High performance benzoxazine monomers and polymers containing furan groups

Furan‐containing benzoxazine monomers, 3‐furfuryl‐3,4‐dihydro‐2H‐1,3‐benzoxazine (P‐FBz) and bis(3‐furfuryl‐3,4‐dihydro‐2H‐1,3‐benzoxazinyl)isopropane (BPA‐FBz), were prepared using furfurylamine as a raw material. The chemical structures of P‐FBz and BPA‐FBz were characterized with FTIR, ¹H NMR, elemental analysis, and mass spectrometry. Formation of furfurylamine Mannich bridge networks in the polymerizations of P‐FBz and BPA‐FBz increased the cross‐linking densities and thermal stability of the resulting polybenzoxazines. P‐FBz‐ and BPA‐FBz‐based polymers also exhibited high glass transition temperatures above 300 °C, high char yields, and low flammability with limited oxygen index values of 31. The dielectric (D_k = 3.21–3.39) and mechanical properties (high storage modulus of 3.0–3.9 GPa and low coefficient of thermal expansion of 37.7–45.4 ppm) of the P‐FBz‐ and BPA‐FBz‐based polymers were superior or comparable to other polybenzoxazines. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5267–5282, 2005     

Preparation,characterization, and properties of fluorene‐containing benzoxazine and its corresponding cross‐linked polymer

A benzoxazine compound (FDP‐FBz), which possesses a fluorene group and two terminal furan groups, and its corresponding cross‐linked polymer (CR‐FDP‐FBz) have been prepared using 4,4′‐(9‐fluorenylidene)diphenol (FDP), furfurylamine, and formaldehyde as precursors. The chemical structure of FDP‐FBz has been characterized with Fourier‐transform infrared and ¹H nuclear magnetic resonance spectroscopies. FDP‐FBz displays a melting point at about 173 °C and a processing window of 52 °C as well as good solubility in common organic solvents. As a result, FDP‐FBz can be fabricated in both molten and solution processes. Under an excitation at 365 nm, FDP‐FBz exhibits a photoluminescent (PL) emission at about 445 nm. The PL intensity of FDP‐FBz is as high as sixfolds of the intensity recorded with FDP. CR‐FDP‐FBz displays a glass transition temperature of 215 °C, a high storage modulus of 3.1 GPa, a 10% weight loss at 384 °C, and a high char yield of 56 wt % (900 °C, in nitrogen). Moreover, CR‐FDP‐FBz has a high refractive index of about 1.65 as a result of incorporating fluorene groups to its structure. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4020–4026, 2010     

Synthesis of polybenzoxazine/clay nanocomposites by in situ thermal ring‐opening polymerization using intercalated monomer

A new class of polybenzoxazine/montmorillonite (PBz/MMT) nanocomposites has been prepared by the in situ polymerization of the typical fluid benzoxazine monomer, 3‐pentyl‐5‐ol‐3,4‐dihydro‐1,3‐benzoxazine, with intercalated benzoxazine MMT clay. A pyridine‐substituted benzoxazine was first synthesized and quaternized by 11‐bromo‐1‐undecanol and then used for ion exchange reaction with sodium ions in MMT to obtain intercalated benzoxazine clay. Finally, this organomodified clay was dispersed in the fluid benzoxazine monomers at different loading degrees to conduct the in situ thermal ring‐opening polymerization. Polymerization through the interlayer galleries of the clay led to the PBz/MMT nanocomposite formation. The morphologies of the nanocomposites were investigated by both X‐ray diffraction and transmission electron microscopic techniques, which suggested the partially exfoliated/intercalated structures in the PBz matrix. Results of thermogravimetric analysis confirmed that the thermal stability and char yield of PBz nanocomposites increased with the increase of clay content. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Thermally curable polyvinylchloride via click chemistry

Novel side‐chain benzoxazine functional polyvinylchloride (PVC‐Benzoxazine) was synthesized by using “Click Chemistry” strategy. First, approximately 10% of chloro groups of PVC were converted to azido groups by using NaN₃ in N,N‐dimethylformamide. Propargyl benzoxazine was prepared independently by a ring closure reaction between p‐propargyloxy aniline, paraformaldehyde, and phenol. Finally, azidofunctionalized PVC was coupled to propargyl benzoxazine with high efficiency by click chemistry. The spectral and thermal analysis confirmed the presence of benzoxazine functionality in the resulting polymer. It is shown that PVC containing benzoxazine undergoes thermally activated curing in the absence of any catalyst forming PVC thermoset with high thermal stability. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3512–3518, 2008     

Synthesis and crosslinking behavior of a novel linear polymer bearing 1,2,3‐triazol and benzoxazine groups in the main chain by a step‐growth click‐coupling reaction

The click‐coupling reaction was applied to polycondensation, to synthesize a high‐molecular weight prepolymer having benzoxazine moieties in the main chain. For the polycondensation, a bifunctional N‐propargyl benzoxazine was synthesized from bisphenol A, propargylamine, and formaldehyde. The propargyl group was efficiently used for the copper(I)‐catalyzed alkyne‐azide “click” reaction with p‐xylene‐α,α′‐diazide, to give the corresponding linear polycondensate having 1,2,3‐triazole junctions. The polycondensation proceeded in N,N‐dimethylformamide (DMF) at room temperature. By this highly efficient “click‐” polycondensation reaction, the benzoxazine ring in the monomer was successfully introduced into the polymer main chain without any side reaction. The obtained polymer (=prepolymer) underwent thermal crosslinking to afford the corresponding product, which was insoluble in a wide range of organic solvents and exhibited higher thermal stability than the polymer before crosslinking. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2316–2325, 2008     

Carboxylic acid‐containing benzoxazines as efficient catalysts in the thermal polymerization of benzoxazines

The autocatalytic thermal polymerization behavior of three benzoxazine monomers containing carboxylic acid functionalities is reported. Several mixtures of these carboxylic monomers and 3‐phenyl‐3,4‐dihydro‐2H‐1,3‐benzoxazine were prepared and their thermal polymerization behavior was analyzed by differential scanning calorimetry. The acid character of these reactive monomers increases the concentration of oxonium species, thus catalyzing the benzoxazine ring opening reaction. In this way the polymerization temperature decreased by as much as 100 °C in some cases. The existence of decarboxylation processes at high temperatures has been established by FTIR‐ATR and related to the increase in thermal stability observed by TGA in some cases. A relationship between the presence of carboxylic groups in the resulting materials and their flame retardancy behavior has also been established. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6091–6101, 2008     

Studies on the thermal polymerization of substituted benzoxazine monomers: Electronic effects

To evaluate the influence of the electronic effects on the polymerization temperature, we looked at several 3‐phenyl‐3,4‐dihydro‐2‐H‐1,3‐benzoxazine monomers with electron‐withdrawing or electron‐donating groups in the 6 and 4′ positions. The monomers were synthesized and characterized using different synthetic methods to achieve the best possible results. The thermal polymerization of these benzoxazine monomers was analyzed by differential scanning calorimetry, and the polymerization behavior and the polymer characteristics were related to the electronic character of the substituent and the polymerization mechanism. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3353–3366, 2008     

Synthesis of a benzoxazine with precisely two phenolic OH linkages and the properties of its high‐performance copolymers

A phenolic OH‐containing benzoxazine ( F‐ap ), which cannot be directly synthesized from the condensation of bisphenol F, aminophenol, and formaldehyde by traditional procedures, has been successfully prepared in our alternative synthetic approach. F‐ap was prepared by three steps including (a) condensation of 4‐aminophenol and 5,5'‐methylenebis(2‐hydroxybenzaldehyde) (1) , (b) reduction of the resulting imine linkage by sodium borohydride, and (c) ring closure condensation by formaldehyde. The key starting material, (1) , was prepared from 2‐hydroxybenzaldehyde and s‐trioxane in the presence of sulfuric acid. F‐ap is structurally similar to bis(3,4‐dihydro‐2H‐3‐phenyl‐1,3‐benzoxazinyl)methane ( F‐a, a commercial benzoxazine based on bisphenol F/aniline/formaldehyde) except for two phenolic OHs. The phenolic OHs can provide reaction sites with epoxy and 1,1'‐(methylenedi‐p‐phenylene)bismaleimide (BMI). The structure–property relationships between the thermosets of F‐ap /epoxy, F‐a /epoxy, F‐ap /BMI, and F‐a /BMI were discussed. Experimental data showed that thermosets based on F‐ap /epoxy and F‐ap /BMI provided much better thermal properties than those based on F‐a /epoxy and F‐a /BMI. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2686–2694     

Polyaddition of bifunctional 1,3‐benzoxazine and 2‐methylresorcinol

A polyaddition system consisted of a bifunctional N‐n‐propyl benzoxazine and 2‐methylresorcinol ( MR ) that proceeds at ambient temperature has been developed. In this system, the aromatic ring of MR acted as a bifunctional monomer, reacting with a two equivalent amount of benzoxazine moieties via their ring‐opening reaction. The polyaddition gave the corresponding linear polymer bearing phenolic moieties bridged by Mannich‐type linkage in the main chain. The linear polymer had a high glass transition temperature, which was comparable to that of the linear polybenzoxazine synthesized by the ring‐opening polymerization of a monofunctional N‐n‐propyl benzoxazine. The employment of a bifunctional N‐allyl benzoxazine in the polyaddition system resulted in the formation of the corresponding polymer with allyl pendants, which exhibited improved heat resistance due to its thermally induced crosslinking reaction. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3867–3872     

Synthesis and characterization of nanomagnetite thermosets based on benzoxazines

Nanomagnetite thermosets were obtained by thermally activated ring opening copolymerization of benzoxazine groups coated on the surface of the nanomagnetite with bare benzoxazine. For this purpose, carboxylic acid containing 1,3‐benzoxazine was synthesized and covalently bonded on magnetite nanoparticles by postcoating method. The average size of benzoxazine coated nanoparticles was 40–100 nm as determined by Dynamic Light Scattering (DLS), Atomic Force Microscopy (AFM) and Transmission Electron Microscopy (TEM) measurements. The crystal structure of benzoxazine coated nanoparticles was shown to be magnetite by X‐ray diffraction (XRD) analysis. Thermally activated curing behavior of nanomagnetite‐benzoxazines has also been studied by differential scanning calorimetry (DSC). Magnetic and thermal properties of the cured samples were investigated. It was shown that the precursor nanomagnetite benzoxazine and cured samples exhibited typical ferromagnetic character with low coercivities between 1.5 and 2.5 Oe. The cured samples showed high thermal stability. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6780–6788, 2008     

Self‐healing of poly(propylene oxide)‐polybenzoxazine thermosets by photoinduced coumarine dimerization

In this work, a self‐healing strategy for poly(propylene oxide)s bearing coumarine‐benzoxazine units (PPO‐CouBenz)s based on light induced coumarine dimerization reactions is described. Four different types of poly(propylene oxide) amines with molecular weights ranging from 440 to 5000 Da were reacted with formaldehyde and 4‐methyl‐7‐hydroxycoumarin to yield desired (PPO‐CouBenz)s. The crosslinked polymer films were prepared by solvent casting of various compositions of PPO‐CouBenzs in chloroform followed by thermal ring opening reaction of benzoxazine groups at 210–240 °C. Thermal curing and thermal stability of the initial PPOs and final products were investigated. Using allyl benzoxazine in the formulation, it was demonstrated that the toughness of the films was improved. Photoinduced healing of coumarin‐based cured PPO‐CouBenz polymer films was investigated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2911–2918     

Diethylphosphonate‐containing benzoxazine compound as a thermally latent catalyst and a reactive property modifier for polybenzoxazine‐based resins

A diethylphosphonate‐containing benzoxazine compound (DEP‐Bz) to be used as a multi‐functional reaction agent for preparation of high performance polybenzoxazine thermosetting resins has been reported. The chemical structure of DEP‐Bz has been characterized with FTIR, ¹H NMR, and elemental analysis. The phosphonate groups of DEP‐Bz could convert into phosphonic acid groups which could catalyze the ring‐opening addition reaction of benzoxazines, to demonstrate the thermally latent catalytic effect of DEP‐Bz on the polymerization of benzoxazine compounds. Moreover, DEP‐Bz could also serve as a reactive‐type modifier for polybenzoxazines and other thermosets. DEP‐Bz modified polybenzoxazine resins have shown relatively low reaction temperature (about 190 °C), high mechanical strength with a storage modulus of about 3.0 GPa, and high flame retardancy with a limit oxygen index of about 32. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3523–3530     

Synthesis and crosslinking reaction of a novel polymer containing benzoxazine and phenyleneethynylene moieties in the main chain

A novel polymer, poly( 1 ) containing benzoxazine and phenyleneethynylene moieties in the main chain with number‐average molecular weights ranging from 1400 to 9800 was obtained quantitatively by the Sonogashira–Hagihara coupling polymerization of the corresponding iodophenyl‐ and ethynylphenyl‐substituted monomer 1 . Poly( 1 ) was heated at 200 °C under N₂ for 2 h to obtain the cured polymer, poly( 1 )′ via the ring‐opening polymerization of the benzoxazine moieties. The structures of the polymer before and after curing were confirmed by ¹H‐NMR, IR, and UV–vis absorption and reflectance spectroscopies. Poly( 1 )′ was thermally more stable than monomer 1 and poly( 1 ). A specimen was prepared from a mixture of poly( 1 ) and phenol‐diaminodiphenylmethane type benzoxazine 2 by heating at 200 °C for 2 h under N₂. The poly( 1 )/ 2 resin was thermally stable than bisphenol‐A type benzoxazine resin 3 . Poly( 1 ) exhibited XRD peaks corresponding to the d‐spacings of 1.26–0.98 and 0.40 nm, assignable to the repeating monomer unit and alignment of polymer molecules, respectively. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2581–2589     

Functionalized poly(phenylene‐alt‐bithiophenes): Synthesis,chiroptical properties,and interaction with chiral amines

New functionalized, (a)chiral poly(phenylene‐alt‐bithiophene)s were prepared and their chiroptical properties were studied. The polymers were prepared by a Stille coupling reaction and were functionalized with protected carboxylic acid and amino functions (tert‐butyl ester and BOC respectively). The polymers are present as well conjugated rigid rods in solution, which (chirally) aggregate in nonsolvents and film. In a next step, the protecting group (tert‐butyl ester in case of the carboxylic acid) was removed. Aggregation of this polymer can be induced by addition of amines; if chiral amines are used, the polymer chains chirally stack. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4817–4829, 2008     

Tuning the optical properties of hyperbranched polymers through the modification of the end groups

Dye‐capped, hyperbranched, conjugated polymers were prepared by the modification of the peripheral bromo end groups of the hyperbranched polymer core with a palladium‐catalyzed Suzuki–Miyaura cross‐coupling reaction. The dye‐modified, hyperbranched polymers had high molecular weights and displayed good solubility in common organic solvents such as tetrahydrofuran, toluene, and chloroform. The structure of the dye‐modified, hyperbranched polymers was characterized by ¹H and ¹³C NMR and elemental analysis. The thermal properties of five kinds of hyperbranched polymers were investigated with thermogravimetric analysis and differential scanning calorimetry. The optical properties of the dye‐capped, hyperbranched polymers were investigated with ultraviolet‐absorption and fluorescence spectroscopy. The hyperbranched structure could effectively reduce the aggregation of the peripheral dyes. The emission colors of the hyperbranched polymers could be easily tuned by end‐group modification. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 111–124, 2007     

A new chemical modification of liquid polybutadienes: Radical addition of aliphatic aldehydes onto pending vinyl groups

A new chemical modification of liquid polybutadiene by radical addition of model aldehydes (butanal and hexanal) onto pending vinyls of the polymer is described. The dibenzoyl peroxide/N,N‐dimethylaniline redox system was shown to initiate the hydroacylation more efficiently than the thermal decomposition of 2,2′‐azobis(2‐methylpropanenitrile) because it gives higher conversions (content of hydroacylated monomer units, as determined by NMR) without forming crosslinks or microgels. Typically, the former source of radicals gives the content of modified units as high as 13% related to all monomer units, while the latter only 2–6%. Repeated introduction of the redox system into the reaction mixture resulted in an increased content of the acyl groups. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3919–3925, 2008     

Thermally latent reaction of hemiacetal ester with epoxide catalyzed by recyclable polymeric catalyst consisting of salen‐zinc complex and polyurethane main chain

This article describes the synthesis of and catalysis with a polymeric catalyst (Zn/ 1_NHCOO ) carrying salen‐zinc complex structure in the main chain prepared from polyaddition of zinc/bis(4‐hydroxy)salicylidene‐1,2‐diiminoethane and 4,4′‐diphenylmethane diisocyanate. Poly(Zn/ 1_NHCOO ) promoted the reaction of glycidyl phenyl ether (2) with 1‐propoxyethyl‐2‐ethylhexanoate (3) only at moderately elevated temperatures. Poly(Zn/ 1_NHCOO ) can be recycled by simple filtration from the reaction mixtures, and the recycled polymer is as active as the freshly prepared one. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3673–3681, 2008     

Preparation of a Porous polymer by a catalyst‐free diels‐alder reaction and its structural modification by post‐reaction

A microporous polymer is prepared by a catalyst‐free Diels–Alder reaction. A cyclopentadiene with both a diene and a dienophile functionality and a dienophilic maleimide are used for the Diels–Alder reaction. 1,3,5‐Tris(bromomethyl)‐2,4,6‐trimethylbenzene is reacted with sodium cyclopentadienide to produce the multicyclopentadiene‐functionalized monomer. A crosslinked polymer ( CDAP ) is obtained by the reaction of the cyclopentadiene monomer with N,N′‐1,4‐phenylenedimaleimide. The thermal dissociation of the cyclopentadiene dimeric unit and the subsequent Diels–Alder reaction with the maleimide group are investigated by the model reaction. We are able to restructure the crosslinked polymer network by taking advantage of the thermal reversibility of the Diels–Alder linkage. After the post thermal treatment, the BET surface area of the polymer ( CDAP‐T ) is greatly increased from 317 to 1038 m² g^?1. CDAP‐T is functionalized with pyrene by bromination with N‐bromosuccinimide and the subsequent substitution reaction with aminopyrene. The adsorption property of the pyrene‐functionalized polymer for an aromatic dye is investigated using malachite green. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3646–3653     

Photophysical behavior of block copolymers containing EDOT,thiophene, and benzodiathiazole units linked to fluorene

The spectral properties of two block copolymers were investigated, based on the fluorene‐EDOT (FEDOT) segment linked either to fluorene‐thiophene (FTh) or to fluorene‐benzothiadiazole (FBz) units, in an alternated fashion. Experimental data revealed that in the first material, each block keeps the spectral absorption region observed in the individual copolymers, while in the other structure new spectral characteristics were observed, as compared with each individual segment. In order to elucidate this behavior, theoretical calculations using density functional theory methods were performed. The block copolymers were reduced to a minimal representative model and the following structures were modeled: (FEDOT)₂, (FBz)₂ e (FTh)₂ relative to the alternated segments and (FEDOT)₂‐(FBz)₂ and (FEDOT)₂‐(FTh)₂ as miniblocks for the block copolymers. The theoretical results showed good agreement with experimental data and used to interpret the differences in electronic behavior of the block copolymers and their correlation with the observed photophysical behavior. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 908–915     

Structures and photoactive properties of poly(styrene‐co‐vinylbenzophenone)

Poly(styrene‐co‐vinylbenzophenone) prepared by a graft reaction on polystyrene revealed photoactive properties under irradiation of UVA. The photoactive structural features of the polymer were examined via electron paramagnetic resonance (EPR) under irradiation of UVA and fluorescent light. The photoactive functions of the polymer such as antimicrobial performance and dye decolorization ability were investigated. The results revealed that the poly(styrene‐co‐vinylbenzophenone) could generate radicals under fluorescent and UVA irradiation, and some radicals could stay alive for about 30 min in a dark chamber. The photoexcited polymer showed excellent antibacterial ability and decolorization effect on methylene blue and methyl orange dye under both daylight and UVA light. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2423–2430, 2008