Evaluation of gardenia yellow using crocetin from alkaline hydrolysis based on ultra high performance liquid chromatography and high‐speed countercurrent chromatography

Gardenia yellow is globally the most valuable spice and food color. It is generally a mixture of water‐soluble carotenoid glycosyl esters which consist of crocetin bis(gentiobiosyl) ester as the main component. Crocetin is a natural carotenoid dicarboxylic acid that may be a candidate drug for pharmaceutical development, however, it is either present in trace amounts or is absent in natural gardenia yellow products. We here propose that crocetin produced by alkaline hydrolysis can be used to qualitatively evaluate gardenia yellow products using an ultra high performance liquid chromatographic assay. A useful and efficient isolation technique for isolating high‐purity crocetin from gardenia yellow using high‐speed countercurrent chromatography is described. High‐speed countercurrent chromatographic fractionation followed by an ultra high performance liquid chromatographic assay showed that trans‐crocetin is easily converted to about 15% cis‐crocetin (85% trans‐crocetin). Crocetin in gardenia yellow was quantitatively evaluated. Our approach is based on the hydrolysis process for converting crocetin glycosyl esters to crocetin before evaluation and isolation using the ultra high performance liquid chromatographic and high‐speed countercurrent chromatographic methods. The combination of hydrolysis and chromatographic methods allows evaluation of the purity and quantity of crocetin in gardenia yellow.     

Formation mechanism of solvent induced artifact arising from chromatographic purity testing of γ-irradiated chloramphenicol

Summary Different γ-irradiated chloramphenicol (CAP) samples were screened for impurities by recording melting point, solubility, pH and occurrence of additional spots on thin-layer plates according to the European Pharmacopoeia. Significant decomposition was detected as an intense spot in the TLC-test. The spot (r _f 0.7) which had an intensity >5% of the educt spot, depending on the irradiation dose, was eluted and concentrated from preparative TLC plates. The structure was confirmed by IR and¹H or¹³C-NMR and determined as the cyclic ketale condensation product of acetone and chloramphenicol. Formation of this by-product, which is acid-catalyzed, was determined as an artifact arising from purity testing. Not the τ-irradiation procedure itself but traces of acid in combination with acetone as the TLC solvent led to this condensation product which is especially detectable for small levels of protons (ca. 10⁻⁴ mol L⁻¹) stemming from hydrolysis of CAP or decomposition of residual solvents (CHCl₃) at low irradiation doses (8 kGy). Substitution of acetone by methanol solvent avoids this and misleading artifact from chromatographic purity investigations.     

A Reinvestigation of the Dichlorination of Thymidine

The reaction of thymidine with thionyl chloride in HMPA, reported¹ to give pure 1-(3,5-dichloro-2,3,5-trideoxy-β-D-threo-pentofuranosyl)thymine, has been found to give a mixture of erythro and threo isomers. Upon reacting thymidine with thionyl chloride, according to the literature procedure,¹ a product was isolated which melted 138–141°C [reported¹ 138–140°C] and gave one spot in CHCl₃/ETOH (4:1) on Eastman silica gel sheets at R_f=0.6 [reported¹ one spot at R_f=0.7 on Baker silica gel sheets]. However, the TLC of the product in neat ethyl acetate or CHCl₃/MeOH (9:1) gave two spots. A sample was separated into pure components by flash chromatography².     

Development of an HPTLC‐based diagnostic method for invasive aspergillosis

A rapid, sensitive and specific high‐performance thin‐layer chromatographic (HPTLC) method was developed and validated for determination of gliotoxin in Aspergillus infected immunocompromised patients with invasive aspergillosis (IA). Densitometric analysis of gliotoxin was carried out in the absorbance mode at 254 nm after single‐step extraction with chloroform. The method uses TLC aluminum plates pre‐coated with silica gel 60F‐254 as a stationary phase and toluene–isoamyl alcohol–methanol (10:0.5:0.5, v/v/v) as mobile phase, which gives compact spot of gliotoxin (R_f = 0.51). The calibration curve was linear (r² ≥ 0.994) between peak area and concentration in the tested range of 100–1000 ng spot^?1 with minimum detectable range 0.025 ng μ^?1 of serum sample. The mean ± SD value of slope and intercept of the standard chromatogram of gliotoxin were found to be 523.2 ± 1.555635 and 915.8 ± 30.68843, respectively. The developed method is simple, rapid, precise and less costly than earlier diagnostic methods, and different serum samples can be run on a single TLC plate for comparative analysis. The proposed method can be used to analyze gliotoxin in patient serum for easy, rapid and cost‐effective diagnosis of IA. Copyright © 2009 John Wiley & Sons, Ltd.     

Stability indicating high-performance thin-layer chromatographic determination of nelfinavir mesylate as bulk drug and in pharmaceutical dosage form

A sensitive, selective, precise and stability indicating high-performance thin-layer chromatographic method of analysis of nelfinavir mesylate both as a bulk drug and in formulations was developed and validated. The method employed TLC aluminium plates precoated with silica gel 60F-254 as the stationary phase. The solvent system consisted of toluene-methanol-acetone (7:1.5:1.5, v/v/v). This system was found to give compact spots for nelfinavir mesylate (R_f value of 0.45±0.02). Nelfinavir mesylate was subjected to acid and alkali hydrolysis, oxidation, dry heat treatment and photodegradation. Also the peaks of degraded products were well resolved from the pure drug with significantly different R_f values. Densitometric analysis of nelfinavir mesylate was carried out in the absorbance mode at 250 nm. The linear regression analysis data for the calibration plots showed good linear relationship with r²=0.999±0.002 in the concentration range of 1000-6000 ng per spot. The mean value of correlation coefficient, slope and intercept were 0.999±0.002, 0.014±0.001 and 21.73±1.26, respectively. The method was validated for precision, robustness and recovery. The limits of detection and quantitation were 60 and 140 ng per spot, respectively. Statistical analysis proves that the method is repeatable and selective for the estimation of the said drug. As the method could effectively separate the drug from its degradation products, it can be employed as a stability indicating one.     

Selective Densitometric Analysis of Cephalosporins Using Dragendorff’s Reagent

A simple, selective, precise, and stability-indicating thin-layer chromatographic method has been developed and validated for analysis of the cephalosporins cefpodoxime proxetil, ceftriaxone sodium, ceftazidime pentahydrate, cefotaxime sodium, cefoperazone sodium, cefazolin sodium, and cefixime in the bulk drug and in pharmaceutical formulations. TLC was performed on aluminium sheets precoated with silica gel G 60F₂₅₄ as stationary phase. The mobile phases chosen for development gave compact spots for all the drugs (R _F values 0.43–0.60). The separated compounds were visualized as orange spots by spraying with Dragendorff’s reagent. Linear regression analysis data for the calibration plots revealed good linear relationships between response and amounts of the drugs with correlation coefficients ranging from 0.9977 to 0.9998 and determination coefficients ranging from 0.9954 to 0.9996 over the concentration ranges 5–25 μg per spot for cefpodoxime proxetil, ceftriaxone sodium, and ceftazidime pentahydrate and 10–50 μg per spot for cefotaxime sodium, cefoperazone sodium, cefazolin sodium, and cefixime. The method was validated for precision, recovery, and robustness. Limits of detection and quantitation for the drugs ranged from 0.35 to 2.48 and from 1.07 to 7.50 μg per spot, respectively. The method was successfully applied to analysis of the drugs in their pharmaceutical dosage forms with good precision and accuracy. The method can also be used as a stability-indicating assay.     

Thin-layer chromatography with high-boiling mobile phase. part 2: Effect of temperature on retention characteristics in TLC with high-boiling mobile phases

A study has been undertaken on the effect of temperature on retention characteristics in thin-layer chromatography (TLC) with low-volatility mobile phases (MP). It is shown that temperature variations in TLC in melts bring about variations in both the relative retention values and, in some cases, in the order of migration of the chromatographic zones across the layer. The variation in the capacity factor k' with temperature agrees well with Martin's equation. To explain the temperature dependence of R_f one must, in general, take into account the variations with temperature in both the partition coefficient and the phase ratio. To describe the variation in R_f with temperature in TLC with low-volatile MP one can use an approximate equation in which In R_f is a linear function of 1/T. The experiments indicate that temperature is a major factor in TLC in melts.     

A degradation study of cefepime hydrochloride in solutions under various stress conditions by TLC–densitometry

A rapid, accurate and sensitive thin‐layer chromatography (TLC) method with densitometric detection has been developed and validated for the determination of cefepime in pharmaceuticals. Chromatographic separation was achieved on a silica gel TLC F₂₅₄ plates with a mobile phase consisting of ethanol–2‐propanol–glacial acetic acid 99.5%–water (4:4:1:3, v/v). Densitometric detection was carried out at wavelength of 266 nm in reflectance/absorbance mode. The validation of the method was found to be satisfactory with high accuracy (from 99.24 to 101.37%) and precision (RSD from 0.06 to 0.36%). Additionally, the stability of cefepime in solution was investigated, including the effect of pH, temperature and incubation time. Favorable retention parameters (R_f, R_s, α) were obtained under the developed conditions, which guaranteed good separation of the studied components. The degradation process of cefepime hydrochloride was described by kinetic and thermodynamic parameters (k, t_0.1, t_0.5 and E_a). Moreover, the chemical properties of degradation products were characterized by the R_f values, absorption spectra, HPLC‐MS/MS and TLC‐densitometry analysis. As the method could effectively separate the active substance from its main degradation product (1‐methylpyrrolidine), it can be employed as a method to indicate the stability of this drug. Copyright © 2014 John Wiley & Sons, Ltd.     

Development and validation of TLC‐densitometric method for determination of lipid A adjuvant as a bulk and in solid fat nanoemulsions

A simple, sensitive, selective and precise high‐performance thin‐layer chromatographic method was developed for determination of lipid A (MPLA) adjuvant as a bulk and in solid fat nanoemulsions. Chromatographic separations were performed on thin‐layer chromatography aluminum plates precoated with silica gel 60 F‐254 as stationary phase and chloroform–methanol–ethyl acetate solution (10:2:4, v/v/v) as mobile phase. With this solvent system, compact spots for MPLA at R_f value 0.80 ± 0.02 were obtained. Densitometric analysis of MPLA was carried out in absorbance mode at 357 nm. Linear regression analysis for the calibration plots showed good linear relationship with r = 0.9996 in the concentration range of 20–100 ng/spot. The mean values (±SD) of slope and intercept were found to be 7.355 ± 0.006 and 109.52 ± 0.170, respectively. Limits of detection (LOD) and quantitation (LOQ) were observed at 3.096 and 9.382 ng/spot, respectively.The method was validated for precision, accuracy, robustness and recovery as per the International Conference on Harmonization guidelines. Statistical analysis proved that the developed method for quantification of MPLA as a bulk and in solid fat nanoemulsions is reproducible, selective and economical. This method could be applied for quantitative assay of MPLA in lipid‐based vaccine formulations. Copyright © 2015 John Wiley & Sons, Ltd.     

Stability-indicating high performance thin layer chromatographic determination of sulfanilamide in human urine

A simple, sensitive, selective, precise and stability-indicating high-performance thin-layer chromatographic (HPTLC) method was developed and applied to human urine for the densitometric determination of sulfanilamide. A mixture of chloroform-ethyl acetate-xylene (2.5: 4.0: 1.0, v/v/v) was used as a mobile phase. The system was found to give compact spots for sulfanilamide (retardation factor, R _f = 0.21±0.02). The linear regression analysis data for the calibration plots showed good linear relationship with r ² = 0.9970 ± 0.0003 and r ² = 0.9947 ± 0.020 within the concentration range of 50–250 ng per spot and 100–1000 ng per spot with respect to peak area, respectively. The limit of detection (LOD) and quantification (LOQ) were 8 and 25 ng per spot, respectively. Sulfanilamide was subjected to acid and alkali hydrolysis, oxidation, dry heat and wet heat treatment. According to the International Conference on Harmonization (ICH) guidelines the method was validated for precision, recovery and robustness. The ultraviolet (UV) spectra of the degradation products which had different spectra from sulfanilamide were also recorded. The article is published in the original.     

Stability-Indicating Chromatographic Methods for Simultaneous Determination of Mosapride and Pantoprazole in Pharmaceutical Dosage Form and Plasma Samples

Simple, sensitive, selective, precise, and stability-indicating thin-layer chromatography (TLC) and high-performance liquid chromatography (HPLC) methods for the determination of mosapride and pantoprazole in pharmaceutical tablets were developed and validated as per the International Conference on Harmonization guidelines. The TLC method employs aluminum TLC plates precoated with silica gel 60F₂₅₄ as the stationary phase and ethyl acetate/methanol/toluene (4:1:2, v/v/v) as the mobile phase to give compact spots for mosapride (R _f 0.73) and pantoprazole (R _f 0.45) separated from their degradation products; the chromatogram was scanned at 276 nm. The HPLC method utilizes a C18 column and a mobile phase consisting of acetonitrile/methanol/20 mM ammonium acetate (4:2:4, v/v/v) at a flow rate of 1.0 mL min⁻¹ for the separation of mosapride (t _R 11.4) and pantoprazole (t _R 4.4) from their degradation products. Quantitation was achieved with UV detection at 280 nm. The same HPLC method was successfully used in performing calibrations in lower concentration ranges for both drugs in human plasma using ezetimibe as internal standard. The methods were validated in terms of accuracy, precision, linearity, limits of detection, and limits of quantification. Mosapride and pantoprazole were exposed to acid hydrolysis and then analyzed by the proposed methods. As the methods could effectively separate the drugs from their degradation products, these techniques can be employed as stability-indicating methods that have been successively applied to pharmaceutical formulations without interference from the excipients. Moreover the HPLC method was successfully used in the determination of both drugs in spiked human plasma.

     

Photoresponsive and fluorescence behaviors of azobenzene‐containing amphiphilic block copolymers

The effects of solvency and mole fraction of azobenzene moieties (f_PAzoMA) on the photoresponsive and fluorescence behaviors of poly(acrylic acid)‐block‐poly(6‐[4‐(4′‐methoxyphenylazo)phenoxy]hexyl methacrylate) (PAA‐PAzoMA) amphiphilic diblock copolymers were investigated using UV–vis spectroscopy and fluorescence spectroscopy. The photoresponsive behavior depended strongly on the solvency and f_PAzoMA. When dissolved in a PAA‐selective solvent, PAA‐PAzoMA formed micelles with PAzoMA in the micelle core. The confinement of azobenzene moieties caused a steric hindrance, thereby markedly reducing the kinetics of photoisomerization compared with that of the unconfined PAA‐PAzoMA in a nonselective solvent. Additionally, PAA‐PAzoMA dissolved in the PAA‐selective solvent caused a blue shift of the maximum absorbance, suggesting the formation of H‐aggregates of azobenzene mesogens. The high H‐aggregate content substantially reduced the fluorescence emission. Consequently, the fluorescence emission of PAA‐PAzoMA in the nonselective solvent was more intense than that in the PAA‐selective solvent. Upon UV irradiation, the enhanced bent‐shaped cis isomers disturbed the compact packing of azobenzene mesogens, which substantially enhanced the fluorescence emission. Both the photoisomerization rate and fluorescence emission decreased with an increase in f_PAzoMA. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 793–803     

Simultaneous determination of levofloxacin hemihydrate and ambroxol hydrochloride in tablets by thin-layer chromatography combined with densitometry

This paper describes the application of thin-layer chromatography (TLC) combined with densitometry to simultaneous determination of levofloxacin hemihydrate (LEV) and ambroxol hydrochloride (AMB) in bulk and tablets. The separation was achieved on aluminum sheet of silica gel 60 F ₂₅₄ using chloroform: methanol: toluene: ammonia (10: 6: 3: 0.8 v/v/v/v) as mobile phase. Quantification was carried out densitometrically at 245 nm. This system was found to give compact spots for LEV (R _f value of 0.4) and AMB (R _f value of 0.7). The calibration curves for LEV and AMB was found to be linear between 9960–16600 ng/spot (r ² = 0.999) and 600–1000 ng/spot (r ² = 0.999), respectively. The mean percentage recoveries from tablets for LEV and AMB were 99.45% and 99.58%, respectively. The TLC-densitometry method has many advantages, such as simplicity, reasonable sensitivity, rapidity, and low cost, and it can be successfully used in routine analysis of both these drugs in tablet formulations.     

Production of Anti-Methicillin-Resistant <Emphasis Type="Italic">Staphylococcus</Emphasis> Activity from <Emphasis Type="Italic">Bacillus subtilis</Emphasis> sp. Strain B38 Newly Isolated from Soil

B38 bacterial strain, isolated from Tunisian soil showed a strong antimicrobial activity. Based on biochemical characterization and 16S rDNA sequence analysis, B38 strain was identified as Bacillus subtilis. Cell culture supernatant showed antibacterial activity against clinical isolates of methicillin-resistant Staphylococcus species and several Gram-positive and Gram-negative bacteria. Antifungal activity against phytopathogenic fungi was also observed. Antibacterial activity production started at early exponential growth phase, and maximum activity was reached at the stationary phase. This antibacterial activity was neither affected by proteases, lipase, and organic solvents, nor by surfactants. It was stable over a wide pH range and still active after autoclaving at 121 °C during 20 min. Thin layer chromatography followed by bioautography assay allowed the detection of four active spots with R _f values of 0.30, 0.47, 0.70, and 0.82. The single spot with R _f 0.30 showed antifungal activity, whereas the spots with R _f values of 0.47, 0.70, and 0.82 exhibited antibacterial activity.     

A Validated Stability-Indicating TLC Method for Determination of Forskolin in Crude Drug and Pharmaceutical Dosage Form

A simple, accurate, selective, precise, economical and stability-indicating high-performance thin-layer chromatographic method for analysis of forskolin in crude drug and in pharmaceutical dosage form was developed and validated. The method was developed on TLC aluminium plates precoated with silica gel 60F-254 using solvent system benzene:methanol (9:1, v/v), which gives compact spot of forskolin (R _f value 0.25 ± 0.02). Densitometric analysis of forskolin was carried out in the absorbance mode at 545 nm after spraying with anisaldehyde sulphuric acid. The linear regression analysis data for the calibration plots showed good linear relationship with r = 0.994 and 0.994 with respect to peak height and peak area, respectively, in the concentration range 100–1,000 ng per spot. The limits of detection and quantification were 8.1 and 26.9 ng per spot, respectively. The proposed method was applied for determination of forskolin in Coleus forskohlii root and in capsule dosage forms, which showed 0.18 and 0.57% w/w of forskolin. Forskolin was subjected to acid and alkali hydrolysis, oxidation, photodegradation and heat degradation. It was observed that the drug is susceptible to acid, base hydrolysis, oxidation, photo-oxidation and heat degradation. Statistical analysis proves that the method is repeatable, selective and accurate for the estimation of forskolin in crude drug and in pharmaceutical dosage forms. The developed method effectively resolved the forskolin from components of C. forskohlii root, from excipients of capsule as well as the degradation products of forskolin hence, it can be employed for routine analysis and as a stability-indicating method.     

Development and Validation of HPLC,TLC and Derivative Spectrophotometric Methods for the Analysis of Ezetimibe in the Presence of Alkaline Induced Degradation Products

Reversed phase‐high performance liquid chromatography (RP‐HPLC), thin layer chromatography (TLC) densitometry and first derivative spectrophotometry (1D) techniques are developed and validated as a stability‐indicating assay of ezetimibe in the presence of alkaline induced degradation products. RP‐HPLC method involves an isocratic elution on a Phenomenex Luna 5μ C₁₈ column using acetonitrile: water: glacial acetic acid (50:50:0.1 v/v/v) as a mobile phase at a flow rate of 1.5 mL/min. and a UV detector at 235 nm. TLC densitometric method is based on the difference in Rf‐values between the intact drug and its degradation products on aluminum‐packed silica gel 60 F₂₅₄ TLC plates as stationary phase with isopropanol: ammonia 33% (9:1 v/v) as a developing mobile phase. On the fluorescent plates, the spots were located by fluorescence quenching and the densitometric analysis was carried out at 250 nm. Derivative spectrophotometry, the zero‐crossing method, ezetimibe was determined using first derivative at 261 nm in the presence of its degradation products. Calibration graphs of the three suggested methods are linear in the concentration ranges 1–10 mcg/mL, 0.1–1 mg/mL and 1–16 mcg/mL with a mean percentage accuracy of 99.05 ± 0.54%, 99.46 ± 0.63% and 99.24 ± 0.82% of bulk powder, respectively. The three proposed methods were successfully applied for the determination of ezetimibe in raw material and pharmaceutical dosage form; the results were statistically analyzed and compared with those obtained by the reported method. Validation parameters were determined for linearity, accuracy and precision; selectivity and robustness and were assessed by applying the standard addition technique.     

Simultaneous densitometric determination of anthelmintic drug albendazole and its metabolite albendazole sulfoxide by HPTLC in human plasma and pharmaceutical formulations

A new, simple, accurate and precise high‐performance thin‐layer chromatographic method has been developed and validated for simultaneous determination of an anthelmintic drug, albendazole, and its active metabolite albendazole, sulfoxide. Planar chromatographic separation was performed on aluminum‐backed layer of silica gel 60G F₂₅₄ using a mixture of toluene–acetonitrile–glacial acetic acid (7.0:2.9:0.1, v /v/v) as the mobile phase. For quantitation, the separated spots were scanned densitometrically at 225 nm. The retention factors (R _f) obtained under the established conditions were 0.76 ± 0.01 and 0.50 ± 0.01 and the regression plots were linear (r ² ≥ 0.9997) in the concentration ranges 50–350 and 100–700 ng/band for albendazole and albendazole sulfoxide, respectively. The method was validated for linearity, specificity, accuracy (recovery) and precision, repeatability, stability and robustness. The limit of detection and limit of quantitation found were 9.84 and 29.81 ng/band for albendazole and 21.60 and 65.45 ng/band for albendazole sulfoxide, respectively. For plasma samples, solid‐phase extraction of analytes yielded mean extraction recoveries of 87.59 and 87.13% for albendazole and albendazole sulfoxide, respectively. The method was successfully applied for the analysis of albendazole in pharmaceutical formulations with accuracy ≥99.32%.     

Determination of Jasminoidin in Rabbit Plasma for the Pharmacokinetic Investigation after Single Dose Oral Administration of Gardenia jasminoides Ellis and Gardenia jasminoides Ellis Coupling Coptis chinensis Franch Extracts

A simple, sensitive and rapid method for the analysis of jasminoidin in rabbit plasma by liquid chromatography coupled to tandem mass spectrometry was developed. Detection was by positive ion electrospray ionization in multiple reactions monitoring mode. The method included a chromatographic run of 5.0 min using a C₁₈ analytical column and the calibration curve was linear over the concentration range of 0.5–2,000 ng mL⁻¹ with a correlation coefficient R of 0.998 or better. The intra- and inter-day precision ranged from 3.4 to 5.6% and 4.3 to 8.2%. The intra- and inter-day assay accuracy was between −7.4 and 8.6%. The method was successfully applied for the pharmacokinetic study on jasminoidin in rabbit after a single dose oral administration of Gardenia jasminoides Ellis (Gardenia) and Gardenia coupling Coptis chinensis Franch (Coptidis) extracts.

     

Thin-layer chromatography of glucose and sorbitol on Cu(II)-impregnated silica gel plates

A thin-layer chromatographic (TLC) separation of glucose and sorbitol on Cu(II)-impregnated silica gel plates with n-propanol: water (4:1) v/v as developer and potassium permanganate as detecting reagent has been worked out. The new impregnant is completely insoluble in water and thus enables the use of an aqueous developer. The R_f-values are 55 and 10 for glucose and sorbitol, respectively.     

Image analysis of phenylisothiocyanate derivatised and charge-couple device-detected glyphosate and glufosinate in food samples separated by thin-layer chromatography

The paper presents the application of pre-chromatographic derivatisation reaction of aminophosphonic acids (glyphosate and glufosinate) with phenylisothiocyanate in thin-layer chromatography (TLC). Silica gel as stationary phase and a mixture of methanol–water–diethyl ether (2:1:1, v/v/v) and ethanol–water–diethyl ether (4:1:2, v/v/v) were used as the mobile phase, respectively. Detection was performed by spraying TLC plates with a freshly prepared mixture of sodium azide (1%), starch solution (1% for glyphosate and 2% for glufosinate), and potassium iodide (1.0 × 10^–2 mol L^?1) adjusted to pH 6.0 and exposed to iodine vapour for 15 s. Both glyphosate and glufosinate as phenylthiocarbamates (PTC-derivatives) were visible as white spots against a violet background which were converted into chromatograms using TLSee software. The calibration curves for glyphosate and glufosinate were within the ranges of 8.45–84.5 ng and 1.98–79.2 ng per spot, respectively. The limits of detection and quantification for glyphosate were at a level of 4 and 8.45 ng per spot, and for glufosinate were 0.99 and 1.78 ng per spot, respectively. The proposed method was successfully used in the determination of aminophosphonic acids in spiked plants samples.