Solving the loss of orthogonality during the polyaddition of α‐azide‐ω‐alkyne monomers catalyzed by Cu(PPh3)3Br: Application to the synthesis of high‐molar mass polytriazoles

Polyaddition of an α‐azide‐ω‐alkyne monomer by Cu(PPh₃)₃Br catalyzed 1,3‐dipolar cycloaddition was thoroughly studied as a model system to investigate the orthogonality of this click chemistry process. Indeed, loss of chain‐end functionality and occurrence of side reactions have a tremendous impact on the molar mass of polymers obtained by step growth polymerization. Particularly, SEC, ¹H, and ³¹P NMR experiments have highlighted the occurrence of a Staudinger side‐reaction between azide chain‐ends and PPh₃ from the copper(I) catalyst that dramatically alters M_n of the resulting polytriazoles. A significant enhancement of M_n could be achieved by using an alternative catalyst and optimized experimental conditions, that is, dilution and reaction time. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2470–2476, 2010     

Synthesis and crosslinking behavior of a novel linear polymer bearing 1,2,3‐triazol and benzoxazine groups in the main chain by a step‐growth click‐coupling reaction

The click‐coupling reaction was applied to polycondensation, to synthesize a high‐molecular weight prepolymer having benzoxazine moieties in the main chain. For the polycondensation, a bifunctional N‐propargyl benzoxazine was synthesized from bisphenol A, propargylamine, and formaldehyde. The propargyl group was efficiently used for the copper(I)‐catalyzed alkyne‐azide “click” reaction with p‐xylene‐α,α′‐diazide, to give the corresponding linear polycondensate having 1,2,3‐triazole junctions. The polycondensation proceeded in N,N‐dimethylformamide (DMF) at room temperature. By this highly efficient “click‐” polycondensation reaction, the benzoxazine ring in the monomer was successfully introduced into the polymer main chain without any side reaction. The obtained polymer (=prepolymer) underwent thermal crosslinking to afford the corresponding product, which was insoluble in a wide range of organic solvents and exhibited higher thermal stability than the polymer before crosslinking. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2316–2325, 2008     

Hydroxyl‐ and amine‐terminated hyperbranched polyurethanes using AB2‐type azide monomers: Synthesis,characterization, fluorescence,and charge‐transfer complexation studies

Novel AB₂‐type azide monomers such as 3,5‐bis(4‐methylolphenoxy)carbonyl azide (monomer 1) , 3,5‐bis(methylol)phenyl carbonyl azide (monomer 2) , 4‐(methylol phenoxy) isopthaloyl azide (monomer 3) , and 5‐(methylol) isopthaloyl azide (monomer 4) were synthesized. Melt and solution polymerization of these monomers yielded hydroxyl‐ and amine‐terminated hyperbranched polyurethanes with and without flexible ether groups. The structures of theses polymers were established using FT‐IR and NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 3.2 × 10³ to 5.5 × 10⁴ g/mol depending on the experimental conditions used. The thermal properties of the polymers were evaluated using TGA and DSC: the polymer obtained from monomer ( 1 ) exhibited lowest T_g and highest thermal stability and the polymer obtained from monomer ( 2 ) registered the highest T_g and lowest thermal stability. All the polymers displayed fluorescence maxima in the 425–525 nm range with relatively narrow peak widths indicating that they had pure and intense fluorescence. Also, the polymers formed charge transfer (CT) complexes with electron acceptor molecules such as 7,7,8,8‐tetracyano‐quino‐dimethane (TCNQ) and 1,1,2,2‐tetracyanoethane (TCNE) as evidenced by UV‐visible spectra. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3337–3351, 2009     

Linear poly(amide triazole)s derived from d‐glucose

The click reaction between azides and alkynes is been increasingly employed in the preparation of polymers. In this article, we describe the synthesis and click polyaddition reaction of a new A‐B‐type amide monomer—prepared from d ‐glucose as renewable resource—containing the alkyne and azide functions. Both Cu(I)‐catalyzed and metal‐free click polymerization methods were used to prepare glucose‐derived poly(amide triazole)s. The resulting polymers had weight‐average molecular weights in the 45,000–129,000 range and were characterized by GPC, IR, and NMR spectroscopies. Thermal and X‐ray diffraction studies revealed them to be amorphous. Their qualitative solubilities in various solvents and their water sorption have been studied. The poly(amide triazole)s having the alcohol functions protected as methyl ether were water‐soluble. The presence of the amide functions along the polymer chain made these polytriazoles degradable in the presence of sodium deuteroxide. The degradation was monitored by NMR analysis, and the degradation product was characterized by HRMS. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 629–638     

Functionalized random copolymers from versatile one‐pot click chemistry/ATRP tandems approaches

Two complementary tandem strategies based on the one‐pot combination of click chemistry and atom transfer radical polymerization (ATRP) are studied. Initially, functionalized random copolymers are obtained by copolymerization of methyl methacrylate and propargyl methacrylate simultaneously to the click chemistry coupling of a monofunctional azide. Then, an approach based on the copolymerization of methyl methacrylate and 11‐azido‐undecanoyl methacrylate simultaneously to the click chemistry coupling of a monofunctional alkyne is also investigated. For both the approach, polymerization and click chemistry coupling are catalyzed by CuBr and bipyridine (Bipy) in diphenylether at 90 °C. The [Bipy]/[CuBr] ratio is varied from 2 to 25 and the ratio of functionalized comonomer from 20 to 70 mol %. Both the tandem strategies proceed with good yields (50–80%) and allow a good control over the characteristics of the resulting random copolymers and macromolecular brushes (M_n ～ 15,000–40,000 g/mol and PDI ～ 1.3–2.0) as well as quantitative click functionalization as characterized by ¹H NMR and size exclusion chromatography analyses. Although the click process is generally completed at the early stage of the process, the rate of polymerization depends on the amount of bipyridine involved. It was found that extending most of the polymerization process out of the click reaction regime results in a better control of the polymerization, preventing the significant occurrence of side reactions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3803–3813, 2009     

Thermal and pH‐sensitive gold nanoparticles from H‐shaped block copolymers of (PNIPAM/PDMAEMA)‐b‐PEG‐b‐(PNIPAM/PDMAEMA)

Well‐defined H‐shaped pentablock copolymers composed of poly(N‐isopropylacrylamide) (PNIPAM), poly(N,N‐dimethylaminoethylacrylamide) (PDMAEMA), and poly(ethylene glycol) (PEG) with the chain architecture of (A/B)‐b‐C‐b‐(A/B) were synthesized by the combination of single‐electron‐transfer living radical polymerization, atom‐transfer radical polymerization, and click chemistry. Single‐electron‐transfer living radical polymerization of NIPAM using α,ω azide‐capped PEG macroinitiator resulted in PNIPAM‐b‐PEG‐b‐PNIPAM with azide groups at the block joints. Atom‐transfer radical polymerization of DMAEMA initiated by propargyl 2‐chloropropionate gave out α‐capped alkyne‐PDMAEMA. The H‐shaped copolymers were finally obtained by the click reaction between PNIPAM‐b‐PEG‐b‐PNIPAM and alkyne‐PDMAEMA. These copolymers were used to prepare stable colloidal gold nanoparticles (GNPs) in aqueous solution without any external reducing agent. The formation of GNPs was affected by the length of PDMAEMA block, the feed ratio of the copolymer to HAuCl₄, and the pH value. The surface plasmon absorbance of these obtained GNPs also exhibited pH and thermal dependence because of the existence of PNIAPM and PDAMEMA blocks. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Dual thermo‐ and pH‐sensitive network‐grafted hydrogels formed by macrocrosslinker as drug delivery system

Dual thermo‐ and pH‐sensitive network‐grafted hydrogels made of poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) network and poly(N‐isopropylacrylamide) (PNIPAM) grafting chains were successfully synthesized by the combination of atom transfer radical polymerization (ATRP), reversible addition‐fragmentation chain transfer (RAFT) polymerization, and click chemistry. PNIPAM having two azide groups at one chain end [PNIPAM‐(N₃)₂] was prepared with an azide‐capped ATRP initiator of N,N‐di(β‐azidoethyl) 2‐chloropropionylamide. Alkyne‐pending poly(N,N‐dimethylaminoethyl methacrylate‐co‐propargyl acrylate) [P(DMAEMA‐co‐ProA)] was obtained through RAFT copolymerization using dibenzyltrithiocarbonate as chain transfer agent. The subsequent click reaction led to the formation of the network‐grafted hydrogels. The influences of the chemical composition of P(DMAEMA‐co‐ProA) on the properties of the hydrogels were investigated in terms of morphology and swelling/deswelling kinetics. The dual stimulus‐sensitive hydrogels exhibited fast response, high swelling ratio, and reproducible swelling/deswelling cycles under different temperatures and pH values. The uptake and release of ceftriaxone sodium by these hydrogels showed both thermal and pH dependence, suggesting the feasibility of these hydrogels as thermo‐ and pH‐dependent drug release devices. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

One‐pot preparation of ABA‐type block‐graft copolymers via a combination of “click” chemistry with atom transfer nitroxide radical coupling reaction

A new strategy for the one‐pot preparation of ABA‐type block‐graft copolymers via a combination of Cu‐catalyzed azide‐alkyne cycloaddition (CuAAC) “click” chemistry with atom transfer nitroxide radical coupling (ATNRC) reaction was reported. First, sequential ring‐opening polymerization of 4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl (GTEMPO) and 1‐ethoxyethyl glycidyl ether provided a backbone with pendant TEMPO and ethoxyethyl‐protected hydroxyl groups, the hydroxyl groups could be recovered by hydrolysis and then esterified with 2‐bromoisobutyryl bromide, the bromide groups were converted into azide groups via treatment with NaN₃. Subsequently, bromine‐containing poly(tert‐butyl acrylate) (PtBA‐Br) was synthesized by atom transfer radical polymerization. Alkyne‐containing polystyrene (PS‐alkyne) was prepared by capping polystyryl‐lithium with ethylene oxide and subsequent modification by propargyl bromide. Finally, the CuAAC and ATNRC reaction proceeded simultaneously between backbone and PtBA‐Br, PS‐alkyne. The effects of catalyst systems on one‐pot reaction were discussed. The block‐graft copolymers and intermediates were characterized by size‐exclusion chromatography, ¹H NMR, and FT‐IR in detail. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Photochemical isomerization of norbornadiene‐containing polytriazoles obtained by click chemistry polyaddition

Polyesters and polyethers containing norbornadiene (NBD) and 1,2,3‐triazole units in the main chain are prepared by step growth polymerization of diester or diether NBD‐based dialkynes with different aromatic diazides using copper‐catalyzed azide–alkyne cycloaddition. The solubility and the physical properties of the resulting polytriazoles are investigated by differential scanning calorimetry, thermogravimetric analysis, size exclusion chromatography, and ¹H NMR spectroscopy, and are discussed taking into account of the chemical structures of the monomers. All of them are amorphous with glass transition temperatures ranging from 51 to 117 °C, number average molecular weight (M_n) values from 16 to 43 kDa and thermal degradation (T_d10) values from 175 to 292 °C. The photochemical valence isomerization (PVI) of the NBD units into quadricyclanes (QC) is investigated using UV–vis spectroscopy of polymer films spin‐coated onto quartz substrates. For the first time the PVI of NBD into QC is demonstrated by ¹H NMR spectroscopy. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 223–231     

Precisely controlled copper(0)‐catalyzed one‐pot reaction: Concurrent living radical polymerization and click chemistry

Copper(0)‐catalyzed one‐pot reaction combining living radical polymerization and “click chemistry” was investigated. By precisely tuning reaction time, three novel well‐defined polymers with different degree of carboxyl substitution, poly(propargyl methacrylate) (PPgMA), poly(1‐(4‐carboxyphenyl)‐[1,2,3]triazol‐4‐methyl methacrylate) (PCTMMA), and poly(1‐(4‐carboxyphenyl)‐[1,2,3]triazol‐4‐methyl methacrylate‐co‐propargyl methacrylate) (PCTMMA‐co‐PPgMA) were selectively obtained via Cu(0) powder/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) cocatalyzed LRP and click chemistry. In addition, gel permeation chromatography and ¹H NMR analysis in conjunction with FTIR spectroscopy elucidate that one‐pot process undergoes three steps due to a pronounced rate enhancement of click reaction: (1) generating new monomer, 1‐(4‐carboxyphenyl)‐[1,2,3]triazol‐4‐methyl methacrylate (CTMMA); (2) copolymerization of two monomers (CTMMA and PgMA); (3) building homopolymer PCTMMA. Surprisingly, in contrast to typical Cu(I)‐catalyzed atom transfer radical polymerization (ATRP), copper(0)‐catalyzed one‐pot reaction showed high carboxylic acid group tolerance. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and Characterization of New Phosphorus Containing Sulfonated Polytriazoles for Proton Exchange Membrane Application

Sulfonated polytriazoles have drawn a great attention as high performance polymers and their good film forming ability. In the present study, a phosphorus containing new diazide monomer namely, bis-[4-(4′-aminophenoxy)phenyl]phenylphosphine was synthesized and accordingly, a series of phosphorus containing sulfonated polytriazoles (PTPBSH-XX) was synthesized by reacting equimolar amount of this diazide monomer (PAZ) in combination with another sulfonated diazide monomer (DSAZ) and a terminal bis-alkyne (BPALK) by the Cu (I) catalyzed azide–alkyne click polymerization. The polymers were characterized by nuclear magnetic resonance (¹H, ¹³C, ³¹P NMR) and Fourier transform infrared spectroscopic techniques. The sulfonic acid content of the copolymers also determined from the different integral values obtained from the ¹H NMR signals. The small-angle X-ray scattering results unfolded the well-separated dispersion of the hydrophilic and hydrophobic domains of the polymers. As a whole, the copolymer membranes displayed sufficient thermal, mechanical, and oxidative stabilities high with high proton conductivity and low water uptake that are essential for proton exchange membrane applications. The copolymers exhibited oxidative stability in the range of 15–24 h and had proton conductivity values were found as high as 38–110 mS cm⁻¹ at 80 °C in completely hydrated condition. Among the all copolytriazoles, PTPBSH-90 (BPALK:DSAZ:PAZ = 100:90:10) having IEC_W = 2.44 mequiv g⁻¹, showed proton conductivity as high as 119 mS cm⁻¹ at 90 °C with an activation energy of 10.40 kJ mol⁻¹ for the proton conduction. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 263–279     

Synthesis of end‐functionalized polyethers by phosphazene base‐catalyzed ring‐opening polymerization of 1,2‐butylene oxide and glycidyl ether

For the living ring‐opening polymerization (ROP) of epoxy monomers, the catalytic activity of organic superbases, tert‐butylimino‐tris(dimethylamino)phosphorane, 1‐tert‐butyl‐2,2,4,4,4‐pentakis(dimethylamino)‐2Λ⁵,4Λ⁵‐catenadi(phosphazene), 2,8,9‐triisobutyl‐2,5,8,9‐tetraaza‐1‐phosphabicyclo[3.3.3]undecane, and 1‐tert‐butyl‐4,4,4‐tris(dimethylamino)‐2,2‐bis[tris(dimethylamino)phosphoranylidenamino]‐2Λ⁵,4Λ⁵‐catenadi(phosphazene) (t‐Bu‐P₄), was confirmed. Among these superbases, only t‐Bu‐P₄ showed catalytic activity for the ROP of 1,2‐butylene oxide (BO) to afford poly(1,2‐butylene oxide) (PBO) with predicted molecular weight and narrow molecular weight distribution. The results of the kinetic, post‐polymerization experiments, and MALDI‐TOF MS measurement revealed that the t‐Bu‐P₄‐catalyzed ROP of BO proceeded in a living manner in which the alcohol acted as the initiator. This alcohol/t‐Bu‐P₄ system was applicable to the glycidol derivatives, such as benzyl glycidyl ether (BnGE) and t‐butyl glycidyl ether, to afford well‐defined protected polyglycidols. The α‐functionalized polyethers could be obtained using different functionalized initiators, such as 4‐vinylbenzyl alcohol, 5‐hexen‐1‐ol, and 6‐azide‐1‐hexanol. In addition, the well‐defined cyclic‐PBO and PBnGE were successfully synthesized using the combination of t‐Bu‐P₄‐catalyzed ROP and click cyclization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Visible light‐induced thiol‐ene reaction: A new strategy to prepare Α,ω‐dithiol and Α,ω‐divinyl telechelic polythiolether oligomers

A new strategy is developed to prepare both α,ω‐dithiol and α,ω‐divinyl linear telechelic polythiolether oligomers by visible light induced thiol‐ene chemistry in the presence of a fac‐Ir(ppy)₃ photoredox catalyst. Polythiolether oligomers of well‐defined end groups and controlled molecular weights have been successfully synthesized at varying monomer molar ratios of 1,4‐benzenedimethanethiol (BDMT) to diethylene glycol divinyl ether (DEGVE). ¹H NMR and MALDI‐TOF MS analyses demonstrate that as‐prepared polythiolethers possess high end‐group fidelity, which is further supported by the successful polyaddition of polythiolethers bearing α,ω‐dithiol and α,ω‐divinyl groups. For example, with the α,ω‐dithiol‐ (M_n = 1900 g mol^?1, PDI = 1.25) and α,ω‐divinyl‐terminated (M_n = 2000 g mol^?1, PDI = 1.29) polythiolethers as macromonomers, the molecular weight of resulting polythiolether is up to 7700 g mol^?1 with PDI as 1.67. The reactivity of the terminal thiol group is further confirmed by the addition reaction with N‐(1‐pyrenyl)maleimide. UV‐vis spectra and fluorescene measurements suggest that fac‐Ir(ppy)₃ undergo a redox quenching process reacted with BDMT to generate thiyl free radicals. With these results, the mechanism of the thiol‐ene reaction catalyzed by photoredox catalyst is proposed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 740–749     

Synthesis of head‐to‐tail polyurethanes from nonsymmetric diisocyanate and ethylene glycol with organotin catalysts

An ordered head‐to‐tail (HT) polyurethane was successfully prepared by the polyaddition reaction of p‐isocyanatobenzyl isocyanate with ethylene glycol with dibutyltin dilaurate as a catalyst. Furthermore, the HT regularity of polyurethane was improved to 83% with 1,1,3,3‐tetraphenyl‐1,3‐dichlorodistannoxane. The polymerization was conducted in N,N‐dimethylformamide at 30 °C with both monomers mixed at once. The microstructure of the polymer was investigated by ¹H and ¹³C NMR spectroscopy, and the polymer obtained by the polyaddition reaction had the expected HT linkages. The constitutional regularity of the polymers influenced the thermal properties and crystallinity. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 416–429, 2001     

One‐pot synthesis of precise polyisoxazoles by click polymerization: Copper (I)‐catalyzed 1,3‐dipolar cycloaddition of nitrile oxides with alkynes

This article reports a new one‐pot method for polymer preparation, which involves double click chemistry. In one pot, two click reactions take place sequentially by adding the reactants step by step. The first click reaction is to produce the monomer for the second click reaction for polymerization. The click polymerization differs from the general click polymerization with the reaction of diazides and dialkynes. Nitrile oxides, produced in situ by the first click reaction of the formation of aldoxime, instead azides, avoiding the poisonousness and explosiveness of azides and being much safer and easy to operate. And 3,5‐disubstitute polyisoxazoles are produced by the copper(I)‐catalyzed the 1,3‐dipolar cycloaddition of nitrile oxides with alkynes in high yields by our one‐pot method. The resulting polyisoxazoles agree well with the structural assignment obtained by the ¹H NMR and IR analyses, with high molecular weights, narrow molecular weight distribution (M_w/M_n < 1.2) and high regioregularity. The poor solubility of these polymers is found to be caused by their crystallization. Improvement of solubility is achieved by modifying the structures of alkyne monomers. All the polymers are thermally stable, losing little of their weights when heated to ～350 °C. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Well‐controlled ATRP of 2‐(2‐(2‐azidoethyoxy)ethoxy)ethyl methacrylate for high‐density click functionalization of polymers and metallic substrates

The combination of atom transfer radical polymerization (ATRP) and click chemistry has created unprecedented opportunities for controlled syntheses of functional polymers. ATRP of azido‐bearing methacrylate monomers (e.g., 2‐(2‐(2‐azidoethyoxy)ethoxy)ethyl methacrylate, AzTEGMA), however, proceeded with poor control at commonly adopted temperature of 50 °C, resulting in significant side reactions. By lowering reaction temperature and monomer concentrations, well‐defined pAzTEGMA with significantly reduced polydispersity were prepared within a reasonable timeframe. Upon subsequent functionalization of the side chains of pAzTEGMA via Cu(I)‐catalyzed azide‐alkyne cycloaddition (CuAAC) click chemistry, functional polymers with number‐average molecular weights (M_n) up to 22 kDa with narrow polydispersity (PDI < 1.30) were obtained. Applying the optimized polymerization condition, we also grafted pAzTEGMA brushes from Ti6Al4 substrates by surface‐initiated ATRP (SI‐ATRP), and effectively functionalized the azide‐terminated side chains with hydrophobic and hydrophilic alkynes by CuAAC. The well‐controlled ATRP of azido‐bearing methacrylates and subsequent facile high‐density functionalization of the side chains of the polymethacrylates via CuAAC offers a useful tool for engineering functional polymers or surfaces for diverse applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1268–1277     

Precision synthesis of sustainable thermoplastic elastomers from lysine‐derived monomers

Novel renewable thermoplastic elastomers were synthesized by sequential polymerization of lysine‐ and itaconic acid‐derived monomers. Ring‐opening polymerization of lysine‐based O‐carboxyanhydride monomer using diethylene glycol as an initiator gave well‐defined α,ω‐dihydroxy functionalized lysine‐derived polyesters. The M _n of these polyesters increased with the monomer conversion while retaining relatively narrow molecular weight distributions. Based on the successful controlled polymerization and esterification of α,ω‐dihydroxy with 2‐bromoisobutyryl bromide, the resultant Br‐PL‐Br macroinitiator was used for the atom transfer radical polymerization of N‐phenylitaconimide (PhII). Three poly(N‐phenylitaconimide)‐b‐polyester‐b‐poly(N‐phenylitaconimide) triblock copolymers were prepared containing 12 ? 25 mol% PPhII, as determined by ¹H NMR spectroscopy. The properties of the obtained triblock copolymer are evaluated as high‐performance and renewable thermoplastic elastomer materials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 349–355     

Metal‐ and solvent‐free,clickable synthesis and postpolymerization functionalization of poly(triazole)s

In this study, a series of linear poly(triazole)s (PTAs) were successfully synthesized by the metal‐ and solvent‐free, thermal click polymerization of diazide and dialkyne (A₂ + B₂) monomers. All click polymerizations proceeded smoothly at 80 °C in an open atmosphere without protection from oxygen and moisture. After being polymerized for 36 h, the crude polymer was further fractionated into three fractions using a multistep precipitation method. By selectively choosing precipitating agents, this process produced poly(triazole) fractions with low polydispersity index (<1.30). The resulting PTAs are soluble in common organic solvents and stable at a temperature up to 320 °C. Furthermore, the methyl benzoate moieties in the main chain can serve as useful building blocks for further postpolymerization functionalization, yielding 1,2,4‐triazole derivatives. This functionalization strategy offers potential for the development of novel triazole‐based materials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of 4μ‐PS2PEO2, 4μ‐PS2PCL2, 4μ‐PI2PEO2, and 4μ‐PI2PCL2 star‐shaped copolymers by the combination of glaser coupling with living anionic polymerization and ring‐opening polymerization

4μ‐A₂B₂ star‐shaped copolymers contained polystyrene (PS), poly(isoprene) (PI), poly(ethylene oxide) (PEO) or poly(ε‐caprolactone) (PCL) arms were synthesized by a combination of Glaser coupling with living anionic polymerization (LAP) and ring‐opening polymerization (ROP). Firstly, the functionalized PS or PI with an alkyne group and a protected hydroxyl group at the same end were synthesized by LAP and then modified by propargyl bromide. Subsequently, the macro‐initiator PS or PI with two active hydroxyl groups at the junction point were synthesized by Glaser coupling in the presence of pyridine/CuBr/N,N,N ′,N ″,N ″‐penta‐methyl diethylenetri‐amine (PMDETA) system and followed by hydrolysis of protected hydroxyl groups. Finally, the ROP of EO and ε‐CL monomers was carried out using diphenylmethyl potassium (DPMK) and tin(II)‐bis(2‐ethylhexanoate) (Sn(Oct)₂) as catalyst for target star‐shaped copolymers, respectively. These copolymers and their intermediates were well characterized by SEC, ¹H NMR, MALDI‐TOF mass spectra and FT‐IR in details. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of ABCD 4‐Miktoarm star‐shaped quarterpolymers by combination of the “click” chemistry with multiple polymerization mechanism

Well‐defined ABCD 4‐Miktoarm star‐shaped quarterpolymers of [poly(styrene)‐poly(tert‐butyl acrylate)‐poly(ethylene oxide)‐poly(isoprene)] [star(PS‐PtBA‐PEO‐PI)] were successfully synthesized by the combination of the “click” chemistry and multiple polymerization mechanism. First, the poly(styryl)lithium (PS^?Li⁺) and the poly(isoprene)lithium (PI^?Li⁺) were capped by ethoxyethyl glycidyl ether (EEGE) to form the PS and PI with both an active ω‐hydroxyl group and an ω′‐ethoxyethyl‐protected hydroxyl group, respectively. After these two hydroxyl groups were selectively modified to propargyl and 2‐bromoisobutyryl group for PS, the resulted PS was used as macroinitiator for ATRP of tBA monomer and the diblock copolymer PS‐b‐PtBA with a propargyl group at the junction point was achieved. Then, using the functionalized PI as macroinitiator for ROP of EO monomer and bromoethane as blocking agent, the diblock copolymer PI‐b‐PEO with a protected hydroxyl group at the conjunction point was synthesized. After the hydrolysis, the recovered hydroxyl group of PI‐b‐PEO was modified to bromoacetyl and then azide group successively. Finally, the “click” chemistry between them was proceeded smoothly. The obtained star‐shaped quarterpolymers and intermediates were characterized by ¹H NMR, FT‐IR, and SEC in detail. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2154–2166, 2008