Well‐defined poly(oxazoline)‐b‐poly(acrylate) amphiphilic copolymers: From synthesis by polymer–polymer coupling to self‐organization in water

In this contribution, we report on the self‐assembly in water of original amphiphilic poly(2‐methyl‐2‐oxazoline)‐b‐poly(tert‐butyl acrylate) copolymers, synthesized by copper‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction. For such purpose, (poly(2‐methyl‐2‐oxazoline)) and (poly(tert‐butyl acrylate)) are first prepared by cationic ring‐opening polymerization and atom transfer radical polymerization, respectively. Well‐defined polymeric building blocks, ω‐N₃‐P(t‐BA) and α‐alkyne‐P(MOx), bearing reactive chain end groups, are accurately characterized by matrix‐assisted laser desorption ionization time‐of‐flight spectroscopy. Then, P(MOx)_n‐b‐P(t‐BA)_m are achieved by polymer–polymer coupling and are fully characterized by diffusion‐ordered NMR spectroscopy and size exclusion chromatography, demonstrating the obtaining of pure amphiphilic copolymers. Consequently, the latter lead to the formation in water of well‐defined monodisperse spherical micelles (R_H = 40–60 nm), which are studied by fluorescence spectroscopy, static light scattering, atomic force microscope, and transmission electronic microscopy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and Thermoreversible Gelation Properties of Main‐Chain Poly(pyridine‐2,6‐dicarboxamide‐triazole)s

A series of main‐chain poly(amide‐triazole)s were prepared by copper(I)‐catalyzed alkyne–azide AABB‐type copolymerizatons between five structurally similar diacetylenes 1 – 5 with the same diazide 6 . The acetylene units in monomers 1 – 5 possessed different degrees of conformational flexibility due to the different number of intramolecular hydrogen bonds built inside the monomer architecture. Our study showed that the conformational freedom of the monomer had a profound effect on the polymerization efficiency and the thermoreversible gelation properties of the resulting copolymers. Among all five diacetylene monomers, only the one, that is, 1 ‐Py(NH)₂ which possesses the pyridine‐2,6‐dicarboxamide unit with two built‐in intramolecular H bonds could produce the corresponding poly(amide‐triazole) Poly‐(PyNH)₂ with a significantly higher degree of polymerization (DP) than other monomers with a lesser number of intramolecular H bonds. In addition, it was found that only this polymer exhibited excellent thermoreversible gelation ability in aromatic solvents. A self‐assembling model of the organogelating polymer Poly‐(PyNH)₂ was proposed based on FTIR spectroscopy, XRD, and SEM analyses, in which H bonding, π–π aromatic stacking, hydrophobic interactions, and the structural rigidity of the polymer backbone were identified as the main driving forces for the polymer self‐assembly process.     

Microenvironment‐Induced In Situ Self‐Assembly of Polymer–Peptide Conjugates That Attack Solid Tumors Deeply

In cancer treatment, the unsatisfactory solid‐tumor penetration of nanomaterials limits their therapeutic efficacy. We employed an in vivo self‐assembly strategy and designed polymer–peptide conjugates (PPCs) that underwent an acid‐induced hydrophobicity increase with a narrow pH‐response range (from 7.4 to 6.5). In situ self‐assembly in the tumor microenvironment at appropriate molecular concentrations (around the IC₅₀ values of PPCs) enabled drug delivery deeper into the tumor. A cytotoxic peptide KLAK, decorated with the pH‐sensitive moiety cis‐aconitic anhydride (CAA), and a cell‐penetrating peptide TAT were conjugated onto poly(β‐thioester) backbones to produce PT‐K‐CAA, which can penetrate deeply into solid tumors owing to its small size as a single chain. During penetration in vivo, CAA responds to the weak acid, leading to the self‐assembly of PPCs and the recovery of therapeutic activity. Therefore, a deep‐penetration ability for enhanced cancer therapy is provided by this in vivo assembly strategy.     

Chain‐Growth Click Polymerization of AB2 Monomers for the Formation of Hyperbranched Polymers with Low Polydispersities in a One‐Pot Process

Hyperbranched polymers are important soft nanomaterials but robust synthetic methods with which the polymer structures can be easily controlled have rarely been reported. For the first time, we present a one‐pot one‐batch synthesis of polytriazole‐based hyperbranched polymers with both low polydispersity and a high degree of branching (DB) using a copper‐catalyzed azide–alkyne cycloaddition (CuAAC) polymerization. The use of a trifunctional AB₂ monomer that contains one alkyne and two azide groups ensures that all Cu catalysts are bound to polytriazole polymers at low monomer conversion. Subsequent CuAAC polymerization displayed the features of a “living” chain‐growth mechanism with a linear increase in molecular weight with conversion and clean chain extension for repeated monomer additions. Furthermore, the triazole group in a linear (L) monomer unit complexed Cu^I, which catalyzed a faster reaction of the second azide group to quickly convert the L unit into a dendritic unit, producing hyperbranched polymers with DB=0.83.     

Synthesis of well‐defined AB20‐type star polymers with cyclodextrin‐core by combination of NMP and ATRP

The synthesis of an AB₂₀‐type heteroarm star polymer consisting of a polystyrene arm and 20‐arms of poly(methyl methacrylate) or poly(tert‐butyl acrylate) was carried out using the combination of nitroxide‐mediated polymerization (NMP) and atom transfer radical polymerization (ATRP). The NMP of styrene was carried out using mono‐6‐[4‐(1′‐(2″,2″,6″,6″‐tetramethyl‐1″‐piperidinyloxy)‐ethyl)benzamido]‐β‐cyclodextrin peracetate ( 1 ) to afford end‐functionalized polystyrene with an acetylated β‐cyclodextrin (β‐CyD) unit (prepolymer 2 ) with a number‐average molecular weight (M_n) of 11700 and a polydispersity (M_w/M_n) of 1.17. After deacetylation of prepolymer 2 , the resulting polymer was reacted with 2‐bromoisobutyric anhydride to give end‐functionalized polystyrene with 20(2‐bromoisobutyrol)s β‐CyD, macroinitiator 4 . The copper (I)‐mediated ATRP of methyl methacrylate (MMA) and tert‐butyl acrylate (tBA) was carried out using macroinitiator 4 . The resulting polymers were isolated by SEC fractionation to produce AB₂₀‐type star polymers with a β‐CyD‐core, 5 . The well‐defined structure of 5 with weight‐average molecular weight (M_w)s of 13,500–65,300 and M_w/M_n's of 1.26–1.28 was demonstrated by SEC and light scattering measurements. The arm polymers were separated from 5 by destruction with 28 wt % sodium methoxide in order to analyze the details of their characteristic structure. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4271–4279, 2005     

Self‐Healing Supramolecular Materials Constructed by Copolymerization via Molecular Recognition of Cavitand‐Based Coordination Capsules

The repeating guest units of poly‐(R)‐ 2 were selectively encapsulated by the self‐assembled capsule poly‐ 1 possessing eight polymer side chains to form the supramolecular graft polymer (poly‐ 1 )_n?poly‐(R)‐ 2 . The encapsulation of the guest units was confirmed by ¹H NMR spectroscopy and the DOSY technique. The hydrodynamic radius of the graft polymer structure was greatly increased upon the complexation of poly‐ 1 . The supramolecular graft polymer (poly‐ 1 )_n?poly‐(R)‐ 2 was stably formed in the 1:1 host–guest ratio, which increased the glass transition temperature by more than 10 °C compared to that of poly‐ 1 . AFM visualized that (poly‐ 1 )_n?poly‐(R)‐ 2 formed the networked structure on mica. The (poly‐ 1 )_n?poly‐(R)‐ 2 gelled in 1,1,2,2‐tetrachloroethane, which led to fabrication of distinct viscoelastic materials that demonstrated self‐healing behavior in a tensile test.     

Host–Guest Binding‐Site‐Tunable Self‐Assembly of Stimuli‐Responsive Supramolecular Polymers

Despite the remarkable progress made in controllable self‐assembly of stimuli‐responsive supramolecular polymers (SSPs), a basic issue that has not been consideration to date is the essential binding site. The noncovalent binding sites, which connect the building blocks and endow supramolecular polymers with their ability to respond to stimuli, are expected to strongly affect the self‐assembly of SSPs. Herein, the design and synthesis of a dual‐stimuli thermo‐ and photoresponsive Y‐shaped supramolecular polymer (SSP2) with two adjacent β‐cyclodextrin/azobenzene (β‐CD/Azo) binding sites, and another SSP (SSP1) with similar building blocks, but only one β‐CD/Azo binding site as a control, are described. Upon gradually increasing the polymer solution temperature or irradiating with UV light, SSP2 self‐assemblies with a higher binding‐site distribution density; exhibits a flower‐like morphology, smaller size, and more stable dynamic aggregation process; and greater controllability for drug‐release behavior than those observed with SSP1 self‐assemblies. The host–guest binding‐site‐tunable self‐assembly was attributed to the positive cooperativity generated among adjacent binding sites on the surfaces of SSP2 self‐assemblies. This work is beneficial for precisely controlling the structural parameters and controlled release function of SSP self‐assemblies.     

Facile synthesis of AB2‐type miktoarm star polymers through the combination of atom transfer radical polymerization and ring‐opening polymerization

A novel miktofunctional initiator ( 1 ), 2‐hydroxyethyl 3‐[(2‐bromopropanoyl)oxy]‐2‐{[(2‐bromopropanoyl)oxy]methyl}‐2‐methyl‐propanoate, possessing one initiating site for ring‐opening polymerization (ROP) and two initiating sites for atom transfer radical polymerization (ATRP), was synthesized in a three‐step reaction sequence. This initiator was first used in the ROP of ?‐caprolactone, and this led to a corresponding polymer with secondary bromide end groups. The obtained poly(?‐caprolactone) (PCL) was then used as a macroinitiator for the ATRP of tert‐butyl acrylate or methyl methacrylate, and this resulted in AB₂‐type PCL–[poly(tert‐butyl acrylate)]₂ or PCL–[poly(methyl methacrylate)]₂ miktoarm star polymers with controlled molecular weights and low polydispersities (weight‐average molecular weight/number‐average molecular weight < 1.23) via the ROP–ATRP sequence. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2313–2320, 2004     

Reduction‐cleavable hyperbranched polymers with limited intramolecular cyclization via click chemistry

In this contribution, we present new reduction‐cleavable hyperbranched disulfide bonds‐containing poly(ester triazole)s with limited intramolecular cyclization, which can be synthesized by the Cu(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) of A₂ monomer of dipropargyl 3,3′‐dithiobispropionate and B₃ monomer of tris(hydroxymethyl)ethane tri(4‐azidobutanoate). The hyperbranched poly(ester triazole)s possess numerous terminal groups and weight‐average molecular weight up to 20,400 g mol^?1 with a polydispersity index in the range 1.57–2.17. The CuAAC introduces rigid triazole units into the backbones of hyperbranched poly(ester triazole)s and reduces intramolecular cyclization, which is proved by topological analysis and ¹H NMR spectroscopy. The disulfide bonds on backbones endow the reduction‐cleavable feature to the hyperbranched poly(ester triazole)s at the presence of dithiothreitol. It gives a novel and convenient methodology for the synthesis of reduction‐responsive functional polymer with controlled topologies, and the reduction‐cleavable hyperbranched poly(ester triazole)s with limited intramolecular cyclization are expected to possess potential in the application of stimuli‐responsive anticancer drug nanocarriers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2374–2380     

Thio‐Bromo “Click” Reaction Derived Polymer–Peptide Conjugates for Their Self‐Assembled Fibrillar Nanostructures

The synthesis and self‐assembly of peptide–polymer conjugates into fibrillar nanostructures are reported, based on the amyloidogenic peptide KLVFF. A strategy for rational synthesis of polymer–peptide conjugates is documented via tethering of the amyloidogenic peptide segment LVFF (Aβ_17‐20) and its modified derivative FFFF to the hydrophilic poly(ethylene glycol) monomethyl ether (mPEG) polymer via thio‐bromo based “click” chemistry. The resultant conjugates mPEG‐LVFF‐OMe and mPEG‐FFFF‐OMe are purified via preparative gel permeation chromatography technique (with a yield of 61% and 64%, respectively), and are successfully characterized via combination of spectroscopic and chromatographic methods, including electrospray ionization time‐of‐flight mass spectrometry. The peptide‐guided self‐assembling behavior of the as‐constructed amphiphilic supramolecular materials is further investigated via transmission electron microscopic and circular dichroism spectroscopic analysis, exhibiting fibrillar nanostructure formation in binary aqueous solution mixture.     

Quadruple click reactions for the synthesis of cysteine‐terminated linear multiblock copolymers

Synthesis of cysteine‐terminated linear polystyrene (PS)‐b‐poly(ε‐caprolactone) (PCL)‐b‐poly(methyl methacrylate) (PMMA)/or poly(tert‐butyl acrylate)(PtBA)‐b‐poly(ethylene glycol) (PEG) copolymers was carried out using sequential quadruple click reactions including thiol‐ene, copper‐catalyzed azide–alkyne cycloaddition (CuAAC), Diels–Alder, and nitroxide radical coupling (NRC) reactions. N‐acetyl‐L ‐cysteine methyl ester was first clicked with α‐allyl‐ω‐azide‐terminated PS via thiol‐ene reaction to create α‐cysteine‐ω‐azide‐terminated PS. Subsequent CuAAC reaction with PCL, followed by the introduction of the PMMA/or PtBA and PEG blocks via Diels–Alder and NRC, respectively, yielded final cysteine‐terminated multiblock copolymers. By ¹H NMR spectroscopy, the DP_ns of the blocks in the final multiblock copolymers were found to be close to those of the related polymer precursors, indicating that highly efficient click reactions occurred for polymer–polymer coupling. Successful quadruple click reactions were also confirmed by gel permeation chromatography. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Encapsulation of Metalloporphyrins in a Self‐Assembled Cubic M8L6 Cage: A New Molecular Flask for Cobalt–Porphyrin‐Catalysed Radical‐Type Reactions

The synthesis of a new, cubic M₈L₆ cage is described. This new assembly was characterised by using NMR spectroscopy, DOSY, TGA, MS, and molecular modelling techniques. Interestingly, the enlarged cavity size of this new supramolecular assembly allows the selective encapsulation of tetra(4‐pyridyl)metalloporphyrins (M^II(TPyP), M=Zn, Co). The obtained encapsulated cobalt–porphyrin embedded in the cubic zinc–porphyrin assembly is the first example of a catalytically active encapsulated transition‐metal complex in a cubic M₈L₆ cage. The substrate accessibility of this system was demonstrated through radical‐trapping experiments, and its catalytic activity was demonstrated in two different radical‐type transformations. The reactivity of the encapsulated Co^II(TPyP) complex is significantly increased compared to free Co^II(TPyP) and other cobalt–porphyrin complexes. The reactions catalysed by this system are the first examples of cobalt–porphyrin‐catalysed radical‐type transformations involving diazo compounds which occur inside a supramolecular cage.     

Divergent synthesis and self‐assembly of amphiphilic polymeric dendrons with selective degradable linkages

Enhancing the structural complexity and functionality of the building blocks allows the construction of supramolecular assemblies. In this work, we demonstrate a strategy for the design and synthesis of complex macromolecular architectures. We use atom transfer radical polymerization to produce well‐defined polymers with telechelic end‐group functionality, and “click” them together to form functional 3rd generation dendrons, and incorporated degradable linkages and certain functionality at the polymer chain‐ends of each generation. The 3rd generation polymeric dendrons consisted of homopolymer polystyrene (PSTY) with either four solketals or eight alcohols, diblock PSTY and poly(t‐butyl acrylate), and amphiphilic diblock. The peripheral ends consisting of alcohols create functionalization points for further chemical modification or chemical coupling and the cleavable linkages between the 2nd and 3rd generations all provide the first steps toward smart nanostructures. Importantly, we can synthesize these dendrons in pure form. The self‐assembly of the amphiphilic dendrons (the inner and outer generations consisting of PSTY and polyacrylic acid, respectively) in water produced micelles of uniform size with an aggregation number of 43 dendrons per micelle. The size of the micelles was small (D_H =20.7 nm) and comparable to the size found by transmission electron microscopy (14–18 nm). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1533–1547, 2008     

Host–Guest Complexation of [60]Fullerenes and Porphyrins Enabled by “Click Chemistry”

Herein the synthesis, characterization, and organization of a first‐generation dendritic fulleropyrrolidine bearing two pending porphyrins are reported. Both the dendron and the fullerene derivatives were synthesized by Cu^I‐catalyzed alkyne–azide cycloaddition (CuAAC). The electron‐donor–acceptor conjugate possesses a shape that allows the formation of supramolecular complexes by encapsulation of C₆₀ within the jaws of the two porphyrins of another molecule. The interactions between the two photoactive units (i.e., C₆₀ and Zn–porphyrin) were confirmed by cyclic voltammetry as well as by steady‐state and time‐resolved spectroscopy. For example, a shift of about 85 mV was found for the first reduction of C₆₀ in the electron‐donor–acceptor conjugate compared with the parent molecules, which indicates that C₆₀ is included in the jaws of the porphyrin. The fulleropyrrolidine compound exhibits a rich polymorphism, which was corroborated by AFM and SEM. In particular, it was found to form supramolecular fibrils when deposited on substrates. The morphology of the fibrils suggests that they are formed by several rows of fullerene–porphyrin complexes.     

Formation of Discrete Ladders and a Macroporous Xerogel Film by the Zipperlike Dimerization of Meso–Meso‐Linked Zinc(II) Porphyrin Arrays with Di(pyrid‐3‐yl)acetylene

Metal porphyrins assemble to form a supramolecular architecture with a characteristic structure and characteristic properties and functions upon complexation with appropriate ligands. However, there are few applications of these assembly processes to the construction of polymeric porphyrin arrays with useful functionalities. In this study, we found that meso–meso‐linked Zn^II porphyrin arrays underwent zipperlike dimerization upon complexation with di(pyrid‐3‐yl)acetylene (DPA) in chloroform to form discrete double‐stranded porphyrin ladders. Similarly, the assembly of poly(zinc(II) porphyrinylene) with DPA gave a thermoresponsive gel, whose three‐dimensional network structure was so strong that a macroporous xerogel film was obtained.     

Energy Transfer and Concentration‐Dependent Conformational Modulation: A Porphyrin‐Containing [3]Rotaxane

A zinc porphyrin‐containing [3]rotaxane A was synthesized through a copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction. Energy donors and acceptor porphyrin were introduced to dibenzo[24]crown‐8 (DB24C8) and dibenzyl ammonium (DBA) units of [3]rotaxane A to understand the intramolecular energy transfer process. Investigations of the photophysical properties of [3]rotaxane A demonstrated that the intramolecular efficient energy transfer readily occurred from the donors on the wheels to the porphyrin center on the axis. The fluorescence of energy donors in the region of 400 to 450 nm was efficiently absorbed by the porphyrin acceptor under irradiation at 345 nm, and finally a red light emission at about 600 nm was achieved. Further investigation indicated that the conformation of [3]rotaxane A was self‐modulated by changing its concentration in CH₂Cl₂. The triazole groups on the wheel coordinated or uncoordinated to Zn²⁺ through intramolecular self‐coordination with the change in the concentration of [3]rotaxane A in CH₂Cl₂. Therefore, this conformational change was reversible in a non‐coordinating solvent such as CH₂Cl₂ but inhibited in a coordinating solvent such as THF. Such interesting behaviors were rarely observed in porphyrin derivatives. This self‐modulation feature opens up the possibility of controlling molecular conformation by varying concentration.     

Square‐grid coordination networks of (5,10,15,20‐tetra‐4‐pyridylporphyrinato)zinc(II) in its clathrate with two guest molecules of 1,2‐dichlorobenzene: supramolecular isomerism of the porphyrin self‐assembly

The title compound, (5,10,15,20‐tetra‐4‐pyridylporphyrinato)zinc(II) 1,2‐dichlorobenzene disolvate, [Zn(C₄₀H₂₄N₈)]·2C₆H₄Cl₂, contains a clathrate‐type structure. It is composed of two‐dimensional square‐grid coordination networks of the self‐assembled porphyrin moiety, which are stacked one on top of the other in a parallel manner. The interporphyrin cavities of the overlapping networks combine into channel voids accommodated by the dichlorobenzene solvent. Molecules of the porphyrin complex are located on crystallographic inversion centres. The observed two‐dimensional assembly mode of the porphyrin units represents a supramolecular isomer of the unique three‐dimensional coordination frameworks of the same porphyrin building block observed earlier. The significance of this study lies in the discovery of an additional supramolecular isomer of the rarely observed structures of metalloporphyrins self‐assembled directly into extended coordination polymers without the use of external ligand or metal ion auxiliaries.     

Polyelectrolyte‐Assisted Noncovalent Functionalization of Carbon Nanotubes with Ordered Self‐Assemblies of a Water‐Soluble Porphyrin

The self‐assembly and induced supramolecular chirality of meso‐tetrakis(4‐sulfonatophenyl)porphyrin (TSPP) on both single‐wall (SWCNT) and multiwall carbon nanotubes (MWCNT) are investigated. Under mild pH conditions (pH 3), TSPP forms aggregates when CNTs are dispersed in an aqueous solution containing positively charged polyelectrolytes such as poly‐L ‐lysine (PLL) or poly(allylamine hydrochloride) (PAH). Evidence for the geometry of the porphyrin aggregates is obtained from absorption spectra, whereby the fingerprints of J‐ and H‐aggregates are clearly seen only in the presence of smaller‐diameter nanotubes. J‐aggregates are better stabilized with PLL, whereas in the presence of PAH mainly H‐aggregates prevail. Excited‐state interactions within these nanohybrids are studied by steady‐state and time‐resolved fluorescence. The porphyrin emission intensity in the nanohybrid solution is significantly quenched compared to that of TSPP alone, and this implies strong electronic interaction between CNTs and porphyrin molecules. Fluorescence lifetime imaging microscopy (FLIM) further supports that porphyrin arrays are associated with the MWCNT sidewalls wrapped in PLL. In the case of the SWCNT hybrid, spherical structures associated with longer fluorescence lifetime appeared after one week, indicative of H‐aggregates of TSPP. The latter are the result of π–π stacking of porphyrin units on neighboring nanotubes facilitated by the strong tendency of these nanotubes to interact with each other. These results highlight the importance of optimum dimensions and surface‐area architectures of CNTs in the control/stability of the porphyrin aggregates with promising properties for light harvesting.     

Controlled Supramolecular Architecture Transformation from Homopolymer to Copolymer through Competitive Self‐Sorting Method

Supramolecular copolymers can not only enrich the diversity of the polymer backbone but also exhibit certain special and improved properties compared with supramolecular homopolymers. However, the synthesis procedure of supramolecular copolymers is relatively complicated and time‐consuming. Herein, a simple transformation from an AB₂‐based supramolecular hyperbranched homopolymer to an AB₂+CD₂‐based supramolecular hyperbranched alternating copolymer by the “competitive self‐sorting” strategy is reported. After adding CD₂ monomer, which bears a competitive neutral guest moiety ( TAPN ) and two receptive benzo‐21‐crown‐7 host moieties ( B21C7 ), to the as‐prepared AB₂‐type supramolecular hyperbranched homopolymer constructed by the self‐assembly of dialkylammonium salt ( DAAS , A group)‐functionalized pillar[5]arene ( MeP5 , B groups) monomers, the initial homopolymer structure is disrupted and then reassemble into a new supramolecular hyperbranched alternating copolymer based on the competitive self‐sorting interaction between MeP5 ‐ TAPN and B21C7 ‐ DAAS . This study supplies a convenient approach to directly transform supramolecular homopolymers into supramolecular copolymers.

     

Muconato‐bridged Manganese Coordination Polymer exhibiting rare Distorted‐trigonal Prismatic Coordination Arrangement

Novel poly[Mn(H₂O)(dmb)(muco)] ( 1 ) (H₂muco = trans,trans‐muconic acid; dmb = 5,5′‐dimethyl‐2,2′‐bipyridine) was obtained by self‐assembly, one‐pot, solution reaction. 1 crystallizes in a monoclinic system with P2₁ space group and forms an infinite one‐dimensional (1D) polymer. Remarkably, the six‐coordinate Mn^II display a rare distorted trigonal prismatic configuration. This unusual coordination arrangement appears to be acquired due to the supramolecular interactions of the polymeric structure of 1 , mainly throughout hydrogen bonding, giving rise to a 2D framework. Magnetic properties measurements reveal that 1 possesses weak antiferromagnetic interactions with θ_(C–W) = –1.0 K and J = 458 cm^–1.