Electron beam pretreatment of sewage sludge before anaerobic digestion

The pretreatment of waste-activated sludge (WAS) by electron beam irradiation was studied in order to improve anaerobic sludge digestion. The irradiation dose of the electron beam was varied from 0.5 to 10 kGy. Batch and continuous-flow stirred tank reactors (CFSTRs) were operated to evaluate the effect of the electron beam pretreatment on anaerobic sludge digestion. Approximately 30–52% of the total chemical oxygen demand (COD) content of the WAS was solubilized within 24 h after electron beam irradiation. A large quantity of soluble COD, protein, and carbohydrates leached out from cell ruptures caused by the electron beam irradiation. Volatile fatty acids production from the irradiated sludge was approx 90% higher than that of the unirradiated sludge. The degradation of irradiated sewage sludge was described by two distinct first-order decay rates (k ₁ and k ₂). Most initial decay reaction accelerated within 10 d, with an average k ₁ of 0.06/d for sewage sludge irradiated at all dosages. The mean values for the long-term batch first-order decay coefficient (k ₂) were 0.025/d for irradiated sewage sludge and 0.007/d for unirradiated sludge. Volatile solids removal efficiency of the control reactor fed with unirradiated sewage sludge at a hydraulic retention time (HRT) of 20 d was almost the same as that of the CFSTRs fed with irradiated sludge at an HRT of 10 d. Therefore, disintegration of sewage sludge cells using electron beam pretreatment could reduce the reactor solid retention time by half.     

Determination of mercury in sewage sludge by direct slurry sampling graphite furnace atomic absorption spectrometry

Ultrasonic slurry sampling electrothermal atomic absorption spectrometry (ETAAS) method was elaborated to the determination of Hg in sewage sludge samples with the use of KMnO₄+Pd modifier. The minimum sample amount required for slurry preparation with respect to sample homogeneity was evaluated by weighting masses between 3 and 30 mg directly into the autosampler cups. Validation of the proposed method was performed with the use of Certified Reference Materials of sewage sludge, CRM 007-040 and CRM 144R. Two sewage sludge samples from Poznañ (Poland) city were analysed using the present direct method and a method with sample digestion, resulting in no difference within statistical error.     

Critical evaluation of analytical performance of atomic absorption spectrometry and inductively coupled plasma mass spectrometry for mercury determination

The analytical performance of cold vapor atomic absorption spectrometry (CV AAS), graphite furnace atomic absorption spectrometry (GF AAS) and inductively coupled plasma mass spectrometry (ICP-MS) for mercury determination have been investigated with the use of two reference materials SRM 2710 Montana I Soil and BCR-144R (sewage sludge from domestic origin). The digestion conditions and their influence on determination of mercury have been studied. Samples were decomposed by microwave digestion in closed vessels with the use of HCl alone or mixture of HCl+HNO₃+HF. The digestion solutions were analyzed by CV AAS using NaBH₄ as a reducing agent, by GF AAS with Pd or mixture of Pd/Rh as modifiers and by ICP-MS with Rh as internal standard. In the case of CV AAS, results were not dependent on digestion conditions. In the case of GF AAS and ICP-MS, results depended significantly on digestion conditions; in both cases, the use of the mixture of acids as defined above suppressed the signal of mercury. Therefore, in those cases, the microwave digestion with HCl is recommended. Detection limits of 0.003, 0.01 and 0.2 μg g⁻¹ were achieved by ICP-MS, CV AAS and GF AAS, respectively.     

Microwave digestion of sediment, soils and urban particulate matter for trace metal analysis

A microwave digestion technique was developed to determine the content of nine heavy metals in sediments and soils. The digests were subsequently analysed by inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The metals determined were Ca, Mg, Fe, Mn, Zn, Cr, Cd, Cu, Pb and V. The digestion was achieved by using an acid mixture of HNO₃, HF and distilled H₂O. The experimental study was conducted using four standard reference materials (SRMs): sewage sludge (LGC6136), marine sediment (PACS-1), urban particulate matter (NIST 1648) and coal carbonisation site soil (LGC6138). Two different programs were examined to determine which was optimal for the digestion of real environmental samples. The accuracy and precision of the two digestion programs for the analysis of the SRMs were compared. From the results obtained, the microwave program providing a maximum of power of 650 W and a cycle time of 51 min resulted in the best analytical performance. The experimental results obtained were in good agreement with the certified values and demonstrated that the proposed method is precise and accurate.     

Automatic flow-injection system for the determination of heavy metals in sewage sludge by microwave digestion and detection by inductively coupled plasma-atomic emission spectrometry (MW-ICP/AES)

Results are shown obtained in the optimization of an automatic flow injection system that combines microwave digestion with atomic spectrometric detection (FAAS, ICP/AES) for the determination of heavy metals in sewage sludge. Digestion is performed by preparing a suspension of the sample in 1.5 mol/l HNO₃ and making it flow through a PTFE capillary tube placed inside a conventional microwave oven. The effects of the length and inner diameter of the capillary tube, as well as that of the pumping rate, have been studied in order to find the experimental conditions that allow a quantitative elemental recovery in the shortest period of time possible. The optimization study was carried out on a certified sample (BCR No. 146), and the elements determined were Zn, Cu, Pb, Cd, Ni and Cr. The experimental data (percent recovery vs. digestion time) have been fitted to a mathematical model in order to quantify the influence of each of the variables studied. The optimized procedure (MW-ICP/AES) has been applied to one ordinary and one certified sewage sludge sample. In comparison with the conventional methods of sewage sludge analysis, the one proposed is less time consuming, while being equally precise and accurate.     

Optimization of digestion methods for sewage sludge using the Plackett-Burman saturated design

The Plackett-Burman saturated factorial design was used to select optimized dissolution conditions for sewage sludge samples. Three different digestion methods were applied: i) microwave oven digestion in a domestic oven with Parr-type reactors; ii) microwave oven digestion with controlled-pressure reactors; iii) pressure bomb reactor heated on a hot plate. The three methods were validated by statistically comparing the metal contents found with the certified ones of the sewage sludge sample (BCR 145R). No significant differences were obtained and the RSD values were lower than 3% in all cases. The metals were determined by flame-AAS. The variables studied were the following: microwave power; digestion time; predigestion; volume of hydrochloric acid; volume of hydrofluoric acid; volume of nitric acid. The operative advantages offered by microwave digestion with controlled-pressure reactors were also considered. Received: 23 July 1997 / Revised: 31 October 1997 / Accepted: 5 November 1997     

Optimization of digestion methods for sewage sludge using the Plackett-Burman saturated design

The Plackett-Burman saturated factorial design was used to select optimized dissolution conditions for sewage sludge samples. Three different digestion methods were applied: i) microwave oven digestion in a domestic oven with Parr-type reactors; ii) microwave oven digestion with controlled-pressure reactors; iii) pressure bomb reactor heated on a hot plate. The three methods were validated by statistically comparing the metal contents found with the certified ones of the sewage sludge sample (BCR 145R). No significant differences were obtained and the RSD values were lower than 3% in all cases. The metals were determined by flame-AAS. The variables studied were the following: microwave power; digestion time; predigestion; volume of hydrochloric acid; volume of hydrofluoric acid; volume of nitric acid. The operative advantages offered by microwave digestion with controlled-pressure reactors were also considered. Received: 23 July 1997 / Revised: 31 October 1997 / Accepted: 5 November 1997     

Speciation of heavy metals in sewage sludge after mesophilic and thermophilic anaerobic digestion

Two types of sewage sludge anaerobic digestion were carried out: mesophilic and thermophilic. Metal speciation analysis was performed revealing some changes in the chemical form of the metals during the stabilization process of sludge. After both methane fermentation processes, a comparable level of organic matter distribution was obtained (≈ 40 %). The amount of produced methane during thermophilic and mesophilic digestion was 560 mL of CH4 and 580 mL of CH₄ from 1 g of removed organic matter, respectively. Low concentration of heavy metal ions in the liquid phase of sludge was observed. Metal ions precipitated and remained bound throughout the stabilization process. No accumulation of heavy metals in the mobile fractions of sludge (exchangeable and carbonate) was observed for either digestion process. The highest increase of zinc, copper, nickel, cadmium, and chromium concentration was observed in the organic-sulfide fraction, whereas the highest increase of lead was found in the residual fraction.     

Determination of cadmium by electrothermal atomic absorption spectrometry after microwave-assisted digestion of animal tissues and sewage sludges

The determination of cadmium in different sample types has been carried out by electrothermal atomization atomic absorption spectrometry with D₂-background correction using a unpyrocoated graphite tube, after pressurized microwave-assisted digestion. Five chemical modifiers [(NH₄)₂HPO₄, Pd(NO)₃)₂, Ni(NO₃)₂, thiourea and Triton X-100] have been assayed and nickel nitrate has been found to be most effective for an accurate determination of cadmium in mussel tissue, pig kidney and sewage sludge. The characteristic mass of the method is of the order of 1 pg and the limit of detection is lower than 0.1 ng/ml.     

Codigestion of proteinaceous industrial waste

Organic wastes are increasingly collected source separated, thus requiring additional treatment or recovery capacities for municipal biowastes, organic industrial wastes, as well as agroindustrial byproducts. In this study, we demonstrate that anaerobic digestion is preferentially suited for high-water-containing liquid or pasty waste materials. We also evaluate the suitability of various organic wastes and byproducts as substrates for anaerobic digestion and provide a current status survey of codigestion. Biodegradation tests and estimations of the biogas yield were carried out with semisolid and pasty proteins and lipids containing byproducts from slaughterhouses; pharmaceutical, food, and beverage industries; distilleries; and municipal biowastes. Biogas yields in batch tests ranged from 0.3 to 1.36 L/g of volatile solids_added. In continuous fermentation tests, hydraulic retention times (HRTs) between 12 and 60 d, at a fermentation temperature of 35°C, were required for stable operation and maximum gas yield. Laboratory experiments were scaled up to full-scale codigestion trials in municipal and agricultural digestion plants. Up to 30% cosubstrate addition was investigated, using municipal sewage sludge as well as cattle manure as basic substrate. Depending on addition rate and cosubstrate composition, the digester biogas productivity could be increased by 80–400%. About 5–15% cosubstrate addition proved to be best suited, without causing any detrimental effects on the digestion process or on the further use of the digestate.     

Ag2SO4-CuSO4 催化-微波消解快速测定炼油污水中化学需氧量

以Ａｇ２ＳＯ４－ＣｕＳＯ４为催化剂,探讨了微波消解测定炼油污水中化学需氧量（Ｃｈｅｍｉｃａｌ Ｏｘｙｇｅｎ Ｄｅｍａｎｄ,ＣＯＤｃｒ）的方法。确定了微波消解测定炼油污水ＣＯＤｃｒ的最佳条件;消解功率、消解时间、混酸介质Ｈ３ＰＯ４－Ｈ２ＳＯ４用量、催化剂配比等。用该方法测定炼油水各处理装置出水 的ＣＯＤｃｒ,与经典的ＣＯＤｃｒ回流法所得结果一致。方法适用于临控生产过程。     

Atomic-absorption spectrophotometric determination of antimony, arsenic, bismuth, tellurium, thallium and vanadium in sewage sludge

Electrothermal atomic-absorption spectrophotometry (AAS), by use of a graphite furnace, in conjunction with sample pretreatment by homogenization, was evaluated as a rapid method for the determination of bismuth, thallium and vanadium in sewage sludge. This method was compared with use of flame, electrothermal and hydride-generation (for bismuth) AAS in conjunction with conventional acid digestion and dry-ashing pretreatments and was found to be applicable to this type of sample. Comparisons were also made between flame and hydride-generation AAS in conjunction with an acid digestion pretreatment for the determination of antimony, arsenic and tellurium in sewage sludge. The hydride-generation technique was considered the better for waste-water samples because of its greater sensitivity.     

Thermal analysis of soil amended with sewage sludge and biochar from sewage sludge pyrolysis

The main objective of the present study is to study the behaviour of sewage sludge and biochar from sewage sludge pyrolysis after addition to soil in a context of a temperate agricultural soil. For this, an incubation experiment was designed during 200 days. Carbon mineralization of soil amended with sewage sludge and biochar at two different rates (4 and 8 wt%) was evaluated. Differential thermal analysis, thermogravimetry and the first derivate of the TG were performed in oxidizing conditions on soil samples before and after incubation. Biochar obtained from sewage sludge pyrolysis at 500 °C was more stable in soil than original sewage sludge. After incubation experiment, the reduction of soil organic matter content was significantly lower in soil amended with biochar than in soil amended with sewage sludge. The thermostability index WL₃/WL₂ decreases after incubation in soil amended with biochar, however it increases in case of soil treated with sewage sludge.     

微波消解分光光度法测定污水中的总磷

建立微波消解分光光度法测定污水中总磷的方法。采用微波消解法消解污水．讨论了消解时间和压力对消解效果的影响。测定总磷的线性范围为0～0．4mg/L。用该法测定总磷环境标准样品中的总磷,测定结果与标准值基本一致,测定结果的相对标准偏差为1．65％(n=5)。     

Combined Mesophilic Anaerobic and Thermophilic Aerobic Digestion Process: Effect on Sludge Degradation and Variation of Sludge Property

One-stage autothermal thermophilic aerobic digestion (ATAD) is effective for the reduction of volatile solids (VSs) and pathogen in sewage sludges. A novel process of combining mesophilic (<35 °C) anaerobic digestion with a thermophilic (55 °C) aerobic digestion process (AN/TAD) occurred in a one-stage digester, which was designed for aeration energy savings. The efficiency of sludge degradation and variation of sludge properties by batch experiments were evaluated for the AN/TAD digester with an effective volume of 23 L for 30 days compared with conventional thermophilic aerobic digestion (TAD). The AN/TAD system can efficiently achieve sludge stabilization on the 16th day with a VS removal rate of 38.1 %. The AN/TAD system was operated at lower ORP values in a digestion period with higher contents of total organic compounds, volatile fatty acids, protein, and polysaccharide in the soluble phase than those of the TAD system, which can rapidly decreased and had low values in the late period of digestion for the AN/TAD system. In the AN/TAD system, intracellular substances had lysis because of initial hydrolytic acidification.     

Comparison of Methods for the Preparation of Sewage Sludge Samples Prior to the Spectrophotometric Determination of Phosphorus

Abstract

Three procedures for the preparation of sewage sludge samples prior to the colorimetric determination of phosphorus as “molybdenum blue” were evaluated. Using samples of the US EPA's municipal digested sludge as a reference material, sulfuric acid/ammonium persulfate digestion, muffle furnace ignition followed by extraction of the ash with hydrochloric acid, and direct extraction of the sewage sludge with sodium bicarbonate solution were compared in terms of phosphorus recovery as determined by colorimetric measurements. On the basisof phosphorus recovery, the samples prepared by muffle furnace ignition/hydrochloric acid extraction of the ash showed the best accuracy and precision. This procedure was also superior in terms of the time and effort expended in the preparation of the sewage sludge samples.     

Major and trace element assessment of Tietê river sediments, São Paulo, Brazil

The objective of this study was to quantify major and trace elements present in sediments collected from the one of Brazil’s most important rivers, Tietê River. Sediments from 5 different sampling points (P₀–P₄), in 3 campaigns (2008/2009), from the headwaters to Suzano County upstream from São Paulo city were collected. X-ray fluorescence was applied for measuring total concentration of major elements and instrumental neutron activation analysis (INAA) for trace elements. The elements Cd, Hg and Pb were determined by atomic absorption spectrometry after digestion using the US EPA 3,051 procedure. These metal concentrations were compared to the PEL and TEL oriented values from CCME. The sampling sites P₃ and P₄, near industrialized areas, showed the highest concentrations for potentially bioavailable metals, mainly Pb and Hg. The results obtained by INAA were compared to upper continental crust values. A strong enrichment was found for the elements As, Br, Sb, Th, U and Zn. These results evidenced contamination by industrial effluents and sewage even relatively close to the Tietê River headwaters. The worst biological effects (acute toxicity) on benthonic organism Hyalella azteca were also observed at P₃ and P₄.     

On-line microwave-assisted digestion of solid samples for their flame atomic spectrometric analysis

A new procedure has been developed for the on-line digestion of solids in a microwave oven. The direct injection in a water carrier flow of dispersions of solid samples in concentrated nitric acid, the merging of these slurries with 30% (v/v) H(2)O(2) and the microwave-assisted digestion in a Teflon coil of 100 cm permit a fast and quantitative extraction of Cu and Mn from different solid matrices, such as vegetables, powdered dietary products and sewage sludges. The development of an appropriate interphase, in which digested samples are cooled and degassified, previous to their introduction into the nebulizer of a flame atomic absorption spectrometer, makes possible the full automatization of the digestion and measurement steps of the elemental analysis of solids and it provides a sample frequency of 180 injections per hour. The developed procedure has also been applied for Pb and Zn determination in certified sewage sludge samples, with accurate results obtained for Pb but low results found for Zn.     

Determination of total phosphorus in water by photochemical decomposition with ultraviolet irradiation

A simple and convenient photochemical decomposition method has been developed for the determination of total phosphorus in natural and sewage water. Organic phosphorus compounds and inorganic polyphosphates may be completely converted into orthophosphate in the presence of 0.3M sulphuric acid and 0.12% potassium persulphate with 50 min irradiation. The relative standard deviations found for analysis of natural water (P 35 microg/l.) and sewage (P 2.4 mg/l.) were 5.7% and 1.0% respectively. The method gives results comparable to those obtained by digestion with persulphate.     

Sewage sludge ash as an alternative low-cost oxygen carrier for chemical looping combustion

In this paper, novel low-cost oxygen carriers containing Fe₂O₃ are evaluated for use in chemical looping combustion. Sewage sludge ashes and reference samples were prepared and used in cyclic reduction and oxidation experiments in a thermogravimetric analyzer (TG). A gaseous (3 % H₂) fuel and a solid fuel (hard coal) were tested. Three-cycle CLC tests were carried out in the 600–800 °C temperature range and long-term testing was performed at 950 °C. A reactivity study showed that the natural sewage sludge ash sample was stable during the cycling TG tests when hydrogen was used as a fuel at all of the temperatures investigated. Strong temperature effects on the oxygen transport capacity were observed. An one-cycle test at 900 °C showed also that the sewage sludge ash successfully reacted with coal. The oxygen released was fully used for coal combustion, with appreciable reaction rate at temperature of ~750–800 °C, that is significantly lower than that obtained for pure Fe₂O₃-based oxygen carrier. The oxidation reaction was much faster than the reduction reaction. Moreover, the sewage sludge ash showed a low tendency toward agglomeration in the cyclic test, which was superior to the behavior of synthetic materials. The sewage sludge ash exhibited also high mechanical strength, an attrition index of 1 % and a high-temperature resistance of 1,170 °C in a reducing atmosphere. We conclude that sewage sludge ash can be effectively used as a low-cost, valuable oxygen carrier in practical application in chemical looping combustion technology for power generation.