclo[5.1.0.0^3,5]octane]‐2′,6′‐dione, C₂₃H₂₀O₃, have been determined by X‐ray diffraction. In the tricyclic dione skeleton, the oxirane and cyclo­propane rings adopt an anti structure with respect to the conjunct quinone frame. The spiro‐linked 10,11‐dihydro‐5H‐dibenzo[a,d]cyclo­heptene ring of the major isomer has a fairly twisted boat form, folding opposite to the adjoining cyclo­propane methyl substituent, whereas the seven‐membered ring of the minor isomer has an almost ideal twist–boat form, inversely folding to the side of the relevant methyl group. The conformational structures of these isomers have been compared with those of the corresponding isomers of the unepoxidized homobenzoquinone.     

Four NiII complexes with the new cyclam–methylimidazole ligand 1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane

Although it has not proved possible to crystallize the newly prepared cyclam–methylimidazole ligand 1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane (L^Im1), the trans and cis isomers of an Ni^II complex, namely trans‐aqua{1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}nickel(II) bis(perchlorate) monohydrate, [Ni(C₁₅H₃₀N₆)(H₂O)](ClO₄)₂·H₂O, (1), and cis‐aqua{1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}nickel(II) bis(perchlorate), [Ni(C₁₅H₃₀N₆)(H₂O)](ClO₄)₂, (2), have been prepared and structurally characterized. At different stages of the crystallization and thermal treatment from which (1) and (2) were obtained, a further two compounds were isolated in crystalline form and their structures also analysed, namely trans‐{1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}(perchlorato)nickel(II) perchlorate, [Ni(ClO₄)(C₁₅H₃₀N₆)]ClO₄, (3), and cis‐{1,8‐bis[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}nickel(II) bis(perchlorate) 0.24‐hydrate, [Ni(C₂₀H₃₆N₆)](ClO₄)₂·0.24H₂O, (4); the 1,8‐bis[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane ligand is a minor side product, probably formed in trace amounts in the synthesis of L^Im1. The configurations of the cyclam macrocycles in the complexes have been analysed and the structures are compared with analogues from the literature.     

1,3‐Dipolar Cycloaddition of Diazo Compounds to Electron‐Deficient Alkenes: Kinetics and Mechanism of Formation of Dimethyl‐4,5‐dihydro‐1H‐pyrazol‐3,5‐dicarboxylate

1,3‐Dipolar cycloaddition of methyl diazoacetate to methyl acrylate was investigated by kinetic ¹Н NMR spectroscopy. It was established that the mechanism of the process includes parallel formation of trans‐ and cis‐dimethyl‐4,5‐dihydro‐3H‐pyrazol‐3,5‐dicarboxylates as a result of [3 + 2]‐cycloaddition of methyl diazoacetate to methyl acrylate; the corresponding rate constants were denoted k_1t and k_1c. The reaction rate of the isomerization of 3Н‐pyrazolines to 4,5‐dihydro‐1H‐pyrazol‐3,5‐dicarboxylate (3Н → 1Н‐pyrazoline rearrangement) was found to be sensitive to both the methyl acrylate (k_2t, k_2c) and 1Н‐pyrazoline concentrations (k_3t, k_3c). Kinetic analysis showed that the proposed scheme is valid for various reagent concentrations. The numerical solution of the system of differential equations corresponded to the reaction scheme and was used to determine the complete set of reaction rate constants (k (× 10⁵ M^–1·s^–1), 298 K; solvent, benzene‐d₆): k_1t = 2.3 ± 0.3, k_1c = 1.6 ± 0.2, k_2t = 1.1 ± 0.3, k_2c = 1.8 ± 0.5, k_3t = 1.2 ± 0.4, k_3c = 2.2 ± 0.7.     

Synthesis and NMR characteristics of N‐acetyl‐4‐nitro,N‐acetyl‐5‐nitro,N‐acetyl‐6‐nitro and N‐acetyl‐7‐nitrotryptophan methyl esters

N‐acetyl‐4‐nitrotryptophan methyl ester (2), N‐acetyl‐5‐nitrotryptophan methyl ester (3), N‐acetyl‐6‐nitrotryptophan methyl ester (4) and N‐acetyl‐7‐nitrotryptophan methyl ester (5) were synthesized through a modified malonic ester reaction of the appropriate nitrogramine analogs followed by methylation with BF₃‐methanol. Assignments of the ¹H and ¹³C NMR chemical shifts were made using a combination of ¹H–¹H COSY, ¹H–¹³C HETCOR and ¹H–¹³C selective INEPT experiments. Copyright © 2008 Crown in the right of Canada. Published by John Wiley & Sons, Ltd     

A 1H NMR and molecular modelling investigation of diastereotopic methylene hydrogen atoms

The ¹H NMR spectra of methyl 3‐bromo‐2‐methylpropionate (1a) and the corresponding chloro compound (2a) show no long‐range coupling between the methyl and methylene protons. In contrast, in the analogous dihalocompounds, methyl 2,3‐dibromo‐2‐methylpropionate (1b) and methyl 2,3‐dichloro‐2‐methylpropionate (2b), one of the methylene protons exhibits a large ⁴J_HH coupling (0.8 Hz) to the methyl group, but the other proton shows no observable splitting. This can be explained quantitatively by calculations of the conformational preferences in these compounds combined with the known orientation dependence of the ⁴J_HHcouplings. One conformer predominates in the dihalo compounds 1b and 2b, and this is responsible for the ⁴J_HH coupling. In 1a and 2a all three conformers are populated and the ⁴J_HH couplings average to zero. The technique is a potentially general method of unambiguously assigning diastereotopic methylene protons. Copyright © 2002 John Wiley & Sons, Ltd.     

A cocrystal of two MoVI complexes bearing different diastereomers of the 2,4‐di‐tert‐butyl‐6‐{[(1‐oxido‐1‐phenylpropan‐2‐yl)(methyl)amino]methyl}phenolate ligand derived from (+)‐ephedrine

The title cocrystal contains two chiral conformational diastereomers, viz. (1S,2R,R_N)‐ and (1S,2R,S_N)‐, of [2,4‐di‐tert‐butyl‐6‐{[(1‐oxido‐1‐phenylpropan‐2‐yl)(methyl)amino]methyl}phenolato](methanol)‐cis‐dioxidomolybdenum(VI), [Mo(C₂₅H₃₅NO₂)O₂(CH₃OH)], representing the first example of a structurally characterized molybdenum complex with enantiomerically pure ephedrine derivative ligands. The Mo^VI cations exhibit differently distorted octahedral coordination environments, with two oxide ligands positioned cis to each other. The remainder of the coordination comprises phenoxide, alkoxide and methanol O atoms, with an amine N atom completing the octahedron. The distinct complexes are linked by strong intermolecular O—H...O hydrogen bonds, resulting in one‐dimensional molecular chains. Furthermore, the phenyl rings are involved in weak T‐shaped/edge‐to‐face π–π interactions with each other.     

Synthesis of 1‐Methyl‐3‐aryl‐substituted Titanocene and Zirconocene Dichlorides and Crystal Structure of Bis[η5‐1‐methyl‐3‐(α, α‐dimethylbenzyl) cyclopentadienyl] titanium Dichloride

The syntheses of a series of l‐methyl‐3‐aryl‐substituted titanocene and zirconocene dichlorides are reported. These complexes are synthesized by the reaction of 2‐ and 3‐methyl‐6, 6‐dimethylfulvenes (1:4) with aryllithium, followed by the reaction with TiCl₄·2THF, ZrCl₄ and (CpTiCl₂)₂O respectively, to give complexes 1–5. The complex [η⁵‐1‐methyl‐3‐(α, α‐dimethylbenzyl) cyclopentadienyl] titanium dichloride has been studied by X‐ray diffraction. The red crystal of this complex is monoclinic, space group P2_t/C with unit cell parameters: a =6.973(6) × 10^?1 nm, b =36.91(2) × 10^?1 nm, c = 10.063(4) × 10^?1 nm, α=β= γ = 93.35(5)°, V = 2584(5) × 10^?3 nm³ and Z = 4. Refinement for 1004 observed reflections gives the final R of 0.088. There are four independent molecules per unit cell.     

Conformations and resulting hydrogen‐bonded networks of hydrogen {phosphono[(pyridin‐1‐ium‐3‐yl)amino]methyl}phosphonate and related 2‐chloro and 6‐chloro derivatives

In the crystal structures of the conformational isomers hydrogen {phosphono[(pyridin‐1‐ium‐3‐yl)amino]methyl}phosphonate monohydrate (pro‐E), C₆H₁₀N₂O₆P₂·H₂O, (Ia), and hydrogen {phosphono[(pyridin‐1‐ium‐3‐yl)amino]methyl}phosphonate (pro‐Z), C₆H₁₀N₂O₆P₂, (Ib), the related hydrogen {[(2‐chloropyridin‐1‐ium‐3‐yl)amino](phosphono)methyl}phosphonate (pro‐E), C₆H₉ClN₂O₆P₂, (II), and the salt bis(6‐chloropyridin‐3‐aminium) [hydrogen bis({[2‐chloropyridin‐1‐ium‐3‐yl(0.5+)]amino}methylenediphosphonate)] (pro‐Z), 2C₅H₆ClN₂⁺·C₁₂H₁₆Cl₂N₄O₁₂P₄²⁻, (III), chain–chain interactions involving phosphono (–PO₃H₂) and phosphonate (–PO₃H⁻) groups are dominant in determining the crystal packing. The crystals of (Ia) and (III) comprise similar ribbons, which are held together by N—H...O interactions, by water‐ or cation‐mediated contacts, and by π–π interactions between the aromatic rings of adjacent zwitterions in (Ia), and those of the cations and anions in (III). The crystals of (Ib) and (II) have a layered architecture: the former exhibits highly corrugated monolayers perpendicular to the [100] direction, while in the latter, flat bilayers parallel to the (001) plane are formed. In both (Ib) and (II), the interlayer contacts are realised through N—H...O hydrogen bonds and weak C—H...O interactions involving aromatic C atoms.     

2(S)‐Amino‐3‐[1H‐imidazol‐4(5)‐yl]­propyl cyclo­hexylmethyl ether di­hydro­chloride and 2(S)‐amino‐3‐[1H‐imidazol‐4(5)‐yl]­propyl 4‐bromo­benzyl ether di­hydro­chloride

(Cyclo­hexyl­methyl­oxy­methyl)(1H‐imidazol‐4‐io­methyl)‐(S)‐ammonium dichloride, C₁₃H₂₅N₃O⁺·2Cl^?, and (4‐bromo­benzyl)(1H‐imidazol‐4‐io­methyl)‐(S)‐ammonium dichloride, C₁₃H₁₈BrN₃O⁺·2Cl^?, are model compounds with different biological activities for evaluation of the hist­amine H3‐receptor activation mechanism. Both title compounds occur in almost similar extended conformations.     

Synthesis and Conformational Analysis of 1′‐ and 3′‐Substituted 2‐Deoxy‐2‐fluoro‐D‐ribofuranosyl Nucleosides

Convergent syntheses of the 9‐(3‐X‐2,3‐dideoxy‐2‐fluoro‐β‐D ‐ribofuranosyl)adenines 5 (X=N₃) and 7 (X=NH₂), as well as of their respective α‐anomers 6 and 8 , are described, using methyl 2‐azido‐5‐O‐benzoyl‐2,3‐dideoxy‐2‐fluoro‐β‐D ‐ribofuranoside ( 4 ) as glycosylating agent. Methyl 5‐O‐benzoyl‐2,3‐dideoxy‐2,3‐difluoro‐β‐D ‐ribofuranoside ( 12 ) was prepared starting from two precursors, and coupled with silylated N⁶‐benzoyladenine to afford, after deprotection, 2′,3′‐dideoxy‐2′,3′‐difluoroadenosine ( 13 ). Condensation of 1‐O‐acetyl‐3,5‐di‐O‐benzoyl‐2‐deoxy‐2‐fluoro‐β‐D ‐ribofuranose ( 14 ) with silylated N²‐palmitoylguanine gave, after chromatographic separation and deacylation, the N⁷‐β‐anomer 17 as the main product, along with 2′‐deoxy‐2′‐fluoroguanosine ( 15 ) and its N⁹‐α‐anomer 16 in a ratio of ca. 42 : 24 : 10. An in‐depth conformational analysis of a number of 2,3‐dideoxy‐2‐fluoro‐3‐X‐D ‐ribofuranosides (X=F, N₃, NH₂, H) as well as of purine and pyrimidine 2‐deoxy‐2‐fluoro‐D ‐ribofuranosyl nucleosides was performed using the PSEUROT (version 6.3) software in combination with NMR studies.     

Synthese und Struktur hochfunktionalisierter 2, 3‐Dihydro‐1H‐1, 3, 2‐diazaborole

Synthesis and Structure of Highly Functionalized 2, 3‐Dihydro‐1H‐1, 3, 2‐diazaboroles A series of differently substituted 2, 3‐dihydro‐1H‐1, 3, 2‐diazaboroles has been prepared by various methods. 1, 3‐Di‐tert‐butyl‐2‐trimethylsilylmethyl‐1H‐1, 3, 2‐diazaborole ( 7 ), 2‐isobutyl‐1, 3‐bis(1‐cyclohexylethyl)‐1H‐1, 3, 2‐diazaborole ( 8 ), 1, 3‐bis‐(1‐cyclohexylethyl)‐2‐trimethylsilylmethyl‐1H‐1, 3, 2‐diazaborole ( 9 ) 1, 3‐bis(1‐methyl‐1‐phenyl‐propyl)‐2‐trimethylsilylmethyl‐1H‐1, 3, 2diazaborole ( 10 ) and 2‐bromo‐1, 3‐bis(1‐methyl‐1‐phenyl‐propyl)‐1H‐1, 3, 2‐diazaborole ( 11 ) were formed by reaction of the corresponding 1, 4‐diazabutadienes with the boranes Me₃SiCH₂BBr₂, iBuBBr₂ and BBr₃ followed by reduction of the resulting borolium salts [R¹ = tBu, Me(cHex)CH, [Me(Et)Ph]C; R² = Me₃SiCH₂, iBu, Br] with sodium amalgam. Treatment of 11 and 12 with silver cyanide afforded the 2‐cyano‐1, 3, 2‐diazaboroles 13 and 14 . An alternative route to compound 8 is based on the alkylation of 2‐bromo‐1, 3, 2‐diazaborole 12 with isobutyllithium. Equimolar amounts of 13 and isobutyllithium give rise to the formation of 15 . The new compounds were characterized by ¹H‐, ¹³C‐, ¹¹B‐NMR, IR and mass spectra. The molecular structures of 7 and meso ‐10 were confirmed by x‐ray structural analysis.     

Stereochemistry of the Methyl Group in (R)‐3‐Methylitaconate Derived by Rearrangement of 2‐Methylideneglutarate Catalysed by a Coenzyme B12‐Dependent Mutase

2‐Methylideneglutarate mutase is an adenosylcobalamin (coenzyme B₁₂)‐dependent enzyme that catalyses the equilibration of 2‐methylideneglutarate with (R)‐3‐methylitaconate. This reaction is believed to occur via protein‐bound free radicals derived from substrate and product. The stereochemistry of the formation of the methyl group of 3‐methylitaconate has been probed using a `chiral methyl group'. The methyl group in 3‐([²H₁,³H]methyl)itaconate derived from either (R)‐ or (S)‐2‐methylidene[3‐²H₁,3‐³H₁]glutarate was a 50 : 50 mixture of (R)‐ and (S)‐forms. It is concluded that the barrier to rotation about the C−C bond between the methylene radical centre and adjacent C‐atom in the product‐related radical [^.CH₂CH(⁻O₂CC=CH₂)CO₂⁻] is relatively low, and that the interaction of the radical with cob(II)alamin is minimal. Hence, cob(II)alamin is a spectator of the molecular rearrangement of the substrate radical to product radical.     

A new two‐dimensional CoII coordination polymer based on bis[4‐(2‐methyl‐1H‐imidazol‐1‐yl)phenyl] ether and biphenyl‐4,4′‐diyldicarboxylic acid: synthesis,crystal structure and photocatalytic degradation activity

A novel two‐dimensional Co^II coordination framework, namely poly[(μ₂‐biphenyl‐4,4′‐diyldicarboxylato‐κ²O⁴:O^4′){μ₂‐bis[4‐(2‐methyl‐1H‐imidazol‐1‐yl)phenyl] ether‐κ²N³:N^3′}cobalt(II)], [Co(C₁₄H₈O₄)(C₂₀H₁₈N₄O)]_n, has been prepared and characterized by IR, elemental analysis, thermal analysis and single‐crystal X‐ray diffraction. The crystal structure reveals that the compound has an achiral two‐dimensional layered structure based on opposite‐handed helical chains. In addition, it exhibits significant photocatalytic degradation activity for the degradation of methylene blue.     

Conformations of the Nine‐Membered Ring in the B‐Nor‐5,10‐secosteroids. X‐Ray and NMR Analysis

The conformations of (Z)‐ and (E)‐5‐oxo‐B‐nor‐5,10‐secocholest‐1(10)‐en‐3β‐yl acetates ( 2 and 3 , resp.) were examined by a combination of X‐ray crystallographic analysis and NMR spectroscopy, with emphasis on the geometry of the cyclononenone moiety. The ¹H‐ and ¹³C‐NMR spectra showed that the unsaturated nine‐membered ring of (E)‐isomer 3 in C₆D₆ and (D₆)acetone solution exists in a sole conformation of type B ₁ , which is similar to its solid‐state conformation. The (Z)‐isomer 2 in C₆D₆, CDCl₃, and (D₆)acetone solution, however, exists in two conformational forms of different families, with different orientation of the carbonyl group, the predominant form (85%) corresponding to the conformation of type A ₁ and the minor (15%) to the conformation A ₂ present also in the crystalline state. In this solid‐state conformations of the nine‐membered ring of both compounds, the 19‐Me and 5‐oxo groups are ‘β’‐oriented. The NMR analysis suggests that the nine‐membered ring of 4 has a conformation of type C ₁ in CDCl₃ solution.     

Acetyl Methyl Torsion in N‐Ethylacetamide: A Challenge for Microwave Spectroscopy and Quantum Chemistry

The gas‐phase structures and parameters describing acetyl methyl torsion of N‐ethylacetamide are determined with high accuracy, using a combination of molecular beam Fourier‐transform microwave spectroscopy and quantum chemical calculations. Conformational studies at the MP2 level of theory yield four minima on the energy surface. The most energetically favorable conformer, which possesses C₁ symmetry, is assigned. Due to the torsional barrier of 73.4782(1) cm^?1 of the acetyl methyl group, fine splitting up to 4.9 GHz is found in the spectrum. The conformational structure is not only confirmed by the rotational constants, but also by the orientation of the internal rotor. The ¹⁴N quadrupole hyperfine splittings are analyzed and the deduced coupling constants are compared with the calculated values.