Synthesis of di‐ and triblock copolymers of styrene and butyl acrylate by controlled atom transfer radical polymerization

Di‐ and triblock copolymers of styrene and butyl acrylate with controlled molar masses (M_n up to ≈ 10⁵) were sequentially prepared by radical atom transfer polymerization in a homogeneous medium using chlorine end capped polymers as initiators and the copper^(I) chloride/bipyridine complex as catalyst, in the presence of dimethylformamide. Random poly(styrene‐co‐butyl acrylate) was synthesized and the cross‐over reactions between Cl end capped polystyrene and poly(butyl acrylate) to the opposite monomers were examined.     

Kinetic study of in situ normal and AGET atom transfer radical copolymerization of n–butyl acrylate and styrene: Effect of nanoclay loading and catalyst concentration

The effect of clay nanolayers and catalyst concentration on the kinetics of atom transfer radical copolymerization of styrene and butyl acrylate initiated by activators generated by electron transfer (AGET initiation system) or an alkyl halide (normal initiation system) was studied. Monomer conversion was studied by attenuated total reflection–Fourier transform infrared spectroscopy, and also proton nuclear magnetic resonance (¹H NMR) spectroscopy was utilized to evaluate the heterogeneity in the composition of poly(styrene‐co‐butyl acrylate) chains. A decrease in the copolymerization rate of styrene and butyl acrylate in the presence of clay platelets was observed since clay layers confine the accessibility of monomer and growing radical chains. Considering the linear first‐order kinetics of the polymerization, successful AGET and normal atom transfer radical polymerization (ATRP) in the presence of clay nanolayers were carried out. Consequently, poly(styrene‐co‐butyl acrylate) chains with narrow molecular weight distribution and low polydispersity indices (1.13–1.15) were obtained. The linearity of ln([M]₀/[M]) versus time and molecular weight distribution against conversion plots indicates that the proportion of propagating radicals is almost constant during the polymerization, which is the result of insignificant contribution of termination and transfer reactions. Controlled synthesis of poly(styrene‐co‐butyl acrylate)/clay is implemented with the diminishing catalyst concentration of copper(I) bromide/N,N,N′,N′′,N′′‐pentamethyl diethylene triamine without affecting the copolymerization rate of normal ATRP. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 789–799, 2012     

Synthesis of block copolymers by the transformation of cationic polymerization into reversible atom transfer radical polymerization

Azo-containing polytetrahydrofuran (PTHF) obtained by cationic polymerization was used as a macroinitiator in the reverse atom transfer radical polymerization (RATRP) of styrene and methyl acrylate in conjunction with CuCl₂/2,2′-bipyridine as a catalyst. Diblock PTHF–polystyrene and PTHF–poly(methyl acrylate) were obtained after a two-step process. In the first step of the reaction, stable chlorine-end-capped PTHF was formed with the thermolysis of azo-linked PTHF at 65–70 °C in the presence of the catalyst. Heating the system at temperatures of 100–110 °C started the polymerization of the second monomer, which resulted in the formation of block copolymers. The decomposition behavior of the azo-linked PTHF and the structure of the block copolymers were determined by ¹H NMR and gel permeation chromatography (GPC). Kinetic studies and GPC analyses further confirmed the controlled/living nature of the RATRP initiated by the polymeric radicals. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2199–2208, 2002     

Effect of Nanoclay on Styrene and Butyl Acrylate AGET ATRP in Miniemulsion: Study of Nucleation Type,Kinetics, and Polymerization Control

Poly(styrene‐co‐butyl acrylate)/clay nanocomposites were synthesized in miniemulsion via activators generated by electron transfer (AGET) for atom transfer radical polymerization (ATRP). Optimum amounts of catalyst and reducing agent were chosen by considering a linear increase in ln([M₀]/[M]) versus time, narrow molecular distribution, and low polydispersity index (PDI). Critical micelle concentration and cross‐sectional surface area per surfactant head group were determined by surface tension analysis. Calculations show that droplet nucleation is the dominant mechanism of nucleation in a miniemulsion system, and there is no micelle in the system. Gel permeation chromatography was used to characterize molecular weight, PDI, and molecular weight distribution. After determination of appropriate conditions, poly(styrene‐co‐butyl acrylate)/clay nanocomposite latexes were synthesized. Low PDI, narrow molecular weights, and first‐order kinetics of the nanocomposites justify that polymerization is well controlled. Kinetics of polymerization decreases by clay loading. The apparent propagation rate constant (k_app) of polymerization in the case of poly(styrene‐co‐butyl acrylate) is 4.079 × 10^?6, which becomes 0.558 × 10^?6 in the case of poly(styrene‐co‐butyl acrylate)/clay nanocomposite with 2% nanoclay. A decrease in the polymerization rate is related to the hindrance effect of nanoclay layers on monomer diffusion toward the loci of growing macroradicals.     

Thermal stability and high glass transition temperature of 4-chloromethyl styrene polymers bearing carbazolyl moieties

A new styrene derivative monomer, 4-(N-carbazolyl)methyl styrene (CzMS), was synthesized by reacting 4-chloromethyl styrene with carbazole in the presence of sodium hydride. Then, CzMS was homopolymerized and copolymerized with different monomers such as methyl methacrylate (MMA), ethyl methacrylate (EMA), methyl acrylate (MA), ethyl acrylate (EA) and n-butyl acrylate (BA) by free radical polymerization method in N,N-di-methylformamide (DMF) solution at 70 ± 1 °C using azobisisobutyronitrile initiator to give the copolymers I-V in good yields. The structure of all the resulted polymers was characterized and confirmed by FT-IR, ¹H NMR and ¹³C NMR spectroscopic techniques. The average molecular weight and glass transition temperature of polymers were determined using gel permeation chromatograph (GPC) and differential scanning calorimeter (DSC) instruments, respectively. It was found that these polymers with carbazole moieties have high thermal stability and the presence of bulk carbazole groups in polymer side chains leads to an increase in the rigidity and glass transition temperature of polymers.     

Polyelectrolyte membranes prepared by dynamic self-assembly of poly (4-styrenesulfonic acid-co-maleic acid) sodium salt (PSSMA) for nanofiltration (I)

In recent years, the layer-by-layer (LBL) self-assembly of polyelectrolyte has attracted much attention for the preparation of nanofiltration (NF) membranes. However, most researchers focused on the homopolymers, few studied on the copolymers for the preparation of NF membranes. In the present work, a series of nanofiltration membranes were prepared by dynamic self-assembly of a copolymer polyelectrolyte containing both weakly and strongly ionized groups, poly (4-styrenesulfonic acid-co-maleic acid) sodium salt (PSSMA), with poly (allylamine hydrochloride) (PAH) and poly (styrenesulfonic acid sodium salt) (PSS) on the modified polyacrylonitrile (PAN) ultra-filtration membranes. The effects of substrate, deposition pH, SS/MA ratio in PSSMA, concentration of the PSSMA and bilayer number on the properties of the NF membranes were investigated. The results indicated that the performances of the NF membranes prepared by dynamic self-assembly process were superior to those prepared by the static self-assembly process. The membranes terminated with PSSMA were negatively charged. Due to the changes of charge density and conformation of PSSMA in different pH conditions, the [PAH/PSS]₁PAH/PSSMA membrane prepared at pH 2.5 showed higher Na₂SO₄ rejection and larger flux than those of the membrane prepared at pH 5.7. The NF membrane [PAH/PSS]₁PAH/PSSMA composed of only two bilayers exhibited 91.4% Na₂SO₄ rejection and allowed solution flux of 28.6 L/m² h at 0.2 MPa. The solution flux increased to 106.6 L/m² h at 0.8 MPa, meanwhile, no obvious decrease in Na₂SO₄ rejection was observed.     

Poly(acrylate‐b‐styrene‐b‐isobutylene‐b‐styrene‐b‐acrylate) Block Copolymers via Carbocationic and Atom Transfer Radical Polymerizations

A series of polyacrylate‐polystyrene‐polyisobutylene‐polystyrene‐polyacrylate (X‐PS‐PIB‐PS‐X) pentablock terpolymers (X=poly(methyl acrylate) (PMA), poly(butyl acrylate) (PBA), or poly(methyl methacrylate) (PMMA)) was prepared from poly (styrene‐b‐isobutylene‐b‐styrene) (PS‐PIB‐PS) block copolymers (BCPs) using either a Cu(I)Cl/1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) or Cu(I)Cl/tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) catalyst system. The PS‐PIB‐PS BCPs were prepared by quasiliving carbocationic polymerization of isobutylene using a difunctional initiator, followed by the sequential addition of styrene, and were used as macroinitiators for the atom transfer radical polymerization (ATRP) of methyl acrylate (MA), n‐butyl acrylate (BA), or methyl methacrylate (MMA). The ATRP of MA and BA proceeded in a controlled fashion using either a Cu(I)Cl/PMDETA or Cu(I)Cl/Me₆TREN catalyst system, as evidenced by a linear increase in molecular weight with conversion and low PDIs. The polymerization of MMA was less controlled. ¹H‐NMR spectroscopy was used to elucidate pentablock copolymer structure and composition. The thermal stabilities of the pentablock copolymers were slightly less than the PS‐PIB‐PS macroinitiators due to the presence of polyacrylate or polymethacrylate outer block segments. DSC analysis of the pentablock copolymers showed a plurality of glass transition temperatures, indicating a phase separated material.     

Effect of monomer/nanoclay interaction on the kinetics of atom transfer radical homo- and copolymerization of styrene and methyl acrylate

Atom transfer radical homo- and copolymerization of styrene and methyl acrylate initiated with CCl₃-terminated poly(vinyl acetate) macroinitiator were performed at 90°C in the presence of nanoclay (Cloisite 30B). Controlled molecular weight characteristics of the reaction products were confirmed by GPC. It was shown that nanoclay slightly decreased the rate of styrene polymerization, while it significantly enhanced the rate of methyl acrylate polymerization and its copolymerization with styrene. The reactivity ratios of the monomers in the presence and in the absence of nanoclay were calculated (r _St = 1.002 ± 0.044, r _MA = 0.161 ± 0.018 by extended Kelen-Tudos method and r _St = 1.001 ± 0.038, r _MA = 0.163 ± 0.016 by Mao-Huglin method), confirming that the presence of nanoclay has no influence on monomer reactivity. The enhancement in the homopolymerization rate of methyl acrylate as well as its copolymerization rate with styrene was attributed to nanoclay effect on the dynamic equilibrium between active (macro)radicals and dormant species. Dipole moments of the monomers were successfully used to predict structure of the polymer/clay nanocomposites prepared via in situ polymerization.     

Reversible Addition–Fragmentation Chain‐Transfer Polymerization of Octadecyl Acrylate

Abstract

Polymerization of octadecyl acrylate (ODA) was carried out in benzene solution using the 2‐cyanoprop‐2‐yl dithiobenzoate (CPDB) as the reversible addition–fragmentation chain‐transfer (RAFT) agent and AIBN as the initiator. The results show the obtained polymer with controlled molecular weight and low PDI value. The relationships between both of the ln([M ₀]/[M]) vs. reaction time and molecular weight vs. conversion showed a straight line. The block copolymer of ODA and styrene (PODA‐b‐PSt) obtained using poly(octadecyl acrylate) (PODA) as a macro‐RAFT agent. The polymers were characterized by ¹H NMR, DSC, and gel permeation chromatograph (GPC). The effect of molar ratio [CPDB]:[AIBN] and reaction temperature on polymerization was investigated.     

Controlled radical polymerization of alkyl acrylates and styrene using a half-sandwich molybdenum(III) complex containing diazadiene ligands

The half-sandwich molybdenum(III) complex CpMoCl₂(ⁱPr₂-dad) (ⁱPr₂-dad=ⁱPr-NCH-CHN-ⁱPr) proved to be an effective metal catalyst for the controlled radical polymerization of methyl acrylate, butyl acrylate, and styrene. In conjunction with an alkyl iodide [R-I: CH₃CH(COOEt)I] as an initiator and in the presence or absence of Al(O-i-Pr)₃ as a co-catalyst, the molybdenum-based system gave polymers with narrow molecular weight distributions. The in situ addition of styrene to a macroinitiator of poly(methylacrylate) afforded an AB-type block copolymer.     

Copper catalyzed atom transfer radical copolymerization of glycidyl methacrylate and 2‐ethylhexyl acrylate

This investigation reports the atom transfer radical copolymerization (ATRcP) of glycidyl methacrylate (GMA) and 2‐ethylhexyl acrylate (EHA). Poly(glycidyl methacrylate) (PGMA) has easily transformable pendant oxirane group and poly(2‐ethylhexyl acrylate) (PEHA) has very low T_g. They are the important components of coating and adhesive materials. Copolymerization of GMA and EHA was carried out in bulk and in toluene at 70 °C at different molar feed ratios using CuCl as catalyst in combination with 2,2′‐bypyridine (bpy) as well as N,N,N′,N″,N″‐pentamethyl diethylenetriamine (PMDETA) as ligand. The molecular weight (M_n) and the polydispersity index (PDI) of the polymers were determined by GPC analysis. The molar composition of the copolymers was determined by ¹H NMR analysis. The reactivity ratios of GMA (r₁) and EHA (r₂) were determined using Finemann‐Ross and Kelen‐Tudos linearization methods and those had been compared with the literature values for conventional free radical copolymerization. The thermal properties of the copolymers were studied by DSC and TGA analysis. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6526–6533, 2009     

A novel azo‐containing dithiocarbamate used for living radical polymerization of methyl acrylate and styrene

A novel azo‐containing dithiocarbamate, 1‐phenylethyl N,N‐(4‐phenylazo) phenylphenyldithiocarbamate (PPADC), was successfully synthesized and used to mediate the polymerization of methyl acrylate (MA) and styrene (St). In the presence of PPADC, the reversible addition‐fragmentation chain transfer (RAFT) polymerization was well controlled in the case of MA, however, the slightly ill‐controlled in the case of St. Interestingly, the polymerization of St could be well‐controlled when using PPADC as the initiator in the presence of CuBr/PMDETA via atom transfer radical polymerization (ATRP) technique. In the cases of RAFT polymerization of MA and ATRP of St, the kinetic plots were both of first‐order, and the molecular weight of the polymer increased linearly with the monomer conversion while keeping the relatively narrow molecular weight distribution (M_w/M_n). The molecular weight of the polymer measured by gel permeation chromatographer (GPC) was also close to the theoretical value (M_n(th)). The obtained polymer was characterized by ¹H‐NMR analysis, ultraviolet absorption, FTIR spectra analysis and chain‐extension experiments. Furthermore, the photoresponsive behaviors of azobenzene‐terminated poly(methyl acrylate) (PMA) and polystyrene (PS) were similar to PPADC. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5626–5637, 2008     

Synthesis of anionic amphiphilic diblock copolymers of poly(styrene) and poly(acrylic acid) by reverse iodine transfer polymerization (RITP) in solution and emulsion

Reverse iodine transfer polymerization (RITP), offering the appealing potential of the in situ generation of transfer agents out of molecular iodine I₂, is employed in the synthesis of anionic amphiphilic diblock copolymers of poly(styrene) and poly(acrylic acid). Starting with well‐characterized poly(styrene) as macro‐transfer agents synthesized by RITP, diblock copolymers poly(styrene)‐b‐poly(tert‐butyl acrylate) of various lengths are successfully yielded in solution with a good architectural control. These blocks are then subjected to acid deprotection and subsequent pH control to give rise to anionic amphiphilic poly(styrene)‐b‐poly(acrylic acid). Besides, homopolymers of tert‐butyl acrylate are produced by RITP both in solution and in emulsion. Furthermore, a fruitful trial of the synthesis of diblock copolymers poly(tert‐butyl acrylate)‐b‐poly(styrene) is carried out through chain extension of the poly(tert‐butyl acrylate) latex as a macro‐transfer agent in seeded emulsion polymerization of styrene. Finally, the prepared block copolymer is deprotected to bring about its amphiphilic nature and a pH control caters for its anionic character. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4389–4398     

Photosensitive acrylate copolymer for electrodeposition photoresist

A photosensitive random copolymer UPDHES was prepared by introducing the acrylate groups into the side chain of the copolymer composed of N,N-dimethylaminomethyl methacrylate (DMAEMA), 2-hydroxyethyl acrylate (HEA), 2-ethylhexyl acrylate (EHA), and styrene (St) (PDHES). The molecular structure of UPDHES was characterized by FTIR and ¹H NMR analyses. Self-assembling of the random copolymer UPDHES in water formed positively charged photosensitive particles, and the particles were measured by TEM to be spherical-like nano-particles range from 20–90 nm. The oriented deposition of the particles on gold electrode was investigated with the cyclic voltammetry and TEM under low applied voltage. The influence of high applied voltage on current density in electrodeposition process and thickness of films were investigated also. Besides, the photopolymerization rate and final C=C conversion reached to the highest values with 3 wt % Irgacure 1173 addition, whereas decreased as further added. Moreover, an exposure-development procedure of electrodeposition UPDHES film produced developed diagram with resolution of 15 μm.     

Synthesis of miktoarm star and miktoarm star block copolymers via a combination of atom transfer radical polymerization and stable free‐radical polymerization

A trifunctional initiator, 2‐phenyl‐2‐[(2,2,6,6‐tetramethyl)‐1‐piperidinyloxy] ethyl 2,2‐bis[methyl(2‐bromopropionato)] propionate, was synthesized and used for the synthesis of miktoarm star AB₂ and miktoarm star block AB₂C₂ copolymers via a combination of stable free‐radical polymerization (SFRP) and atom transfer radical polymerization (ATRP) in a two‐step or three‐step reaction sequence, respectively. In the first step, a polystyrene (PSt) macroinitiator with dual ω‐bromo functionality was obtained by SFRP of styrene (St) in bulk at 125 °C. Next, this PSt precursor was used as a macroinitiator for ATRP of tert‐butyl acrylate (tBA) in the presence of Cu(I)Br and pentamethyldiethylenetriamine at 80 °C, affording miktoarm star (PSt)(PtBA)₂ [where PtBA is poly(tert‐butyl acrylate)]. In the third step, the obtained St(tBA)₂ macroinitiator with two terminal bromine groups was further polymerized with methyl methacrylate by ATRP, and this resulted in (PSt)(PtBA)₂(PMMA)₂‐type miktoarm star block copolymer [where PMMA is poly(methyl methacrylate)] with a controlled molecular weight and a moderate polydispersity (weight‐average molecular weight/number‐average molecular weight < 1.38). All polymers were characterized by gel permeation chromatography and ¹H NMR. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2542–2548, 2003     

Novel miktofunctional initiator for the preparation of an ABC‐type miktoarm star polymer via a combination of controlled polymerization techniques

An ABC‐type miktoarm star polymer was prepared with a core‐out method via a combination of ring‐opening polymerization (ROP), stable free‐radical polymerization (SFRP), and atom transfer radical polymerization (ATRP). First, ROP of ϵ‐caprolactone was carried out with a miktofunctional initiator, 2‐(2‐bromo‐2‐methyl‐propionyloxymethyl)‐3‐hydroxy‐2‐methyl‐propionic acid 2‐phenyl‐2‐(2,2,6,6‐tetramethyl‐piperidin‐1‐yl oxy)‐ethyl ester, at 110 °C. Second, previously obtained poly(ϵ‐caprolactone) (PCL) was used as a macroinitiator for SFRP of styrene at 125 °C. As a third step, this PCL–polystyrene (PSt) precursor with a bromine functionality in the core was used as a macroinitiator for ATRP of tert‐butyl acrylate in the presence of Cu(I)Br and pentamethyldiethylenetriamine at 100 °C. This produced an ABC‐type miktoarm star polymer [PCL–PSt–poly(tert‐butyl acrylate)] with a controlled molecular weight and a moderate polydispersity (weight‐average molecular weight/number‐average molecular weight < 1.37). The obtained polymers were characterized with gel permeation chromatography and ¹H NMR. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4228–4236, 2004     

Polystyrene‐block‐poly(butyl acrylate) and polystyrene‐block‐poly[(butyl acrylate)‐co‐styrene] block copolymers prepared via controlled free‐radical miniemulsion polymerization using degenerative iodine transfer

Polystyrene‐block‐poly(butyl acrylate) and polystyrene‐block‐poly[(butyl acrylate)‐co‐styrene] block copolymers were prepared in an aqueous dispersed system via controlled free‐radical miniemulsion polymerization using degenerative iodine transfer. The first step is batch miniemulsion polymerization of styrene in the presence of C₆F₁₃I as transfer agent. The second step consists of the addition of butyl acrylate to this seed latex, either in one shot or continuously. The addition was started before the consumption of styrene was complete in order to perform a copolymerization reaction able to moderate the rate of propagation in the butyl acrylate polymerization step and, therefore, to favor the transfer reaction. Kinetics of polymerization and control of the molar masses were examined according to the experimental conditions and particularly to the rate of butyl acrylate addition. The formed block copolymers were analyzed by size exclusion chromatography (SEC), differential scanning calorimetry (DSC) and nuclear magnetic resonance (NMR).     

Synthesis and characterization of a novel silane-based vinylic monomer and its application in the multilayer core-shell latex

A novel monomer methacrylamidophenoxy dimethylsiloxy phenylphthalimide was obtained by a reaction of 4,4′-bis-aminophenoxy dimethylsilane, phthalic anhydride and methacryloyl chloride. Then it has been used in the synthesis of phase-separated polymer latex with a multilayer core-shell morphology by surface cross-linking emulsion polymerization. Poly(butyl acrylate) was used for the seed and the core of the latex, the inner shell was poly(butyl acrylate/styrene) cross-linked with divinylbenzene to avoid phase inversion, and the poly(methyl methacrylate/butyl acrylate/methacrylamidophenoxy dimethylsiloxy phenylphthalimide) was the outer shell. The structural elucidation of monomer was carried out by elemental analysis, FTIR, ¹H NMR, and ¹³C NMR spectroscopic techniques. The morphology and glass transition temperatures of the synthesized product were investigated by transmission electron microscopy and differential scanning calorimetry, respectively. The multilayer core-shell structure was clearly shown in TEM micrographs, and the three-phase separation was confirmed by DSC analysis. The obtained results demonstrated that the average particle size is 81.8, 108 and 132 nm for the core, core-shell and multilayer core-shell particles, which agrees with the TEM micrograph measurement of 75, 103, and 131 nm, respectively.     

Synthesis of Oil Spill Sorbents Based on Cellulose Derivatives

In this work, hydroxypropyl cellulose (HPC) was used to synthesize hydroxypropylcellulose acrylate (HPCA) macromonomer by esterification of HPC with acryloyl chloride in homogenous solution of DMF. Then the produced HPCA monomer was copolymerized with ethylhexyl acrylate (EHA) in presence of two types of crosslinkers to produce oil gel. Several parameters were considered, namely, monomers feed ratio, type and concentration of the applied crosslinkers. The chemical structures of both HPC and HPCA were confirmed by using FTIR and ¹H NMR spectroscopic analyses. Also, the thermal properties of the crosslinked oil absorbents were investigated by using TGA. Furthermore, morphological propoeries of these crosslinked sorbers were studied through SEM and their swelling efficiency was thoroughly investigated in heavy and light oil.     

Copolymers of 2,5‐bis[(4‐methoxyphenyl) oxycarbonyl]styrene with n‐butyl acrylate: Design,synthesis, and characterization

A series of rod–coil diblock copolymers, consisting of poly{2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene} as a rigid segment and poly(n‐butyl acrylate) as a flexible part, were successfully prepared through two inverse procedures by atom transfer radical polymerization. The copolymers were characterized by ¹H NMR and gel permeation chromatography and had high molecular weights and relatively narrow polydispersities (polydispersity index < 1.20). All the block copolymers synthesized had two distinct glass‐transition temperatures according to differential scanning calorimetry. A polarizing optical microscopy investigation demonstrated the liquid crystallinity of the diblock copolymers. The self‐assembly behaviors in dilute solutions was studied by transmission electron microscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5935–5943, 2005