Quality-by-design-based development and validation of a stability-indicating UPLC method for quantification of teriflunomide in the presence of degradation products and its application to in-vitro dissolution

A systematic design-of-experiments was performed by applying quality-by-design concepts to determine design space for rapid quantification of teriflunomide by the ultraperformance liquid chromatography (UPLC) method in the presence of degradation products. Response surface and central composite quadratic were used for statistical evaluation of experimental data using a Design-Expert software. The response variables such as resolution, retention time, and peak tailing were analyzed statistically for the screening of suitable chromatographic conditions. During this process, various plots such as perturbation, contour, 3D, and design space were studied. The method was developed through UPLC BEH C18 2.1?×?100?mm, 1.7-µ column, mobile phase comprised of buffer (5?mM K₂HPO₄ containing 0.1% triethylamine, pH 6.8), and acetonitrile (40:60 v/v), the flow rate of 0.5?mL?min^?1 and UV detection at 250?nm. The method was developed with a short run time of 1?min. Forced degradation studies revealed that the method was stability-indicating, suitable for both assay and in-vitro dissolution of a drug product. The method was found to be linear in the range of 28–84?µg?mL^?1, 2.8–22.7?µg?mL^?1 with a correlation coefficient of 0.9999 and 1.000 for assay and dissolution, respectively. The recovery values were found in the range of 100.1–101.7%. The method was validated according to ICH guidelines.     

Determination of Ranolazine in Rat Plasma by Liquid Chromatography–Electrospray Ionization Mass Spectrometry

A rapid and sensitive liquid chromatographic–mass spectrometric (LC–MS) method, with phenoprolamine hydrochloride (DDPH) as internal standard, has been developed and validated for determination of ranolazine in rat plasma. After liquid–liquid extraction the compound was analyzed by HPLC on a C₁₈ column, with methanol–10 mM ammonium acetate, 76:24 (v/v), as mobile phase, coupled with electrospray ionization mass spectrometry (ESI–MS). The protonated analyte was quantified by selected-ion monitoring (SIM) with a quadrupole mass spectrometer in positive-ion mode. Calibration plots were linear over the concentration range 0.046–12 μg mL⁻¹. Inter and intra-day precision (CV%) and accuracy (RE%) for quality-control samples (0.187, 1.5, and 12 μg mL⁻¹) ranged between 2.96 and 13.38% and between −11.23 and 12.67%, respectively. Extraction recovery of RAN from plasma was in the range 82.77–86.54%. The method enables rapid, sensitive, precise, and accurate measurement of the concentration of ranolazine in rat plasma.     

HPLC and UPLC Methods for the Simultaneous Determination of Enalapril and Hydrochlorothiazide in Pharmaceutical Dosage Forms

High efficiency and less elution are the basic requirements of high-speed chromatographic separation. In this study, a new gradient reverse phase chromatographic methods were developed using HPLC and UPLC systems for simultaneous determination of enalapril maleate (ENL) and hydrochlorothiazide (HCZ) in pharmaceutical dosage forms. The chromatographic separations of ENL and HCZ were achieved on a Waters μ-Bondapak C 18, (300 × 3.9 mm, 10 μm) and Waters Acquity BEH C18 (100 × 2.1 mm, 1.7 μm) columns for HPLC within 5.30 min and UPLC within a short retention time of 1.95 min, respectively. A linear response was observed over the concentration range 0.270–399 μg mL^?1 of ENL, 0.260–399 μg mL^?1 of HCZ for HPLC system and 0.270–399 μg mL^?1 of ENL and 0.065–249 μg mL^?1 of HCZ for UPLC system. Also, limit of detection for ENL was 1.848 ng mL^?1 and 31.477 ng mL^?1 for HCZ, 2.804 ng mL^?1 for ENL and 2.943 ng mL^?1 for HCZ using HPLC and UPLC, respectively. The proposed methods were validated according to ICH guideline with respect to precision, accuracy, and linearity. Forced degradation studies were also performed for both compounds in bulk drug samples to demonstrate the specificity and stability indicating power of the HPLC method. Comparison of system performance with conventional HPLC was made with respect to analysis time, efficiency, and resolution.     

Determination trace amounts of thallium after separation and preconcentration onto nanoclay loaded with 1-(2-pyridylazo)-2-naphthol as a new sorbent

A procedure has been proposed for the separation and preconcentration of trace amounts of thallium. It is based on the adsorption of thallium ions onto organo nanoclay loaded with 1-(2-pyridylazo)-2-naphthol (PAN). Thallium ions were quantitatively retained on the column in the pH range of 3.5–6.0, whereas quantitative desorption occurs with 5.0?mL of 5% ascorbic acid and thallium was determined by flame atomic absorption spectrometry. Linearity was maintained between 0.66?ng?mL^?1–15.0?µg?mL^?1?in initial solution. Detection limit was 0.2?ng?mL^?1?in initial solution and preconcentration factor was 150. Eight replicate determinations of 2.0?µg?mL^?1 of thallium in final solution gave a relative standard deviation of ±1.48%. Various parameters have been studied, such as the effect of pH, breakthrough volume and interference of a large number of anions and cations and the proposed method was used to determine thallium ions in water and standard samples. Determination of thallium ions in standard sample showed that the proposed method has good accuracy.     

Determination of Toluene and Ethanol in Urine by Headspace and Cryotrapping Gas Chromatography–Mass Spectrometry

Toluene is the major volatile organic compound found in glue and is often used as a hallucinogenic for abusers. Use with alcohol increases the risk of adverse effects from toluene exposure. In this study, a headspace and cryotrapping gas chromatography–mass spectrometry method was developed and validated for the determination of toluene and ethanol in urine. Experimental and instrumental variables were investigated to optimize the method for sensitivity. Excess sodium sulfate was used as the salting-out reagent before the headspace protocol. Linear least squares regression with a 1/x weighting factor was used to construct calibration curves from 0.002 to 0.4?µg?mL^?1 for toluene and 10 to 2000?µg?mL^?1 for ethanol. The correlation coefficients exceeded 0.9993. The limits of detection were 0.0005?µg?mL^?1 for toluene and 0.21?µg?mL^?1 for ethanol. Intraday and interday precisions were within 5.4 and 11.5%, while intraday and interday accuracies were between ?11.3 to ?4.0% and ?11.0 to 1.2%, respectively. The method validation results for selectivity and stability were satisfactory. The validation results were used to estimate the expanded uncertainty and the contribution of individual steps in the method for the quantification of toluene and ethanol. The relative expanded uncertainties were 14.1% for toluene and 4.6% for ethanol.     

Determination of Belotecan in the Plasma,Bile, and Urine of Rats by High-Performance Liquid Chromatography with Fluorescence Detection and Its Application to a Pharmacokinetic Study

Abstract

A simple and reliable high-performance liquid chromatographic (HPLC) method was developed for the determination of belotecan in the plasma, urine, and bile samples of rats. Belotecan was analyzed with HPLC using a C18 column with fluorescence detector. A mixture of acetonitrile–0.1 M potassium phosphate buffer at pH 2.4 (25:75, v/v) and 0.2% trifluoroacetic acid was used as the mobile phase. The lower limits of quantitation (LOQ) were 5 ng mL^?1 for the plasma and 5 µg mL^?1 for the urine and bile samples. The method has been readily applied for the routine pharmacokinetic study of belotecan in small laboratory animals.     

Rapid Low-Cost Determination of Lead(II) in Cassava by an iPod-Based Digital Imaging Colorimeter

An iPod-based digital image colorimeter was developed for the determination of lead(II) in cassava. The method is based on the color values of a lead(II) solution following its reaction with dithizone. Lead(II) from cassava was extracted using an ultraviolet-digestion unit followed by the color-forming reaction and image capture using the ColorConc application operated on an iPod touch. The concentration was predicted by comparing the color values with those collected in a database. The time needed for complete digestion was 30?min. The determined concentrations of lead(II) were from 0.10 to 1.00?µg mL^?1. The limits of detection and quantitation were 0.0120 and 0.0399?µg mL^?1, respectively. The recovery values were 105?±?7.07% and 109?±?6.61% at 0.2?µg mL^?1 and 0.4?µg mL^?1 lead(II) (n?=?5). The reported method was demonstrated to be simple, accurate, rapid, precise, and low cost.     

Spectrophotometric Determination of Zinc in Pharmaceutical and Biological Samples with Di‐2‐pyridyl Ketone Benzoylhydrazone: a Simple,Fast, Accurate and Sensitive Method

Abstract

A simple, fast, accurate, and sensitive spectrophotometric method was developed to determine zinc(II). This method is based on the reaction of Zn(II) with di‐2‐pyridyl ketone benzoylhydrazone (DPKBH), at pH=5.5 and 50% (v/v) ethanol. Bee?s law was obeyed in the range 0.020–1.82 µg mL^?1 with a molar apsorptivity of 3.64×10⁴ L mol^?1 cm^?1, and a detection limit (3δ) of 2.29 µg L^?1. The action of some interfering ions was verified and the developed method applied to pharmaceutical and biological samples. The results were then compared with those obtained by using a flame atomic absorption technique.     

The Development and Validation of a Stability-Indicating UHPLC-DAD Method for Determination of Perindopril l-Arginine in Bulk Substance and Pharmaceutical Dosage Form

A stability-indicating ultra-high-performance liquid chromatography (UHPLC) method with a diode array detector was developed and validated for the determination of cis/trans isomers of perindopril l-arginine in bulk substance and pharmaceutical dosage form. The separation was achieved on a Poroshell 120 Hilic (4.6 × 150 mm, 2.7 µm) column using a mobile phase composed of acetonitrile–0.1 % formic acid (20:80 v/v) at a flow rate of 1 mL min^?1. The injection volume was 5.0 µL and the wavelength of detection was controlled at 230 nm. The selectivity of the UHPLC-DAD method was confirmed by determining perindopril l-arginine in the presence of degradation products formed during acid–base hydrolysis and oxidation as well as degradation in the solid state, at an increased relative air humidity and in dry air. The method’s linearity was investigated in the ranges 0.40–1.40 µg mL^?1 for isomer I and 0.40–2.40 µg mL^?1 for isomer II of perindopril l-arginine. The UHPLC-DAD method met the precision and accuracy criteria for the determination of the isomers of perindopril l-arginine. The limits of detection and quantitation were 0.1503 and 0.4555 µg mL^?1 for isomer I and 0.0356 and 0.1078 µg mL^?1 for isomer II, respectively.     

SPMMTE and Q-TOF–UPLC–MS for monitoring of atenolol and atorvastatin in human plasma using pentafluoro phenyl column

Iron nanocomposite adsorbent was prepared by green technology with 90% yield. The prepared iron nanocomposite adsorbent was used in solid-phase micromembrane tip extraction (SPMMTE) sample preparation technique. Analysis of atenolol and atorvastatin was performed in human plasma using SPMMTE and Q-TOF–UPLC–MS methods. New generation Acquity UPLC HSS penta fluoro phenyl (2.1?×?75?mm²; 1.8?µm) column was used with acetonitrile–0.1% formic acid in water (50:50 v/v) as mobile phase. The flow rate was 0.2?mL?min^?1 with electrospray mass detection. The limits of detection were 0.2 and 0.4?ng active mass for atenolol and atorvastatin, while the limits of quantification were 1.0 and 2.0?ng active mass, respectively. The values of the retention times were 3.224 and 3.907 for atorvastatin and atenolol. The values of the separation and resolution factors were 1.31 and 1.71, respectively. The peaks were sharp with base lined separation within 4.2?min. The developed SPMMTE and Q-TOF–UPLC–MS methods were reproducible, fast, precise, robust, rugged, and economic for the analyses of atenolol and atorvastatin in human plasma. The reported methods can be applied for monitoring of the reported drugs at trace level.     

Miniaturized flow-injection-analysis (μFIA) system with on-line chemiluminescence detection based on the luminol-hypochlorite reaction for the determination of ammonium in river water

A miniaturized flow-injection-analysis system constructed from glass and polydimethylsiloxane was employed for the determination of ammonium in river water. The sample was filtered and delivered to the reactor chip electro-osmotically using a disposable fritted capillary, while reagents were delivered to the system by gravity. Ammonia was mixed with the hypochlorite, to form a monochloramine. Once the alkaline luminol (3-aminophthalhydrazide) was delivered to the system, it was oxidized by the unconsumed hypochlorite emitting a bright blue light (λ _max?～?440?nm) that was detected using a miniaturized photomultiplier tube (PMT) located directly under the chip. The calibration model for ammonium standards was linear up to 0.1?µg?mL^?1 (y?=??8.96x?+?1.02; correlation coefficient, r ²?=?0.9715) over a working range of 0.0–0.5?µg?mL^?1. A detection limit of 10?±?6?µg?mL^?1 was achieved with a precision value of (RSD ≤ 6.4%), for n?=?5. A direct and standard addition method were used to determine the concentration of ammonium in a river-water sample (from the Humber Estuary, UK) which was found to be 0.075?±?0.005?µg?mL^?1, with a precision value of (RSD?≤?3.7%), for n?=?9. The results obtained showed good agreement with the average concentration 0.065?µg?mL^?1 (provided by the local environmental agency), for the analysis of ammonia at different sample points on the estuary.     

Differential pulse polarographic behaviour of thiazopyr herbicide and application to its determination in fruit juice and soil samples

A differential pulse polarographic method for the determination of the herbicide thiazopyr has been developed. The polarographic study of thiazopyr exhibited two well-defined cathodic peaks within the pH range of 1.0 to 8.0. The variation of pH and polarographic parameters indicated that the optimum conditions under which thiazopyr could be reduced were a pH 7.0 BR buffer solution, a reduction peak potential of ?1270 mV (vs. SCE), scan rate of 5 mV s^?1, pulse amplitude of 50 mV with pulse duration of 50 ms at an ambient temperature of 25 ± 3°C. The main reduction peak was characterised by cyclic voltammetry as being irreversible and diffusion-controlled. A linear relationship between the peak current and the concentration of thiazopyr was obtained in the range of 0.43–38.6 µg mL^?1, with a detection limit of 0.127 µg mL^?1. The proposed method was successfully applied to the determination of thiazopyr in spiked fruit juice and soil samples. The mean recoveries of the 19.8 µg g^?1 and 3.96 µg mL^?1 thiazopyr spiked to soil and orange juice were 20.2 ± 1.0 µg g^?1 and 3.84 ± 0.12 µg mL^?1, at 95% confidence level, respectively. The sufficiently good recoveries and low relative standard deviation (RSD) data confirm the high accuracy and precision of the proposed method. The interferences effects of several commonly used pesticides and inorganic species were also studied. Interfering effects were eliminated either by providing selectivity with pH, or using EDTA as complexing agent.     

A comparative study of HPLC-UV and UPLC-DAD methods for simultaneous estimation of aspirin and cilostazol in the presence of their related impurities in bulk and capsules

Aspirin (ASP) and cilostazol (CST) are used as a combination in pharmaceutical formulations for treatment of strokes. Salicylic acid (SAL) is considered to be one of the main synthesis impurities and a degradation product of ASP. On the other hand, the main related impurities of CST are CST related A, B, and C (CST-RA, CST-RB, and CST-RC), respectively. Furthermore, as high efficiency and less elution are the basic requirements of high-speed chromatographic separation, so, a comparative study of two simple, precise, and accurate reversed-phase HPLC and UPLC methods was developed and validated for simultaneous estimation of ASP and CST in bulk and capsules in the presence of SAL, CST-RA, CST-RB, and CST-RC. A Eurospher II C18 (250?×?4.6?mm², 5?µm) for HPLC method and an Agilent Zorbax Eclipse Plus C18 (50?×?2.1?mm², 1.8?µm) for UPLC method were used. A gradient mobile phase of 20?mM anhydrous KH₂PO₄ buffer solution (containing 0.2% triethylamine (TEA), v/v) with pH adjusted to 2.9 using orthophosphoric acid (solution A) and acetonitrile (solution B) mixed in different proportions for HPLC and UPLC methods was prepared. Flow rate was set to 1.0 and 0.3?mL min^?1 for HPLC and UPLC methods, respectively, and the detection was performed for both methods at 210?nm. It worth noting that the proposed UPLC-DAD assay exhibited relatively much more precision, sensitivity, specificity, and economic and chromatographic separation superiority than proposed HPLC-UV assay. Both developed methods were compared with reference methods to prove its applicability and are suitable for purity assessment of ASP and CST in bulk and capsules.     

Validated HPTLC and HPLC methods for determination of fluorometholone and sodium cromoglycate in presence of their impurities and degradation products; application to kinetic study and on rabbit aqueous humor

Fluorometholone (FLM) and Sodium Cromoglycate (CMG) are co-formulated in ophthalmic preparation and showed marked instability under different conditions. Two specific, sensitive and precise stability-indicating chromatographic methods have been developed and validated for their determination in the presence of their degradation products and FLM impurity. Ten components were efficiently separated by them. The first method was HPTLC-spectrodensitometry, where the separation was achieved using silica gel 60?F₂₅₄ HPTLC plates and developing system of ethyl acetate: methanol (9:1, v/v). The second method was a reversed phase HPLC associated with kinetic study of the degradation process and was successfully applied for determination of the studied compounds in spiked rabbit aqueous humor. The mobile phase was acetonitrile: methanol: 0.05?M potassium dihydrogenphosphate (0.1% trimethylamine); pH 2.5, adjusted with orthophosphoric acid (20: 30: 50, by volume). In both methods, the separated components were detected at 240?nm and system suitability was checked. Good correlation was obtained in the range of 0.10–24.00 and 0.20–48.00?µg band^?1, for FLM and CMG by HPTLC. While for HPLC, the linearity ranges from 0.01–50.00 and 0.05–50.00?µg?mL^?1 for both drugs. The methods were applied in pharmaceutical formulation, where they were compared to the reported method with no significant difference.     

A sensitive RP-HPLC method for estimation of artemether from polymeric nanoparticles after pre-column acid treatment using UV-visible detector

Abstract

Artemether; a sesquiterpene lactone is widely used for the treatment of malaria as artemisinin-based combination therapy (ACT). The present work involves the development and validation of sensitive reversed-phase high-performance liquid chromatography (RP-HPLC) method for quantification of artemether (ART) in polymeric nanoparticles. ART was transformed to α, β-unsaturated decalones by pre-column acid treatment to enhance the sensitivity of chromophoric group lacking ART for quantification by HPLC-UV. Waters Spherisorb^® 5?µm ODS(C18) column (4.6*250?mm) with gradient elution by mobile phase comprising of ACN and PBS (10?mM; pH 6.0) was used to separate acid-treated ART. The analysis was carried at λ_max of 253?nm with 20?min and 20?µL run time and injection volume, respectively. The method was found to be linear in the concentration range of 0.5–10?µg mL^?1 with 0.09?µg mL^?1 and 0.27?µg mL^?1 as LOD and LOQ respectively. Further, the method was also found to be specific for ART in presence of blank polymeric nanoparticles, accurate (% average recovery rate 101.7?±?1.68%), precise (RSD <2%), and robust. The method was successfully used to determine % entrapment efficiency and in vitro release of ART-loaded polymeric nanoparticles with HPLC using a UV-visible detector.     

Development of a Validated HPLC Method for Analysis of Astragaloside II, Paeonol, and Osthole in Snake Wine

A gradient-elution RP-HPLC method has been established for simultaneous determination of astragaloside II, paeonol, and osthole in the snake wine. The compounds were separated on a Polaris C₁₈ column (150 mm × 4.6 mm i.d., 5-µm particles); compounds were eluted with a gradient prepared from acetonitrile and 0.01 M phosphate buffer, pH 6.8. The detection wavelengths were 205, 274, and 323 nm from 0–10 min, 10–13 min, and 13–20 min, respectively. Linear quantitative calibration plots were obtained over the concentration ranges 2–200 µg mL^?1 for astragaloside II and 0.1–50 µg mL^?1 for paeonol and osthole. Average recoveries for astragaloside II, paeonol, and osthole were 96.32%, 96.89%, and 97.12%, respectively, and the respective RSD were 1.45%, 1.13%, and 1.17%. The method was found to be precise with RSD values in the ranges 0.87–1.91% for intra-day assays and 1.03–2.43% for inter-day assays. This method was efficient with high reproducibility and accuracy. Different batches of snake wine were analyzed by use of the method.     

Colorimetric Determination of Lead Using Gold Nanoparticles

A combined homogeneous assay and colorimetric determination method using gold nanoparticles was developed for rapid determination of lead(II) in contaminated natural waters. The presence of lead(II) in the colloidal gold suspension causes a change in the absorbance of the suspension. An increase in the absorption property at 595 nm is accompanied by a change in the size of the gold nanoparticles. High concentrations of lead cause aggregation of the gold colloids. Colloidal gold nanoparticles were synthesized using tannic acid as the reducing agent; this reagent allowed selective determination of lead in 10 µL of water, with a detection limit of 310 ng mL^?1 with an analysis time of 5 min. The coefficient of variation for lead(II) within the working range of the assay (520 ng mL^?1–13 µg mL^?1) varied from 1.3% to 9.2%. The limit of detection using this method with a sample volume of 50 µL was 60 ng mL^?1. The coefficient of variation for lead over the working range of the determined concentrations (80 ng mL^?1–25 µg mL^?1) varied from 0.2% to 9.3%, while the values for the inter-day assay (n = 8) were less than 10%. The method was employed for the analysis of river, lake, marsh, and spring water; the recovery of lead was determined to be 72.5%–130% for 10 µL of water and 93.6%–114.7% for 50 µL.     

Quantification of Doxorubicin in Pegylated Polymer Micelles in Rat Plasma by Methanol Precipitation�CUltrasonic Emulsion Breaking Method and UPLC�CMS�CMS

This study established a new methanol precipitation?Cultrasonic emulsion breaking method for extraction of doxorubicin from polymeric micelles and developed a UPLC?CMS/MS method for the determination of doxorubicin in rat plasma. The emulsion breaking efficiency of methanol is up to 99.2%. The plasma samples were analyzed by UPLC/MS/MS using positive electrospray ionization mode in the multiple-reaction monitoring (MRM) mode. The calibration curves were linear over the range 5?C1,000 ng mL^?1 with the lower limit of quantification of 5 ng mL^?1. The intra- and inter-day precisions of QC samples were all <10.0%. The chromatographic separation was 2.5 min. The developed method was successfully applied to a pharmacokinetic study of doxorubicin in rats following intravenous administration.     

Chemical modification of alumina surface by immobilization of 1-((5-nitrofuran-2-yl)methylene)thiosemicarbazide for extractive concentration of silver ions

A column, solid phase extraction (SPE), preconcentration method was developed for determination of silver by using alumina coated with 1-((5-nitrofuran-2-yl)methylene)thiosemicarbazide and determination by flame atomic absorption spectrometry. The separation/preconcentration conditions for the quantitative recovery were investigated. At pH 2, the maximum sorption capacity of Ag⁺ was 7.5?mg?g^?1. The linearity was maintained in the concentration range of 0.02–11.0?µg?mL^?1 in the final solution or 0.14–1.10?×?10^4?ng?mL^?1 in the original solution for silver. The preconcentration factor of 140 and relative standard deviation of ±1.4% was obtained, under optimum conditions. The limit of detection (LOD) was calculated as 0.112?ng?mL^?1, based on 3σ_bl/m (n?=?8) in the original solutions. The proposed method was successfully applied to the determination trace amounts of silver in the environmental samples such as tea, rice and wheat flour, mint, and real water samples.     

Simultaneous Determination of Cimetidine and Related Compounds in Pharmaceuticals by HPLC on a Porous Graphitic Carbon Column

A high-performance liquid chromatographic method has been developed for determination of cimetidine and its main related compounds, 4-hydroxymethyl-5-methylimidazol (MH), N-cyano-N',N''-dimethylguanidine (Carbonate), 1-methyl-3-[2-[[(5-methyl-1H-imidazol-4-yl)methyl]sulfonyl]ethyl]guanidine (Guanidine), 2-cyano-1-methyl-3-[2-[[(5-methyl-1H-imidazol-4-yl)methyl]sulfonyl] (Sulfoxide), and 1-[(methylamino)[[2-[[(5-methyl-1H-imidazol-4-yl)methyl]sulfonyl]ethyl]amino]methylene]urea (Amide). Chromatographic separation was achieved on a porous graphitic carbon (PGC) column with a gradient 17:83 to 19:81 (v/v) acetonitrile-0.05 M potassium phosphate buffer containing 0.40% pentane sulfonic acid at pH 2.5. Analysis was performed at a flow-rate of 1 mL min^?1 and the detection wavelength was 228 nm. Calibration plots were linear in the concentration ranges 0.25 to 83 µg mL^?1 for cimetidine and Carbonate, 0.25 to 75 µg mL^?1 for Guanidine, Amide, and Sulfoxide, and 0.25 to 100 µg mL^?1 for MH, with correlation coefficients (R ²) between 0.9990 and 0.9998. The lowest detectable concentration of cimetidine and Amide was 0.07 µg mL^?1; for MH, Carbonate, Guanidine, and Sulfoxide it was 0.06 µg mL^?1. Method repeatability (intraday) and reproducibility (interday) was always less than 2% (n=5). The proposed liquid chromatographic method was successfully used for analysis of commercially available cimetidine dosage forms; recoveries were from 99.2 to 100.8%.