Chemical Programming of the Domain of Existence of Liquid Crystals

This work illustrates how enthalpy and entropy changes responsible for successive phase transitions of cyanobiphenyl‐based liquid crystals can be combined to give cohesive free energy densities. These new parameters are able to rationalize and quantify the demixing of the melting and clearing processes that occur in thermotropic liquid crystals. Minor structural variations at the molecular level can be understood as pressure increments that alter either the melting or clearing temperatures in a predictable way. This assessment of microsegregation operating in amphiphilic molecules paves the way for the chemical programming of the domain of existence of liquid‐crystalline phases.     

Role of Edge Geometry and Magnetic Interaction in Opening Bandgap of Low‐Dimensional Graphene

By using a size‐dependent cohesive energy formula for two‐dimensional coordination materials, the bandgap openings of ideal graphene quantum dots (GQDs) and nanoribbons (GNRs) have been investigated systematically regarding dimension, edge geometry, and magnetic interaction. Results demonstrate that the bandgap openings in GQDs can be dominated by the change of atomic cohesive energy. Relative to zigzag GQDs, the openings in the armchair ones are more substantial, attributed to its edge instability. The change of cohesive energy can also lead to bandgap openings in zigzag and armchair GNRs. The contribution from the interedge magnetic interaction in zigzag GNRs is negligible, while the cohesive‐energy induced openings in armchair GNRs can oscillate according to the so‐called full‐wavelength effect, depending on the width. The model prediction provides physicochemical insight into the bandgap openings in graphene.     

Analysis of multiple melting behavior of spherulites comprising ring‐band shell/ringless core in polymorphic poly(butylene adipate)

In‐depth interpretation of ring‐banded spherulitic morphology, crystals, polymorphism, and complex melting behavior in poly(1,4‐butylene adipate) (PBA) were analyzed via a procedure of designing composite core‐shell spherulites, in which two lamellar patterns (ring‐band vs. ringless) were packed by subjecting to crystallization at two‐step temperature schemes with specific temperatures and times. By heating to 52 °C and holding at that temperature for 30 min annealing, the core can be stripped off by melting, and analysis specifically on the ring‐shell portion (with the ringless core stripped by controlled melting) proves that the highest melting peak (P₄ at 55–57 °C) is likely associated with melting of the ring‐band lamellae. Furthermore, the unusually complex multiple melting in PBA can be attributed to all three widely proposed mechanisms: (1) multiple types of lamellae preexisting in crystallized PBA, (2) scan/heating induced remelting/reorganization, and (3) polymorphism of dual crystal cells. In addition, this study evidently shows that the extinction rings within the ring‐banded shell, regardless of alternate edge‐on and flat‐on mechanism or alternative origins, can be of all singly α‐crystal form, either initially or upon postheating temperature‐induced transformation. Thus, the type of crystal forms (α or β) in polymorphic PBA is mainly associated with temperature of crystallization (T_c = 28 or 35 °C), and not likely with lamellar orientation (flat‐on or edge‐on). © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 892–899, 2008     

Probing multiple melting behaviors in poly(ethylene naphthalene 2,6‐dicarboxylate) with different thermal histories by simultaneous wide‐angle and small‐angle X‐ray scattering

A simultaneous wide‐angle and small‐angle X‐ray scattering study of two poly(ethylene naphthalene 2,6‐dicarboxylate) samples crystallized from the glassy state at different annealing temperatures for different annealing times was carried out with synchrotron radiation. Either single or dual melting was induced in the samples, as confirmed by differential scanning calorimetry (DSC). The correlation function and interface distribution function were calculated to evaluate microstructural parameters such as the long spacing, the thickness of the amorphous and crystalline phases, and the width of the size distributions. The sample with dual melting behavior exhibited an abrupt increase of all microstructural parameters at temperatures above the melting of the lowest endotherm, whereas the sample revealing a single melting endotherm did not show such a sudden change. This finding agrees with the concept that the appearance of two melting peaks in DSC traces can be explained by the dual lamellar stacking model. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 881–894, 2001     

Hydrogen‐bond patterns in the congruent complex 4‐nitrophenol–acetamide (1/1)

Fusion of 4‐nitrophenol and acetamide in a 1:1 molar ratio gives the title product, C₆H₅NO₃·C₂H₅NO, (III), which has the character of a pure covalently bonded compound, having a high sharp melting point. Complex (III) (m.p. 371.9–372.9 K) can be recrystallized from various solvents and forms eutectics with either acetamide or 4‐nitrophenol. Similar fusion of mixtures of acetamide and 2‐nitrophenol yields no complex similar to (III) and mixtures of acetamide and 3‐nitrophenol produce only a weak low‐melting complex. The significance of this study lies in its demonstration, via graph set analysis, that some of the patterns found individually in crystalline acetamide or 4‐nitrophenol have been preserved in crystals of complex (III), while several higher order graph sets are produced in (III) due to new hydrogen bonds involving the nitro group. In particular, large hydrogen‐bonded rings are formed together with helical chains.     

Initial lamellar thickness dependency of recrystallization behavior of poly(4‐methyl‐1‐pentene)

The isothermal crystallization and subsequent melting process in semicrystalline poly(4‐methyl‐1‐pentene) were investigated via temperature‐dependent small‐ and wide‐angle X‐ray scattering and Flash DSC techniques. In a phase diagram of inversed crystalline lamellar thickness and temperature, the crystallization and melting lines can be described by two linear dependencies of different slopes and different limiting temperatures at infinite lamellar thickness. Upon subsequent heating, recrystallization lines with different slopes were observed for samples with different lamellar thickness, indicating changes in surface free energy difference between stabilized crystallites and mesomorphic phase. The surface free energy of native crystallites with extended‐chain conformation decreased with increasing lamellar thickness due to a more ordered surface region and less chain ends which changes cooperatively with mesomorphic phase. The surface free energy of stabilized crystallites remained unchanged for all lamellar thickness. Therefore, the recrystallization lines with different slopes are consequences of changes in surface free energy of mesomorphic phase. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 219–224     

Structure and properties of segmented poly(urethaneurea)s with relatively short hard‐segment chains

We report the structure and properties of segmented poly(urethaneurea) (SPUU) with relatively short hard‐segment chains. The SPUU samples comprised poly(tetramethylene glycol) prepolymer as a soft segment and 4,4′‐diphenylmethane diisocyanate (MDI) units as a hard segment that were extended with ethylenediamine. To discuss quantitatively the conformation of the soft‐segment chain in the microphase‐separated domain space, we used SPUU samples for which the molecular weights of the hard‐ and soft‐segment chains are well characterized. The effects of the cohesive force in the hard‐segment chains on the structure and properties of SPUU were also studied with samples of different chain lengths of the hard segment, although the window of x_H, the average number of MDI units in a hard‐segment chain, was narrow (2.38 ≤ x_H ≤ 2.77). There were urethane groups in the soft segments and urea groups in the hard segments. Because of a strong cohesive force between the urea groups, we could control the overall cohesive force in the hard‐segment chains by controlling the chain lengths of the hard segment. First of all, microphase separation was found to be better developed in the samples with longer hard‐segment chains because of an increase of the cohesive force. It was also found that the interfacial thickness became thinner. The long spacing for the one‐dimensionally repeating hard‐ and soft‐segment domains could be well correlated with the molecular characteristics when the assumption of Gaussian conformation was employed for the soft‐segment chains. This is unusual for strongly segregated block copolymers and might be characteristic of multiblock copolymers containing rod–coil chains. The tensile moduli and thermal stability temperature, T_H, increased with an increase of the cohesive force, whereas the glass‐transition temperature, the melting temperature, and the degree of crystallinity of the soft‐segment chains decreased. The increase in T_H especially was appreciable, although the variation in the chain length of the hard segment was not profound. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1716–1728, 2000     

New insights into the multiple melting behaviors of the semicrystalline ethylene‐hexene copolymer: Origins of quintuple melting peaks

A semicrystalline ethylene‐hexene copolymer (PEH) was subjected to a simple thermal treatment procedure as follows: the sample was isothermally crystallized at a certain isothermal crystallization temperature from melt, and then was quenched in liquid nitrogen. Quintuple melting peaks could be observed in heating scan of the sample by using differential scanning calorimeter (DSC). Particularly, an intriguing endothermic peak (termed as Peak 0) was found to locate at about 45 °C. The multiple melting behaviors for this semicrystalline ethylene‐hexene copolymer were investigated in details by using DSC. Wide‐angle X‐ray diffraction (WAXD) technique was applied to examine the crystal forms to provide complementary information for interpreting the multiple melting behaviors. Convincing results indicated that Peak 0 was due to the melting of crystals formed at room temperature from the much highly branched ethylene sequences. Direct heating scans from isothermal crystallization temperature (T_c, 104–118 °C) were examined for comparison, which indicated that the multiple melting behaviors depended on isothermal crystallization temperature and time. A triple melting behavior could be observed after a relatively short isothermal crystallization time at a low T_c (104–112 °C), which could be attributed to a combination of melting of two coexistent lamellar stack populations with different lamellar thicknesses and the melting‐recrystallization‐remelting (mrr) event. A dual melting behavior could be observed for isothermal crystallization with both a long enough time at a low T_c and a short or long time at an intermediate T_c (114 °C), which was ascribed to two different crystal populations. At a high T_c (116–118 °C), crystallizable ethylene sequences were so few that only one single broad melting peak could be observed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2100–2115, 2008     

Thermal and X‐ray analysis of polymorphic crystals,melting, and crystalline transformation in poly(butylene adipate)

Polymorphic crystals and complex multiple melting behavior in an aliphatic biodegradable polyester, poly(butylene adipate) (PBA), were thoroughly examined by wide‐angle X‐ray diffraction (WAXD) and differential scanning calorimetry (DSC). Further clarification on mechanisms of multiple melting peaks related to polymorphic crystal forms in PBA was attempted. More stable α‐form crystal is normally favored for crystallization from melt at higher temperatures (31–35 °C), or upon slow cooling from the melt; while the β‐form is the favored species for crystallization at low temperatures (25–28 °C). We further proved that PBA crystallization could also result in all α‐form even at low temperatures (25–28 °C) if it crystallized with the presence of prior α‐form nuclei. PBA packed with both crystal forms could display as many as four melting peaks (P1 ? P4, in ascending temperature order). However, PBA initially containing only the α‐crystal exhibited dual melting peaks of P1 and P3, which are attributed to dual lamellar distributions of the α‐crystal. By contrast, PBA initially containing only the β‐crystal could also exhibit dual melting peaks (P2 and P4) upon scanning. While P2 is clearly associated with melting of the initial β‐crystal, the fourth melting peak (P4), appearing rather broad, was determined to be associated with superimposed thermal events of crystal transformation from β‐ to α‐crystal and final re‐melting of the new re‐organized α‐crystal. Crystal transformation from one to the other or vice versa, lamellae thickening, annealing at molten state, and influence on crystal polymorphism in PBA were analyzed. Relationships and mechanisms of dual peaks for isolate α‐ or β‐crystals in PBA are discussed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1662–1672, 2005     

The double melting behavior of a liquid crystalline polyimide derived from PMDA and 1,3‐bis[4‐(4′‐aminophenoxyl) cumyl] benzene

The double melting behavior of a thermotropic liquid crystalline polyimide was studied by means of differential scanning calorimetry (DSC), polarized light microscopy (PLM), transmission electron microscopy (TEM), wide‐angle X‐ray diffraction (WAXD), and small‐angle X‐ray scattering (SAXS). This liquid crystalline polyimide exhibited a normal melting peak around 278 °C and transformed into a smectic A phase. The smectic A phase changed to nematic phase upon heating to 298 °C, then became isotropic melt around 345 °C. The samples annealed or isothermally crystallized at lower temperature showed double melting endotherms during heating scan. The annealing‐induced melting endotherm was highly dependent on annealing conditions, whereas the normal melting endotherm was almost not influenced by annealing when the annealing temperature was low. Various possibilities for the lower melting endotherm are discussed. The equilibrium melting points of both melting peaks were extrapolated to be 283.2 °C. Combined analytical results showed that the double melting peaks were from the melting of the two types of crystallites generated from two crystallization processes: a slow and a fast one. Fast crystallization may start from the well‐aligned liquid crystal domains, whereas the slow one may be from the fringed or amorphous regions. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3018–3031, 2000     

Lanthanoid‐Based Ionic Liquids Incorporating the Dicyanonitrosomethanide Anion

A series of low‐melting‐point salts with hexakisdicyanonitrosomethanidolanthanoidate anions has been synthesised and characterised: (C₂mim)₃[Ln(dcnm)₆] ( 1 Ln ; 1 Ln = 1 La , 1 Ce , 1 Pr , 1 Nd ), (C₂C₁mim)₃[Pr(dcnm)₆] ( 2 Pr ), (C₄C₁pyr)₃[Ce(dcnm)₆] ( 3 Ce ), (N₁₁₁₄)₃[Ln(dcnm)₆] ( 4 Ln ; 4 Ln = 4 La , 4 Ce , 4 Pr , 4 Nd , 4 Sm , 4 Gd ), and (N_1112OH)₃[Ce(dcnm)₆] ( 5 Ce ) (C₂mim=1‐ethyl‐3‐methylimidazolium, C₂C₁mim=1‐ethyl‐2,3‐dimethylimidazolium, C₄C₁py=N‐butyl‐4‐methylpyridinium, N₁₁₁₄=butyltrimethylammonium, N_1112OH=2‐(hydroxyethyl)trimethylammonium=choline). X‐ray crystallography was used to determine the structures of complexes 1 La , 2 Pr , and 5 Ce , all of which contain [Ln(dcnm)₆]^3? ions. Complexes 1 Ln and 2 Pr were all ionic liquids (ILs), with complex 3 Ce melting at 38.1 °C, the lowest melting point of any known complex containing the [Ln(dcnm)₆]^3? trianion. The ammonium‐based cations proved to be less suitable for forming ILs, with complexes 4 Sm and 4 Gd being the only salts with the N₁₁₁₄ cation to have melting points below 100 °C. The choline‐containing complex 5 Ce did not melt up to 160 °C, with the increase in melting point possibly being due to extensive hydrogen bonding, which could be inferred from the crystal structure of the complex.     

Pressure‐induced amorphization and disordering on cooling in semi‐crystalline polymers: calorimetric evidence for inverse melting in one component system

We report some unusual phase behaviour, of general implication for condensed matter, on the polymer poly‐4‐methyl pentene‐1 (P4MP1) induced by changes in pressure (P) and temperature (T), as observed by in‐situ X‐ray diffraction and high pressure DSC. Upon increasing pressure beyond a threshold value, the polymer, crystalline at ambient conditions, looses its crystalline order isothermally. The process is reversible. This behaviour is observed in two widely separated temperature regions, one below the glass transition temperature (< 50°C) and one close to the melting temperature (250°C), thus showing solid state amorphization and inversion in the melting temperature with increasing pressure. This further suggests inverse melting, i.e. re‐entrant of the two widely separated liquid and amorphous phases along the T‐axis at fixed P. This is confirmed experimentally as disordering in the crystalline structure on cooling. The inverse melting in P4MP1 raises the possibility of exothermic melting and endothermic crystallization as anticipated by Tammann (1903), see reference 1. The anticipated exothermic melting and endothermic crystallization is confirmed experimentally in the one component system P4MP1. We are observing similar features in a range of polymers.     

Isothermal crystallization kinetics and spherulitic morphology of poly(4‐hydroxybutyric acid‐alt‐glycolic acid)

Isothermal crystallization behavior of a new regular polyester constituted by glycolic acid and 4‐hydroxybutyric acid units is studied by means of differential scanning calorimetry and hot‐stage optical microscopy. A wide range of crystallization conditions were experimentally accessible, allowing various morphological features to be observed and accurate estimates made of characteristic growth parameters, including radial growth and nucleation rates. Three‐dimensional spherulitic growth from heterogeneous nuclei is deduced from the Avrami analysis, whereas optical micrographs reveal two different spherulitic textures that agree with the existence of two crystallization regimes. These can be well distinguished from the breaks observed in the Lauritzen and Hoffman plots when the linear crystal growth rate or the overall crystallization rate is considered. Ringed and nonringed spherulites with negative and positive birefringence, respectively, can be obtained depending on crystallization conditions and regimes. The studied polyester shows rather complex melting behavior which is interpreted in terms of a recrystallization process involving the two different kinds of spherulites. This study allows polymorphism to be discounted. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2640–2653, 2007     

Low‐Transition‐Temperature Mixtures (LTTMs): A New Generation of Designer Solvents

A new generation of designer solvents emerged in the last decade as promising green media for multiple applications, including separation processes: the low‐transition‐temperature mixtures (LTTMs). They can be prepared by mixing natural high‐melting‐point starting materials, which form a liquid by hydrogen‐bond interactions. Among them, deep‐eutectic solvents (DESs) were presented as promising alternatives to conventional ionic liquids (ILs). Some limitations of ILs are overcome by LTTMs, which are cheap and easy to prepare from natural and readily available starting materials, biodegradable, and renewable.     

Intercalating Nucleic Acids with Pyrene Nucleotide Analogues as Next‐Nearest Neighbors for Excimer Fluorescence Detection of Single‐Point Mutations under Nonstringent Hybridization Conditions

Fluorescence and hybridization specificity is reported for intercalating nucleic acids (INAs), which are here oligodeoxynucleotides (ODNs) synthesized with insertions using (S)‐1‐[bis(4‐methoxyphenyl)(phenyl)methoxy]‐3‐[(pyren‐1‐yl)methoxy]propan‐2‐ol phosphoramidites. It is shown that an INA with two insertions placed as next‐nearest neighbors can be used for discrimination between nucleic acids and their single‐point mutants. Quenching of an excimer band at 480 nm is observed upon hybridizing to a complementary sequence, whereas the excimer band is present when the nucleobase pair between the two pyrene moieties is mismatched. It is the first example of a solution based on fluorescence detection of single‐point mutants that uses excimer formation and does not rely on stringent hybridization conditions. Furthermore, it is shown that INAs with pyrene insertions retain their sequence specificity in thermal melting.     

X‐ray studies on the double melting behavior of poly(butylene terephthalate)

The double melting behavior of poly(butylene terephthalate) (PBT) was studied with differential scanning calorimetry (DSC) and wide‐angle X‐ray analysis. DSC melting curves of melt‐crystallized PBT samples, which we prepared by cooling from the melt (250 °C) at various cooling rates, showed two endothermic peaks and an exothermic peak located between these melting peaks. The cooling rate effect on these peaks was investigated. The melt‐crystallized PBT sample cooled at 24 K min^?1 was heated at a rate of 1 K min^?1, and its diffraction patterns were obtained successively at a rate of one pattern per minute with an X‐ray measurement system equipped with a position‐sensitive proportional counter. The diffraction pattern did not change in the melting process, except for the change in its peak height. This suggests that the double melting behavior does not originate from a change in the crystal structure. The temperature dependence of the diffraction intensity was obtained from the diffraction patterns. With increasing temperature, the intensity decreased gradually in the low‐temperature region and then increased distinctly before a steep decrease due to the final melting. In other words, the temperature‐dependence curve of the diffraction intensity showed a peak that is interpreted as proof of the recrystallization in the melting process. The peak temperature was 216 °C. The temperature‐dependence curve of the enthalpy change obtained by the integration of the DSC curve almost coincided with that of the diffraction intensity. The double melting behavior in the heating process of PBT is concluded to originate from the increase of crystallinity, that is, recrystallization. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2005–2015, 2001     

Phase separation and polymer crystallization in a poly(4‐methyl‐1‐pentene)–dioctylsebacate–dimethylphthalate system via thermally induced phase separation

The effects of the polymer concentration and quenching temperature on the phase separation, the membrane morphology and polymer crystallization behavior in a poly(4‐methyl‐1‐pentene) (TPX)‐dioctylsebacate (DOS)‐dimethylphthalate (DMP) system via thermally induced phase separation were studied with a pseudobinary phase diagram, with the weight ratio of DOS:DMP = 1:1. SEM was used to observe the membrane morphology and structure, whereas the TPX crystallization behavior was studied with DSC and WAXD. Liquid‐liquid phase separation occurred, although quenching under the crystallization temperature. As the quenching temperature decreased, the pore size decreased, with better connected pore structure formed. The membranes quenched at 333 and 363 K showed good cellular structures, with an average pore size of about 2.3μm, whereas the pores of the membranes quenched at 393 and 423 K were not well formed, with some lamellar crystals on the inner side. The diluent assisted the mobility of the polymer chain, which improved the polymer crystallization. Dual‐melting‐peak behavior occurred for all the samples studied here. As the quenching temperature increased, the first peak of the melting trace moved to a higher temperature, whereas the second one stayed almost the same. The flexibility of the TPX main chain was restricted by the side groups, which allowed liquid‐liquid phase separation to occur first when quenched below the equilibrium crystallization temperature. This allowed primary and secondary crystallization, which was responsible for the dual‐melting‐peak behavior. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 153–161, 2007     

Melting behavior of a poly(ether‐block‐amide) copolymer melt‐crystallized under quiescent,isothermal conditions

Segmented poly(ether‐block‐amide) copolymers are typically known as polyamide‐based thermoplastic elastomers consisting of hard, crystallizable polyamide block and flexible, amorphous polyether block. The melting characteristics of a poly(ether‐block‐amide) copolymer melt‐crystallized under various quiescent, isothermal conditions were calorimetrically investigated using differential scanning calorimetry (DSC). For such crystallized copolymer samples, their crystalline structures under ambient condition and the structural evolutions upon heating from ambient to complete melting were characterized using ambient and variable‐temperature wide‐angle X‐ray diffractometry (WAXD), respectively. It was observed that dependent of specific crystallization conditions, the copolymer samples exhibited one, two, or three melting endotherms. The ambient WAXD results indicated that all melt‐crystallized copolymer samples only exhibited γ‐form crystals associated with the hexagonal habits of the polyamide homopolymer, whereas variable‐temperature WAXD data suggested that upon heating from ambient, a melt‐crystallized copolymer might exhibit so‐called Brill transition before complete melting. Based on various DSC and variable‐temperature WAXD experimental results obtained in this study, the applicability of different melting mechanisms that might be responsible for multiple melting characteristics of various crystallized PEBA copolymer samples were discussed. It was postulated that the low (T _m1) endotherm was primarily because of the disruption of less thermally stable, short‐range ordered structure of amorphous polyamide segments of the copolymer, which was only formed after the completion of primary crystallization via so‐called annealing effects. The intermediate (T_m2) and high (T_m3) endotherms were attributed to the melting of primary crystals within polyamide crystalline microdomains of the copolymer. The appearance of these two melting endotherms might be somehow complicated by thermally induced Brill transition. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2035–2046, 2008     

Synthesis and polymerization of new self‐polymerizable quinoxaline monomers

Extended self‐polymerizable poly(phenylquinoxaline) monomer mixtures {i.e.,2‐[4‐(4‐hydroxyphenoxy)phenyl]‐3‐phenyl‐6‐chloroquinoxaline and 3‐[4‐(4‐hydroxy phenoxy)phenyl]‐2‐phenyl‐6‐chloroquinoxaline, 2‐[4‐(4‐hydroxyphenoxy)phenyl]‐3‐phenyl‐6‐fluoroquinoxaline and 3‐[4‐(4‐hydroxyphenoxy)phenyl]‐2‐phenyl‐6‐fluoroquinoxaline, and 2‐(4‐fluorophenyl)‐3‐phenyl‐6‐(4‐hydroxyphenoxy)quinoxaline and 3‐(4‐fluorophenyl)‐2‐phenyl‐6‐(4‐hydroxyphenoxy)quinoxaline} more flexible and nucleophilic than a previously reported monomer mixture [i.e., 3‐(4‐hydroxyphenyl)‐2‐phenyl‐6‐fluoroquinoxaline and 2‐(4‐hydroxyphenyl)‐3‐phenyl‐6‐fluoroquinoxaline] were synthesized. The monomer mixtures were then polymerized into high‐molecular‐weight polymers. A sample was obtained, through a chlorine displacement reaction, that was a semicrystalline polymer with an intrinsic viscosity of 1.11 dL/g in m‐cresol at 30 ± 0.1 °C and two melting temperatures at 339 and 377 °C in the first differential scanning calorimetry scan. There was a melting temperature at 328 °C without a detectable glass‐transition temperature (T_g) when the sample was subjected to a second differential scanning calorimetry scan. The samples from fluorine displacement reactions were completely amorphous polymers. They had intrinsic viscosities of 0.53–0.90 dL/g in m‐cresol at 30 ± 0.1 °C and T_g's of 220–224 °C. The polymer samples from fluorine displacement reactions were evaluated with gel permeation chromatography and matrix‐assisted laser desorption/ionization time‐of‐flight analyses, which monitored the existence of certain amounts of cyclic oligomers. The thin films of the polymers had room‐temperature tensile strengths of 97–113 MPa, room‐temperature Young's moduli of 2.30–2.35 GPa, and room‐temperature elongations at break of 40–150%. The melt viscosity decreased from 10⁷ to less than 10⁴ Pa s at 310 °C as the frequency was increased from 10^?2 to 10² rad/s. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 78–91, 2005