Restraining the aggregation of photoluminescent 1‐pyrenecarboxylic acid by hydrogen bonding to poly(methyl methacrylate)

Hydrogen bonds between the carboxylic acid in photoluminescent 1‐pyrenecarboxylic acid (PCA) and the ester carbonyl group in poly(methyl methacrylate) (PMMA) can be used to restrain the aggregation of the fluorescent PCA molecules and to enhance the emission efficiency of the resulting PMMA/PCA films. Primarily, PCA is added to PMMA in THF (or in toluene) to make homogeneous mother solutions for the further preparation of solid PMMA/PCA films. The concentration and chain conformation of PMMA in the mother solution are crucial to controlling the dispersion of PCAs in solution and, therefore, the extent of aggregation in the so‐derived films. The results from solution emissions suggest that PCAs in dilute solutions are easy to disperse, and less PMMA is required for the effective exclusion of aggregation in comparison with PCAs in concentrated solutions. In addition, the solvents THF and toluene play different roles in the arrangement of the PMMA chains and the emission behavior of the incorporated PCA in the dilute and semidilute regimes. With appropriate solution preparation conditions, the resulting films have photoluminescence quantum efficiencies ranging from 0.83 to 0.93, and the best value of 0.93 has been obtained from a film containing a small PCA content of 0.24 wt %. This result indicates that the fluorophore arrangements, rather than the content, govern the final emission efficiency. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 920–929, 2007     

Fabrication of well‐developed nano‐ribbons composed of hierarchically grown isotactic poly(methyl methacrylate) crystals on substrates

Well‐developed nano‐ribbons composed of isotactic poly(methyl methacrylate) (it‐PMMA) were successfully fabricated on mica via a simple solution‐casting method. Typical morphologies with about 0.6 nm thickness and 30–40 nm widths, thermal stability, and alternative structural analyses suggested that nano‐ribbons were composed of two‐dimensional folded chain crystals of it‐PMMA. Typically, nano‐ribbons were developed by incubating tetrahydrofuran (THF) solutions at 20 °C for at least 2 months, more than equi‐amounts of water were added to incubated THF solutions, and solutions were cast onto mica. It was found that, after the aforementioned incubation of THF solutions, it‐PMMA chains adopted trans‐trans (tt) conformations, which are precursors for it‐PMMA crystals, suggesting that THF is a unique solvent for it‐PMMA. By adding water, a poor solvent for it‐PMMA, to THF solutions, it‐PMMA aggregates formed with several hundreds of nanometer sizes, further promoting an increase in the population of the tt conformation. Nano‐ribbons were similarly formed on silicon wafer substrates, suggesting that hydrophilic substrates were essential for the formation of nano‐ribbons. Interestingly, a modulation of the above described method, with the slight evaporation of THF from a THF/water solution before casting onto mica, succeeded in the development of epitaxially adsorbed nano‐ribbons. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3098–3110, 2009     

Ruptured conjugated polymer thin films formed during spin coating

The formation of ruptured poly[2‐methoxy‐5‐(2′‐ethyl‐hexyloxy)‐1,4‐phenyl vinylene] (MEH–PPV) thin films coated from undried tetrahydrofuran (THF) solutions was investigated. Because of the incompatibility of water and MEH–PPV, the polymer films coated from THF/water solutions showed a ruptured film structure. In the photoluminescence (PL) spectra of the polymer thin films, the ruptured polymer films showed a redshifted emission in comparison with continuous polymer thin films. According to a comparison of the PL spectra of polymer solutions and films, MEH–PPV in THF showed a coil–cylinder transition during precipitation from solution. Because of the incompatibility of water and MEH–PPV, an increase in the water content could increase the ratio of polymer chains in the cylinder conformation, resulting in a redshifted emission for the films. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 79–84, 2006     

Full color light‐emitting electrospun nanofibers prepared from PFO/MEH‐PPV/PMMA ternary blends

In this study, luminescence electrospun (ES) nanofibers based on ternary blends of poly(9,9‐dioctylfluoreny‐2,7‐diyl) (PFO)/poly[2‐methoxy‐5‐(2‐ethylhexyloxy)‐1,4‐phenylenevinylene] (MEH‐PPV)/poly(methyl methacrylate) (PMMA) were prepared from chloroform solutions using a single capillary spinneret. Effects of PFO/MEH‐PPV ratio on the morphology and photophysical properties were studied while the PMMA weight percentage was fixed at 90 wt %. The morphologies of the prepared ES fibers were characterized by FE‐SEM and fluorescence microscopy. The obtained fibers had diameters around a few hundred nm and pore sizes in the range of 30–35 nm. The emission colors of the PFO/MEH‐PPV/PMMA blend ES fibers changed from blue, white, yellowish‐green, greenish‐yellow, orange, to yellow, as the MEH‐PPV composition increased. In contrast, the emission colors of the corresponding spin‐coated films were blue, orange, pink‐red, red, and deep‐red. Based on the values of solubility parameters, the PFO and MEH‐PPV are miscible to each other and trapped in the PMMA matrix. Hence, energy transfer between these two polymers is possible. The smaller aggregated domains in the ES fiber compared to those of spin‐coated films possibly reduce the efficiency of energy transfer, leading to different emission colors. Also, the prepared ES fibers had higher photoluminescence efficiencies than those of the spin‐coated films. Pure white light‐emitting fibers prepared from the PFO/MEH‐PPV/PMMA blend ratio of 9.5/0.5/90 had the Commission Internationale de L'Eclairage (CIE) coordinate of (0.33, 0.31). Our results showed that different color light‐emitting ES fibers were produced through optimizing the composition of semiconducting polymer in the transparent polymer matrix. This type of ES fibers could have potential applications as new light sources or sensory materials for smart textiles. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 463–470, 2009     

A wide band gap polymer derived from 3,6‐carbazole and tetraphenylsilane as host for green and blue phosphorescent complexes

We have synthesized a novel wide band gap polymer P36HCTPSi derived from 3,6‐carbazole and tetraphenylsilane by palladium‐catalyzed Suzuki coupling reaction. The resultant polymer shows a high glass transition temperature (217 °C) and good thermal stability. The conjugation length of P36HCTPSi is effectively confined because of the δ‐Si interrupted polymer backbone. The polymer exhibits a violet emission with a peak at 392 nm in solution, and the band gap estimated from the onset of its absorption is 3.26 eV. The high energy emission and wide band gap of P36HCTPSi make it appropriate host for green and blue emission phosphorescent materials. Efficient energy transfers from P36HCTPSi to both fac‐tris[2‐(2‐pyridyl‐kN)‐5‐methylphenyl]iridium(III) (green emission) and bis[(4,6‐difluorophenyl)pyridinato‐N,C²]‐(picolinato)iridium(III) (blue emission) were observed in photoluminescence (PL) spectra. Highly efficient phosphorescent polymer light‐emitting devices were realized by using P36HCTPSi as the host for iridium complexes, the maximum luminous efficiencies for green and blue devices were 27.6 and 3.4 cd/A, respectively. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4784–4792, 2009     

Coumarin‐containing poly(fluorenediylvinylene)s: Synthesis,photophysics, and electroluminescence

Two new poly(fluorenediylvinylene)s (CV and CF) with coumarin side chains were synthesized via Heck coupling. The coumarin segments were attached to the C‐9 of fluorene through alkyl spacers. The polymers were soluble in common organic solvents such as tetrahydrofuran (THF), chloroform, dichloromethane, and toluene. The photoluminescence (PL), electroluminescence (EL), and electrochemical behavior of these polymers were studied. CV and CF thin films exhibited broad‐band, bluish‐green and orange PL emissions, with maxima at 475 and 585 nm, respectively. These PL maxima were redshifted in comparison with those measured in THF solutions. Aggregate formation played an important role in the solid state. The aggregation was more pronounced in CF thin films than CV thin films. Both polymers oxidized and reduced irreversibly. Light‐emitting devices (LEDs) with indium tin oxide hole‐injecting and aluminum electron‐injecting electrodes were prepared and studied. The LEDs made of CV emitted green light, and the LEDs made of CF exhibited an orange EL emissions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5750–5762, 2006     

Optical properties of a novel fluorene‐based thermally stable conjugated polymer containing pyridine and unsymmetric carbazole groups

A new diiodo monomer containing heterocyclic pyridine and carbazole groups was synthesized via Chichibabin reaction and used in the preparation of a conjugated polymer via Suzuki coupling approach. The conjugated polymer was highly soluble in common organic solvents such as NMP, THF, dichloromethane, chloroform, toluene, xylene, and benzene at room temperature. The polymer had high glass transition temperature at 191 °C and T_d10 at 434 °C in nitrogen atmosphere. The pristine polymer exhibited the UV–vis maximum absorption at 355 nm and shifted to 420 nm after protonation. The emission of the polymer in THF solution changed from the blue region with maximum peak at 400 nm to the yellow region with maximum peak at 540 nm after protonated by HCl, and the intensity of emission depended on the concentration of acid. The polymer also showed electrochromic behavior under applied voltage. The emission color of the polymer film changed from blue (435 nm) to yellow (570 nm) when 2.5 V bias voltage was applied. The polymer also exhibited write‐once and read‐many‐times (WORM) polymer memory effect with tristable states. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 991–1002, 2009     

Electronic structure and optical properties of poly[3‐(4‐octylphenoxy)thiophene]: Experimental and theoretical studies

This article reports the synthesis and characterization of a new polythiophene derivative phenoxy‐substituted, the poly[3‐(4‐octylphenoxy)thiophene] (POPOT). The oxidative polymerization was found to yield low molecular weight material, whereas a modified Grignard metathesis (GRIM) yielded polymers of high molecular weights. One‐ and two‐dimensional NMR indicated the latter to be highly regioregular. POPOTs exhibited higher thermal stabilities than equivalent alkoxy‐substituted polythiophenes and exhibited red shifts in the absorption spectra with respect to equivalent. The absorption spectra showed a red shifted λ_max at 540 nm in tetrahydrofuran solutions and 580 nm in spin‐coated films, with respect to poly(3‐alkylthiophene)s. A further red shift of 40 nm in going from solution (540 nm) to solid states (580 nm) is correlated with results from density functional theory electronic structure calculations. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7505–7516, 2008     

Pyrenylamine‐functionalized aromatic polyamides as efficient blue‐emitters and multicolored electrochromic materials

A series of novel aromatic polyamides with pyrenylamine in the backbone were prepared from a newly synthesized dicarboxylic acid monomer, N,N‐di(4‐carboxyphenyl)‐1‐aminopyrene, and various aromatic diamines via the phosphorylation polyamidation technique. These polyamides were readily soluble in many organic solvents and could be solution‐cast into tough and amorphous films. They had useful levels of thermal stability with glass‐transition temperatures in the range of 276–342 °C and 10% weight loss temperatures in excess of 500 °C. The dilute N‐methyl‐2‐pyrrolidone (NMP) solutions of these polymers exhibited fluorescence maxima around 455–540 nm with quantum yields up to 56.9%. The polyamides also showed remarkable solvatochromism of the emission spectra. Their films showed reversible electrochemical oxidation and reduction accompanied by strong color changes from colorless neutral state to purple oxidized state and to yellow reduced state. The polyamide 4g containing the pyrenylamine units in both diacid and diamine sides exhibited easily accessible p‐ and n‐doped states, together with multicolored electrochromic behaviors. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Aging of poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene)/toluene solutions and subsequent effects on luminescence behavior of cast films

Morphological effects in luminescence properties of a representative semiconducting polymer, poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV), has recently attracted much attention. Previous studies indicated that short-term heat treatment of solution-cast MEH-PPV films may result in the formation of mesomorphic order that is responsible for the "red" emission around 640 nm, in contrast to the single-chromophore "yellow" emission near 590 nm from the disordered matrix. On the basis of microscopic and spectroscopic evidence for films cast from freshly prepared and aged solutions, here we show that prolonged storage of MEHyellowPPV solutions at room temperature or lower may result in retardation of the thermally induced mesophase formation in the subsequently cast films. According to small-angle neutron scattering and differential scanning calorimetric observations over aged MEH-PPV/toluene solutions, we propose that the suppressed transformation into mesomorphic order is due to further development of nanocrystalline aggregates that serve as physical cross-links among MEH-PPV chains in the solution state upon long-term storage. These solvent-induced nanocrystalline aggregates, however, do not exhibit new spectroscopic features beyond the suppression of "red" emission at 640 nm from the mesomorphic phase.     

Novel blue‐greenish electroluminescent poly(fluorenevinylene‐alt‐dibenzothiophenevinylene)s and their model compounds

Poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐2,8‐vinylene) (PS) and poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐5,5‐dioxide‐2,8‐ vinylene) (PSO) as well as corresponding model compounds were synthesized by Heck coupling. Both the polymers and model compounds were readily soluble in common organic solvents such as tetrahydrofuran, dichloromethane, chloroform, and toluene. The polymers showed a decomposition temperature at ～430 °C and a char yield of about 65% at 800 °C in N₂. The glass‐transition temperatures of the polymers were almost identical (75–77 °C) and higher than those of the model compounds (26–45 °C). All samples absorbed around 390 nm, and their optical band gaps were 2.69–2.85 eV. They behaved as blue‐greenish light emitting materials in both solutions and thin films, with photoluminescence emission maxima at 450–483 nm and photoluminescence quantum yields of 0.52–0.72 in solution. Organic light‐emitting diodes with an indium tin oxide/poly(ethylene dioxythiophene):poly(styrene sulfonic acid)/polymer/Mg:Ag/Ag configuration with polymers PS and PSO as emitting layers showed green electroluminescence with maxima at 530 and 540 nm, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6790–6800, 2006     

Phase separation of polymer‐functionalized SWNTs within a PMMA/polystyrene blend

Phase separation of polystyrene (PS) and poly(methyl methacrylate) (PMMA) blends was used as a means to segregate PS‐ or PMMA‐functionalized single‐walled carbon nanotubes (SWNTs) in thin films. Dilute solutions (5 wt % in THF) of 1:1 PS/PMMA blends containing the functionalized nanotubes were spin cast and annealed at 180 °C for 12 h. Two different polymer molecular weights were used (M_n = 8000 or M_n = 22,000), and were of approximately equivalent molecular weight to those attached to the surface of the nanotubes. Nanotube functionalization was accomplished using the Cu(I)‐catalyzed [3 + 2] Huisgen cycloaddition, in which alkyne‐decorated nanotubes were coupled with azide‐terminated polymers, resulting in polymer‐SWNT conjugates that were soluble in THF. Characterization of the annealed films by scanning Raman spectroscopy, which utilized the unique Raman fingerprint of carbon nanotubes, enabled accurate mapping of the functionalized SWNTs within the films relative to the two phase‐separated polymers. It was found that nanotube localization within the phase‐separated polymer films was influenced by the type of polymer attached to the nanotube surface, as well as its molecular weight. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 450–458, 2009     

Polyaniline/poly(methyl methacrylate) coaxial fibers: The fabrication and effects of the solution properties on the morphology of electrospun core fibers

Electrically conductive polyaniline (PANi)/poly(methyl methacrylate) (PMMA) coaxial fibers were prepared through the chemical deposition of PANi onto preformed PMMA fibers via in situ polymerization. PMMA fibers were prepared as core materials via electrospinning. Spectral studies and scanning electron microscopy observations indicated the formation of PANi/PMMA coaxial fibers with a diameter of approximately 290 nm and a PANi layer thickness of approximately 30 nm. The conductivity of the PANi/PMMA coaxial fibers was significantly higher than that of electrospun fibers of PANi/poly(ethylene oxide) blends and blend cast films of the same PANi composition. To reproducibly generate uniform‐core polymer fibers, the organic solution properties that affected the morphology and diameter of the electrospun fibers were investigated. The polymer molecular weight, solution concentration, solvent dielectric constant, and addition of soluble organic salts were strongly correlated to the morphology of the electrospun fiber mat. In particular, the dielectric constants of the solvents substantially influenced both the fiber diameter and bead formation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3934–3942, 2004     

Novel thermally stable poly(amine hydrazide)s and poly(amine‐1,3,4‐oxadiazole)s for luminescent and electrochromic materials

We describe the preparation, characterization, and luminescence of four novel electrochromic aromatic poly(amine hydrazide)s containing main‐chain triphenylamine units with or without a para‐substituted N,N‐diphenylamino group on the pendent phenyl ring. These polymers were prepared from either 4,4′‐dicarboxy‐4″‐N,N‐diphenylaminotriphenylamine or 4,4′‐dicarboxytriphenylamine and the respective aromatic dihydrazide monomers via a direct phosphorylation polycondensation reaction. All the poly(amine hydrazide)s were amorphous and readily soluble in many common organic solvents and could be solution‐cast into transparent and flexible films with good mechanical properties. These poly(amine hydrazide)s exhibited strong ultraviolet–visible absorption bands at 346–348 nm in N‐methyl‐2‐pyrrolidone (NMP) solutions. Their photoluminescence spectra in NMP solutions or as cast films showed maximum bands around 508–544 and 448–487 nm in the green and blue region for the two series of polymers. The hole‐transporting and electrochromic properties were examined by electrochemical and spectroelectrochemical methods. All obtained poly(amine hydrazide)s and poly(amine‐1,3,4‐oxadiazole)s exhibited two reversible oxidation redox couples at 0.8 and 1.24 V vs. Ag/AgCl in acetonitrile solution and revealed excellent stability of electrochromic characteristics, changing color from original pale yellow to green and then to blue at electrode potentials of 0.87 and 1.24 V, respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3245–3256, 2005     

A facile approach to fabricate hierarchically structured poly(3‐hexylthiophene‐2,5‐diyl) films

Microstructured surfaces have great potentials to improve the performances and efficiency of optoelectronic devices. In this work, a simple robust approach based on surface instabilities was presented to fabricate poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) films with ridge‐like/wrinkled composite microstructures. Namely, the hierarchically patterned films were prepared by spin coating the P3HT/tetrahydrofuran (THF) solution on a polydimethylsiloxane (PDMS) substrate to form stable ridge‐like structures, followed by solvent vapor swelling to create surface wrinkles with the orientation guided by the ridge‐like structures. During spin coating of the P3HT/THF solution, the ridge‐like structures were generated by the in‐situ template of the THF swelling‐induced creasing structures on the PDMS substrate. To our knowledge, it is the first report that the creasing structures are used as a recoverable template for patterning films. The crease‐templated ridge‐like structures were well modulated by the THF swelling time, the modulus of the PDMS substrate, the P3HT/THF solution concentration and the selective/blanket exposure of the PDMS substrate to O₂ plasma. UV–vis and fluorescence spectrometry measurements indicated that the light absorption and fluorescent emission were improved on the hierarchically patterned P3HT films, which can be utilized to enhance the efficiencies of organic solar cells. Furthermore, this simple versatile method based on the solvent swelling‐induced crease as the in‐situ recoverable template has been extended to pattern other spin‐coated films with different compositions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 928–939     

Incorporation of titanium dioxide particles into polymer matrix using block copolymer micelles for fabrication of high refractive and transparent organic–inorganic hybrid materials

We report a novel strategy for incorporation of titanium dioxide (TiO₂) particles into poly(methyl methacrylate) (PMMA) to exploit high refractive and transparent organic–inorganic hybrid materials. Formation of TiO₂ particles of around 20 nm was conducted within hydrophilic core of block copolymer micelles of poly(methyl methacrylate‐block‐acrylic acid) (PMMA‐b‐PAA) in toluene via sol–gel process from titanium isopropoxide and hydrochloric acid. Subsequently, incorporation of TiO₂ particles into PMMA matrix was carried out by casting toluene solution of TiO₂ precursor‐loaded copolymer micelles, prepared from PMMA₃₅₀‐b‐PAA₉₃ and the precursor of mole ratio Ti⁴⁺/carboxyl 4.0, and PMMA. Hybrid films of TiO₂/PMMA exhibited high transparency to achieve transmission over 87% at 500 nm at 30 wt % of TiO₂ content. The refractive index of resulting hybrid films at 633 nm linearly increased with TiO₂ content to attain 1.579 at 30 wt % TiO₂, which was 0.1 higher than that of PMMA. Cross‐sectional transmission electron microscope images of TiO₂/PMMA hybrid films showed existence of TiO₂ clusters less than 100 nm, which were probably formed by aggregation or agglutination of TiO₂ particles during a drying process. It was also observed that decomposition temperature of the hybrid films elevated with increasing TiO₂ content. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and optical properties of a poly(p‐phenylenevinylene) derivative and polyfluorenes with bipolar groups along the main chain

A poly(p‐phenylenevinylene) derivative (PPV–TPA)] and a series of statistical copolyfluorenes (PF–TPA)] containing oxadiazole and triphenylamine segments along the main chain were synthesized by the Heck reaction and nickel‐mediated coupling, respectively. The PF–TPA copolyfluorenes with relatively low contents of oxadiazole and triphenylamine units were readily soluble in common organic solvents, whereas the other copolyfluorenes displayed lower solubility. PPV–TPA showed excellent solubility in solvents such as tetrahydrofuran (THF), dichloromethane, chloroform, and toluene. Thin films of the polymers absorbed light in the range of 375–396 nm and had optical band gaps of 2.76–2.98 eV. They emitted blue‐green light with a maximum at 414–522 nm. The fluorescence quantum yields in THF solutions were 0.08–0.53. The copolyfluorene PF–TPA thin films with high contents of oxadiazole and triphenylamine moieties emitted pure blue light that remained stable even after annealing at 150 °C for 4 h in air. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3556–3566, 2006     

Transparent polymeric hybrid film of ZnO nanoparticle quantum dots and PMMA with high luminescence and tunable emission color

ZnO nanoparticle quantum dots (QDs)/poly(methyl methacrylate) (PMMA) composites are synthesized by conventional radical polymerization in the presence of 3-(trimethoxysilyl)propylmethacrylate (TPM)-modified ZnO nanoparticle QDs. Although unmodified ZnO nanoparticle QDs were precipitated in tetrahydrofuran (THF) and show only weak emissions under UV irradiation, ZnO nanoparticle QDs/PMMA composite is well dispersed in THF and shows high emissions. TPM acts as the stabilizer and promotes the compatibility between the ZnO nanoparticle QDs and the PMMA matrix. After evaporation of THF from the ZnO nanoparticle QDs/PMMA composite solution, transparent polymeric hybrid films of ZnO nanoparticle QDs and PMMA are obtained. These polymeric hybrid films are characterized by photoluminescence (PL) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), and thermogravimetric analysis. The hybrid film exhibited a high quantum yield and PL emission under ultraviolet excitation. PL emission has been successfully tuned from blue to yellow.     

Novel family of triphenylamine‐containing,hole‐transporting,amorphous, aromatic polyamides with stable electrochromic properties

We report the preparation and characterization of a series of novel electrochromic, aromatic poly(amine amide)s with pendent triphenylamine units. The synthesis proceeded via direct phosphorylation polycondensation between a novel diamine, N,N‐bis(4‐aminophenyl)‐N′,N′‐diphenyl‐1,4‐phenylenediamine, and various aromatic dicarboxylic acids. All the poly(amine amide)s were amorphous and readily soluble in many common organic solvents and could be solution‐cast into transparent, tough, and flexible films with good mechanical properties. They exhibited good thermal stability and 10% weight‐loss temperatures above 540 °C. Their glass‐transition temperatures were 263–290 °C. These polymers in N‐methyl‐2‐pyrrolidinone solutions exhibited strong ultraviolet–visible absorption peaks at 307–358 nm and photoluminescence peaks around 532–590 nm in the green region. The hole‐transporting and electrochromic properties were studied with electrochemical and spectroelectrochemical methods. Cyclic voltammograms of poly(amine amide) films prepared by the casting of polymer solutions onto an indium tin oxide coated glass substrate exhibited two reversible oxidation redox couples at 0.65 and 1.03 V versus Ag/AgCl in an acetonitrile solution. All the poly(amine amide)s showed excellent stability with respect to their electrochromic characteristics; the color of the films changed from pale yellow to green and then blue at 0.85 and 1.25 V, respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2085–2098, 2005     

Poly(methyl methacrylate)/silica nanocomposite fibers by electrospinning

Uniform poly(methyl methacrylate) (PMMA)/silica nanocomposite fibers containing up to 20 wt % silica were prepared by electrospinning. The electrospun solutions were prepared by mixing a solution of PMMA in dimethyl formamide (DMF) with colloidal silica in methyl ethyl ketone (MEK). The average fiber diameter decreases from 2.49 μm to 1.69 μm when 20 wt % silica is incorporated as a result of considerably increased solution conductivity, although the solution viscosity increases significantly, which should result in opposite effect. Thinner fibers (down to 350 nm) can be obtained by changing DMF/MEK proportion and by the addition of an ammonium salt. Nano‐sized silica particles (10–40 nm) distributes homogeneously in the fibers, as revealed by transmission electron microscopy. Furthermore, the incorporation of silica nanoparticles can change the thermal properties and surface wettability of the fiber mats. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1211–1218, 2009