Preparation and shape control of β-Ni(OH)<Subscript>2</Subscript> nano-particle

A simple and convenient method for the preparation of needle-shape nanoparticles of β-Ni(OH)₂ has been developed. Results show that a needle-shaped β-Ni(OH)₂ can be easily obtained in the presence of ethylenediamine and sodium dodecylbenzene sulfonate within a size from 100 to 200 nm. The shape and structure of the product were characterized by XRD, TEM and FT-IR. It is noteworthy that the formation of needle-shape β-Ni(OH)₂ benefits from the addition of sodium dodecylbenzene sulfonate. The optimum preparation conditions and the possible mechanism are also discussed.      

A green chemical route for the synthesis of Mn3O4 nanoparticles

A novel environmental friendly, room temperature route using an ionic liquid 1-n-butyl-3-methylimidazolium hydroxide ([BMIM]OH) for the synthesis of Mn₃O₄ nanoparticles is presented. The product was characterized using Fourier transform infrared spectroscopy, X-ray powder diffraction, and transmission electron microscopy. Phase purity was confirmed by XRD, and X-ray line profile fitting determined a crystallite size of 42 ± 11 nm. TEM analysis revealed various morphologies. EPR measurements have indicated the existence of long-range interactions, due to the wide range of particle sizes and morphologies observed.      

Synthesis and pharmacological properties of 3-(2-methyl-furan-3-yl)-4-substituted-Δ<Superscript>2</Superscript>-1,2,4-triazoline-5-thiones

By the reaction of 2-methyl-furan-3-carboxylic acid hydrazide with isothiocyanates, 1-[(2-methyl-furan-3-yl)carbonyl]-4-substituted thiosemicarbazides 1 were obtained. Further cyclization with 2% NaOH led to the formation of 3-(2-methyl-furan-3-yl)-4-substituted-Δ²-1,2,4-triazoline-5-thiones 2. The pharmacological effects of 2 on the central nervous system in mice were investigated. Strong antinociceptive properties of the investigated derivatives were observed in a wide range of doses.      

Influence of complexation on the composition of equilibrium phases in the system of Ce2(SO4)3-La2(SO4)3

The cocrystallization of Ce₂(SO₄)₃ and La₂(SO₄)₃ is studied in aqueous and H₂SO₄ (150 g/dm³) solutions at 25 °C and 64 °C. The effect of the formation of inner sphere sulfate complexes of the type LnSO ₄ ⁺ in determining the composition of the equilibrium phases is revealed.      

2-pyrrolidone - capped Mn<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocrystals

Water-soluble Mn₃O₄ nanocrystals have been prepared through thermal decomposition in a high temperature boiling solvent, 2-pyrrolidone. The final product was characterized with XRD, SEM, TEM, FTIR and Zeta Potential measurements. Average crystallite size was calculated as ∼15 nm using XRD peak broadening. TEM analysis revealed spherical nanoparticles with an average diameter of 14±0.4 nm. FTIR analysis indicated that 2-pyrrolidone coordinates with the Mn₃O₄ nanocrystals only via O from the carbonyl group, thus confining their growth and protecting their surfaces from interaction with neighboring particles.      

Indirect determination of lutetium by differential pulse anodic stripping voltammetry at a hanging mercury drop electrode

Lutetium has been determined by differential pulse anodic stripping voltammetry in an acidic solution containing Zn-EDTA. Lutetium (III) ions liberated zinc (II), which was preconcentrated on a hanging mercury drop electrode and stripped anodically, resulting in peak current linearly dependent on lutetium (III) concentration. Less than 0.4 ng mL⁻¹ lutetium could be detected after a 2 min deposition.      

Determination of active components in Chinese medicinal preparations by capillary electrophoresis

The determination of paeoniforin, paeonol, and censenoside Rg₁ in traditional Chinese medicinal preparations, Tze Po San Pien pills and Liuwen Dihuang pills has been investigated by micellar electrokinetic capillary electrophoresis with borate buffer (20 mM), sodium dodecylsulfate (30 mM) and acetonitrile (20%) as background electrolytes (pH 9.30), 20 kV applied voltage and 203 nm UV detection. The effects of SDS concentration, borate, buffer pH, and organic modifier on electrophoretic behavior and separation are discussed. Regression equations revealed linear relationships between the peak-area of each component and the content with the correlation coefficients from 0.9982 to 0.9999. In addition, the levels of the active compounds in two kinds of traditional Chinese medicinal preparations were easily determined with the recoveries from 93.1% to 108.2%.      

Investigation on the catalytic activity of doped low-percentage oxide catalysts Mn/ZnO obtained from oxalate precursor

The precursors with a low manganese content ≤ 0.07% Mn were synthesized by spontaneous crystallization from Zn²⁺, Mn²⁺ and C₂O₄ ²⁻-containing solutions. The initial ratio Zn²⁺:C₂O₄ ²⁻ = 1:1 and 1:2 influences the morphology and prevailing orientations of the crystallites in the oxalate samples. The presence of such small Mn content in the samples does not change the morphology or size of the crystals. The ZnO and Mn/ZnO oxides with manganese content from 0.51×10⁻² to 15.1×10⁻² Wt % are obtained after thermal decomposition of the oxalates. The oxides preserved the morphology of the precursors. The catalytic tests show that the pure ZnO has a poor activity for CO oxidation reaction. Its doping with Mn promotes the catalytic activity (up from twice to five times) in spite of the very low contents of the dopants. The observed increase of the activity depends on both dopant concentration and Zn²⁺:C₂O₄ ²⁻ ratio, probably due to the different mechanism of the manganese inclusion and different morphology of the oxides. The catalysts of the 1:2 series are more active in CO oxidation reaction.      

Synthesis, characterization and spectroscopic properties of some new phenylazo-6-aminouracil

In this study, a series of new 5-phenylazo-6-aminouracil dyes were prepared by linking m-,p-nitroaniline, m-,p-chloroaniline, m-,p-anisidine, m-,p-toluidine, m-,p-cyanoaniline, p-ethoxyaniline, p-phenoxyaniline, p-ethylaniline, p-acetamidoaniline, p-acetylaniline, p-carboxyaniline and aniline to 6-aminouracil. The prepared dyes were characterized by UV-vis, FT-IR, ¹H NMR spectroscopic techniques and elemental analysis. The effect of acid and base upon the UV-vis spectra of these dyes were investigated. In addition, the solvatochromic behaviors and substituent effects in various solvents were evaluated.      

Photocatalytic properties of Ru-doped titania prepared by homogeneous hydrolysis

Nanocrystalline titania particles doped with ruthenium oxide have been prepared by the homogenous hydrolysis of TiOSO₄ in aqueous solutions in the presence of urea. The synthesized particles were characterized by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), High Resolution Transmission Electron Microscopy (HRTEM), Selected Area Electron Diffraction (SAED) and Nitrogen adsorption-desorption was used for surface area (BET) and porosity determination (BJH). The photocatalytic activity of the Ru-doped titania samples were determined by photocatalytic decomposition of Orange II dye in an aqueous slurry during irradiation at 365 nm and 400 nm wavelengths.      

Phase transitions of K<Subscript>2</Subscript>TaF<Subscript>7</Subscript> within 680–800°C

Three thermal effects on heating/cooling of K₂TaF₇ in the temperature interval of 680–800°C were investigated by the DSC method. The values determined for the enthalpy change of the individual processes are: Δ_transIIH_m(K₂TaF₇; 703°C) = 1.7(2) kJ mol⁻¹, Δ_transIH_m(K₂TaF₇; 746°C) = 19(1) kJ mol⁻¹ and Δ_transIIIH_m(K₂TaF₇; 771°C) = 13(1) kJ mol⁻¹. The first thermal effect was attributed to a solid-solid phase transition; the second to the incongruent melting of K₂TaF₇ and the third to mixing of two liquids. These findings are supported by in situ neutron powder diffraction experiments performed in the temperature interval of 654–794°C.      

Ionic liquid promoted synthesis of bis(indolyl) methanes

1-benzyl-3-methyl imidazolium hydrogen sulphate [bnmim][HSO₄] was found to be an effective catalyst for the condensation reaction of indoles and derivatives with benzaldehydes in microwave irradiation with lower reaction time and higher yields to give bis(indolyl) methanes.      

Palladium-catalyzed amination of quinaldine-5-triflate

Palladium-catalyzed amination reactions of quinoline triflate and the effect of a Pd catalyst, its ligands, solvents, bases, and temperature were studied. This method facilitated an easier pathway for the preparation of aminoquinoline derivatives as potential precursors of new serotoninerg agents.      

Addition of TiO2 nanowires in different polymorphs for dye-sensitized solar cells

TiO₂ (B) and TiO₂ anatase nanowires were prepared at 150 °C for 120 h by a hydrothermal method followed by calcination in air at 400 °C for 2 h and at 700 °C for 2 h for TiO₂ (B) and TiO₂ anatase, respectively. Although dye-sensitized solar cells (DSC) with fully nanowire electrodes showed a rather low light-to-electricity conversion efficiency of 1.33 % for TiO₂ (B) and 2.42% for TiO₂ anatase, 10 wt % nanowire-dispersed electrodes in a P-25 TiO₂-nanoparticle matrix demonstrated improved efficiency of 6.17 % for TiO₂ (B) and 6.53% for TiO₂ anatase, these exceeding that of pure P-25 electrodes in this work (η=5.59%). The dominant mechanisms of the improvement at 10 wt% for the two different polymorphs are thought to be different, i.e., a light-scattering and film-thickness increment for the TiO₂ (B) system, whereas there is an improved conduction path through the matrix for the TiO₂ anatase system.      

Alkylation of ambident indole anion in ionic liquids

Alkylation of indole salts in different ionic liquids is reported. Ionic liquids increase the alkylation reaction rate of ambident indole anion and reduce the effects of counter ions and/or additives, the alkylation reaction rates being independent of the presence of small amounts of protic solvents or water.      

Thermal synthesis and characterization of Al χ La1-χ P3O9

New binary lanthanum-aluminum triphosphates were synthesized by thermal-condensation method from H₃PO₄, La₂O₃ and Al(OH)₃. These pigments could be potentially used as special inorganic pigments; their corrosion-inhibition properties were widely studied. Synthesis conditions were determined on the basis of DTA and TG measurements. The products were also characterized by X-ray diffraction analysis. Physical properties — density by pycnometric method, particle size distribution, oil number and critical pigment volume concentration (CPVC), pH and specific conductivity of their aqueous extracts were also determined.      

Influence of the addition of Pd and Cu to cobalt catalysts prepared by SMAI for F-T synthesis

The Co-Pd/SiO₂ and Co-Cu/SiO₂ catalysts were prepared via solvated metal atom impregnation (SMAI) method and investigated for the Fischer-Tropsch (F-T) synthesis. The catalysts contained 5wt.% Co and a weight ratio of Pd (or Cu) to Co of 1/30. XPS indicated that Co, Pd and Cu were in metallic state. The results of XPS and magnetic measurements showed that Co and Pd (Cu) were alloyed. The Co particles on the catalysts were very highly dispersed and they displayed superparamagnetic behavior. FT-IR indicated that the electrons shifted from Cu and Pd to Co. Catalytic tests showed that CO hydrogenation rates followed the order Pd-Co > Cu-Co > Co.      

Synthesis and isomerism of hydrazones of 2-(5-thioxo-4,5-dihydro-1,3,4-thiadiazol-2-ylthio)acetohydrazide

New hydrazones of 2-(5-thioxo-4,5-dihydro-1,3,4-thiadiazol-2-ylthio)acetohydrazide have been obtained and the percentages of anti/syn - conformers were determined. Based on the analyses of ¹H NMR spectra, it was concluded that for hydrazones obtained from the 2- hydroxybenzaldehydes and 2’-hydroxycetophenones the ratio between the anti-and syn-conformers depends on the strength of intramolecular hydrogen bond (IMHB) between the nitrogen atom of the imino group and the proton of the 2-hydroxy group. It was shown that increase in IMHB strength results in stabilization of the anti-conformer in solution.      

Preparation of nanostructured porous SiO2-Al2O3 oxycarbonitride materials obtained by a new chemical precursor method

Nanostructured hybrid materials containing Al₂O₃ were synthesized via a sol-gel method through hydrolysis and co-condensation reactions using trimethylsilyl isocyanate (TMSI) as a new silica source in the presence of tetramethoxysilane (TMOS) and three different quantities (10, 20 and 30 wt.%) of aluminum sec-butoxide (Al(OBu^sec)₃ as a modifying agent. The xerogel nanostructured materials are pyrolyzed in nitrogen atmosphere in the temperature range from 400°C to 1100°C. The transformation of the xerogel hybrid networks into Al-Si oxycarbonitride materials has been investigated by XRD, FTIR, SEM, AFM, and ²⁹Si MAS-NMR. To the best of our knowledge, the work reported here is the first synthesis of porous di-urethanesils modified with aluminum and one of the few examples of alumosilica oxycarbonitride materials      

Calorimetric study of melts in the System KF - K<Subscript>2</Subscript>NbF<Subscript>7</Subscript>

The relative enthalpies of melts in the system KF - K₂NbF₇ were measured by drop-calorimetry at the temperatures 1058, 1140 and 1208 K as a function of composition. Heat capacities of melted mixtures and enthalpies of mixing were determined using the experimental data. The molar heat capacity of melts diverges slightly from additivity. The molar enthalpy of mixing of melts shows small negative deviation from ideality which decreases with decreasing temperature. The thermal effect at mixing was assigned predominantly to association reactions producing more complex fluoroniobate anions.