Influence of packing of the reactants and products in solution on the volume parameters of the Diels-Alder reaction

The possible causes of a dramatic difference in the volume parameters (by up to 15–20 cm³ mol^–1) of the Diels-Alder reactions involving bulky and small reactants are discussed. The partial molar volumes of anthracene and 9,10-dihydroanthracene and the heats of their solution in six solvents were determined.Translated from Zhurnal Obshchei Khimii, Vol. 74, No. 10, 2004, pp. 1674–1680.Original Russian Text Copyright © 2004 by Kiselev, Kashaeva, Potapova, Shikhab, Konovalov.This revised version was published online in April 2005 with a corrected cover date.     

Solvent Effect on the Volume of the Diels-Alder Reaction between Tetracyanoethylene and trans,trans-1,4-Diphenyl-1,3-butadiene

From the partial molar volumes of tetracyanoethylene, trans,trans-1,4-diphenyl-1,3-butadiene, and their Diels-Alder adduct, the volumes of the reaction in a series of solvents at 25°C (cm³ mol^{- 1}) were calculated: in dioxane, -26.4; in chloroform, -34.9; in ethyl acetate, -34.5; in acetonitrile, -4.4; in cyclohexanone, -34.0; in 1,2-dichloroethane, -31.8; in benzene, -26.9; in toluene, -24.5; in o-xylene, -21.1; and in mesitylene, -16.9. The solvent effects on the activation and reaction volumes and on the partial molar volumes of the reactants, activated complex, and adduct were discussed.     

Dramatic solvent effect on the volume of the Diels-Alder reaction between tetracyanoethylene and cyclopentadiene

The partial molar volumes (V) and the enthalpies of dissolution (Δ_dis H) for tetracyanoethylene, cyclopentadiene, and their Diels—Alder adduct were determined at 25°C. Eleven solvents of the π- and n-donor type were used. The use of alkylbenzenes as solvents for tetracyanoethylene induces pronounced changes in the enthalpy of dissolution (up to 26 kJ mol⁻¹) and in the partial molar volume (up to 11 cm³ mol⁻¹), whereas these parameters for the adduct change slightly. TheV and Δ_dis H values for cyclopentadiene virtually do not depend on the nature of the solvent. In the case of tetracyanoethylene and the adduct in n-donor solvents, considerable variations of theV and Δ_dis H values are observed; they are not linear functions of the change in the partial molar volume of the adduct. Therefore, the reaction volumes in acetonitrile (−40.69) and ethyl acetate (−45.56) differ sharply from those ino-xylene (−24.28) and mesitylene (−21.76 cm³ mol⁻¹). Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1046–1050, June, 2000.     

Partial molar volumes of 18-crown-6 ether in organic solvents at 25°C

The partial molar volumes at infinite dilution of 18-crown-6 ether (CE) in a variety of polar and polarizable solvents with molar volumes ranging from 18 to 170 cm³-mol^–1, were measured at concentrations ranging from 0.02 to 0.1 mol-L^–1 at 25°C. The partial molar volumes of the solute at infinite dilution showed remarkable dependancy on the molar volume of the solvent. The partial molar volumes at infinite dilution for the CE increases as the solvent molar volume increases.     

Apparent Molar Volumes of Benzyltrimethylammonium Bromide and Its Homologs in Aqueous Solution at 15, 25, and 35°C

Apparent molar volumes at infinite dilution of benzyltrimethylammonium bromide and its butyl and hexyl homologs at 15, 25, and 35°C and of dibenzyldimethylammonium bromide at 25°C in aqueous solution were estimated from density measurements. The additivity rule for the contribution of the methylene groups to the apparent molar volumes was found to be obeyed within a broad range of homologs, which covers the parent salt and the dodecyldimethylbenzylammonium bromide. The volumetric contribution of the phenylene (–C₆H₄–) group was estimated to be 61 cm³-mol^–1 at 25°C. A value of –16.9 ± 0.3 cm³-mol^–1 was suggested for the volumetric contribution of the N⁺ fragment to the apparent molar volume of alkylbenzyldimethylammonium salts.     

Dilatometric studies of reaction volumes for the formation of metal complexes in several solvents

A convenient technique is described to determine reaction volumes by means of direct dilatometry. Reaction volumes were determined for the following complexation reactions: formation of monoamminenickel(II) in water (–0.1±0.5 cm³-mol^–1); formation of the 1:1 nickel(II) complex with isoquinoline in methanol and ethanol (3.2±0.1 and 1.1±0.1 cm³-mol^–1, respectively); formation of the 1:1 isothiocyanatoiron(III) complex in water, Me₂SO, and DMF (8.9±0.2, 12.4±0.7, and 25.1±0.3 cm³-mol^–1, respectively); formation of the 18-crown-6 potassium complex in water (10.9±0.2 cm³-mol^–1). We discussed these values in terms of electrostriction and molecular size.     

Effect of pressure on the solubilities ofo-,m- andp-xylene in water

The solubilities of o-, m- and p-xylene in water were measured at 25.0°C up to 250, 385, and 50 MPa, respectively. The solubility increased with increasing pressure up to 120 MPa (50 MPa for p-xylene) and then decreased. The reaction volumes, V^o accompanying the dissolution at 0.1 MPa were estimated as –3.6±0.5, –3.4±0.5, and –4.1±0.5 cm³-mol^–1 for o-, m-, and p-xylene, respectively, from the pressure dependences of the solubilities. The limiting partial molar volumes, of p- and o-xylene in water under high pressure were estimated from V^o and the molar volume of the xylene. The partial molar volumes decreased with increasing pressure. The reaction volume for the formation of intra-molecular pairwise hydrophobic interaction between the methyl groups, as proposed by Ben-Naim, is discussed for the V^o of p- and o-xylene at 0.1 MPa.     

Kinetics of the ene reactions of 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione with β‐pinene and 2‐carene: Temperature,high pressure,and solvent effects

The data on temperature, solvent, and high hydrostatic pressure influence on the rate of the ene reactions of 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione ( 1 ) with 2‐carene ( 2 ), and β‐pinene ( 4 ) have been obtained. Ene reactions 1 + 2 and 1 + 4 have high heat effects: ∆H_r‐n ( 1 + 2 ) −158.4, ∆H_r‐n( 1 + 4 ) −159.2 kJ mol⁻¹, 25°C, 1,2‐dichloroethane. The comparison of the activation volume (∆V^≠( 1 + 2 ) −29.9 cm³ mol⁻¹, toluene; ∆V^≠( 1 + 4 ) −36.0 cm³ mol⁻¹, ethyl acetate) and reaction volume values (∆V_r‐n( 1 + 2 ) −24.0 cm³ mol⁻¹, toluene; ∆V_r‐n( 1 + 4 ) −30.4 cm³ mol⁻¹, ethyl acetate) reveals more compact cyclic transition states in comparison with the acyclic reaction products 3 and 5 . In the series of nine solvents, the reaction rate of 1+2 increases 260‐fold and 1+4 increases 200‐fold, respectively, but not due to the solvent polarity.     

Densities and Excess Molar Volumes of Binary and Ternary Mixtures of Aqueous Solutions of 2,2,2-Trifluoroethanol with Acetone and Alcohols at the Temperature of 298.15 K and Pressure of 101 kPa

Excess molar volumes V_m^E of the binary mixtures of (trifluoroethanol + 1-propanol), (trifluoroethanol + 2-propanol), (acetone + water), (methanol + water), (ethanol + water), (1-propanol + water), (2-propanol + water), and the ternary mixtures of (trifluoroethanol + methanol + water), (trifluoroethanol + ethanol + water), (trifluoroethanol~+ 1-propanol + water), (trifluoroethanol + 2-propanol + water) and (trifluoroethanol + acetone + water) were measured with a vibrating tube densimeter at the temperature of 298.15 K and the pressure 101 kPa. The extrema in V_m^E of trifluoroethanol mixtures occur at –0.690 cm³-mol^–1 for (trifluoroethanol + 1-propanol), at –0.990~cm³-mol^–1 for (trifluoroethanol + 2-propanol); at 0.562 and –0.973 cm³-mol^–1 for (trifluoroethanol + methanol + water), at 0.629 and –0.973 cm³-mol^–1 for (trifluoroethanol + ethanol + water), at 1.082 and –0.659 cm³-mol^–1 for (trifluoroethanol~+ 1-propanol + water), at 0.998 and –0.991 cm³-mol^–1 for (trifluoroethanol~+ 2-propanol + water), and at 0.515 and –1.472 cm³-mol^–1 for (trifluoroethanol + acetone + water). The experimental ternary V_m^E values were predicted by empirical expressions using binary solution data.     

Spectrophotometric and first-derivative spectrophotometric determination of cadmium witho-hydroxybenzenediazoaminoazobenzene (HDAA)

The synthesis ofo-hydroxybenzenediazoaminoazobenzene (HDAA) is described. Cadmium forms with HDAA in the presence of Triton X-100 a 13 complex, which gives a maximum absorption at 520nm with an apparent molar absorptivity of 1.97 × 10⁵1 · mol^–1 · cm^–1 in pH 10 borax buffer solution and 1.52 × 10⁵1 · mol^–1 · cm^–1 in ammoniacal medium. In both media, Beer's law is followed in the range of 0 –10 g of cadmium in 25ml of solution and the coefficients of variation do not exceed 1.5%. A derivative method has been employed to determine cadmium in certain waste water samples without separation.     

Solvent and pressure effects on the kinetics of reaction of manganese pentacarbonyl bromide with 2,2′-bipyridyl and on the charge-transfer spectrum of MnBr(bipy)(CO)3

Summary Rate laws, rate constants, and activation volumes are reported for reaction of MnBr(CO)₅ with 2,2-bipyridyl and with 1, 10-phenanthroline in methanol. The activation volume of +22cm³ mol^–1 is consistent with a predominantlyD mechanism (CO loss) in this medium, but in 50% aqueous methanol both the kinetic pattern and activation volumes in the region of –20 cm³ mol^–1 for the MnBr(CO)₅ + bipy reaction indicate a key role for bromide dissociation. The solvatochromic behaviour of the MnBr(bipy)(CO)₃ product of these reactions is compared with that of other ternaryd ⁶-diimine complexes, and the piezochromic behaviour of its MLCT spectrum outlined.Author to whom all correspondence should be directed.     

Thermogravimetric and differential scanning calorimetric investigations of manganese–glycine interactions

Thermogravimetric (t.g.) and differential scanning calorimetric (d.s.c.) data have been used to study metal–amino acid interactions in adducts of general formula MnCl₂ · ngly (gly = glycine, n = 0.7, 2.0, 4.0 and 5.0). All the prepared adducts exhibit only a one step mass loss associated with the release of glycine molecules, except for the 0.7gly adduct, which exhibits two glycine mass loss steps. From d.s.c. data, the enthalpy values associated with the glycine mass loss can be calculated: MnCl₂ · 0.7gly = 409 and 399 kJ mol^–1, MnCl₂ · 2.0gly = 216 kJ mol^–1, MnCl₂ · 4.0gly = 326 kJ mol^–1 and MnCl₂ · 5.0gly = 423 kJ mol^–1, respectively. The enthalpy associated with the ligand loss, plotted as function of the number of ligands for the n = 2.0, 4.0 and 5.0 adducts, gave a linear correlation, fitting the equation: H (ligand loss)/kJ mol^–1 = 67 × (number of ligands, n) + 76. A similar result was achieved when the enthalpy associated with the ligand loss was plotted as a function of the _a(COO^–) bands associated with the coordination through the carboxylate group, 1571, 1575 and 1577 cm^–1, respectively, for the n = 2.0, 4.0 and 5.0 adducts, giving the equation H (ligand loss) /kJ mol^–1 = 33.5 × _a(COO^–) /cm^–1 – 52418.5. This simple equation provides evidence for the enthalpy associated with the ligand loss being very closely related to the electronic density associated with the metal–amino acid bonds.     

Inter- and Intramolecular Hetero Diels-Alder Reactions, 49[1] Kinetics and Selectivity of the Intramolecular Hetero Diels-Alder Reaction of 1-Oxa-1,3-butadienes using a Benzylidenebarbituric Acid Derivative Effect of Pressure,Temperature, and Solvent

The intramolecular hetero Diels-Alder reaction of the benzy-lidenebarbituric acid derivative 1 to give the ortho and meta products 2 and 3 is studied under high pressure up to 6 kbar in various solvents. The kinetics is measured by on-line FT-IR spectroscopy up to 3 kbar. The cycloaddition shows a pressure-dependent increase in regioselectivity in favour of the ortho adduct 2. The activation volumes, ΔV, are determined to be -(33.1· 1.2) and -(34.2· 1.5) cm³· mol⁻¹ for the reactions in dichloromethane and tetrahydrofuran at 100°C, respectively. For the cycloaddition in toluene and acetonitrile the activation volumes are found to be -(13.4· 1.5) and -(17.0· 4.1) cm³· mol⁻¹, respectively. Contrary to the large solvent effect on the activation volume, only a minor effect on the activation volume differences, ΔΔV, is observed. Measurement of the molar volumes of 1 and the cycloadducts 2 and 3 show a strong solvent dependency.     

Thermodynamics of aqueous gallium chloride. Apparent molar volumes and heat capacities at 25°C

Apparent molar volumes and heat capacities of aqueous GaCl₃ have been measured at 25°C in binary GaCl₃ solutions up to 3 mol-kg^–1, and in ternary GaCl₃-HCl solutions, containing 0.1345 mol-kg^–1 HCl to suppress hydrolysis, up to a concentration of 1 mol-kg^–1 GaCl₃. Using the Pitzer interaction model for the excess properties, and using ridge regression for the derivation of physically meaningful regression parameters, the measurements yield the following results for the standard molar properties and Pitzer parameters at 25°C: V⁰(GaCl₃)=12.85 cm³-mol^–1; ₀ ^v (GaCl₃)=1.10×10^–4 kg-mol^–1–J^–1–cm^–3; _v ¹ (GaCl₃)=2.12×10^–3 kg–mol^–1–J^–1–cm³; Cv(GaCl₃)=1.34×10^–5 kg²–J^–1–cm³; V^o(GaOHCl₂)=13.84 cm³–mol^–1; C _o ^p (GaCl₃)=–480.8 J–K^–1–mol^–1; _J ⁰ (GaCl₃)=–8.02×10^–6 kg–mol^–1–K^–2; _J ¹ (GaCl₃)=0.73×10^–4 kg–mol^–1–K^–2; C_J(GaCl₃)=–2.52×10^–6 kg²-mol^–2-K^–2; C _p ⁰ (GaOHCl₂)=20.4 J-K^–1-mol^–1. The latter parameter has only mathematical significance, its physical meaning is unclear. Comparison of the present experimental results for the standard molar properties of Ga³⁺ with semi-empirical correlations casts doubt upon the general validity of these correlation methods for trivalent cations.     

Volumetric Properties of Aqueous 2-Chloroethanol Solutions and Volumes of Transfer of Some Amino Acids and Peptides from Water to Aqueous 2-Chloroethanol Solutions

Densities and apparent molar volumes of aqueous 2-chloroethanol were determined at temperatures from 15.0 to 34.4°C using digital densimetry. The results of the volumetric measurements have been used to calculate the following thermodynamic quantites at 25°C: V ₂ ^o = 55.05 ± 0.02 cm³-mol^–1, (V ₂ ^o/T)_p = 0.01486 ± 0.00318 cm³-K^–1-mol^–1, and (² V ₂ ^o/T ²)_p = 0.02972 ± 0.00318 cm³-K^–2-mol^–1. Partial molar volumes of transfer from water to 1 mol-dm^–3 2-chloroethanol have also been determined for L-glycine, L-alanine, L-serine, L-glutamic acid, and L-aspartic acid at 35.0°C. The transfer results have been explained in terms of the nature of the interactions of the groups in the solute and solvent. Hydration numbers of L-glycine and L-alanine have also been calculated in aqueous 2-chloroethanol.     

Far-infrared spectrum,barrier to internal rotation,ro structure,and ab initio calculations for acetylacetylene

The far-infrared spectrum has been recorded from 50 to 360 cm^–1 at a resolution of 0.10 cm^–1 for acetyiacetylene (1-butyne-3-one], CH₃C(O)CCH. The fundamental methyl torsion has been observed at 117.94 cm^–1, from which a periodic barrier to internal rotation has been calculated to be 346 cm^–1 (989 cal mol^–1]. Infrared spectra (3500-50 cm^–1] of the gas and solid and the Raman spectra (3500-100 cm^–1) of the gas, liquid, and solid are reported. Utilizing previously reported rotational constants for three isotopic species,r _o structural parameters have been determined for the heavy-atom skeleton. The fundamental vibrational frequencies, barrier to internal rotation, and structural parameters that have been obtained experimentally are compared to those obtained from ab initio Hartree-Fock calculations employing 3-21G, 6-31G, and DZ basis sets and to the corresponding quantities for some similar molecules.     

Partial molar volumes of sodium chloride solutions at 200 bar,and temperatures from 175 to 350°C

High precision densities of sodium chloride solutions at a constant pressure of 200 bar and temperatures between 175°C and 350°C have been measured by a mercury displacement technique. The densities have been converted to apparent molar volumes. The apparent molar volumes decrease with increasing temperature and decreasing concentration whereas the concentration effect increases with temperature. Standard partial molar volumes range from 8.0 cm³-mol^–1 at 175°C to –600 cm³-mol^–1 at 350°C. The results indicate the applicability of the unextended Debye-Hückel limiting law up to concentrations of 0.02 mol-kg^–1.     

Kinetik der unkatalysierten Urethanbildung

Summary The kinetics of the reaction of phenylisocyanate with 1-butanol have been studied at low concentrations in carbon tetrachloride solution at three temperatures. The present paper describes the relation between the reaction rate and the concentration of the alcohol dimer and the 1:1 alcoholurethane associate. Therefrom we conclude that the monomeric alcohol does not play any significant part in the reaction. We explain the observed rate equation with the second-order term of the reactants with the equality of the productsk _AA K _AA andk _AU K _AU (rate constant and association constant of alcohol dimer and 1:1 alcohol-urethane associate).For the reaction of alcohol dimer H =45.4 kJ mol^–1 and S =– 142J mol^–1K^–1. We interpret this result in terms of a six-cyclic transition state.

     

Densities and Apparent Molar Volumes of Aqueous H<Subscript><Emphasis Type="Bold">3</Emphasis></Subscript>BO<Subscript><Emphasis Type="Bold">3</Emphasis></Subscript> Solutions at Temperatures from 296 to 573 K and at Pressures up to 48 MPa

Densities of four aqueous H₃BO₃ solutions (0.062, 0.155, 0.315, and 0.529 mol-kg^–1) have been measured in the liquid phase with a constant volume piezometer immersed in a precisely controlled liquid thermostat. Measurements were made at temperatures between 296 and 573 K and pressures from 0.82 to 48 MPa. The total uncertainties of the density, pressure, temperature, and molality measurements were estimated to be less than 0.06%, 0.05%, 10 mK, and 0.0005 mol-kg^–1, respectively. The accuracy of the method was confirmed by PVT measurements on pure water for two isobars (30 and 39 MPa) at temperatures from 313 to 573 K. The experimental and calculated (IAPWS formulation) densities for pure water show excellent agreement which is within their experimental uncertainties (average absolute deviation, AAD=0.012%;). Apparent and partial molar volumes were derived using the measured densities for solutions and pure water, and these results were extrapolated to zero concentration to yield the partial molar volumes of the electrolyte (H₃BO₃) at infinite dilution. The temperature, pressure, and concentration dependencies of the apparent and partial molar volumes were studied. Small pressure and concentration effects on the apparent molar volumes were found at temperatures up to 500 K. The parameters of a polynomial type of equation of state for the specific volume V_sol(P, T, m) as a function of pressure, temperature, and molality were obtained with a least-squares method using the experimental data. The root-mean-square deviation between measured and calculated values from this polynomial equation of state is ±0.2 kg-m^–3 for density. Measured values of the solution densities and the apparent and partial molar volumes are compared with data reported in the literature.