Recombination of KrD and XeD ions with electrons

Recombination rate coefficients of protonated and deuterated ions KrH⁺, KrD⁺, XeH⁺ and XeD⁺ were measured using Flowing Afterglow with Langmuir Probe (FALP). Helium at 1600 Pa and at temperature 250 K was used as a buffer gas in the experiments. Kr, Xe, H₂ and D₂ were introduced to a flow tube to form the desired ions. Because of small differences in proton affinities of Kr, D₂ and H₂ mixtures of ions, KrD⁺/D₃⁺ and KrH⁺/H₃⁺ are formed in the afterglow plasma, influencing the plasma decay. To obtain a recombination rate coefficient for a particular ion, the dependencies on partial pressures of gases used in the ion formation were measured. The obtained rate coefficients, α_KrD+(250 K) = (0.9 ± 0.3) × 10⁻⁸ cm³ s⁻¹ and α_XeD+(250 K) = (8 ± 2) × 10⁻⁸ cm³ s⁻¹ are compared with α_KrH+(250 K) = (2.0 ± 0.6) × 10⁻⁸ cm³ s⁻¹ and α_XeH+(250 K) = (8 ± 2) × 10⁻⁸ cm³ s⁻¹.     

Reactions of CO2 with H, H2 and deuterated analogues

Combining a temperature variable 22-pole ion trap with a cold effusive beam of neutrals, rate coefficients k(T) have been measured for reactions of CO₂⁺ ions with H, H₂ and deuterated analogues. The neutral beam which is cooled in an accommodator to T_ACC, penetrates the trapped ion cloud with a well-characterized velocity distribution. The temperature of the ions, T_22PT, has been set to values between 15 and 300 K. Thermalization is accelerated by using helium buffer gas. For reference, some experiments have been performed with thermal target gas. For this purpose hydrogen is leaked directly into the box surrounding the trap. While collisions of CO₂⁺ with H₂ lead exclusively to the protonated product HCO₂⁺, collisions with H atoms form mainly HCO⁺. The electron transfer channel H⁺ + CO₂ could not be detected (<20%). Equivalent studies have been performed for deuterium. The rate coefficients for reactions with atoms are rather small. Within our relative errors of less than 15%, they do not depend on the temperature of the CO₂⁺ ions nor on the velocity of the atoms (k(T) lays between 4.5 and 4.7 × 10⁻¹⁰ cm³ s⁻¹ with H as target, and 2.2 × 10⁻¹⁰ cm³ s⁻¹ with D). For collisions with molecules, the reactivity increases significantly with falling temperature, reaching the Langevin values at 15 K. These results are reported as k = α (T/300 K)^β with α = 9.5 × 10⁻¹⁰ cm³ s⁻¹ and β = −0.15 for H₂ and α = 4.9 × 10⁻¹⁰ cm³ s⁻¹ and β = −0.30 for D₂.     

Solid substrate-room temperature phosphorimetry for the determination of trace protein using ion association complex [Cu(BPY)2]·[(Fin)2] as a phosphorescent probe

Fluorescein (HFin) emitted strong and stable room temperature phosphorescence (RTP) on filter paper after set at 50 °C for 10 min using Li⁺ as the ion perturber. HFin existed as Fin⁻ when the pH value was in the range of 5.45–7.36. Fin⁻ could react with [Cu(BPY)₂]²⁺ (BPY: α,α-bipyridyl) to produce ion association complex [Cu(BPY)₂]²⁺·[(Fin)₂]²⁻, which could enhance the RTP signal of Hfin. In the presence of bovine serum albumin (BSA), the –COOH group of Fin⁻ in the [Cu(BPY)₂]²⁺·[(Fin)₂]²⁻ could react with the –NH₂ group of BSA to form the ion association complex [Cu(BPY)₂]²⁺·[(Fin-BSA)₂]²⁻, which contained –CO–NH– bond. This complex could sharply enhance the RTP signal of Hfin and the ΔI_p was directly proportional to the content of BSA. According to the facts above, a new solid substrate-room temperature phosphorimetry (SS-RTP) for the determination of trace protein had been established using the ion association complex [Cu(BPY)₂]²⁺·[(Fin)₂]²⁻as a phosphorescent probe. This method had wide linear range (0.40 × 10⁻⁹–280 × 10⁻⁹ mg l⁻¹), high sensitivity (the detection limit (LD) was 1.4 × 10⁻¹⁰ mg l⁻¹), good precision (RSD: 3.4–4.9%) and high selectivity (the allowed concentration of coexistent ions or coexistent materials was high). It had been applied to the determination of the content of protein in 10 kinds of real samples, and the result agreed well with pyrocatechol violet-Mo (VI) method (P.V.M.M.), which indicated it had high accuracy. Meanwhile, reaction mechanism for the determination of trace protein with [Cu(BPY)₂]²⁺·[(Fin)₂]²⁻ phosphorescent probe was also discussed. The academic thought of this research could not only be used to develop many kinds of ion association complex phosphorescent probes, but also provided a new way to promote the sensitivity of SS-RTP.     

Heat capacity, enthalpy and entropy of strontium niobate Sr2Nb2O7 and calcium niobate Ca2Nb2O7

The heat capacity and the enthalpy increments of strontium niobate Sr₂Nb₂O₇ and calcium niobate Ca₂Nb₂O₇ were measured by the relaxation time method (2–300 K), DSC (260–360 K) and drop calorimetry (720–1370 K). Temperature dependencies of the molar heat capacity in the form C_pm = 248.0 + 0.04350T − 3.948 × 10⁶/T² J K⁻¹ mol⁻¹ for Sr₂Nb₂O₇ and C_pm = 257.2 + 0.03621T − 4.434 × 10⁶/T² J K⁻¹ mol⁻¹ for Ca₂Nb₂O₇ were derived by the least-square method from the experimental data. The molar entropies at 298.15 K, S_m°(298.15 K) = 238.5 ± 1.3 J K⁻¹ mol⁻¹ for Sr₂Nb₂O₇ and S_m°(298.15 K) = 212.4 ± 1.2 J K⁻¹ mol⁻¹ for Ca₂Nb₂O₇, were evaluated from the low-temperature heat capacity measurements.     

Sub- and post-micellar catalytic and inhibitory effects of cetlytrimethylammonium bromide in the permanganate oxidation of phenylalanine

The kinetics of phenylalanine (phe) oxidation by permanganate has been investigated in absence and presence of cetlytrimethylammonium bromide (CTAB) using conventional spectrophotometric technique. The rate shows first- and fractional-order dependence on [MnO₄⁻] and [phe] in presence of CTAB. At lower values of [CTAB] (≤10.0 × 10⁻⁴ mol dm⁻³), the catalytic ability of CTAB aggregates are strong. In contrast, at higher values of [CTAB] (≥10.0 × 10⁻⁴ mol dm⁻³), the inhibitory effect was observed in absence of H₂SO₄. We find that anions (Br⁻, Cl⁻ and NO₃⁻) in the form of sodium salts are strong inhibitors for the CTAB catalyzed oxidation. Kinetic and spectrophotometric evidences for the formation of an intermediate complex and an ion-pair complex between phe and MnO₄⁻, CTAB and MnO₄⁻, respectively, are presented. A mechanism consistent with kinetic results has been discussed. Complex formation constant (K_c) and micellar binding constant (K_s) were calculated at 30 °C and found to be K_c = 319 mol⁻¹ dm⁻³ and K_s = 1127 mol⁻¹ dm⁻³, respectively.     

Pulsed microwave irradiation effects on the dynamic behavior of a photochemically generated radical pair in a micellar solution

The radical pair dynamics in a photochemical hydrogen abstraction reaction of 2-methyl-1,4-naphthoquinone in a sodium dodecylsulfate micelle was modulated by a microwave pulse. After a short resonant 180° microwave pulse, the recombination of the radical pair was enhanced, its rate constant being determined to be (8.3±0.8)×10⁶ s⁻¹. Other kinetic parameters were determined by the scanning of the microwave pulse position as follows: the formation of the radical pair (3.3±0.3)×10⁷ s⁻¹, the relaxation rate from the triplet (T_±1) levels to the singlet–triplet (T₀) mixed one (3.3±0.3)×10⁵ s⁻¹ at 331 mT, and the radical escape rate (5.8±0.6)×10⁵ s⁻¹.     

The standard partial molar entropy of the aqueous tetra-n-butylammonium cation

The standard partial molar entropy of the aqueous tetrabutylammonium cation, not known previously, has now been obtained, based on the molar entropy of two of its crystalline salts, the iodide and the tetraphenylborate, recently determined experimentally for this purpose. The calculation required also published molar enthalpies of solution and solubilities of these two salts as well as of the perchlorate. The choice of the anions depended mainly on the limited solubilities of the examined salts in water, facilitating the estimation of the relevant activity coefficients. The result is S^∞(Bu₄N⁺, aq) = (380 ± 20) J · K⁻¹ · mol⁻¹ at T = 298.15 K, on the mol · dm⁻³ scale and based on S^∞(H⁺, aq) = (−22.2 ± 1.2) J · K⁻¹ · mol⁻¹ (yielding the ‘absolute’ value). The molar entropy of this cation in the ideal gas standard state, S(Bu₄N⁺, g) = (798 ± 8) J · K⁻¹ · mol⁻¹ then yielded the molar entropy of hydration Δ_hydS^∞ (Bu₄N⁺) = (−418 ± 23) J · K⁻¹ · mol⁻¹.     

Voltammetric studies on the α-tocopherol anion and α-tocopheroxyl (Vitamin E) radical in acetonitrile

The α-tocopheroxyl radical was generated voltammetrically by one-electron oxidation of the α-tocopherol anion (E ^r_1/2=−0.73 V versus Ag|Ag⁺) that was prepared by reacting α-tocopherol with Et₄NOH in acetonitrile (with Bu₄NPF₆ as the supporting electrolyte). Cyclic voltammograms recorded at variable scan rates (0.05–10 V s⁻¹), temperatures (−20 to 20°C) and concentrations (0.5–10 mM) were modelled using digital simulation techniques to determine the rate of bimolecular self-reaction of α-tocopheroxyl radicals. The k values were calculated to be 3×10³ l mol⁻¹ s⁻¹ at 20°C, 2×10³ l mol⁻¹ s⁻¹ at 0°C and 1.2×10³ l mol⁻¹ s⁻¹ at −20°C. In situ electrochemical-EPR experiments performed at a channel electrode confirmed the existence of the α-tocopheroxyl radical.     

Preparation and characterization of lithium ion-conducting glass-ceramics in the Li1 + xCrxGe2 − x(PO4)3 system

Li₂O–Cr₂O₃–GeO₂–P₂O₅ based glasses were synthesized by a conventional melt-quenching method and successfully converted into glass-ceramics through heat treatment. Experimental results of DTA, XRD, ac impedance techniques and FESEM indicated that Li_1.4Cr_0.4Ge_1.6(PO₄)₃ glass-ceramics treated at 900 °C for 12 h in the Li_1 + xCr_xGe_2 − x(PO₄)₃ (x = 0–0.8) system exhibited the best glass stability against crystallization and the highest ambient conductivity value of 6.81 × 10⁻⁴ S/cm with an activation energy as low as 26.9 kJ/mol. In addition, the Li_1.4Cr_0.4Ge_1.6(PO₄)₃ glass-ceramics displayed good chemical stability against lithium metal at room temperature. The good thermal and chemical stability, excellent conducting property, easy preparation and low cost make it promising to be used as solid-state electrolytes for all-solid-state lithium batteries.     

Energetics of copper diphosphates – Cu2P2O7 and Cu3(P2O6OH)2

Differential scanning calorimetry and high temperature oxide melt solution calorimetry are used to study enthalpy of phase transition and enthalpies of formation of Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂. α-Cu₂P₂O₇ is reversibly transformed to β-Cu₂P₂O₇ at 338–363 K with an enthalpy of phase transition of 0.15 ± 0.03 kJ mol⁻¹. Enthalpies of formation from oxides of α-Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂ are −279.0 ± 1.4 kJ mol⁻¹ and −538.8 ± 2.7 kJ mol⁻¹, and their standard enthalpies of formation (enthalpy of formation from elements) are −2096.1 ± 4.3 kJ mol⁻¹ and −4302.7 ± 6.7 kJ mol⁻¹, respectively. The presence of hydrogen in diphosphate groups changes the geometry of Cu(II) and decreases acid–base interaction between oxide components in Cu₃(P₂O₆OH)₂, thus decreasing its thermodynamic stability.     

Cyclic voltammetric study of the catalytic behavior of nickel(I) salen electrogenerated at a glassy carbon electrode in an ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate, BMIMBF4)

Cyclic voltammetry has been employed to examine the electrochemistry of nickel(II) salen at a glassy carbon electrode in an ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate, BMIM⁺BF₄⁻). Residual water in the ionic liquid can be eliminated by introduction of activated molecular sieves into the electrochemical cell. Nickel(II) salen exhibits a one-electron, quasi-reversible reduction to nickel(I) salen, and the latter species serves as a catalyst for the cleavage of carbon–halogen bonds in iodoethane and 1,1,2-trichlorotrifluoroethane (Freon^® 113). In BMIM⁺BF₄⁻ the diffusion coefficient for nickel(II) salen at room temperature has been determined to be 1.8×10⁻⁸ cm² s⁻¹, which is more than 500 times smaller than that (1.0×10⁻⁵ cm² s⁻¹) in a typical organic solvent–electrolyte system such as dimethylformamide (DMF) containing 0.10 M tetramethylammonium tetrafluoroborate.     

Palladized aluminum electrode covered by Prussian blue film as an effective transducer for electrocatalytic oxidation and hydrodynamic amperometry of N-acetyl-cysteine and glutathione

The mediated oxidation of N-acetyl cysteine (NAC) and glutathione (GL) at the palladized aluminum electrode modified by Prussian blue film (PB/Pd–Al) is described. The catalytic activity of PB/Pd–Al was explored in terms of Fe^III[Fe^III(CN)₆]/Fe^III[Fe^II(CN)₆]¹⁻ system by taking advantage of the metallic palladium layer inserted between PB film and Al, as an electron-transfer bridge. The best mediated oxidation of NAC and GL on the PB/Pd–Al electrode was achieved in 0.5 M KNO₃ + 0.2 M potassium acetate of pH 2. The mechanism and kinetics of the catalytic oxidation reactions of the both compounds were monitored by cyclic voltammetry and chronoamperometry. The charge transfer-rate limiting step as well as overall oxidation reaction of NAC or GL is found to be a one-electron abstraction. The values of transfer coefficients α, catalytic rate constant k and diffusion coefficient D are 0.5, 3.2 × 10² M⁻¹ s⁻¹ and 2.45 × 10⁻⁵ cm² s⁻¹ for NAC and 0.5, 2.1 × 10² M⁻¹ s⁻¹ and 3.7 × 10⁻⁵ cm² s⁻¹ for GL, respectively. The modifying layers on the Pd–Al substrate have reproducible behavior and a high level of stability in the electrolyte solutions. The modified electrode is exploited for hydrodynamic amperometry of NAC and GL. The amperometric calibration graph is linear in concentration ranges 2 × 10⁻⁶–40 × 10⁻⁶ for NAC and 5 × 10⁻⁷–18 × 10⁻⁶ M for GL and the detection limits are 5.4 × 10⁻⁷ and 4.6 × 10⁻⁷ M, respectively.     

Polyatomic ions in inductively coupled plasma–mass spectrometry: Part II: Origins of N2H and HxCO ions using experimental measurements combined with calculated energies and structures

Several polyatomic ions in inductively coupled plasma–mass spectrometry are studied experimentally and by computational methods. Novel calculations based on spin-restricted open shell second order perturbation theory (ZAPT2) and coupled cluster (CCSD(T)) theory are performed to determine the energies, structures and partition functions of the ions. These values are combined with experimental data to evaluate a dissociation constant and gas kinetic temperature (T_gas) value. In our opinion, the resulting T_gas value can sometimes be interpreted to deduce the location where the polyatomic ion of interest is generated. The dissociation of N₂H⁺ to N₂⁺ leads to a calculated T_gas of 4550 to 4900 K, depending on the computational data used. The COH⁺ to CO⁺ system yields a similar temperature, which is not surprising considering the similar energies and structures of COH⁺ and N₂H⁺. The dissociation of H₂CO⁺ to HCO⁺ leads to a much lower T_gas (< 1000 to 2000 K). Finally, the dissociation of H₂COH⁺ to HCOH⁺ generates a T_gas value between those from the other H_xCO⁺ ions studied here. All of these measured T_gas values correspond to formation of extra polyatomic ion in the interface or extraction region. The computations reveal the existence of isomers such as HCO⁺ and COH⁺, and H₂CO⁺ and HCOH⁺, which have virtually the same m/z values and need to be considered in the interpretation of results.     

Dynamical Spin Chirality and Magnetoelectric Effect of α-Glycine

Dynamical spin chirality of α-glycine crystal at 301−302 K was investigated by DC (direct current)-magnetic susceptibility measurement at temperatures ranging from 2 to 315 K under the external magnetic fields (H=±1 T) parallel to the b axis. The α-glycine crystallizes in space group P2₁/n with four molecules in a cell, which has centrosymmetric charge distribution. The bifurcated hydrogen bonds N⁺(3)−H(8)···O(1) and N⁺(3)−H(8)···O(2) are stacked along the b axis with different bond intensities and angles, which form anti-parallel double layers. Atomic force spectroscopy result at 303 K indicated that the surface molecular structures of α-glycine formed a regular flexuous framework in the b axis direction. The strong temperature dependence is related to the reorientation of NH³⁺ group and the electron spin flip-flop of (N⁺H) mode. Under the opposite external magnetic field of 1 T and −1 T, the electron spins of N⁺(3)−H(8)···O(1) and N⁺(3)−H(8)···O(2) flip-flop at 301−302 K. These results suggested a mechanism of the magnetoelectric effect based on the dynamical spin chirality of (N⁺H), which induced the electric polarization to produce the onset of pyroelectricity of α-glycine around 304 K.     

Luminescent properties of the potassium zinc phosphates of composition K1−xTlxZn(PO3)3

Crystalline and glassy K_1−xTl_xZn(PO₃)₃ polyphosphates have been synthesized and characterized. UV–visible spectroscopy was systematically used in order to analyze the optical properties of Tl⁺ ions both in crystalline and glassy forms with the similar compositions. The investigated polyphosphates can be considered as a model system since the spectroscopic properties of Tl⁺ ions in the glasses could be deduced by comparison with those in crystals. From structural point of view, in the crystalline forms the thallium ions are six-fold coordinated in a dissymmetrical oxygenated sites. Three luminescences (α, A_X, A_T) have been then observed and were attributed to the isolated Tl⁺ ions. In the glassy forms, an additional luminescence (D) has been detected in the low-energy range and was assigned to the Tl⁺ pairs formation. The relationship between the Tl⁺ site symmetry and its optical properties is discussed in the context of the Fukuda's model.     

Diffusion of Sr and Zr in BaTiO3 single crystals

The diffusion of strontium and zirconium in single crystal BaTiO₃ was investigated in air at temperatures between 1000 °C and 1250 °C. Thin films of SrTiO₃, deposited by spin coating a precursor solution and thin films of zirconium, deposited onto the sample surfaces by sputtering, were used as diffusion sources. The diffusion profiles were measured by SIMS depth profiling on a time-of-flight secondary ion mass spectrometer (ToF-SIMS). The diffusion coefficients of strontium and zirconium were given by D_Sr = 3.6 × 10^2.0±4.4 exp[−(543 ± 117) kJ mol⁻¹/(RT)] cm² s⁻¹ and D_Zr = 1.1 × 10^1.0±2.1 exp[−(489 ± 56) kJ mol⁻¹/(RT)] cm² s⁻¹. The results are discussed in terms of different diffusion mechanisms in the perovskite structure of BaTiO₃.     

Kinetics of the R + HBr RH + Br (CH3CHBr, CHBr2 or CDBr2) equilibrium. Thermochemistry of the CH3CHBr and CHBr2 radicals

The kinetics of the reaction of the CH₃CHBr, CHBr₂ or CDBr₂ radicals, R, with HBr have been investigated in a temperature-controlled tubular reactor coupled to a photoionization mass spectrometer. The CH₃CHBr (or CHBr₂ or CDBr₂) radical was produced homogeneously in the reactor by a pulsed 248 nm exciplex laser photolysis of CH₃CHBr₂ (or CHBr₃ or CDBr₃). The decay of R was monitored as a function of HBr concentration under pseudo-first-order conditions to determine the rate constants as a function of temperature. The reactions were studied separately from 253 to 344 K (CH₃CHBr + HBr) and from 288 to 477 K (CHBr₂ + HBr) and in these temperature ranges the rate constants determined were fitted to an Arrhenius expression (error limits stated are 1σ + Student’s t values, units in cm³ molecule⁻¹ s⁻¹, no error limits for the third reaction): k(CH₃CHBr + HBr) = (1.7 ± 1.2) × 10⁻¹³ exp[+ (5.1 ± 1.9) kJ mol⁻¹/RT], k(CHBr₂ + HBr) = (2.5 ± 1.2) × 10⁻¹³ exp[−(4.04 ± 1.14) kJ mol⁻¹/RT] and k(CDBr₂ + HBr) = 1.6 × 10⁻¹³ exp(−2.1 kJ mol⁻¹/RT). The energy barriers of the reverse reactions were taken from the literature. The enthalpy of formation values of the CH₃CHBr and CHBr₂ radicals and an experimental entropy value at 298 K for the CH₃CHBr radical were obtained using a second-law method. The result for the entropy value for the CH₃CHBr radical is 305 ± 9 J K⁻¹ mol⁻¹. The results for the enthalpy of formation values at 298 K are (in kJ mol⁻¹): 133.4 ± 3.4 (CH₃CHBr) and 199.1 ± 2.7 (CHBr₂), and for α-C–H bond dissociation energies of analogous compounds are (in kJ mol⁻¹): 415.0 ± 2.7 (CH₃CH₂Br) and 412.6 ± 2.7 (CH₂Br₂), respectively.     

Pulse radiolysis study of ion-species effects on the solvated electron in alkylammonium ionic liquids

The spectra and kinetic behavior of solvated electrons (e_sol⁻) in alkyl ammonium ionic liquids (ILs), i.e. N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium bis(trifluoromethanesulfonyl)imide (DEMMA-TFSI), N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium tetrafluoroborate (DEMMA-BF₄), N,N,N-trimethyl-N-propylammonium bis(trifluoromethanesulfonyl)imide (TMPA-TFSI), N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide (PP13-TFSI), N-methyl-N-propylpyrrolidinium bis(trifluoromethanesulfonyl)imide (P13-TFSI), and N-methyl-N-butylpyrrolidinium bis(trifluoromethanesulfonyl)imide (P14-TFSI) were investigated by the pulse radiolysis method. The e_sol⁻ in each of the ammonium ILs has an absorption peak at 1100 nm, with molar absorption coefficients of 1.5–2.3×10⁴ dm³ mol⁻¹ cm⁻¹. The e_sol⁻ decayed by first order with a rate constant of 1.4–6.4×10⁶ s⁻¹. The reaction rate constant of the solvated electron with pyrene (Py) was 1.5–3.5×10⁸ dm³ mol⁻¹ s⁻¹ in the various ILs. These values were about one order of magnitude higher than the diffusion-controlled limits calculated from measured viscosities. The radiolytic yields (G-value) of the e_sol⁻ were 0.8–1.7×10⁻⁷ mol J⁻¹. The formation rate constant of e_sol⁻ in DEMMA-TFSI was 3.9×10¹⁰ s⁻¹. The dry electron (e_dry⁻) in DEMMA-TFSI reacts with Py with a rate constant of 7.9×10¹¹ dm³ mol⁻¹ s⁻¹, three orders of magnitude higher than that of the e_sol⁻ reactions. The G-value of the e_sol⁻ in the picosecond time region is 1.2×10⁻⁷ mol J⁻¹. The capture of e_dry⁻ by scavengers was found to be very fast in ILs.     

Oxidative degradation of non-ionic surfactant (TritonX-100) by chromium(VI)

Degradation of polyoxyethylene chain of non-ionic surfactant (TritonX-100) by chromium(VI) has been studied spectrophotometrically under different experimental conditions. The reaction rate bears a first-order dependence on the [Cr(VI)] under pseudo-first-order conditions, [TritonX-100]  [Cr(VI)] in presence of 1.16 mol dm⁻³ perchloric acid. The observed rate constant (k_obs) was 3.3 × 10⁻⁴ to 3.5 × 10⁻⁴ s⁻¹ and the half-life (t_1/2) was 33–35 min for chromium(VI). The effects of total [TritonX-100] and [H⁺] on the reaction rate were determined. Reducing nature of non-ionic TritonX-100 surfactant is found to be due to the presence of –OH group in the polyoxyethylene chain. It was observed that monomeric and non-ionic micelles of TritonX-100 were oxidized by chromium(VI). When [TritonX-100] was less than its critical micelle concentration (cmc) the k_obs values increased from 0.76 × 10⁻⁴ to 1.5 × 10⁻⁴ s⁻¹. As the [TritonX-100] was greater than the cmc, the k_obs values increases from 2.1 × 10⁻⁴ to 8.2 × 10⁻⁴ s⁻¹ in presence of constant [HClO₄] (1.16 mol dm⁻³) at 40 °C. A comparison was made of the oxidative degradation rates of TritonX-100 with different metal ion oxidants. The order of the effectiveness of different oxidants was as follows: permanganate > diperiodatoargentate(III) > chromium(VI) > cerium(IV).     

Preparation and electrical properties of new oxide ion conductors Ce6−xDyxMoO15−δ (0.0 ≤ x ≤ 1.8)

Ce_6−xDy_xMoO_15−δ (0.0 ≤ x ≤ 1.8) were synthesized by modified sol–gel method. Structural and electrical properties were investigated by means of X-ray diffraction (XRD), Raman, X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). The XRD patterns showed that the materials were single phase with a cubic fluorite structure. Impedance spectroscopy measurement in the temperature range between 350 °C and 800 °C indicated a sharp increase in conductivity for the system containing small amount of Dy₂O₃. The Ce_5.6Dy_0.4MoO_15−δ detected to be the best conducting phase with the highest conductivity (σ_t = 8.93 × 10⁻³ S cm⁻¹) is higher than that of Ce_5.6Sm_0.4MoO_15−δ (σ_t = 2.93 × 10⁻³ S cm⁻¹) at 800 °C, and the corresponding activation energy of Ce_5.6Dy_0.4MoO_15−δ (0.994 eV) is lower than that of Ce_5.6Sm_0.4MoO_15−δ (1.002 eV).