Upper critical solution temperature type phase behavior of poly(styrene‐co‐acrylonitrile) blends with poly(styrene‐co‐n‐phenyl maleimide) and their interaction energies

To enhance the heat resistance of poly(styrene‐co‐acrylonitrile‐co‐butadiene), ABS, miscibility of poly(styrene‐co‐acrylonitrile), SAN, with poly(styrene‐co‐n‐phenyl maleimide), SNPMI, having a higher glass transition temperature than SAN was explored. SAN/SNPMI blends casted from solvent were immiscible regardless of copolymer compositions. However, SNPMI copolymer forms homogeneous mixtures with SAN copolymer within specific ranges of copolymer composition upon heating caused by upper critical solution temperature, UCST, type phase behavior. Since immiscibility of solvent casting samples can be driven by solvent effects even though SAN/SNPMI blends are miscible, UCST‐type phase behavior was confirmed by exploring phase reversibility. When copolymer composition of SNPMI was fixed, the phase homogenization temperature of SAN/SNPMI blends was increased as AN content in SAN copolymer increased. To understand the observed phase behavior of SAN/SNPMI blend, interaction energies of blends were calculated from the UCST‐type phase boundaries by using the lattice‐fluid theory combined with a binary interaction model. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1131–1139, 2008     

Photocrosslinked poly(vinylbenzophenone)‐core micelles via mild Friedel–Crafts benzoylation of polystyrene amphiphiles

Photocrosslinkable poly(vinylbenzophenone)‐containing polymers were synthesized via a one‐step, Friedel–Crafts benzoylation of polystyrene‐containing starting materials [including polystyrene, polystyrene‐block‐poly(tert‐butyl acrylate), polystyrene‐block‐poly(ethylene oxide), polystyrene‐block‐poly(methyl methacrylate), and polystyrene‐block‐poly(n‐butyl acrylate)] with benzoyl trifluoromethanesulfonate as a benzoylation reagent. The use of this mild reagent (which required no added Lewis acid) permitted polymers with well‐defined compositions and narrow molecular weight distributions to be synthesized. Micelles formed from one of these benzoylated polymers, [polystyrene_0.25‐co‐poly(vinylbenzophenone)_0.75]₁₁₅‐block‐poly(acrylic acid)₁₄, were then fixed by the irradiation of the micelle cores with UV light. As the irradiation time was increased, the pendent benzophenone groups crosslinked with other chains in the glassy micelle cores. Dynamic light scattering, spectrofluorimetry, and Fourier transform infrared spectroscopy were all used to verify the progress of the crosslinking reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2604–2614, 2006     

Facile synthesis of triple‐stimuli (photo/pH/thermo) responsive copolymers of 2‐diazo‐1,2‐naphthoquinone‐mediated poly(N‐isopropylacrylamide‐co‐N‐hydroxymethylacrylamide)

A series of poly(N‐isopropylacrylamide‐co‐N‐hydroxymethylacrylamide) P(NIPAM‐co‐NHMA) copolymers were firstly synthesized via free radical polymerization. Then, the hydrophobic, photosensitive 2‐diazo‐1,2‐naphthoquinone (DNQ) molecules were partially and randomly grafted onto P(NIPAM‐co‐NHMA) backbone through esterification to obtain a triple‐stimuli (photo/pH/thermo) responsive copolymers of P(NIPAM‐co‐NHMA‐co‐DNQMA). UV‐vis spectra showed that the lower critical solution temperature (LCST) of P(NIPAM‐co‐NHMA) ascended with increasing hydrophilic comonomer NHMA molar fraction and can be tailored by pH variation as well. The LCST of the P(NIPAM‐co‐NHMA) went down firstly after DNQ modification and subsequently shifted to higher value after UV irradiation. Meanwhile, the phase transition profile of P(NIPAM‐co‐NHMA‐co‐DNQMA) could be triggered by pH and UV light as expected. Thus, a triple‐stimuli responsive copolymer whose solution properties could be, respectively, modulated by temperature, light, and pH, has been achieved. These stimuli‐responsive properties should be very important for controlled release delivery system. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2763–2773, 2009     

Synthesis of polymeric microspheres from a Merrifield resin by surface‐initiated nitroxide‐mediated radical polymerization

Polymeric microspheres were prepared from a Merrifield resin via nitroxide‐mediated radical polymerization. Polystyrene, poly(acetoxystyrene), and poly[styrene‐b‐(methyl methacrylate‐co‐styrene)], poly(acetoxystyrene‐b‐styrene), and poly(styrene‐co‐2‐hydroxyethyl methacrylate) copolymers were demonstrated to graft onto 2,2,6,6‐tetramethyl‐1‐piperidinyloxy nitroxide bound Merrifield resins. The polymerization control was enhanced both on the surface and in solution by the addition of sacrificial nitroxide. The significant increase in the particle diameter (more than a fivefold volume increase for polystyrene brushes) showed that polymer growth was not only on the surface but also within the particles, and this diameter increase could be adjusted through changes in the molecular weight of the polymers. The microspheres were characterized by elemental analysis, IR spectroscopy, particle size analysis, and optical microscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2145–2154, 2005     

One‐stage synthesis of narrowly dispersed polymeric core‐shell microspheres

A method of one‐stage soap‐free emulsion polymerization to synthesize narrowly dispersed core‐shell microspheres is proposed. Following this method, core‐shell microspheres of poly(styrene‐co‐4‐vinylpyridine), poly(styrene‐co‐methyl acrylic acid), and poly[styrene‐co‐2‐(acetoacetoxy)ethyl methacrylate‐co‐methyl acrylic acid] are synthesized by one‐stage soap‐free emulsion polymerization of a mixture of one or two hydrophobic monomers and a suitable hydrophilic monomer in water. The effect of the molar ratio of the hydrophobic monomer to the hydrophilic one on the size, the core thickness, and the shell thickness of the core‐shell microspheres is discussed. The molar ratio of the hydrophobic and hydrophilic monomers and the hydrophilicity of the resultant oligomers of the hydrophilic monomer are optimized to synthesize narrowly dispersed core‐shell microspheres. A possible mechanism of one‐stage soap‐free emulsion polymerization to synthesize core‐shell microspheres is suggested and coagglutination of the oligomers of the hydrophilic monomers on the hydrophobic core is considered to be the key to form core‐shell microspheres. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1192–1202, 2008     

Synthesis and characterization of well‐defined poly(2‐hydroxyethyl methacrylate‐co‐styrene)‐graft‐poly(ε‐caprolactone) by sequential controlled polymerization

A new graft copolymer, poly(2‐hydroxyethyl methacrylate‐co‐styrene) ‐graft‐poly(?‐caprolactone), was prepared by combination of reversible addition‐fragmentation chain transfer polymerization (RAFT) with coordination‐insertion ring‐opening polymerization (ROP). The copolymerization of styrene (St) and 2‐hydroxyethyl methacrylate (HEMA) was carried out at 60 °C in the presence of 2‐phenylprop‐2‐yl dithiobenzoate (PPDTB) using AIBN as initiator. The molecular weight of poly (2‐hydroxyethyl methacrylate‐co‐styrene) [poly(HEMA‐co‐St)] increased with the monomer conversion, and the molecular weight distribution was in the range of 1.09 ～ 1.39. The ring‐opening polymerization (ROP) of ?‐caprolactone was then initiated by the hydroxyl groups of the poly(HEMA‐co‐St) precursors in the presence of stannous octoate (Sn(Oct)₂). GPC and ¹H‐NMR data demonstrated the polymerization courses are under control, and nearly all hydroxyl groups took part in the initiation. The efficiency of grafting was very high. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5523–5529, 2004     

Synthesis of poly(isobutyl‐co‐2,2,2‐trifluoroethyl methacrylate) with 5,10,15,20‐tetraphenylporphinato platinum(II) moiety as an oxygen‐sensing dye for pressure‐sensitive paint

Pressure‐sensitive paint (PSP), which consists of luminescent molecules embedded in an oxygen‐permeable polymer, has been developed for use in wind‐tunnel experiments. To improve the PSP technique, a novel luminescent methacrylate monomer, 5‐[4‐(2‐methacryloyloxyethoxycarbonyl)phenyl]‐10,15,20‐triphenylporphinato platinum(II), was synthesized and copolymerized with isobutyl methacrylate and 2,2,2‐trifluoroethyl methacrylate to produce a dye‐pendant copolymer ( 2 ). The introduction of 5,10,15,20‐tetraphenylporphinato platinum(II) (PtTPP) dye into 2 was confirmed by ultraviolet–visible spectroscopy and extended X‐ray absorption fine structure measurements. The extent of PtTPP dye incorporation in 2 was proportional to the molar fraction of the PtTPP‐pendant methacrylate monomer in the feed. The oxygen‐sensing property of 2 was compared with that of a PSP consisting of PtTPP dye embedded in poly(isobutyl‐co‐2,2,2‐trifluoroethyl methacrylate). Although the simple mixture of PtTPP and poly(isobutyl‐co‐2,2,2‐trifluoroethyl methacrylate) showed a marked deviation from a single Stern–Volmer relation, novel copolymer 2 gave a highly linear Stern–Volmer plot. This was unequivocal evidence of dye conjugation on the oxygen‐sensing polymer film. © 2005Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2997–3006, 2005     

Controlled radical copolymerization of styrene and maleic anhydride and the synthesis of novel polyolefin‐based block copolymers by reversible addition–fragmentation chain‐transfer (RAFT) polymerization

Reversible addition–fragmentation chain transfer (RAFT) was applied to the copolymerization of styrene and maleic anhydride. The product had a low polydispersity and a predetermined molar mass. Novel, well‐defined polyolefin‐based block copolymers were prepared with a macromolecular RAFT agent prepared from a commercially available polyolefin (Kraton L‐1203). The second block consisted of either polystyrene or poly(styrene‐co‐maleic anhydride). Furthermore, the colored, labile dithioester moiety in the product of the RAFT polymerizations could be removed from the polymer chain by UV irradiation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3596–3603, 2000     

A visible light responsive azobenzene‐functionalized polymer: Synthesis,self‐assembly,and photoresponsive properties

A novel visible light responsive random copolymer consisting of hydrophobic azobenzene‐containing acrylate units and hydrophilic acrylic acid units has been prepared. The azobenzene molecule bearing methoxy groups at all four ortho positions is readily synthesized by one‐step conversion of diazotization. The as‐prepared polymer can self‐assemble into nanoparticles in water due to its amphiphilic nature. The tetra‐o‐methoxy‐substituted azobenzene‐functionalized polymer can exhibit the trans‐to‐cis photoswitching under the irradiation with green light of 520 nm and the cis‐to‐trans photoswitching under the irradiation with blue light of 420 nm in both solution and aggregate state. The morphologies of the self‐assembled nanoparticles are revealed by TEM and DLS. The controlled release of loaded molecules from the nanoparticles can be realized by adjusting pH value since the copolymer possesses pH responsive acrylic acid groups. The fluorescence of loaded Nile Red in the nanoparticles can be tuned upon the visible light irradiation. The reversible photoswitching of the azobenzene‐functionalized polymer under visible light may endow the polymer with wide applications without using ultraviolet light at all. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2768–2775     

Pure white‐light‐emitting diodes from phosphorescent single polymer systems

New white polymeric light‐emitting diodes from phosphorescent single polymer systems have been developed using a blue‐light‐emitting fluorene monomer copolymerized with a red‐light‐emitting phosphorescent dye, and end‐capped with a green‐light‐emission dye. All of the copolymers have good thermal stability with 5% weight loss temperatures at 380–413 °C and glass transition temperatures at 75–137 °C. We obtained white‐light‐emission devices by adjusting the molar ratio of the comonomers with a structure of indium tin oxide/poly(3,4‐ethylenedioxythiophene): poly(styrene sulfonic acid)/polyvinylcarbazole (PVK)/emission layer/Ca/Ag. The highest brightness in such a device configuration is 300 cd/m² at a current density of 2900 A/m² with high white color quality (Commission Internationale de l'Eclairage (CIE) coordinates of (0.33, 0.34)). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 464–472, 2008     

Comparative study of electrostatic binding vs. complexation of Cu2+ ions with water‐soluble polymers containing styrene sulphonic acid and/or maleic acid units or their sodium salt forms

The interaction of Cu²⁺ ions with the homopolymer poly(styrene sulfonic acid) (PSSH), as well as with the copolymers of maleic acid (MAc) with styrene sulfonic acid (SSH) or vinyl acetate (VAc), was investigated in dilute aqueous solution through turbidimetry, potentiometry, viscometry, and spectrophotometry in the visible region. Cu²⁺ ions were introduced either through neutralization with Cu(OH)₂ of the acid form of the (co)polymers (PSSH, P(SSH‐co‐MAc) and P(VAc‐co‐MAc)) or through mixing of the sodium salt form of the (co)polymers (PSSNa, P(SSNa‐co‐MANa) and P(VAc‐co‐MANa)) with CuSO₄. Turbidimetry, potentiometry, and spectrophotometry revealed that the first carboxylic group of MAc or both carboxylate groups of MANa are involved in the complexation with Cu²⁺ ions when neutralization with Cu(OH)₂ or mixing with CuSO₄ are applied, respectively. The increased values of the reduced viscosity observed mainly at the first stages of neutralization of P(VAc‐co‐MAc) with Cu(OH)₂ indicate that interchain polymer‐Cu²⁺ complexation takes possibly place. Finally, the spectrophotometric behavior observed upon neutralization of P(SSH‐co‐MAc) with Cu(OH)₂ or mixing of P(SSNa‐co‐MANa) with CuSO₄ revealed that the strength of counterion binding by the sulfonate groups is, in fact, comparable with the complexation of Cu²⁺ ions with the carboxylate groups of MAc. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1149–1158, 2008     

Synthesis of photoactive single‐chain folded polymeric nanoparticles via combination of radical polymerization techniques and Menschutkin click chemistry

This contribution reports that synthesis of polystyrene based photoactive polymeric nanoparticles by radical copolymerization and Menschutkin Chemistry methodology. In the first step, poly(styrene‐co‐chloromethyl styrene) was achieved by thermally initiated radical copolymerizations and subsequently copolymers were reacted to commercially available Type II photoiniator (Michler's ketone) in dilute condition in order to achieve intramolecular crosslinked polymeric nanoparticles. After the characterization studies, polymeric nanoparticles were used for free radical photopolymerization of methacrylic formulations to determine the initiation efficiency. Upon UV irradiation, resulting polymeric nanoparticle lost its globular structure by releasing benzophenone part and transformed into linear copolymer analogue. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1998–2003     

Preparation of poly(styrene‐co‐acrylonitrile)‐grafted multiwalled carbon nanotubes via surface‐initiated atom transfer radical polymerization

The in situ grafting‐from approach via atom transfer radical polymerization was successfully applied to polystyrene, poly(styrene‐co‐acrylonitrile), and polyacrylonitrile grafted onto the convex surfaces of multiwalled carbon nanotubes (MWCNTs) with (2‐hydroxyethyl 2‐bromoisobutyrate) as an initiator. Thermogravimetric analysis showed that effective functionalization was achieved with the grafting approach. The grafted polymers on the MWCNT surface were characterized and confirmed with Fourier transform infrared spectroscopy and nuclear magnetic resonance. Raman and near‐infrared spectroscopy revealed that the grafting of polystyrene, poly(styrene‐co‐acrylonitrile), and polyacrylonitrile slightly affected the side‐wall structures. Field emission scanning electron microscopy showed that the carbon nanotube surface became rough because of the grafting of the polymers. Differential scanning calorimetry results indicated that the polymers grafted onto MWCNTs showed higher glass‐transition temperatures. The polymer‐grafted MWCNTs exhibited relatively good dispersibility in an organic solvent such as tetrahydrofuran. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 460–470, 2007     

Characterization of poly(styrene‐co‐methacrylonitrile)s obtained by low‐temperature radiation polymerization and thermal degradation behavior measured by Py‐GC and CRTG

Poly(styrene‐co‐methacrylonitrile)s were polymerized in solutions with different polarities (n‐hexane and THF) by low‐temperature γ‐ray irradiation polymerization in a temperature range of −83.6–30 °C. It was found by IR measurement that the composition of the copolymers changed remarkably due to the effects of the polarity of solvents and the polymerization temperature. The thermal degradation behavior in the flash pyrolysis and in the continuous heating pyrolysis of these copolymers was measured by Py‐GC and controlled rate thermogravimetry (CRTG). The effects of the copolymer composition and sequence distribution on the thermal degradation behavior were investigated. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3569–3577, 2000     

Post‐exposure delay stability for 193 nm single‐layer photoresist: Solvent effect

We investigated the effect of post‐exposure delay (PED) for poly[2‐(2‐hydroxyethyl)carboxylate‐5‐norbornene‐co‐2‐t‐butylcarboxylate‐5‐norborene‐co‐2‐carboxylic acid‐5‐norborene‐co‐maleic anhydride] [poly(HNC/BNC/NC/MA)] resist film, which formulated with photoacid generator (PAG) under the several solvents. The solvents used in this study were propylene glycol methyl ether acetate (PGMEA), isobutyl methyl ketone (IBMK), 2‐heptanone (2‐H), and (2‐methoxy)ethyl acetate (MEA). We have introduced a new concept of rheological approach to explain the solvent effect for PED by using rheometer and light scattering equipment. In the PGMEA solvent, the resist solution shows Newtonian behavior, but the other resist solutions show shear‐thinning behavior. The resist film prepared by the shear‐thinning solvent exhibited good PED stability. In order to explain these results, we conjectured that the resist polymer existed in long‐rod shape under the specific solvent and high shear rate. Also, we could obtain 0.16 μm L/S patterns in a severely amine‐contaminated environment (about 35 ppb) after 30 min PED by using this method. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 148–153, 2000     

Synthesis of poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyl groups and its further initiation of the grafting polymerization of styrene

A new stratagem for the synthesis of amphiphilic graft copolymers of hydrophilic poly(ethylene oxide) as the main chain and hydrophobic polystyrene as the side chains is suggested. A poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyls [poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide)] was first prepared by the anionic ring‐opening copolymerization of ethylene oxide and 4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl, and then the graft copolymerization of styrene was completed with benzoyl peroxide as the initiator in the presence of poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide). The polymerization of styrene was under control, and comblike, amphiphilic poly(ethylene oxide)‐g‐polystyrene was obtained. The copolymer and its intermediates were characterized with size exclusion chromatography, ¹H NMR, and electron spin resonance in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3836–3842, 2006     

Single‐chain nanoparticles with well‐defined structure via intramolecular crosslinking of linear polymers with pendant benzoxazine groups

Controlled intramolecular collapse of linear polymer chains with crosslinkable groups is an efficient way to prepare single‐chain nanoparticles in the size range of 5–20 nm. However, the nature of the crosslinking group is critical. In present study, poly(styrene‐co‐chloromethyl styrene) [P(St‐co‐CMS)] was synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization and then was converted into polystyrene azide (PS? N₃). Polystyrene containing benzoxazine side groups [P(St‐co‐BS)], which can be used as the precusor for the later intramolecular collapse, was obtained from PS? N₃ and 3‐(4‐(prop‐2‐ynyloxy)phenyl)‐3,4‐dihydro‐2H‐benzo[e][1,3]oxazine (P‐APPE) via the method of click chemistry. The sub‐20 nm polymeric nanoparticles with well‐defined structure via thermally intramolecular crosslinking of P(St‐co‐BS) were prepared. The structure change from the linear polymers to the single‐chain nanoparticles was confirmed by nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR), and gel permeation chromatography (GPC). The morphology and the dimension of the nanoparticles were characterized by using transmission electron microscope (TEM), atomic force microscopy (AFM), as well as dynamic light scattering (DLS). The results reveal that the size of the nanoparticles can be regulated by changing the molecular weight of the precursors and the amount of pendant benzoxazine groups by the use of controlled polymerization techniques. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Single layer light‐emitting diodes from copolymers comprised of mesogen‐jacketed polymer containing oxadiazole units and PVK

A series of copolymers PCt‐co‐Poly(N‐vinylcarbazole) were synthesized through common radical polymerization, in which P‐Ct as a kind of mesogen‐jacketed liquid crystalline polymer was introduced, and the effects of copolymers composing variation on the optical properties of the polymers were studied. The structures and properties of the copolymers were characterized and evaluated by thermogravimetric (TGA), UV, photoluminescence (PL), cyclic voltammetry (CV), and electroluminescence (EL) analyses. All the polymers enjoy high thermal stability. PL peaks in the film show blue‐shift compared with in solutions and fluorescent quantum efficiency decreased with the N‐vinylcarbazole (nvk) content increasing, which supported the efficient energy transfer from nvk units to the oxadiazole units. CV revealed that, with the incorporation of nvk to the copolymer, these copolymers had high‐lying HOMO energy levels ranging from ?5.94 to ?6.09 eV. Single‐layer light‐emitting diodes (LEDs) with the configuration of ITO/PEDOT/PCt‐nvk/Mg:Ag/Ag were fabricated, which emit a blue light around 450 and 490 nm with a maximum luminance of 703 cd/m². The device performance varies with the content of nvk and device configuration, with device configuration ( b ) and PCt‐nvk8 giving the best value of external quantum efficiency of 0.27%. We show here that by proper design copolymer structure and modification of device configuration can exhibit strong blue EL in higher external quantum efficiency. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1843–1851, 2008     

Synthesis of amphiphilic copolymer brushes: Poly(ethylene oxide)‐graft‐polystyrene

A well‐defined amphiphilic copolymer brush with poly(ethylene oxide) as the main chain and polystyrene as the side chain was successfully prepared by a combination of anionic polymerization and atom transfer radical polymerization (ATRP). The glycidol was first protected by ethyl vinyl ether to form 2,3‐epoxypropyl‐1‐ethoxyethyl ether and then copolymerized with ethylene oxide by the initiation of a mixture of diphenylmethylpotassium and triethylene glycol to give the well‐defined polymer poly(ethylene oxide‐co‐2,3‐epoxypropyl‐1‐ethoxyethyl ether); the latter was hydrolyzed under acidic conditions, and then the recovered copolymer of ethylene oxide and glycidol {poly(ethylene oxide‐co‐glycidol) [poly(EO‐co‐Gly)]} with multiple pending hydroxymethyl groups was esterified with 2‐bromoisobutyryl bromide to produce the macro‐ATRP initiator [poly(EO‐co‐Gly)_(ATRP). The latter was used to initiate the polymerization of styrene to form the amphiphilic copolymer brushes. The object products and intermediates were characterized with ¹H NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, Fourier transform infrared, and size exclusion chromatography in detail. In all cases, the molecular weight distribution of the copolymer brushes was rather narrow (weight‐average molecular weight/number‐average molecular weight < 1.2), and the linear dependence of ln[M₀]/[M] (where [M₀] is the initial monomer concentration and [M] is the monomer concentration at a certain time) on time demonstrated that the styrene polymerization was well controlled. This method has universal significance for the preparation of copolymer brushes with hydrophilic poly(ethylene oxide) as the main chain. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4361–4371, 2006     

Synthesis of amphiphilic and thermosensitive graft copolymers with fluorescence P(St‐co‐(p‐CMS))‐g‐PNIPAAM by combination of NMP and RAFT methods

A three‐step process, combining nitroxide‐mediated polymerization (NMP) and reversible addition‐fragmentation chain transfer (RAFT) polymerization techniques, for synthesizing well‐defined amphiphilic and thermosensitive graft copolymers with fluorescence poly(styrene‐co‐(p‐chloromethylstyrene))‐g‐poly(N‐isopropylacrylamide) (P(St‐co‐(p‐CMS))‐g‐PNIPAAM), was conducted. Firstly, the NMP of styrene (St) and p‐chloromethylstyrene (p‐CMS) were carried out using benzoyl peroxide (BPO) as the initiator to obtain the random copolymers of P(St‐co‐(p‐CMS)). Secondly, the random copolymers were converted into macro‐RAFT agents with fluorescent carbazole as Z‐group through a simple method. Then the macro‐RAFT agents were used in the RAFT polymerization of N‐isopropylacrylamide (NIPAAM) to prepare fluorescent amphiphilic graft copolymers P(St‐co‐(p‐CMS))‐g‐PNIPAAM with controlled molecular weights and well‐defined structures. The copolymers obtained were characterized by gel permeation chromatography (GPC), ¹H nuclear magnetic resonance (NMR) spectroscopy, and FT‐IR spectroscopy. The size of self‐assembly micelles of the resulting graft copolymers in deionized water was studied by high performance particle sizer (HPPS), the results showed that the Z‐average size of the micelles increased with the increase of molecular weights of PNIPAAM in side chains. The aqueous solution of the micelles prepared from P(St‐co‐(p‐CMS))‐g‐PNIPAAM using a dialysis method showed a lower critical solution temperature (LCST) at ～ 27.5 °C, which was below the value of NIPAAM homopolymer (32 °C). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5318–5328, 2007