Judicious Choice of N‐Heterocycles for the Realization of Sky‐Blue‐ to Green‐Emitting Carbazolylgold(III) C^C^N Complexes and Their Applications for Organic Light‐Emitting Devices

A new class of sky‐blue‐ to green‐emitting carbazolylgold(III) C^C^N complexes containing pyrazole or benzimidazole moieties has been successfully designed and synthesized. Through the judicious choice of the N‐heterocycles in the cyclometalating ligand and the tailor‐made carbazole moieties, maximum photoluminescence quantum yields of 0.52 and 0.39 have been realized in the green‐ and sky‐blue‐emitting complexes, respectively. Solution‐processed and vacuum‐deposited organic light‐emitting devices (OLEDs) based on the benzimidazole‐containing complexes have been prepared. The sky‐blue‐emitting device shows an emission peaking at 484 nm with a narrow full‐width at half‐maximum of 57 nm (2244 cm^?1), demonstrating the potential of this class of complexes in the application of OLEDs with high color purity. In addition, high maximum external quantum efficiencies of 12.3 % and a long operational half‐lifetime of over 5300 h at 100 cd m^?2 have been achieved in the vacuum‐deposited green‐emitting devices.     

Sterically Hindered Luminescent PtII–Phosphite Complexes for Electroluminescent Devices

Pt^II complexes with one bulky, sterically demanding, tertiary phosphite ancillary ligand and a coordinating chromophore are herein presented. The phosphite ligand, tris(2,4‐di‐tert‐butylphenyl) acts as a bidentate ligand coordinating the platinum ion through the central phosphorus atom and a cyclometalating carbon atom of one of the substituents. The two free phenoxy moieties lie above and below the coordination plane, leading to steric hindrance that avoids aggregation and provides solubility in organic solvents. The other two coordination sites on the central metal ion are occupied by a chromophoric ligand, which is responsible for the energy of the luminescent excited state. This separation of functions, on the two coordinated ligands, allows the use of a wider range of luminophores with good luminescent properties, maintaining the control of the intermolecular interactions with the non‐chromophoric ligand. Based on this approach we were able to achieve a bright deep blue emission (λ=444 nm, Φ_em=0.38) from a complex with a tailored ligand, which was then used for the fabrication of an electroluminescent device. In addition commercially available luminophores were also employed to synthesize green emitters.     

Novel Emission Color‐Tuning Strategies in Heteroleptic Phosphorescent Ir(III) and Pt(II) Complexes

Color‐tuning for phosphorescent emitters in organic light‐emitting diodes (OLEDs) across the entire visible spectrum is prerequisite to fulfil flexible full‐color displays and white solid‐state lighting. Heteroleptic 2‐phenylpyridine‐type (ppy‐type) Ir(III) and Pt(II) complexes as phosphorescent emitters have been well exploited in the electroluminescence (EL) field due to their outstanding EL performance. Furthermore, the photophysical characters of these heteroleptic Ir(III) and Pt(II) complexes are generally dominated by the nature of cyclometalating ppy‐type ligands. Accordingly, either sophisticated modification or judicious combination of different cyclometalating ppy‐type ligands will provide a wonderful platform to tune their emission color. In this personal account, we put a special emphasis on our contributions to the novel color‐tuning strategies in these heteroleptic ppy‐type Ir(III) and Pt(II) complexes. In addition, afforded by our novel color‐tuning strategies, ambipolar character or enhanced electron injection/transport (EI/ET) features can be furnished to bring high EL performances.     

Luminescent Ionic Transition‐Metal Complexes for Light‐Emitting Electrochemical Cells

Higher efficiency in the end‐use of energy requires substantial progress in lighting concepts. All the technologies under development are based on solid‐state electroluminescent materials and belong to the general area of solid‐state lighting (SSL). The two main technologies being developed in SSL are light‐emitting diodes (LEDs) and organic light‐emitting diodes (OLEDs), but in recent years, light‐emitting electrochemical cells (LECs) have emerged as an alternative option. The luminescent materials in LECs are either luminescent polymers together with ionic salts or ionic species, such as ionic transition‐metal complexes (iTMCs). Cyclometalated complexes of Ir^III are by far the most utilized class of iTMCs in LECs. Herein, we show how these complexes can be prepared and discuss their unique electronic, photophysical, and photochemical properties. Finally, the progress in the performance of iTMCs based LECs, in terms of turn‐on time, stability, efficiency, and color is presented.     

Phosphorescent Cyclometalated Iridium(III) Complexes That Contain Substituted 2‐Acetylbenzo[b]thiophen‐3‐olate Ligand for Red Organic Light‐Emitting Devices

We report the synthesis of a new class of thermally stable and strongly luminescent cyclometalated iridium(III) complexes 1 – 6 , which contain the 2‐acetylbenzo[b]thiophene‐3‐olate (bt) ligand, and their application in organic light‐emitting diodes (OLEDs). These heteroleptic iridium(III) complexes with bt as the ancillary ligand have a decomposition temperature that is 10–20 % higher and lower emission self‐quenching constants than those of their corresponding complexes with acetylacetonate (acac). The luminescent color of these iridium(III) complexes could be fine‐tuned from orange (e.g., 2‐phenyl‐6‐(trifluoromethyl)benzo[d]thiazole (cf₃bta) for 4 ) to pure red (e.g., lpt (Hlpt=4‐methyl‐2‐(thiophen‐2‐yl)quinolone) for 6 ) by varying the cyclometalating ligands (C‐deprotonated C^N). In particular, highly efficient OLEDs based on 6 as dopant (emitter) and 1,3‐bis(carbazol‐9‐yl)benzene (mCP) as host that exhibit stable red emission over a wide range of brightness with CIE chromaticity coordinates of (0.67, 0.33) well matched to the National Television System Committee (NTSC) standard have been fabricated along with an external quantum efficiency (EQE) and current efficiency of 9 % and 10 cd A^?1, respectively. A further 50 % increase in EQE (>13 %) by replacing mCP with bis[4‐(6H‐indolo[2,3‐b]quinoxalin‐6‐yl)phenyl]diphenylsilane (BIQS) as host for 6 in the red OLED is demonstrated. The performance of OLEDs fabricated with 6 (i.e., [(lpt)₂Ir(bt)]) was comparable to that of the analogous iridium(III) complex that bore acac (i.e., [(lpt)₂Ir(acac)]; 6 a in this work) [Adv. Mater.­ 2011 , 23, 2981] fabricated under similar conditions. By using ntt (Hnnt=3‐hydroxynaphtho[2,3‐b]thiophen‐2‐yl)(thiophen‐2‐yl)methanone) ligand, a substituted derivative of bt, the [(cf₃bta)₂Ir(ntt)] was prepared and found to display deep red emission at around 700 nm with a quantum yield of 12 % in mCP thin film.     

Achieving Pure Green Electroluminescence with CIEy of 0.69 and EQE of 28.2% from an Aza‐Fused Multi‐Resonance Emitter

Pure green emitters are essential for realizing an ultrawide color gamut in next‐generation displays. Herein, by fusing the difficult‐to‐access aza‐aromatics onto B (boron)–N (nitrogen) skeleton, a hybridized multi‐resonance and charge transfer (HMCT) molecule AZA‐BN was successfully synthesized through an effective one‐shot multiple cyclization method. AZA‐BN shows pure green fluorescence with photoluminance quantum yield of 99.7 %. The corresponding green device exhibits a maximum external quantum efficiency and power efficiency of 28.2 % and 121.7 lm W^?1, respectively, with a full width half maximum (FWHM) of merely 30 nm and Commission Internationale de l'Eclairage (CIE) coordinate y of 0.69, representing the purest green bottom‐emitting organic light‐emitting diode.     

Sky-Blue Triplet Emitters with Cyclometalated Imidazopyrazine-Based NHC-Ligands and Aromatic Bulky Acetylacetonates

Platinum(II) complexes with an N-heterocyclic carbene and a cyclometalating phenyl ligand (C^C*) are excellent candidates as efficient blue triplet emitters for OLED applications. The electronic and photophysical properties of these complexes can be fine-tuned with the objective to increase the quantum yields and lower the phosphorescence decay times. We found that platinum complexes with an imidazopyrazine C^C* ligand and bulky acetylacetonates are sky-blue triplet emitters, characterised by an almost unitary quantum yield and short phosphorescence decay times.     

Thermally Robust and Tuneable Phosphorescent Gold(III) Complexes Bearing (N^N)-Type Bidentate Ligands as Ancillary Chelates

Phosphorescent mono-cyclometalated gold(III) complexes and their possible applications in organic light emitting diodes (OLEDs) can be significantly enhanced with their improved thermal stability by suppressing the reductive elimination of the respective ancillary ligands. A rational tuning of the π-conjugation of the cyclometalating ligand in conjunction with the non-conjugated 5,5′-(1-methylethylidene)bis(3-trifluoromethyl)-1H-pyrazole were used as a strategy to achieve room-temperature phosphorescence emission in a new series of gold(III) complexes. Photophysical studies of the newly synthesised and characterised complexes revealed phosphorescent emission of the complexes at room temperature in solution, thin films when doped in poly(methyl methacrylate) (PMMA) as well as in 2-Me-THF at 77 K. The complexes exhibit highly tuneable emission behaviour with photoluminescent quantum efficiencies up to 22 % and excited state lifetimes in the range of 63–300 μs. Detailed photophysical investigations in combination with DFT and TD-DFT calculations support the conclusion that the emission properties are strongly dictated by both the cyclometalating ligand and the ancillary chelating ligand. Thermogravimetric studies further show that the thermal stability of the Au^III complexes has been drastically enhanced, making these complexes more attractive for OLED applications.     

Highly soluble green‐emitting Ir(III) complexes with 9‐(6‐phenyl‐pyridin‐3‐ylmethyl)‐9H‐carbazole ligands and their application to polymer light‐emitting diodes

Highly organic soluble Ir(III) complexes with 9‐(6‐phenyl‐pyridin‐3‐ylmethyl)‐9H‐carbazole were simply synthesized, and the solubility of the new complex was significantly improved when compared with the conventional green‐emitting Ir(ppy)₃. Since a carbazole group is tethered through a nonconjugated methylene spacer, the photophysical properties of new complexes are almost identical with those of conventional Ir(ppy)₃. The pure complexes were utilized to prepare electrophosphorescent polymer light‐emitting diodes (PLEDs). The device performances were observed to be relatively better or comparable with those of Ir(ppy)₃ based poly(N‐vinylcarbazole) systems. The integration of rigid hole‐transporting carbazole and phosphorescent complex provides a new route to design highly efficient solution‐processable complex for electrophosphorescent PLED applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7419–7428, 2008     

Enantioselective Alkynylation of 2‐Trifluoroacetyl Imidazoles Catalyzed by Bis‐Cyclometalated Rhodium(III) Complexes Containing Pinene‐Derived Ligands

Chiral rhodium(III) complexes containing two cyclometalating 2‐phenyl‐5,6‐(S,S)‐pinenopyridine ligands and two additional acetonitriles are introduced as excellent catalysts for the highly enantioselective alkynylation of 2‐trifluoroacetyl imidazoles. Whereas the ligand‐based chirality permits the straightforward synthesis of the complexes in a diastereomerically and enantiomerically pure fashion, the metal‐centered chirality is responsible for the asymmetric induction over the course of the catalysis. For comparison, the analogous iridium congeners provide only low enantioselectivity, and previously reported benzoxazole‐ and benzothiazole‐based catalysts do not show any catalytic activity for this reaction under standard reaction conditions.     

Star‐Shaped Trinuclear Cyclometalated Platinum(II) Complexes as Single‐Component Emitters in White‐Emitting PLEDs

Two star‐shaped phosphorescent small molecules, Ph‐3FPt(pic) and 4Ph‐3FPt(pic), are single‐component emitters in polymer white‐light‐emitting diodes (WPLEDs) that are comprised of three blue–light‐emitting phosphorescent chromophores of FPt(pic) and are attached to benzene‐1,3,5‐trioxy‐ and 1,3,5‐tri(4‐oxyphenyl)benzene cores through a hexyloxy chain, respectively. Compared to their corresponding mono‐ or dinuclear platinum complexes, this class of star‐shaped homotrinuclear cyclometalated platinum(II) complexes exhibited controllable excimer emission. Stable white/near‐white emission was obtained in single‐emissive‐layer PLEDs by using the Ph‐3FPt(pic) or 4Ph‐3FPt(pic) as a single dopant and a blend of poly(vinylcarbazole) and 2‐(4‐biphenyl)‐5‐(4‐tert‐butyl‐phenyl)‐1,3,4‐oxadiazole as a host matrix at dopant concentrations of 1–4 wt. %. Our results provide an efficient way to control excimer formation and to obtain a single‐component emitter for use in WPLEDs.     

Determination of the relative ligand‐binding strengths in heteroleptic IrIII complexes by ESI‐Q‐TOF tandem mass spectrometry

An electrospray ionization quadrupole time‐of‐flight mass spectrometer has been utilized to investigate the relative ligand‐binding strengths in a series of heteroleptic‐charged iridium(III) complexes of the general formula [(C^N)₂Ir^III(S‐tpy)](PF₆) by using variable collision energies. Collision‐induced dissociation experiments were performed in order to study the stability of the Ir^III complexes that are, for instance, suitable phosphors in light‐emitting electrochemical cells. The ratio of signal intensities belonging to the fragment and the undissociated complex depends on the collision energy applied for the tandem mass spectra (MS/MS) analysis. By defining the threshold collision energy and the point of complete complex dissociation, it is possible to estimate the relative complex stabilities depending on the nature of the coordinated ligands [i.e. type of cyclometalating ligand (C^N), substituents on the S‐shaped terpyridine (S‐tpy)]. The collision energy values differed as a function of the coordination sphere of the Ir^III centers. Copyright © 2011 John Wiley & Sons, Ltd.     

Molecular design of efficient white‐light‐emitting fluorene‐based copolymers by mixing singlet and triplet emission

A new strategy to realize efficient white‐light emission from a binary fluorene‐based copolymer (PF‐Phq) with the fluorene segment as a blue emitter and the iridium complex, 9‐iridium(III)bis(2‐(2‐phenyl‐quinoline‐N,C³′)(11,13‐tetradecanedionate))‐3,6‐carbazole (Phq), as a red emitter has been proposed and demonstrated. The photo‐ and electroluminescence properties of the PF‐Phq copolymers were investigated. White‐light emission with two bands of blue and red was achieved from the binary copolymers. The efficiency increased with increasing concentration of iridium complex, which resulted from its efficient phosphorescence emission and the weak phosphorescent quenching due to its lower triplet energy level than that of polyfluorene. In comparison with the binary copolymer, the efficiency and color purity of the ternary copolymers (PF‐Phq‐BT) were improved by introducing fluorescent green benzothiadiazole (BT) unit into polyfluorene backbone. This was ascribed to the exciton confinement of the benzothiadiazole unit, which allowed efficient singlet energy transfer from fluorene segment to BT unit and avoided the triplet quenching resulted from the higher triplet energy levels of phosphorescent green emitters than that of polyfluorene. The phosphorescence quenching is a key factor in the design of white light‐emitting polyfluorene with triplet emitter. It is shown that using singlet green and triplet red emitters is an efficient approach to reduce and even avoid the phosphorescence quenching in the fluorene‐based copolymers. The strategy to incorporate singlet green emitter to polyfluorene backbone and to attach triplet red species to the side chain is promising for white polymer light‐emitting diodes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 453–463, 2008     

Computational studies on the injection,transport, absorption,and phosphoresce properties of a series of cationic iridium (III) complexes [Ir(C∧N)2(L)2]+ (C∧N = ppy,tpy, dfppy,bzq)

Quantum chemistry methods are applied to investigate the electronic structures, injection and transport properties, absorption and phosphorescence mechanism of a series of Iridium (III) complexes [Ir(C∧N)₂(L)₂]⁺ (L = 4‐pyCO₂Et; C∧N = 2‐phenylpyridine, 1 ; 2‐(4‐tolyl)pyridine, 2 ; 2‐(4,6‐difluorophenyl)pyridimato, 3 ; benzoquinoline, 4 ), which may be used as emitters on organic light emitting diodes (OLEDs). Calculations of ionization potentials and electron affinities are used to evaluate the injection abilities of holes and electrons into these complexes. The reorganization energy (λ) calculations show that the four complexes are suitable as emitters in OLEDs. The absorptions and emissions can be tuned by adding substituent to the ppy ligand or extending the π‐conjugation effect of the C∧N ligand, and quantum yields of 1 – 4 are investigated. In addition, no solvent effect is observed in the absorption and emission spectra. © 2012 Wiley Periodicals, Inc.     

Yellow Circularly Polarized Luminescence from C1‐Symmetrical Copper(I) Complexes

The synthesis of chiral C₁‐symmetrical copper(I) complexes supported by chiral carbene ligands is described. These complexes are yellow emitters with modest quantum yields. Circularly polarized luminescence (CPL) spectra show a polarized emission band with dissymmetry factors |g_lum|=1.2×10^?3. These complexes are the first reported examples of molecular copper(I) complexes exhibiting circularly polarized luminescence. In contrast with most CPL‐emitting molecules, which possess either helical or axial chirality, the results presented show that simple chiral architectures are suitable for CPL emission and unlock new synthetic possibilities.     

Near‐IR Emitting Iridium(III) Complexes with Heteroaromatic β‐Diketonate Ancillary Ligands for Efficient Solution‐Processed OLEDs: Structure–Property Correlations

Three NIR‐emitting neutral Ir^III complexes [Ir(iqbt)₂(dpm)] ( 1 ), [Ir(iqbt)₂(tta)] ( 2 ), and [Ir(iqbt)₂(dtdk)] ( 3 ) based on the 1‐(benzo[b]thiophen‐2‐yl)‐isoquinolinate (iqtb) were synthesized and characterized (dpm=2,2,6,6‐tetramethyl‐3,5‐heptanedionate; tta=2‐thienoyltrifluoroacetonate; dtdk=1,3‐di(thiophen‐2‐yl)propane‐1,3‐dionate). The compounds emit between λ=680 and 850 nm with high luminescence quantum yields (up to 16 %). By combining electrochemistry, photophysical measurements, and computational modelling, the relationship between the structure, energy levels, and properties were investigated. NIR‐emitting, solution‐processed phosphorescent organic light‐emitting devices (PHOLEDs) were fabricated using the complexes. The devices show remarkable external quantum efficiencies (above 3 % with 1 ) with negligible efficiency roll‐off values, exceeding the highest reported values for solution‐processible NIR emitters.     

A Novel trans‐1‐(9‐Anthryl)‐2‐phenylethene Derivative Containing a Phenanthroimidazole Unit for Application in Organic Light‐Emitting Diodes

Aryl‐substituted phenanthroimidazoles (PIs) have attracted tremendous attention in the field of organic light‐emitting diodes (OLEDs), because they are simple to synthesize and have excellent thermal properties, high photoluminescence quantum yields (PLQYs), and bipolar properties. Herein, a novel blue–green emitting material, (E)‐2‐{4′‐[2‐(anthracen‐9‐yl)vinyl]‐[1,1′‐biphenyl]‐4‐yl}‐1‐phenyl‐1H‐phenanthro[9,10‐d]imidazole (APE‐PPI), containing a t‐APE [1‐(9‐anthryl)‐2‐phenylethene] core and a PI moiety was designed and synthesized. Owing to the PI skeleton, APE‐PPI possesses high thermal stability and a high PLQY, and the compound exhibits bipolar transporting characteristics, which were identified by single‐carrier devices. Nondoped blue–green OLEDs with APE‐PPI as the emitting layer show emission at λ=508 nm, a full width at half maximum of 82 nm, a maximum brightness of 9042 cd m^?2, a maximum current efficiency of 2.14 cd A^?1, and Commission Internationale de L'Eclairage (CIE) coordinates of (0.26, 0.55). Furthermore, a white OLED (WOLED) was fabricated by employing APE‐PPI as the blue–green emitting layer and 4‐(dicyanomethylene)‐2‐tert‐butyl‐6‐(1,1,7,7‐tetramethyljulolidin‐4‐yl‐vinyl)‐4H‐pyran (DCJTB) doped in tris‐(8‐hydroxyquinolinato)aluminum (Alq₃) as the red–green emitting layer. This WOLED exhibited a maximum brightness of 10029 cd m^?2, a maximum current efficiency of 16.05 cd A^?1, CIE coordinates of (0.47, 0.47), and a color rendering index (CRI) of 85. The high performance of APE‐PPI‐based devices suggests that the t‐APE and PI combination can potentially be used to synthesize efficient electroluminescent materials for WOLEDs.     

Tunable Emissive Lanthanidomesogen Derived from a Room‐Temperature Liquid‐Crystalline Schiff‐Base Ligand

A novel photoluminescent room‐temperature liquid‐crystalline salicylaldimine Schiff base with a short alkoxy substituent and a series of lanthanide(III) complexes of the type [Ln(LH)₃(NO₃)₃] (Ln=La, Pr, Sm, Gd, Tb, Dy; LH=(E)‐5‐(hexyloxy)‐2‐ [{2‐(2‐hydroxyethylamino)ethylimino]methyl}phenol) have been synthesized and characterized by FTIR, ¹H and ¹³C NMR, UV/Vis, and FAB‐MS analyses. The ligand coordinates to the metal ions in its zwitterionic form. The thermal behavior of the compounds was investigated by polarizing optical microscopy (POM) and differential scanning calorimetry (DSC). The ligand exhibits an enantiotropic hexagonal columnar (Col_h) mesophase at room temperature and the complexes show an enantiotropic lamellar columnar (Col_L) phase at around 120 °C with high thermal stability. Based on XRD results, different space‐filling models have been proposed for the ligand and complexes to account for the columnar mesomorphism. The ligand exhibits intense blue emission both in solution and in the condensed state. The most intense emissions were observed for the samarium and terbium complexes, with the samarium complex glowing with a bright‐orange light (ca. 560–644 nm) and the terbium complex emitting green light (ca. 490–622 nm) upon UV irradiation. DFT calculations performed by using the DMol3 program at the BLYP/DNP level of theory revealed a nine‐coordinate structure for the lanthanide complexes.     

Highly Emissive Fused Heterocyclic Alkynylgold(III) Complexes for Multiple Color Emission Spanning from Green to Red for Solution‐Processable Organic Light‐Emitting Devices

A new class of fused heterocyclic tridentate ligand‐containing alkynylgold(III) complexes with tunable emission color has been successfully designed and synthesized. Structural modification of the σ‐donating fused heterocyclic alkynyl ligands, including substituted fluorene, carbazole, and triphenylamine, enables a large spectral shift of about 110 nm (ca. 3310 cm^?1) that covers the green to red region to be realized with the same tridentate ligand‐containing alkynylgold(III) complexes in solid‐state thin films. Interestingly, the energy of the excimeric emission can be controlled by the rational design of the fused heterocyclic alkynyl ligands. Superior solution‐processable organic light‐emitting devices (OLEDs) with high external quantum efficiencies (EQEs) of 12.2, 13.5, 9.3, and 5.2 % were obtained with green, yellow, orange, and red emission. These high EQE values are comparable to those of the vacuum‐deposited OLEDs based on structurally related alkynylgold(III) complexes.     

Bimetallic Cyclometalated Iridium(III) Diastereomers with Non‐Innocent Bridging Ligands for High‐Efficiency Phosphorescent OLEDs

Two phosphorescent dinuclear iridium(III) diastereomers (ΛΔ/ΔΛ) and (ΛΛ/ΔΔ) are readily separated by making use of their different solubilities in hot hexane. The bridging diarylhydrazide ligand plays an important role in the electrochemistry and photophysics of the complexes. Organic light‐emitting devices (OLEDs) that use these complexes as the green‐emissive dopants in solution‐processable single‐active‐layer architectures feature electroluminescence efficiencies that are remarkably high for dinuclear metal complexes, achieving maximum values of 37 cd A^?1, 14 lm W^?1, and 11 % external quantum efficiency.