Linear poly(amide triazole)s derived from d‐glucose

The click reaction between azides and alkynes is been increasingly employed in the preparation of polymers. In this article, we describe the synthesis and click polyaddition reaction of a new A‐B‐type amide monomer—prepared from d ‐glucose as renewable resource—containing the alkyne and azide functions. Both Cu(I)‐catalyzed and metal‐free click polymerization methods were used to prepare glucose‐derived poly(amide triazole)s. The resulting polymers had weight‐average molecular weights in the 45,000–129,000 range and were characterized by GPC, IR, and NMR spectroscopies. Thermal and X‐ray diffraction studies revealed them to be amorphous. Their qualitative solubilities in various solvents and their water sorption have been studied. The poly(amide triazole)s having the alcohol functions protected as methyl ether were water‐soluble. The presence of the amide functions along the polymer chain made these polytriazoles degradable in the presence of sodium deuteroxide. The degradation was monitored by NMR analysis, and the degradation product was characterized by HRMS. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 629–638     

Synthesis of a novel one‐pot approach of hyperbranched polyurethanes and their properties

A new method for the synthesis of hyperbranched polymers involving the use of AB_x macromonomers containing linear units have been investigated. Two types of novel hyperbranched polyurethanes have been synthesized by a one‐pot approach. The structures of monomers and polymers were characterized by elemental analysis, ¹H NMR, ¹³C NMR, Fourier transform infrared spectroscopy, gel permeation chromatography, and thermogravimetric analysis. The hyperbranched polymers have been proven to be extremely soluble in a wide range of solvents. Polymer electrolytes were prepared with hyperbranched polymer, linear polymer as the host, and lithium perchlorate (LiClO₄) as the ion source. Analysis of the isotherm conductivity dependence of the ion concentration indicated that these hyperbranched polymers could function as a “solvent” for the lithium salt. The conductivity increased with the increasing concentration of hyperbranched polymers in the host polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 344–350, 2002     

1,2,3‐Triazole derivatives of 3‐ferrocenylidene‐2‐oxindole: Synthesis,characterization, electrochemical and antimicrobial evaluation

A series of bioactive, triazole‐linked benzyl, aryl, sugar and aliphatic conjugates of 3‐ferrocenylidene‐oxindole have been synthesized. A facile 1,3‐dipolar‐Huisgen coupling reaction of the respective azides with the 3‐ferrocenylidene‐oxindole N‐propargyl moiety ( 3 ) gave the corresponding conjugates ( 5a–n ). All the newly synthesized compounds ( 5a–n ) were characterized by ¹H‐NMR, ¹³C‐NMR, HRMS, Fourier transform‐infrared spectroscopy and elemental analysis. The UV–Vis and electrochemical studies of these compounds were performed in dimethylsulfoxide solutions. The structure of compound ( 3 ) was determined by single crystal X‐ray diffraction study. These compounds exhibited moderate to good antimicrobial activity against Gram‐positive and Gram‐negative strains.     

Synthesis and characterization of phosphonate‐containing polysiloxanes

Phosphonate‐functionalized polysiloxanes have been prepared with a new siloxane/phosphonate monomer. The reaction of 3‐chloropropylmethyldimethoxysilane with trimethylphosphite or triethylphosphite produces several new monomers containing pendant phosphonate groups. Copolymerization with dimethyldimethoxysilane has produced polymers soluble in most organic solvents. The acid hydrolysis of the phosphoryl esters has produced hydrophilic siloxane polymers containing phosphonic acid groups. The thermal properties of the polymers and several related small molecules have been compared with thermogravimetric analysis. Both the monomers and the resulting polymers have been characterized with ¹H, ¹³C, ³¹P, and ²⁹Si NMR. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 48–59, 2003     

Hydrogen‐bonded thermotropic liquid‐crystalline polyester–amides from bis(hydroxy alkamido)aranes: Synthesis and properties

Hydrogen‐bonded aromatic–aliphatic polyester–amides (PEAs) were prepared by solution/melt polycondensation of aromatic–aliphatic amidodiols 1,4‐bis(4‐hydroxybutyramide)benzene (BHBB), 1,4‐bis(5‐hydroxy pentamide)benzene, 1,4‐bis(6‐hydroxyhexamide)benzene, 1,4‐bis(4‐hydroxybutyramidexylene), 1,4‐bis(5‐hydroxypentamidexylene, 1,4‐bis(4‐hydroxybutyramide)benzene, and 1,4‐bis(6‐hydroxyhexamidexylene) with terephthaloyl chloride/dimethyl terephthalate. Aromatic–aliphatic amido diols were prepared by the aminolysis of γ‐butyrolactone, δ‐valerolactone, and ?‐caprolactone with aromatic diamines such as paraphenylene diamine and paraxylene diamine. The monomers and polymers were characterized by chemical analysis (hydroxyl value and elemental analysis), Fourier transform infrared spectroscopy, ¹H NMR, and ¹³C NMR. The thermal‐ and phase‐transition behaviors of the polymers were investigated by differential scanning calorimetry in combination with hot‐stage optical microscopy. Crystallinity of polymers was examined with wide‐angle X‐ray diffraction. The polymers exhibited liquid crystallinity with layered structures formed by self‐organization of the hetero intermolecular hydrogen‐bonded networks indicating smectic phases except for PEAs prepared from BHBB. The hydrogen atom of the phenyl‐substituent group forces the neighboring carbonyl groups out of plane of the rings preventing formation of layered structures in the case of BHBB. The PEAs retained intermolecular hydrogen bonding even in the mesomorphic state, and variations in the hydrogen‐bonded lamellae/micelles might be responsible for the variations from one smectic to another texture. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 335–346, 2003     

Synthesis of New 1,2,3‐Triazole Derivatives Possessing 4H‐Pyran‐4‐one Moiety by 1,3‐Dipolar Cycloaddition Reaction of Azidomethyl Phenylpyrone with Various Alkynes

A series of new 1,2,3‐triazole derivatives were synthesized by 1,3‐dipolar cycloaddition reaction of 2‐(4‐azidomethylphenyl)‐6‐phenyl‐4H‐pyran‐4‐one with different alkynes in 40–71% yields. In the case of terminal alkynes, the reaction was proceeded in the presence of Cu(I) catalyst. The structure of the synthesized compounds were confirmed by FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopy and elemental analysis.     

Facile syntheses of 4‐vinyl‐1,2,3‐triazole monomers by click azide/acetylene coupling

Synthetic strategies for the preparation of a new family of vinyl monomers, 4‐vinyl‐1,2,3‐triazoles, have been developed. These monomers are noteworthy as they combine the stability and aromaticity of styrenics with the polarity of vinylpyridines and the structural versatility of acrylate/methacrylate derivatives. To enable the wide adoption of these unique monomers, new methodologies for their synthesis have been elaborated which rely on Cu‐catalyzed azide/acetylene cycloaddition reactions—“click chemistry”—as the key step, with the vinyl substituent being formed by either elimination or Wittig‐type reactions. In addition, one‐pot “click” reactions have been developed from alkyl halides, which allow for monomer synthesis without isolation of the intermediate organic azides. The high yield and facile nature of these procedures has allowed a library of new monomers including the parent compound, 1‐H‐4‐vinyl‐1,2,3‐triazole, to be prepared on large scales. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2897–2912, 2008     

Kinetic study of copper(I)‐catalyzed click chemistry step‐growth polymerization

Oligomers and polymers containing triazole units were synthesized by the copper(I)‐catalyzed 1,3‐dipolar cycloaddition step‐growth polymerization of four difunctional azides and alkynes. In a first part, monofunctional benzyl azide was used as a chain terminator for the polyaddition of 1,6‐diazidohexane and α,ω‐bis(O‐propargyl)diethylene glycol, leading to polytriazole oligomers of controlled average degree of polymerization (DP_n = 3–20), to perform kinetic studies on low‐viscosity compounds. The monitoring of the step‐growth click polymerization by ¹H NMR at 25, 45, and 60 °C allowed the determination of the activation energy of this click chemistry promoted polyaddition process, that is, E_a = 45 ± 5 kJ/mol. The influence of the catalyst content (0.1–5 mol % of Cu(PPh₃)₃Br according to azide or alkyne functionalities) was also examined for polymerization kinetics performed at 60 °C. In a second part, four high molar mass polytriazoles were synthesized from stoichiometric combinations of diazide and dialkyne monomers above with p‐xylylene diazide and α,ω‐bis(O‐propargyl)bisphenol A. The resulting polymers were characterized by DSC, TGA, SEC, and ¹H NMR. Solubility and thermal properties of the resulting polytriazoles were discussed based on the monomers chemical structure and thermal analyses. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5506–5517, 2008     

Synthesis and characterization of alt‐copoly [oligosiloxane/1,4‐bis(ethylenediphenylsilyl)benzene]s

1,4‐Bis(vinyldiphenylsilyl)benzene ( I ) has been prepared and copolymerized by Pt‐catalyzed hydrosilylation with 1,9‐dihydridodecamethylpentasiloxane ( II ), 3,5,7‐tris(3′,3′,3′‐trifluoropropyl)‐1,1,3,5,7,9,9‐heptamethylpentasiloxane ( III ) and two different α,ω‐bis(hydrido)polydimethylsiloxanes (PDMS). The monomers and polymers were fully characterized by IR, UV, ¹H, ¹³C, ¹⁹F, and ²⁹Si‐NMR spectroscopy. The starting PDMS polymers and the product copolymers were further characterized by GPC, DSC, and TGA. The polymers showed thermal transitions characteristic to thermoplastic elastomers. The 1,4‐bis(ethyldiphenylsilyl)benzene moieties displayed melting transitions above room temperature while copolymer glass transition temperatures were below room temperature. Fluorescence spectra and quantum efficiencies of I and copolymers have been determined. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4825–4831, 2006     

Proton conducting polymers containing 1H‐1,2,3‐triazole moieties

Polyacrylates containing a different number of 1H‐1,2,3‐triazole groups per repeat unit have been synthesized via conventional free radical polymerization. These polymers were characterized by nuclear magnetic resonance spectroscopy (NMR), gel permeation chromatography (GPC), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). Proton conductivity measurements were made using impedance spectroscopy. Introduction of more than one triazole per repeat unit did not result in an increase in conductivity as there was an accompanying increase in glass transition temperature (T_g). A maximum conductivity of 17.5 μS/cm was obtained at 200 °C under anhydrous condition. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 188–196, 2009     

Preparation and properties of novel polyimides derived from 4‐aryl‐2,6 bis(4‐amino phenyl)pyridine

To prepare novel polyimides with enhanced thermal stability and high solubility in common organic solvents, diamine monomers, 4‐aryl‐2,6 bis‐(4‐amino phenyl)pyridine, were introduced. The diamines were reacted with three different conventional aromatic dianhydrides including pyromellitic dianhydride, benzophenone tetracarboxylic dianhydride, and hexafluoroisopropylidene‐2,2‐bis(phthalic‐dianhydride) (6FDA) in dimethylacetamide solvent to obtain the corresponding polyimides via the polyamic acid precursors and chemical imidization. The monomers and polymers were characterized by Fourier transform infrared spectroscopy, ¹H NMR, mass spectroscopy, and elemental analysis; and the best condition of polymerization and imidization were obtained via the study of model compound. The polyimides showed little or no weight loss by thermogravimetric analysis up to 500 °C, and those derived from 6FDA exhibited good solubility in various polar solvents. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3826–3831, 2001     

Synthesis of a polyurea from a glucose‐ or mannose‐containing N‐alkyl urea peptoid oligomer

N‐alkyl urea peptoid oligomers containing glucose or mannose have been synthesized and characterized. The oligomers were subsequently polymerized using a step‐growth polymerization with hexamethylene diisocyanate. Equal moles of both monomers were used to guarantee high‐molecular weight polymers. The polymers were characterized by gel permeation chromatography, nuclear magnetic resonance, and Fourier‐transform infrared spectroscopy, and contact angle measurements of solvent cast thin films. Sulfation of the final polymers was achieved using a SO₃/pyridine complex in pyridine to afford the heparin biomimetics. The average degree of sulfation was calculated to be 3.5 sulfates per saccharide as measured by elemental analysis. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5230–5238     

Synthesis,characterization, thermal properties,and antimicrobial activity of 4‐chloro‐3‐methyl phenyl methacrylate/8‐quinolinyl methacrylate copolymers

4‐Chloro‐3‐methyl phenyl methacrylate (CMPM) and 8‐quinolinyl methacrylate (8‐QMA) were synthesized through the reaction of 4‐chloro‐3‐methyl phenol and 8‐hydroxy quinoline, respectively, with methacryloyl chloride. The homopolymers and copolymers were prepared by free‐radical polymerization with azobisisobutyronitrile as the initiator at 70 °C. Copolymers of CMPM and 8‐QMA of different compositions were prepared. The monomers were characterized with IR spectroscopy and ¹H NMR techniques. The copolymers were characterized with IR spectroscopy. UV spectroscopy was used to obtain the compositions of the copolymers. The monomer reactivity ratios were calculated with the Fineman–Ross method. The molecular weights and polydispersity values of the copolymers were determined with gel permeation chromatography. The thermal stability of the polymers was evaluated with thermogravimetric analysis under a nitrogen atmosphere. The homopolymers and copolymers were tested for their antimicrobial activity againstbacteria, fungi, and yeast. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 157–167, 2005     

Synthesis and characterization of side‐chain liquid‐crystalline polymers and study of their role in the crystallization of high‐density polyethylene

Side‐chain liquid‐crystalline polymers (SCLCPs) as nucleating agents for high‐density polyethylene (HDPE) were investigated. For this purpose, the molecular architectures of four different vinyl monomers with liquid‐crystalline properties were designed and prepared with 1‐butanol, 1‐pentanol, 4‐hydroxybenzoic acid, hydroquinone, and acryloyl chloride as the starting materials through alkylation and acylation reactions. The corresponding polymers were synthesized by homopolymerization in 1,4‐dioxane with benzoyl peroxide as the initiator at 60 °C. Both the monomers and the synthesized polymers were characterized with elemental analysis, Fourier transform infrared, and ¹H NMR measurements. Differential scanning calorimetry, thermogravimetric analysis, and hot stage polarized optical microscopy were employed to study the phase‐transition temperature, mesophase texture, and thermal stability of the liquid‐crystalline polymers. The results showed that all the polymers had thermotropic liquid‐crystalline features. Being used as nucleating agents, SCLCPs effectively increased both the crystallization temperature and rate and, at the same time, raised the crystallinity for HDPE. In comparison with common small‐molecule nucleating agents, such as 1,3:2,4‐dibenzylidenesorbitol, SCLCPs are more efficient and are indeed excellent nucleating agents for HDPE. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3067–3078, 2005     

Synthesis,polymerization, and effects on the flame retardancy of boron‐containing styrenic monomers

A boron‐containing styrenic monomer, 5‐benzyl‐2‐phenyl‐5‐(4‐vinylbenzyl)‐[1,3,2]‐dioxaborinane, was synthesized to study the influence of boron on the properties of the homopolymer and copolymer with styrene. A similar monomer without boron was also prepared and polymerized so that the properties of its polymer could be compared with the aforementioned boron‐containing polymers. These monomers were characterized by elemental analysis, mass spectrometry, Fourier transform infrared, and ¹H and ¹³C NMR. The thermal degradation of boron‐containing styrenic polymers was studied by means of Fourier transform infrared, which showed the presence of boric acid as char. The flame‐retardant effect was assessed by the measurement of the limiting oxygen indices and char yields during heating in nitrogen and air. The boron‐containing polymers had higher limiting oxygen indices and gave greater yields of char than those without boron. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem43: 6419–6430, 2005     

A facile route to ureidopyrimidinone‐functionalized polymers via RAFT

Three new ureidopyrimidinone(UPy)‐functionalized chain‐transfer agents (CTAs) have been synthesized for use in reversible addition‐fragmentation chain transfer (RAFT) polymerization. These UPy‐CTAs are able to polymerize a wide variety of vinyl monomers to yield UPy‐functionalized polymers, including homopolymers, block copolymers, and amphiphilic block copolymers. These polymers have been characterized via ¹H and ¹³C NMR spectroscopy, gel permeation chromatography (GPC), UV/visible spectroscopy and differential scanning calorimetry (DSC) to demonstrate end‐group fidelity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Efficient Cu(I) acetate‐catalyzed cycloaddition of multifunctional alkynes and azides: From solution to bulk polymerization

“Click” chemistry is an effective and commonly used technique in polymer chemistry for the synthesis and modification of polymers. In this study, the bulk polymerization of multifunctional alkynes and azides was achieved by the copper(I)‐catalyzed alkyne–azide 1,3‐dipolar cycloaddition. The influence of different catalyst systems on the polymerization kinetics of the “click”reaction were evaluated by differential scanning calorimetry. Surprisingly, Cu(I) acetate showed the most efficient catalytic behavior among the applied Cu(I) salts. The polymerization kinetics in solution were investigated by 1H NMR spectroscopy and size exclusion chromatography. According to the 1H NMR investigation the copper(I)‐catalyzed cycloaddition follows a second‐order kinetics with external catalysis. Additionally, the mechanical properties of the resulting polymers were investigated by depth sensing indentation. Thereby the polymerizations of the alkyne tripropargylamine with the azides 1,3‐bis(azidomethyl)benzene and 1,4‐bis(azidomethyl)benzene resulted in mechanical hard materials. Furthermore, the combination of the alkynes tripropargylamine and di(prop‐2‐yn‐1‐yl) isophorone dicarbamate and polymerization with 1,2‐bis(2‐azidoethoxy)ethane resulted in high indentation moduli. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 239–247     

Synthesis and characterization of hyperbranched polyfluorenes containing triarylpyrazoline cores towards efficient blue light‐emitting diodes

New series of hyperbranched polyfluorenes containing triarylpyrazoline cores, PFZ10 , PFZ20 , PFNZ10 , and PFNZ20 , have been synthesized according to the “A₂ + A′₂ + B₃” Suzuki coupling method. The structures and property of the monomers and conjugated polymers were characterized by elemental analysis, gel permeation chromatography, cyclic voltammetry, thermogravimetric analysis, differential scanning calorimetry, and UV–visible absorption, ¹H NMR, ¹³C NMR, and photoluminescence spectroscopies. All these polymers exhibited good solubility in common organic solvents and good thermal stability. The long‐wavelength emission of polyfluorenes had been effectively reduced in these hyperbranched polymers. Standard polymer light emitting devices (PLEDs) from PFZ10 , PFZ20 , PFNZ10 , and PFNZ20 , with the configuration of ITO/PEDOT/polymer/TPBI/Alq₃/Mg:Ag, exhibited good electroluminescence (EL) properties The PLED based on PFNZ10 emitted pure blue light with a low turn‐on voltage of 5.3 V and a high EL efficiency of about 1.93%. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5296–5307, 2007     

Polymers from a levopimaric acid–acrylic acid Diels–Alder adduct: Synthesis and characterization

The Diels–Alder adduct of levopimaric acid with acrylic acid was efficiently prepared from resin acids. When the adduct was subjected to a dehydrodecarboxylation reaction, a ketone diacid derivative was obtained. New ketone type linear polymers were synthesized by the advanced dehyrodecarboxylation, a nonconventional polycondensation reaction, of both the above in presence of sulfonic catalysts. The polyketones turned out to be excellent tackifiers in adhesive formulae. The ketone polymers were condensed with diamines to give crosslinked polyazomethines. The structures of the monomers and polymers were established by means of elemental analysis, IR and NMR spectroscopy, and molecular weight determinations. Both the polyketones and polyazomethines were low‐molecular‐weight polymers, soluble in some polar and nonpolar solvents. The thermal behavior of the monomers and polymers was evaluated by thermogravimetric analysis. The thermal studies showed that the polymers were substances with good thermal stability, except the polyazomethine synthesized by the condensation of polyketone with an aromatic diamine, which appeared to be a substance with high thermal stability. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5979–5990, 2007     

Synthesis and proton conductivity studies of polystyrene‐based triazole functional polymer membranes

In this study, poly(vinylbenzylchloride) (PVBC) was produced by free‐radical polymerization of 4‐vinylbenzylchloride, and then it was functionalized with 3‐amino‐1,2,4‐triazole (ATri) and 1H‐1,2,4‐triazole (Tri). The composition of the polymers was verified by elemental analysis, and the structure was characterized by Fourier transform infrared and ¹³C‐nuclear magnetic resonance spectra. PVBC was modified by ATri with 68% and Tri with 50% yield. The polymers were doped with trifluoromethanesulfonic acid (TA) at various molar ratios, X = 0.5, 1, 2, and 3 with respect to aminotriazole and triazole units. Proton transfer from TA to the triazole rings was proved with Fourier transform infrared spectroscopy. Thermogravimetric analysis showed that the samples are thermally stable up to approximately 200 °C. Differential scanning calorimetry results illustrated the homogeneity of the materials. Under anhydrous conditions, PVBCATri3TA and PVBCTri3TA showed highest proton conductivity of 0.086 and 0.042 S/cm, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010