Removal of phosphate by aluminum oxide hydroxide

The development and manufacture of an adsorbent to remove phosphate ion for the prevention of eutrophication in lakes are very important. The characteristics of phosphate adsorption onto aluminum oxide hydroxide were investigated to estimate the adsorption isotherms, the rate of adsorption, and the selectivity of adsorption. Phosphate was easily adsorbed onto aluminum oxide hydroxide, because of the hydroxyl groups. The adsorption of phosphate onto aluminum oxide hydroxide was influenced by pH in solution: the amount adsorbed was greatest at pH 4, ranging with pH from 2 to 9. The optimum pH for phosphate removal by aluminum oxide hydroxide is 4. The selectivity of phosphate adsorption onto aluminum oxide hydroxide was evaluated based on the amount of phosphate ion adsorbed onto aluminum oxide hydroxide from several anion complex solutions. It is phosphate that aluminum oxide hydroxide can selectively adsorb. The selectivity of phosphate onto aluminum oxide hydroxide was about 7000 times that of chloride. This result indicated that the hydroxyl groups on aluminum oxide hydroxide have selective adsorptivity for phosphate and could be used for the removal of phosphate from seawater.     

Effects of surface heterogeneity of oxides in simple ion adsorption at oxide/electrolyte interfaces

It has been shown that the adsorption of ions at oxide/electrolyte interface should be treated in terms of adsorption on a heterogeneous solid surface. This is because the adsorption runs via formation of complexes with surface oxygen atoms. Because of the small degree of oxide surface organization, different surface oxygens may have different status with respect to electrostatic interactions and the strength of the chemical bonds formed between the surface oxygens and the adsorbed protons or metal ions. We have shown that the equations describing the equilibria of formation of surface complexes can be transformed to Langmuir-like equations for multicomponent adsorption. One can apply, therefore, for these systems theoretical methods used to describe mixed-gas adsorption on heterogeneous solid surfaces.     

Sr掺杂对CaO(100)表面吸附甲醇影响的分子模拟

借助分子模拟手段,研究了锶掺杂对氧化钙表面甲醇吸附行为的影响。构建了甲醇在CaO(100)和CaO(100)-Sr表面吸附的模型,计算了甲醇在氧化钙表面的吸附能和解离活化能,分析了甲醇在氧化钙表面成键的态密度以及锶掺杂前后甲醇在氧化钙表面电荷布局和差分电荷密度,评估了锶掺杂量对氧化钙表面甲醇吸附性能的影响。结果表明,锶掺杂能够显著强化氧化钙对甲醇的吸附性能,降低甲醇的解离活化能,且吸附性能随锶掺杂量的增加而增强;甲醇在氧化钙表面吸附时活化,锶掺杂后活化程度增加。     

An in situ study of the adsorption behavior of functionalized particles on self-assembled monolayers via different chemical interactions

The formation of particle monolayers by convective assembly was studied in situ with three different kinds of particle-surface interactions: adsorption onto native surfaces, with additional electrostatic interactions, and with supramolecular host-guest interactions. In the first case carboxylate-functionalized polystyrene (PS-COOH) particles were assembled onto native silicon oxide surfaces, in the second PS-COOH onto protonated amino-functionalized (NH3+) self-assembled monolayers (SAMs), and in the third beta-CD-functionalized polystyrene (PS-CD) particles onto beta-CD SAMs with pre-adsorbed ferrocenyl-functionalized dendrimers. The adsorption and desorption behaviors of particles onto and from these surfaces were observed in situ on a horizontal deposition setup, and the packing density and order of the adsorbed particle lattices were compared. The desorption behavior of particles from surfaces was evaluated by reducing the temperature below the dew point, thus initiating water condensation. Particle lattices on native oxide surfaces formed the best hexagonal close packed (hcp) order and could be easily desorbed by reducing the temperature to below the dew point. The electrostatically modified assembly resulted in densely packed, but disordered particle lattices. The specificity and selectivity of the supramolecular assembly process were optimized by the use of ferrocenyl-functionalized dendrimers of low generation and by the introduction of competitive interaction by native beta-CD molecules during the assembly. The fine-tuned supramolecularly formed particle lattices were nearly hcp packed. Both electrostatically and supramolecularly formed lattices of particles were strongly attached to the surfaces and could not be removed by condensation.     

Scaling aspects of block co-polymer adsorption on curved surfaces from nonselective solvents

In this paper, we have developed a geometric-based scaling model that describes the adsorption of diblock copolymer chains from good solvents and theta-solvents onto reactive surfaces of varying curvatures. To evaluate the impact of particle size on the adsorption process, we probed the adsorption of poly(styrene-b-methymethacrylate) (PS-PMMA) diblock copolymers from solvents with different degrees of selectivity on aluminum oxide (Al(2)O(3)) surfaces belonging to particles of different sizes. When the adsorbed PMMA layer is dense enough (in the case of a theta-solvent for the PMMA block), our results show good correlation between the theory and experimental results, pointing to the formation of a PMMA adsorption layer and a brushlike PS layer. Conversely, when adsorption occurs from a nonpreferential solvent, particularly on particles with high curvature, the PMMA adsorption layer at the surface becomes less dense and the grafted PS moiety exhibits a transitional morphology consisting of several layers of increasingly sparsely spaced blobs.     

Adsorption state and morphology of anthraquinone-2-carboxylic acid deposited from solution onto the atomically-smooth native oxide surface of Al(111) films studied by infrared reflection absorption spectroscopy, X-ray photoelectron spectroscopy, and atomic force microscopy.

The adsorption state and morphology of anthraquinone-2-carboxylic acid (AQ-2-COOH) deposited from acetone solutions (0.02 - 1.00 mg ml(-1)) onto atomically-smooth native oxide surfaces of Al(111) films were investigated by infrared reflection absorption spectroscopy, X-ray photoelectron spectroscopy, and atomic force microscopy. The atomically-smooth oxide surfaces were prepared by vacuum evaporation of Al on mica substrates at 350 degrees C, followed by oxidation in an oxygen-dc glow discharge at room temperature. It was found that AQ-2-COOH is adsorbed on the film surfaces in both the neutral and ionized state, where the amount of the neutral molecules increases with increasing concentration. This molecule is adsorbed as both a uniform nanometer-scale film, and as micrometer-sized particles with heights ranging from 10 to 200 nm above the film surface. The volumes of the particles of deposited AQ-2-COOH increased with increasing concentration. It is concluded that the particles are microcrystallites of neutral AQ-2-COOH and that the thin uniform film results from AQ-2-COOH anion formation on the film surfaces. A comparison of the results obtained by use of these surface analytical techniques clearly shows the features and advantages of these tools.     

A biomimetic alternative to poly(ethylene glycol) as an antifouling coating: resistance to nonspecific protein adsorption of poly(L-lysine)-graft-dextran

Poly( L-lysine)- graft-dextran (PLL- g-dex), graft copolymers with dextran side chains grafted onto a poly( L-lysine) backbone, previously shown to be effective as stabilizers of DNA triple helices and as carriers of functional genes to target cells or tissues, were employed in this work to prevent nonspecific adsorption of proteins, as determined by means of optical waveguide lightmode spectroscopy. PLL- g-dex copolymers readily adsorb from aqueous solution onto negatively charged oxide surfaces and significantly reduce nonspecific protein adsorption onto bare silica-titania surfaces. While effective and equivalent surface adsorption and antifouling properties were observed for PLL- g-dex copolymers in a variety of architectures, nanotribological analysis by atomic force microscopy was able to distinguish between the different brush densities produced.     

Preferential adsorption of bovine serum albumin dimer onto polymer microspheres having a heterogeneous surface consisting of hydrophobic and hydrophilic parts

The adsorption behaviors of bovine serum albumin (BSA) containing both dimeric and monomeric species onto polymer microspheres were examined using various homopolymers and poly(2-hydroxyethyl methacrylate)/polystyrene composite microspheres which were produced by the emulsifier-free (seeded) emulsion polymerization technique. The preferential adsorption of the BSA dimer was clearly observed in an optimum region of the surface hydrophilicities of the polymer microspheres. The preferential adsorption of the BSA dimer onto the composite polymer microspheres having heterogeneous surfaces consisting of hydrophilic and hydrophobic parts was more marked than those onto the homopolymer and copolymer microspheres having homogeneous surfaces.     

Adsorption of poly(vinyl formamide-co-vinyl amine) (PVFA-co-PVAm) polymers on zinc, zinc oxide, iron, and iron oxide surfaces

The adsorption of poly(vinyl formamide) (PVFA) and the statistic copolymers poly(vinyl formamide-co-vinyl amine) (PVFA-co-PVAm) onto zinc and iron metal particles as well as their oxides was investigated. The adsorbates were characterized by means of XPS, DRIFT spectroscopy, wet chemical analysis, and solvatochromic probes. Dicyano-bis-(1,10-phenanthroline)-iron(II) (1), 3-(4-amino-3-methylphenyl)-7-phenyl-benzo-[1,2-b:4,5-b']difuran-2,6-dione (2), and 4-tert-butyl-2-(dicyano-methylene)-5-[4-(diethylamino)-benzylidene]-Δ(3)-thiazoline (3) as solvatochromic probes were coadsorbed onto zinc oxide to measure various effects of surface polarity. The experimental findings showed that the adsorption mechanism of PVFA and PVFA-co-PVAm strongly depends on the degree of hydrolysis of PVFA and pH values and also on the kind of metal or metal oxide surfaces that were employed as adsorbents. The adsorption mechanism of PVFA/PVFA-co-PVAm onto zinc oxide and iron oxide surfaces is mainly affected by electrostatic interactions. Particularly in the region of pH 5, the adsorption of PVFA/PVFA-co-PVAm onto zinc and iron metal particles is additionally influenced by redox processes, dissolution, and complexation reactions.     

A quartz crystal microbalance study of the adsorption of quaternary ammonium derivates on iron and cementite

The adsorption of alkyl trimethyl ammonium bromide with alkyl groups from C₁₀ to C₁₆ onto solid surfaces (iron and cementite (Fe₃C)) is investigated with and without NaCl. For the first time the adsorption of these surface active compounds onto model carbon steel compounds are measured directly by the use of a quartz crystal microbalance (QCM). The adsorption increases steeply around the critical micelle concentration (cmc) in bulk which was also determined for the homologous series. The adsorption of the higher homologues shows rather rigid surface structures while a detailed interpretation of the isotherms for the lowest homologues is disturbed by high bulk viscosities. Based on the obtained results, and in comparison with similar adsorbents on hydrophilic oxide surfaces, it is concluded that the surfactant is adsorbed patchwise in similar structures as in bulk. Finally, the possibilities for close-packing of the surfactant film are discussed.     

Human plasma protein adsorption onto dextranized surfaces: a two-dimensional electrophoresis and mass spectrometry study

Protein adsorption is fundamental to thrombosis and to the design of biocompatible materials. We report a two-dimensional electrophoresis and mass spectrometry study to characterize multiple human plasma proteins adsorbed onto four different types of model surfaces: silicon oxide, dextranized silicon, polyurethane and dextranized polyurethane. Dextran was grafted onto the surfaces of silicon and polyurethane to mimic the blood-contacting endothelial cell glycocalyx surface. Surface topography and hydrophobicity/hydrophilicity were determined and analyzed using atomic force microscopy and water contact angle measurements, respectively. Using two-dimensional electrophoresis, we show that, relative to the unmodified surfaces, dextranization significantly inhibits the adsorption of several human plasma proteins including IGHG1 protein, fibrinogen, haptoglobin, Apo A-IV, Apo A-I, immunoglobulin, serum retinal-binding protein and truncated serum albumin. We further demonstrate the selectivity of plasma protein adsorbed onto the different functionalized surfaces and the potential to control and manipulate proteins adsorption on the surfaces of medical devices, implants and microfluidic devices. This result shows that adsorption experiments using a single protein or a binary mixture of proteins are consistent with competitive protein adsorption studies. In summary, these studies indicate that coating blood-contacting biomedical applications with dextran is an effective route to reduce thrombo-inflammatory responses and to surface-direct biological activities.     

Assembly of alpha-helical peptide coatings on hydrophobic surfaces

The adsorption or covalent attachment of biological macromolecules onto polymer materials to improve their biocompatibility has been pursued using a variety of approaches, but key to understanding their efficacy is the verification of the structure and dynamics of the immobilized biomolecules. Here we present data on peptides designed to adsorb from aqueous solutions onto highly porous hydrophobic surfaces with specific helical secondary structures. Small linear peptides composed of alternating leucine and lysine residues were synthesized, and their adsorption onto porous polystyrene surfaces was studied using a combination of solid-state NMR techniques. Using conventional solid-state NMR experiments and newly developed double-quantum techniques, their helical structure was verified. Large-amplitude dynamics on the NMR time scale were not observed, suggesting irreversible adsorption of the peptides. Their association, adsorption, and structure were examined as a function of helix length and sequence periodicity, and it was found that, at higher solution concentrations, peptides as short as seven amino acids adsorb with defined secondary structures. Two-dimensional double-quantum experiments using (13)C-enriched peptide sequences allow high-resolution determination of secondary structure in heterogeneous environments where the peptides are a minor component of the material. These results shed light on how polymeric surfaces may be surface-modified by structured peptides and demonstrate the level of molecular structural and dynamic information solid-state NMR can provide.     

Time Resolved Chromatographic Study and Characterization of Gas-Solid Interfaces

The reversed flow – inverse gas chromatography is a simple and fast technique for the determination of kinetic and energetic parameters, for the degradation diagnosis describing the action of one or two gases simultaneously on a solid surface. The RF-IGC (or RF-GC) method was used to measure directly from experimental data, not only kinetic physicochemical quantities, but also adsorption energies, local monolayer capacities, local adsorption isotherms, the probability density function for the adsorption energies as distributed over the experimental time. This method has been applied by using n-hexane as probe gas and magnesium oxide, chromium oxide, silicon oxide and cadmium sulfide as solid adsorbents. In that way, one can be led to the characterization of heterogeneous surfaces and throw some light to the mechanism of heterogeneous reactions taking place in nature, as the deterioration of monuments and works of art by air pollutants, or in industrial processes.     

Investigating the mechanism of chiral surface reactions: the interaction of methylacetoacetate with (S)-glutamic Acid modified Ni{111}

The enantioselective hydrogenation of beta ketoesters over Ni-based catalysts is a rare example of a heterogeneously catalyzed chiral reaction. The key step in catalyst preparation is the adsorption from solution of chiral molecules (modifiers). One particularly interesting modifier is (S)-glutamic acid because the dominant enantiomeric product in the catalytic reaction depends upon the modification temperature. We report a reflection absorption infrared spectroscopy (RAIRS) study of the adsorption of methylacetoacetate (the simplest beta ketoester) onto (S)-glutamic acid modified Ni{111} surfaces as functions of the modifier coverage and modification temperature. We show that the sticking probability of methylacetoacetate is close to 0 on saturated (S)-glutamic acid covered surfaces. At lower modifier coverage, methylacetoacetate adsorption can occur. Adsorption of methylacetoacetate onto a Ni{111} surface modified by (S)-glutamic acid at 300 K results in the diketo tautomeric form, with evidence being observed for a 1:1 interaction between zwitterionic (S)-glutamate and methylacetoacetate. In contrast, adsorption of methylacetoacetate onto a Ni{111} surface modified by (S)-glutamic acid at 350 K occurs exclusively in the enol tautomeric form. The implications for the heterogeneous catalytic reaction are discussed.     

Entropic nature of the adsorption of sodium dodecylbenzenesulfonate on nanoparticles of aluminum and iron oxides in aqueous medium

The adsorption of anionic surfactant sodium dodecylbenzenesulfonate (SDBS) from aqueous solution on the hydrophilic surfaces of aluminum oxide and iron oxide nanoparticles is studied via UV spectrophotometry, electrophoretic light scattering, and isothermal microcalorimetry. It is shown that the isotherms of the adsorption of SDBS on the surfaces of both oxides in the area of concentrations up to 0.6 mmol/L is linear. It is found that the positive zeta potential of the surfaces of the particles falls to zero and shifts toward the range of negative values due to adsorption. The adsorption of SDBS is characterized by positive enthalpy values over the investigated range of concentrations, while the loss of energy during adsorption indicates it is of an entropic nature. It is concluded that the probable cause of the increase in entropy is the dehydration of SDBS molecules during on surface adsorption. The obtained results are discussed in terms of the formation of hemimicelles of surfactant on the hydrophilic surfaces of metal oxide nanoparticles in an aqueous medium.     

INTERACTIONS BETWEEN POLY(ETHYLENE OXIDE) COATED SURFACES AND BETWEEN SUCH SURFACES AND PROTEINS

Surfaces coated with poly(ethylene oxide) containing nonionic polymers are of interest in medical applications due to, among other things, the low adsorption of proteins on such surfaces. In this paper we have studied the interfacial properties of surfaces coated with PEO by measuring the forces acting between two such surfaces in water and across a protein solution as well as between one such surface and a surface carrying adsorbed proteins. One type of surface coating was a graft copolymer of poly(ethylene imine) and poly(ethylene oxide) where the cationic poly(ethylene imine) group anchored the polymer to negatively charged mica surfaces. Three different ways to prepare this coating was used and compared. It was found that this coating was not stable in the presence of lysozyme, a small positively charged protein, when the PEO graft density was low. The other type of coating was obtained by adsorbing ethyl(hydroxyethyl)-cellulose onto hydrophobised mica surfaces. The driving force for adsorption is in this case the hydrophobic interaction between nonpolar segments of the polymer and the surface. The EHEC coating was stable in the presence of lysozyme and the interactions between adsorbed layers of lysozyme and EHEC coated surfaces are purely repulsive due to long-range steric forces.     

The Effect of Pristine and Hydroxylated Oxide Surfaces on the Guaiacol HDO Process: A DFT Study

The acid-base character of oxide supports is crucial for catalytic reactions. In this work, the acid-base properties of five oxide surfaces common in heterogeneous catalysis were investigated and related to their interaction with monolignol compounds derived from lignin. We have used density functional theory simulations also to understand the role of the surfaces’ hydroxylation state. The results show that moderate hydroxyl coverage on the amphoteric γ-Al₂O₃ (110) slightly strengthens the oxy-compounds’ adsorption due to an increase in Lewis acidity. Similarly, low hydroxyl coverage on the reducible TiO₂ (101) enlarges its adsorption capacity by up to 42 % compared with its clean surface. The higher affinity is attributed to the more favourable interaction between the surface-OH groups and the aromatic rings. Overall, the results indicate that hydroxyl coverage enhances the amphoteric and reducible adsorption capacity towards aromatic species.     

Adsorption of humic acid onto carbonaceous surfaces: atomic force microscopy study

The adsorption of humic acid (HA) onto highly ordered pyrolytic graphite (HOPG) surfaces at different concentrations has been studied by atomic force microscopy. When HA concentration was increased from 10 to 1,000 mg/L, HA can sequentially form spherical particles, layered structures, and connected blocks on HOPG surfaces. The findings of the layer structures and small amount of fine chains have been verified and discussed. When HA was acidified by addition of acetic acid, it changed into small rigid particles. These results indicated that HA can be considered as supramolecular associations of self-assembling heterogeneous and relatively small molecules, and a small amount of polymers. The present results are important for understanding HA molecular structures and their adsorption characteristic on carbonaceous surfaces.     

Characterization of peptide adsorption on InAs using X-ray photoelectron spectroscopy

The well-defined structure and high stability of peptides make them attractive biotemplates for low-temperature synthesis of semiconductor nanocrystals. Adsorbed peptide monolayers could also potentially passivate semiconductors by preventing regrowth of the oxide layer. In this work, the adsorption and passivation capabilities of different collagen-binding peptides on InAs surfaces were analyzed by X-ray photoelectron spectroscopy (XPS). Before peptide functionalization, Br(2)- and HCl-based etches were used to remove the native oxide layer on the InAs surfaces. The presence of the N 1s peak for peptide-functionalized samples confirms the adsorption of peptides onto the etched InAs surfaces. Calculated coverages were similar for all peptide sequences and ranged from ～20 to 40% of a monolayer using the deconvoluted C 1s spectra and from ～2 to 5% for the N 1s spectra. The passivation ability of the peptides was analyzed by comparing the ratios of the oxide components to the nonoxide components in the XPS spectra. The thickness of the oxide layer was also approximated by accounting for the attenuation of the substrate photoelectrons through the oxide layer. We find that the oxide layer regrowth still occurs after peptide functionalization. However, the oxide layer thicknesses for peptide-functionalized samples do not reach as received levels, indicating that the peptides do have some passivation ability on InAs.