Inhibitive action of ethanol extracts from Nauclea latifolia on the corrosion of mild steel in H2SO4 solutions and their adsorption characteristics

The inhibitive action of ethanol extracts from leaves (LV), bark (BK) and roots (RT) of Nauclea latifolia on mild steel corrosion in H₂SO₄ solutions at 30–60 °C was studied using weight loss and gasometric techniques. The extracts were found to inhibit the corrosion of mild steel in H₂SO₄ solutions and the inhibition efficiencies of the extracts follow the trend: RT > LV > BK. The inhibition efficiency increased with the extracts concentration but decreased with temperature rise. Physical adsorption of the phytochemical components of the plant on the metal surface is proposed as the mechanism of inhibition. The adsorption characteristics of the inhibitor were approximated by the thermodynamic-kinetic model of El-Awady et al.     

Surface interaction and corrosion inhibition of carbon steel in sulfuric acid using Petroselinum crispum extract

With the aid of the mass loss (ML) method, and a few electrochemical techniques [potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS)], the inhibitory impact of Petroselinum crispum (PC) extract on C-steel corrosion in solutions of 1 M sulfuric acid was assessed. By employing Fourier-transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) techniques, the C-steel surface morphology was investigated. The data showed that the solution of plant extract can be effectively utilized to inhibit C-steel corrosion in solutions of 1 M sulfuric acid. The effectiveness of the extract was enhanced by the higher extract dose and rising temperature. The apparent activation energy and the enthalpy of the dissolution process were determined and discussed. The presence of PC decreases the double-layer capacity from 493.1 to 107.3 μF cm⁻² and raises the charge transfer resistance in a solution of 1 M sulfuric acid from 43.39 to 287.7 Ω cm². PC is a mixed-type inhibitor, as demonstrated by PDP tests. The PC extract demonstrated the highest productivity for the C-steel protection up to 90.2% at 300 ppm from the extract, according with the PDP technique. The attained data indicated that PC extract was adsorbed chemically (ΔG^o_ads > 40 kJ mol⁻¹) onto the surface of the C-steel following the Temkin isotherm. The results of numerous tests appear to agree.     

Corrosion inhibition and adsorption properties of Azadirachta indica mature leaves extract as green inhibitor for mild steel in HNO3

Abstract

The corrosion inhibition and adsorption properties of Neem (Azadirachta indica – AZI) mature leaves extract as a green inhibitor of mild steel (MS) corrosion in nitric acid (HNO₃) solutions have been studied using a gravimetric technique for experiments conducted at 30 and 60°C. The results disclose that the different concentrations of the AZI extract inhibit MS corrosion and that inhibition efficiency of the extract varies with concentration and temperature. For extract concentrations studied and ranging from 9.09 to 28.57 mg/L, the maximum inhibition efficiency was 80.5 and 80.07% both at 28.57 mg/L AZI at 30 and 60°C, respectively, in 2.0 N HNO₃. The adsorption of the inhibitor on the MS surface was exothermic and consistent with the physical adsorption mechanism, best described by the Frumkin adsorption isotherm.     

Inhibition of acid corrosion of carbon steel using aqueous extract of olive leaves

The inhibitive action of the aqueous extract of olive (Olea europaea L.) leaves toward the corrosion of C-steel in 2 M HCl solution was investigated using weight loss measurements, Tafel polarization, and cyclic voltammetry. It was found that the extract acts as a good corrosion inhibitor for the tested system. The inhibition efficiency increases with increasing extract concentration. The inhibitive action of the extract is discussed with a view to adsorption of its components onto the steel surface, making a barrier to mass and charge transfer. The adsorption of extract components onto the steel surface was found to be a spontaneous process and to follow the Langmuir adsorption isotherm. It was found also that such adsorption increases the activation energy of the corrosion process. The results of cyclic voltammetry showed that the presence of olive extract decreases the charge density in the transpassive region. The inhibition efficiency is greatly reduced as the temperature is increased.     

Effect of the alkyl chain of quaternary ammonium cationic surfactants on corrosion inhibition in hydrochloric acid solution

In this study, the effect of the alkyl chain of quaternary ammonium cationic surfactants on corrosion inhibition in hydrochloric acid (HCl) solution was investigated by using dodecyl trimethyl ammonium chloride (DTAC), tetradecyl trimethyl ammonium chloride (TTAC), cetyl trimethyl ammonium chloride (CTAC), and octadecyl trimethyl ammonium chloride (OTAC) as corrosion inhibitors to uncover their structure–efficiency relationships. The effect of the alkyl chain of quaternary ammonium cationic surfactants on corrosion inhibition in HCl solution was studied under different conditions, such as corrosion inhibitor concentration, temperature, and acidity, and this was done using the weightlessness method. The results obtained show that these inhibitors have high corrosion inhibition effect on A₃ steel, and the corrosion inhibition efficiency is dependent on the length of the alkyl chain. At the same concentration, the longer the alkyl chain, the weaker the corrosion inhibition effect. When the temperature was 50 °C and the concentration of corrosion inhibitor was 70 mg/L, the corrosion inhibition efficiency order of the four cationic surfactants was DTAC > TTAC > CTAC > OTAC. Besides, the experimental results obtained show that the adsorption of the inhibitor on the A₃ steel surface conforms to the Langmuir type isotherm, and then the corresponding adsorption thermodynamic parameters were obtained according to these parameters. It was observed that ΔH, ΔS, and E_a increased with increase in the length of the alkyl chain. The adsorption of the inhibitor on the steel surface is an exothermic, spontaneous, entropy process.     

The inhibition mechanism of pitting corrosion of pure aluminum by nitrate and sulfate ions in neutral chloride solution

The inhibition mechanism of pitting corrosion of natural oxide film-covered pure aluminum by NO⁻ ₃ and SO²⁻ ₄ ions has been examined in 0.1 M NaCl solution using potentiodynamic polarization experiments, a.c. impedance spectroscopy, Auger electron spectroscopy and a combination of the potentiostatic current transient method and optical microscopy. It was found that NO⁻ ₃ ions can be incorporated into the natural oxide film on pure aluminum at open-circuit potential, but the incorporation of SO²⁻ ₄ ions into the film hardly occurs. The incorporation of NO⁻ ₃ ions lowered the pitting susceptibility of pure aluminum in 0.1 M NaCl solution. Based upon the experimental results, it is suggested that the pitting corrosion inhibition mechanism by anions can be classified into two different groups: inhibition by competitive adsorption of anions (SO²⁻ ₄) with Cl⁻ ions and inhibition by the incorporation of anions (NO⁻ ₃) into the film rather than competitive adsorption. Both cases may impede the incorporation of Cl⁻ ions into the film, thus inhibiting pitting corrosion of natural oxide film-covered pure aluminum in chloride solutions. Received: 16 October 1998 / Accepted: 6 January 1999     

Extracts of Punica granatum Linne husk as green and eco-friendly corrosion inhibitors for mild steel in oil fields

Extracts of pomegranate have been investigated, by use of weight loss and potentiodynamic polarization techniques, as green and eco-friendly inhibitors of corrosion of Q235A steel in 1 M hydrochloric acid solution at 60 °C. The efficiency of inhibition by the extracts varied with extract concentration from 10 to 1,000 mg/L; the highest efficiency was 95.0 %. The extracts inhibit corrosion mainly by an adsorption mechanism. In addition, the hydroxyl and ether groups of polyphenols can capture the H⁺ to reduce the corrosion, and the polyphenols can eliminate dissolved O₂ to inhibit oxygen-adsorption corrosion. Potentiodynamic polarization studies show that extracts are mixed-type inhibitors.     

Spondias mombin L. as a green corrosion inhibitor for aluminium in sulphuric acid: Correlation between inhibitive effect and electronic properties of extracts major constituents using density functional theory

The inhibition of aluminium in 0.5 M H₂SO₄ by extracts of Spondias mombin L. was investigated using the standard gravimetric technique at 30–60 °C. The trend of inhibition efficiency with temperature was used to propose the mechanism of inhibition. It was found that the S. mombin L. extract acts as an inhibitor for acid-induced corrosion of aluminium. Inhibition efficiency (%I) of the extract increased with an increase in concentration of the S. mombin L. extract but decreased with temperature. Furthermore, inhibition efficiency (%I) synergistically increased on addition of potassium iodide. Inhibitor adsorption characteristics were approximated by Langmuir adsorption isotherm at all the concentrations and temperatures studied. The mechanism of physical adsorption is proposed from the trend of inhibition efficiency with temperature and from the calculated values of Gibbs free energy, activation energy and heat of adsorption. Quantum chemical calculations were performed using the density functional theory at B3LYP/6-31G (d) level of theory to find out whether a clear link exists between the inhibitive effect of the extract and the electronic properties of its main constituents.     

Some aromatic hydrazone derivatives as inhibitors for the corrosion of C-steel in phosphoric acid solution

The effect of furfural benzoylhydrazone and its derivatives (I-VII) as corrosion inhibitors for C-steel in 1M phosphoric acid solution has been studied by weight-loss and galvanostatic polarization techniques. A significant decrease in the corrosion rate of C-steel was observed in the presence of the investigated inhibitors. This study revealed that, the inhibition efficiency increases with increasing the inhibitor concentration, and the addition of iodide ions enhances it to a considerable extent. The effect of temperature on the inhibition efficiency of these compounds was studied using weight-loss method. Activation energy (E(a)*) and other thermodynamic parameters for the corrosion process were calculated and discussed. The galvanostatic polarization data indicated that, the inhibitors were of mixed-type, but the cathode is more polarized than the anode. The adsorption of these compounds on C-steel surface has been found to obey Frumkin's adsorption isotherm. The mechanism of inhibition was discussed in the light of the chemical structure of the undertaken inhibitors.     

Applicability of winged bean extracts as organic corrosion inhibitors for reinforced steel in 0.5 ​M HCl electrolyte

Corrosion inhibition properties of winged bean (WB) extracts on reinforced steel in 0.5 ?M HCl solution was studied through experimental and theoretical calculation methods. The electrochemical studies suggested that inhibition efficiency increased with increasing concentration of WB extracts up to 95%. Nyquist diagrams revealed an increase in the charge transfer resistance values and a decrease in the constant phase element as the concentration of WB extracts were increased. The potentiodynamic polarization results revealed that WB extracts behave as mixed-type inhibitors, which physically adsorbed onto the reinforced steel surface. Effect of temperature study demonstrated that the corrosion resistance behaviour of WB extracts decreased with an increase in temperature, yielding a corrosion rate of 3.39 mmpy and 4.02 mmpy at 333 ?K with the incorporation of 1000 ?ppm WBW and WBE extracts, respectively. The thermodynamic study implied that the adsorption process follows the Langmuir isotherm with free energy adsorption of ΔG_ads WBW ?= ?-17.29 ?kJ ?mol^-1 and ΔG_ads WBE ?= ?-16.81 ?kJ ?mol^-1. Corresponding to the molecular modelling study, the semi-empirical method and molecular dynamics (MD) simulation investigated the correlation between the inhibitor compounds and the metal surface. One of the phenolic molecule constituents (gallic acid) was chosen to establish the structural and electronic parameters responsible for the high inhibition efficiency. A greater E_binding of 0.181 (a.u.) indicates that gallic acid in WB extracts can easily bind with the Fe surface, thus projecting a higher inhibitory performance. Surface morphology study affirmed the effective adsorption of WB extracts onto the surface of reinforced steel.     

Experimental and DFT evaluation of adsorption and inhibitive properties of Moringa oliefera extract on mild steel corrosion in acidic media

The corrosion response of mild steel in 0.5 M H₂SO₄ acid solution in the presence of Moringer oliefera (MO) leaf extract was investigated using gravimetric, electrochemical, and DFT techniques. Gravimetric results indicate that MO exhibits a high inhibition value up to 93.0% when the concentration was 1.5 g/L. Inhibition value in general increased with an increase in concentration of the extracts but decreased with prolonged exposure time and temperature. Analysis of polarization curves indicated that MO extract acted as mixed-type inhibitors. The adsorption process of MO on a mild steel surface in the acid solution fitted the Langmuir isotherm. GC/MS analysis of MO extract revealed the presence of more than 29 active constituents including 9,12-Octadecadienoic acid (Z, Z) methyl ester (28.55%); n-Hexadecanoic acid (11.24%); 9,12,15-Octadecatrienoic acid methyl ester (9.31%), Benzeneacetonitrile, 4-hydroxy-(6.32%), 2-Furancarboxaldehyde,5-(hydroxymethyl)-(5.6%), Heptadecane (4.85%). Quantum chemical calculations were applied on some of the identified constituents to assess their adsorbability on the mild steel surface and the result revealed remarkable high interaction energies.     

Antihypertensive drugs as an inhibitors for corrosion of aluminum and aluminum silicon alloys in aqueous solutions

The corrosion behavior of aluminum and three aluminum–silicon alloys in different concentrations of HCl solutions and its inhibition by antihypertensive drugs was studied using potentiostatic polarization measurements. As the acid concentration increases, the rate of corrosion increases. Aluminum is less susceptible to corrosion than any of Al–Si alloys. The inhibition efficiency of the drug compounds increases with their concentration up to a critical value. At higher additive concentrations the inhibition efficiency starts to decrease. The inhibitive action of these compounds is due to their formation of insoluble complex adsorbed on the metal surface. The adsorption follows Langmuir adsorption isotherms. It was found that the drugs compounds provide protection to Al and Al–Si alloys against pitting corrosion by shifting the pitting potential to more positive direction until critical drug concentrations (250 ppm). After this critical concentration the inhibition against to pitting corrosion starts to decrease.     

Adsorption and inhibition properties of Tephrosia Purpurea as corrosion inhibitor for mild steel in sulphuric acid solution

Abstract

The present study investigated the adsorption and inhibition behavior of leaf extract of Tephrosia Purpurea (T. purpurea) on mild steel corrosion in 1?N H₂SO₄ solution using electrochemical and surface morphological methods. Techniques adopted for electrochemical studies were Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy (EIS) technique; and surface morphological studies were carried out using Scanning Electron Microscopy (SEM), and Atomic Force Microscopy (AFM). The leaf extract of T. purpurea was characterized using UV-Visible spectroscopy (UV-Vis), Fourier-Transform Infrared Spectroscopy (FT-IR), Nuclear Magnetic Resonance Spectroscopy (NMR) and Gas Chromatography – Mass Spectrometry (GCMS). The results obtained from electrochemical studies exhibited the potential of T. purpurea as good corrosion inhibitor. And, it was found that, the inhibition efficiency (I.E in %) increases with increase in concentration of the inhibitor molecules, the optimum inhibitor concentration observed was 300?ppm and the inhibition efficiency of 93% was observed at this inhibitor concentration. Above 300?ppm, there was not much changes in inhibition efficiency. Polarization studies provided the information that the inhibition is of mixed type and EIS confirmed that the corrosion process is controlled by single charge transfer mechanism. And, it was obtained that, the adsorption of inhibitor molecules obeys Langmuir adsorption isotherm. The inhibition is mainly by the adsorption of inhibitor molecules on the mild steel electrode surface, which was confirmed by FT-IR, SEM and AFM studies. Through all the experimental results, it can be arrived that, the leaf extract of T. purpurea performed as a good corrosion inhibitor for mild steel in 1?N sulfuric acid medium.     

Study of electropolishing inhibition of steel using natural products as a green inhibitor in ortho-phosphoric acid

ABSTRACT

Anodic inhibition of steel in 8?mol?L^?1 H₃PO₄ was investigated in the absence and presence of different concentrations of extracts of Lawsonia inermis. An experimental measurement, including galvanostatic polarization studies, was done. The anodic corrosion rate and the inhibition efficiencies of the extract were calculated. The results obtained show that the inhibition was found to increase with increasing concentration of Lawsonia inermis extract. The inhibition actions of extracts are discussed on the basis of adsorption of Lawsonia inermis at the steel surface. Theoretical fitting of different isotherms were tested to clarify the nature of adsorption. Polarization curves revealed that Lawsonia inermis inhibitor acts as a corrosion inhibitor. The activation energy (E_a) as well as other thermodynamic parameters (ΔH*, ΔS*, ΔG*) for the inhibition process were calculated. These thermodynamic parameters show strong interaction between the inhibitor and the steel surface. The scanning electron microscope analysis study confirmed the adsorption of inhibitor molecules on the steel surface. The social organization and morphology of the extract were characterized by Fourier transform infrared spectroscopy.     

Extract sarampa wood (Xylocarpus Moluccensis) as an eco-friendly corrosion inhibitor for mild steel in HCl 1M

Plant extracts are currently being used as eco-friendly corrosion inhibitors. In this study, the inhibitive performance of Xylocarpus Moluccensis extract (XME) was used as an eco-friendly corrosion inhibitor for the first time. The extract was studied using electrochemical measurement on mild steel in 1M HCl. Results from FIR and phytochemical confirmed that Xylocarpus Moluccensis extract contains compound hydroxyl group, phenolic, and flavonoid content which can be used as a corrosion inhibitor. The inhibition efficiency was determined using Tafel polarization and electrochemical impedance spectroscopy and showed 68% efficiency in 500 ppm. Langmuir adsorption isotherm was used to determine the adsorption mechanism of XME. Surface characterization (AFM) was also used to study the surface morphology of protective film inhibitors.     

Synergistic inhibition effects between leaves and stem extracts of Sida acuta and iodide ion for mild steel corrosion in 1 M H2SO4 solutions

The synergistic action caused by iodide ions on the corrosion inhibition of mild steel in 1 M H₂SO₄ by leaves and stem extracts of Sida acuta was studied using weight loss and hydrogen evolution methods at 30–60 °C. It was found that the leaves and stem extracts of S. acuta inhibited the acid induced corrosion of mild steel. Addition of iodide ions enhances the inhibition efficiency to a considerable extent. The inhibition efficiency increases with increase in the iodide ion concentration but decreases with rise in temperature. Adsorption of the extracts alone and in combination of iodide ion was found to obey Freundlich adsorption isotherm at all temperatures studied. Inhibition mechanism is deduced from the temperature dependence of the inhibition efficiency as well as from assessment of kinetic and activation parameters that govern the processes. The synergism parameter (S₁) is defined and evaluated from the inhibition efficiency values. This parameter for the different concentrations of iodide ions from the two techniques employed is found to be greater than unity indicating that the enhanced inhibition efficiency of the extracts caused by the addition of iodide ions is due to synergism.     

Anti-corrosion and anti-microbial evaluation of novel water-soluble bis azo pyrazole derivative for carbon steel pipelines in petroleum industries by experimental and theoretical studies

In this research, we investigated the synthesis of a novel water-soluble bis azo pyrazolin-5-one (ABP) which was synthesized efficiently via the regioselective reaction of hydrazine with coumarin hydrazone (CMH). Also, we evaluate their anti-corrosion and anti-bacterial behavior. The inhibition efficiency of ABP in an acidic medium (1.0 M HCl) was evaluated using various electrochemical and surface morphology measurements. The novel bis pyrazole-based azo dye ABP (16 × 10^?6 M) demonstrated a higher protection capacity (93.3 %). Tafel curves revealed that ABP was a mixed-type inhibitor. The adsorption of ABP on the C-steel (CS) surface is proven by the alteration in (R_ct and C_dl) impedance characteristics and obeyed the Langmuir isotherm model. SEM/EDX, AFM, and XPS surface examinations confirmed the enhancement of an adsorbed film protects the CS surface from acid corrosion at the appropriate dose. Furthermore, theoretical calculations using DFT and MC simulations were performed to identify the active sites on ABP molecules in charge of the adsorption and surface protection of the CS. The adsorption of bis pyrazole-based azo dye on the metal surface explained the protection mechanism. Moreover, the ABP screened for its antimicrobial activity against sulfate-reducing bacteria (SRB), and the calculated inhibition efficiency was 100 %. The current work presents significant results in manufacturing and producing novel water-soluble bis pyrazole-based azo dye derivative with high anti-corrosion and anti-microbial efficiency.     

Ficus carica extract as environmentally friendly inhibitor for the corrosion of L-80 carbon steel in 0.5 ​M ​H2SO4 media

We reported here, the corrosion inhibition of carbon steel (CS) in H₂SO₄ media by Ficus carica leaves extract as green sustainable inhibitor. This study was investigated using mass loss method (ML), potentiodynamic polarization (PDP), electrochemical frequency modulation (EFM) and electrochemical impedance spectroscopy (EIS). As well as the metal surface morphology was analyzed by Atomic Force Microscopy (AFM). In addition, the chemical characterization of green inhibitor is carried out by Fourier Transform Infrared (FTIR). EIS revealed that the Ficus carica extract formed a thin protective film on the metal surface and by using of 300 ​ppm of extract of Ficus carica allow reaches (92.7%) of corrosion inhibition efficiency (CIE). The PDP curves revealed that the Ficus carica extract act as a mixed-type inhibitor. It was demonstrated that %IE enhanced with rising the Ficus carica extract doses also increased with arises in temperature (95.7%). Kinetic parameters and thermodynamic adsorption of the system have also been measured and studied. The data obtained revealed that the adsorption of Ficus carica on metal surface followed the Temkin isotherm and according to the activation energy (Ea1) the Ficus carica extract acts by chemisorption process. The results from unlike measurements were in a well accord.     

Corrosion inhibition of mild steel by highly stable polydentate schiff base derived from 1,3- propanediamine in aqueous acidic solution

Recently, the hydrolysis of Schiff bases under experimental conditions gives suspicion for their corrosion inhibition performance. The current study employs a stable Schiff base namely, 2,2′-{propane-1,3-diylbis[azanylylidene (E) methanylylidene]}bis(6-methoxyphenol) (LPD) as corrosion inhibitor for mild steel (MS) in 1 M HCl solution. The presence of the characteristic peak of the imine group in UV-visible spectra was taken as an indicator for LPD stability in acidic media. The inhibition action was examined using electrochemical techniques including potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) besides gravimetric measurement. The inhibition efficiency reached 95.93 % for 0.75 mM LPD after 24 h of immersion at 25 °C. This high efficiency is owing to the presence of the characteristic imine group and other heteroatoms and π- electrons of the aromatic benzene rings. The mechanism of inhibition depends on adsorption phenomena on mild steel surface which obeys Langmuir isotherm model. The calculated values of adsorption equilibrium constant (K_ads), adsorption free energy ΔG_ads, adsorption enthalpy ΔH_ads and adsorption entropy ΔS_ads indicated spontaneous exothermic adsorption process of both physical and chemical nature. By rising temperature, the inhibition efficiency of LPD was decreased. The calculated activation energy was increased as the concentration of LPD increased. LPD was considered as a mixed-type inhibitor as indicated from PDP measurements. The obtained surface morphology and composition analysis using SEM/EDS, AFM and FTIR techniques ensures the high efficiency of LPD as corrosion inhibitor.     

The litchi (Litchi Chinensis) peels extract as a potential green inhibitor in prevention of corrosion of mild steel in 0.5 M H2SO4 solution

The corrosion inhibition of mild steel in 0.5 M H₂SO₄ solution by the extract of litchi peel (Litchi chinensis) was studied by weight loss method, potentiodynamics polarization and electrochemical impedance spectroscopy (EIS). The results show that the litchi peels extract acts as mixed-type inhibitor. The inhibition of corrosion is found to be due to adsorption of the extract on metal surface, which is in conformity with Langmuir’s adsorption isotherm. UV–Vis, Fourier transform infrared (FT-IR) spectroscopy and Scanning electron microscopy (SEM) studies confirm that the inhibition of corrosion of mild steel occurs through adsorption of the inhibitor molecules.