Heterogeneous oligomerization catalysts: properties and efficiency

A number of heterogeneous acid type catalysts of silica-alumina nature, which are proposed to be used for petrochemistry by-product oligomerization, have been investigated. Particularly, such key indicators as active site concentration and strength have been determined. These parameters have been determined by the method based on potentiometric titration that is relatively seldom used in heterogeneous catalysis. The number of active site types present in investigated catalysts, as well as concentrations of each type of site, has been determined by mathematical processing of potentiometric titration data. The sequence of mathematical processing of titration data is described. The relationship between the properties of the investigated catalysts and their effectiveness in heterogeneous catalytic cooligomerization of the C₉ fraction of liquid products of diesel fuel pyrolysis has been analyzed. The relationships between yields achieved in the presence of various catalysts and the properties of these catalysts have been defined. Namely, it was determined that the product yield is almost proportional to the active site??s concentration of the catalysts (activated clay materials). The relationship between the strength of active sites and average molecular weight of the cooligomers has been found. The causes of obtained regularities have been analyzed and explained.      

Preparation of selectively protected protoescigenin derivatives for synthesis of escin analogs and neoglycoconjugates

Protoescigenin, the main aglycone of horse chestnut saponin mixture known as escin, was selected as substrate for exploratory chemistry towards selective protection, followed by propargyl ether formation and subsequent condensation with azido-monosaccharides, to obtain novel triazole linked conjugates of the triterpene.      

Reaction of barbituric acid with organic azides and phosphonium ylides

Amination by organic azides has been carried out to provide aminobarbiturates by fusion of a triazole ring to the 5,6-positions of barbituric acid followed by cleavage and thermal elimination of nitrogen, whereas aza-Wittig reaction gave phosphoranylidene barbituric acid salts.      

Corrosion properties of Zn-Ni-P alloys in neutral model medium

The presented work reports on the peculiarities of the anodic behavior, corrosion resistance and protective ability of electrodeposited Zn-Ni-P alloys with a different composition in a model corrosion medium of 5% NaCl. Three characteristic coating types have been investigated using experimental methods such as potentiodynamic polarization (PD) technique and polarization resistance (Rp) measurements. In addition, X-ray diffraction (XRD) analysis as well as scanning electron microscopy (SEM) coupled with an Energy-dispersive X-ray (EDAX) device were applied to determine the differences in the chemical composition and surface morphology which appeared as a result of the corrosion treatment. The data obtained are compared to those of electrodeposited pure Zn coatings with identical experimental conditions demonstrating the enhanced protective characteristics of the ternary alloys during the test period in the model medium. The influence of the chemical and phase composition of the alloys on its corrosion resistance and protective ability is also commented and discussed.      

Effect of oxidation of nitride coatings on corrosion properties of Ti-6Al-4V alloy in 0.9% NaCl at 40°C

The corrosion properties of Ti-6Al-4V alloy with oxidized thermodiffusion nitride coatings were investigated in isotonic 0.9% solution of NaCl at temperature of 40°C. It was shown that modification of nitride coatings by oxygen leads to a deterioration of the protective properties of nitrided surface of Ti-6Al-4V alloy. The protective properties of the alloy with nitride coatings modified by oxygen are determined by the composition of formed surface oxynitride film.      

Hydroconversion of parafine LTP56-H over nickel/Na-mordenite catalysts

Nickel catalysts supported on Na-mordenite were used for paraffin LTP56-H hydroconversion into liquid material as a possible component for engine fuels. The effects of none-catalytic thermal treatment and catalytic conditions-zeolite type and reaction conditions (solvent) on the process of liquefaction of LTP56-H paraffin and physicochemical properties of catalysts were studied. The physicochemical properties of catalytic systems were investigated using XRD, TPR, TPD-NH3 and SEM-EDS methods.      

Controlled pesticide release from biodegradable polymers

Polymers have been widely used in agriculture for applications including controlled release of pesticides and other active ingredients. The ability to predict their delivery helps avoid environmental hazards. Macromolecular matrices used as carriers in controlled release of agricultural active agents, especially pesticides, are reviewed. The review focuses on the advantages and mechanisms of controlled release. It includes biodegradable polymers in agriculture, their manufacturing methods, and their degradation mechanisms and kinetics. The article also presents a critical account of recent release studies and considers upcoming challenges.      

The first synthesis of 3-deoxyoripavine and its utilization in the preparation of 10-deoxyaporphines and cyprodime

The synthesis of 3-deoxyoripavine (7) was realized as a novel and promising intermediate towards the synthesis of the important class of dopaminergic and/or serotonergic 10-deoxyaporphines and the special pharmacological tool µ opioid antagonist cyprodime. Generally, the preparation of these valuable biologically active compounds was achieved in remarkable yields.      

Copper-cobalt ferrites as catalysts for methanol decomposition

Copper-cobalt ferrites with composition Cu_1?xCo_xFe₂O₄, where x= 0.2 and 0.8 were prepared by thermal treatment of co-precipitated precursor. The obtained materials were characterized by TG-DSC, XRD, Transmission and Conversion Electron Mössbauer spectroscopy and temperature programmed reduction with hydrogen. The catalytic properties of ferrites were tested in methanol decomposition to CO and hydrogen.      

Copper(I) π-complexes with allyl derivatives of heterocyclic compounds: structural survey of their crystal engineering

In this review an exhaustive crystallochemical analysis of copper(I) π-complexes with allyl derivatives of heterocyclic compounds has been performed. Structural genesis of inorganic constituents starting from the simplest units to the most complicated aggregates was considered taking into account the specific role of Cu-(C=C) interaction, the construction of the organic ligands, the basicity and nucleophilic activity of their heteroatoms, as well as olefin Cu(I) π-complex preparation route.      

Application of NRTL activity coefficient model to describe the kinetics of gas adsorption

The Non-Random Two-Liquid activity coefficient model is applied to describe the kinetics of pure gas adsorption on energetically heterogeneous solid surfaces. The surface energetic heterogeneity has been represented by the Gaussian-like function of the adsorption energy distribution. Two different kinetic isotherms have been presented. One of them, determined by using the statistical rate theory, has been critically discussed. The applicability of the presented approach has been demonstrated by a quantitative analysis of two sets of experimental data previously reported in the literature.      

Fabrication of superhydrophobic surface of stearic acid grafted zinc by using an aqueous plasma etching technique

A stable superhydrophobic surface of stearic acid grafted zinc was fabricated with two steps, that is, the zinc surface was firstly treated with glow discharge electrolysis plasma (GDEP) and then followed by a grafted reaction of stearic acid onto the treated zinc surface. Results indicated that the wettability of zinc substrate changed from superhydrophily to superhyphodrobicity with a water contact angle (CA) up to 158° and a water sliding angle (SA) less than 5°. The surface morphology and composition were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD), respectively.      

Salutaridine and its derivatives as thebaine-equivalents in the synthesis of aporphines

Here we report the transformation of tetracyclic morphinan salutaridine (1) into 2,3,10,11-tetrasubstituted (R)-aporphines. This method serves as another chemical proof of the previously verified biosynthetic connection with pentacyclic morphinan-6,8-diene-type thebaine. In the presence of nucleophiles, this procedure could lead to pharmacologically interesting new tetrasubstituted aporphinoids. The enantioselective synthesis of 7S-salutaridinol (2) has been also achieved in order to investigate the acid-catalyzed reactions of this natural morphinan.      

Enantioselective Michael additions of aldehydes to nitroalkenes catalyzed with ionically tagged organocatalyst

Enantioselective organocatalytic Michael additions affords useful building blocks for many biologically and medicinally relevant compounds. Ionically-tagged diphenylprolinol silyl ether efficiently catalyzes several Michael additions of aldehydes to nitroalkenes in ionic liquids. The Michael additions work well in ionic liquids; yields up to 95% and enantioselectivities up to 95% ee were achieved. Furthermore, in some cases, the catalytic system was reusable.      

Synthesis and rheology of thermoreversible polyurethane hydrogels

Polyurethanes based on poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer, succinic or citric acid, and ethyl ester L-lysine diisocyanate were synthesized and characterized by FT-IR and GPC. Wetting properties were evaluated by contact angle determinations. The critical micelle concentration was determined from surface tension measurements. Their abillity to undergo self-aggregation and temperature induced gelation was investigated through dynamic oscillatory measurements. The gelation point, sol-gel transitions, and gel structure are influenced by polymer structure, composition, molecular weight, concentration, and heating rate.      

Effect of hydrothermal treatment on the structure of an aluminosilicate polymer

The effect of hydrothermal treatment on the structure of an aluminosilicate polymer prepared by a polycondensation reaction between silicate and hydroxoaluminate in alkaline aqueous solution was studied. The structural changes were investigated using X-ray diffraction analysis, Fourier-transform infrared spectroscopy, scanning electron microscopy imaging and thermogravimetric analysis. The results indicated that the amorphous aluminosilicate polymer transformed into a crystalline product during the hydrothermal treatment at 145°C. The crystalline phase was identified as a mineral of the zeolite group, most likely phillipsite. This transformation required an alkaline environment during the hydrothermal treatment.      

Polymer conjugates with potential biological activity based on new derivatives of 2-mercaptobenzoxazole-synthesis and characterization

New potentially biologically active compounds derived from 2-mercapto-benzoxazole were synthesized and coupled on polymeric support of poly (maleic anhydride-alt-vinyl acetate) for the preparation of polymer-drug conjugates with controlled drug release. All compounds were characterized by elemental and spectroscopy (FT-IR, ¹H-NMR) analysis. The toxicological tests recommend the products for further laboratory screening.      

QSAR of caffeines by similarity cluster prediction

A novel QSAR approach based on correlation weighting and alignment over a hypermolecule that mimics the investigated correlational space was performed on a set of 40 caffeines downloaded from the PubChem database. The best models describing log P and LD50 values of this set of caffeine derivatives were validated against the external test set and in a new predictive model by using clusters of similarity.