Graft Copolymerization of Methyl Methacrylate onto Nylon 6 Using Thallium(III) Ions as Initiator

Abstract

Graft copolymerization of methyl methacrylate onto nylon 6 was investigated in aqueous perchloric acid medium using thallium(III) ions as initiator. The rate of grafting was evaluated by varying the concentrations of monomer, initiator, acid, and temperature. The rate of grafting was found to increase with an increase of both monomer and initiator concentrations. The graft yield was found to increase with an increase in the acid concentration up to 0.49 mL^?1, and beyond this concentration of perchloric acid the graft yield was found to decrease. It also increased with an increase of temperature. From the Arrhenius plot the overall activation energy was found to be 3.9 kcal/mol. The effects of inhibitors, various solvents, inorganic salts, and swelling agents on graft yield were studied. A suitable kinetic scheme has been proposed and a rate equation has been derived.     

Grafting Vinyl Monomers onto Wool Fibers. VII. Graft Copolymerization of Methyl Methacrylate onto Wool Using Peroxydiphosphate-Thiourea Redox System

Graft copolymerization of methyl methacrylate onto wool was investigated in aqueous solution using the potassium peroxy-diphosphate-thiourea redox system as the initiator. The rate of grafting was determined by varying the monomer, peroxydi-phosphate ion, temperature, and solvent. The graft yield increases with increasing peroxydiphosphate ion up to 80 × 10^?-⁴ mol/L, and with further increase of peroxydiphosphate ion the graft yield decreases. The graft yield increases with increasing monomer concentration. The percentage of grafting decreases with increasing thiourea concentration. The rate of grafting increases with an increase of temperature. The effect of acid and water-soluble solvent and certain salts on graft yield has been investigated and a suitable rate expression has been derived.     

Grafting vinyl monomers onto wool fibers. III. Graft copolymerization of methyl methacrylate onto wool using hexavalent chromium ion

The use of hexavalent chromium to initiate graft copolymerization of methyl methacrylate onto wool fibers has been investigated. The rate of grafting was determined by varying monomer, chromium(VI), temperature, acidity of the medium, nature of wool, reaction medium, and redox system. The graft yield increases with increasing monomer concentration up to 0.65M, and, with further increase of monomer the graft yield decreases. The graft yield increases with increasing chromium(VI) concentration. The grafting is considerably influenced by chemical modification of wool prior to grafting. The effect of certain inorganic salt and anionic surfactant on the rate of grafting has been investigated. The graft yield is influenced by thiourea concentration; it decreases with increasing thiourea concentration.     

Grafting Vinyl Monomers onto Silk Fibers. XIII. Graft Copolymerization of Methyl Methacrylate onto Silk Using Fe3+−Cysteine Redox System

The graft copolymerization of methyl methacrylate onto silk fibers initiated by the ferric chloride-eysteine redox system has been investigated in aqueous medium. The rate of grafting was calculated by varying the concentrations of monomer, initiator, acidity of the medium, cysteine, and temperature. The percentage of grafting increases with an increase of Fe³⁺ concentration up to 2,5 × 10^?3 mol/L and thereafter it decreases. The graft yield increases steadily upon increasing the monomer concentration. The graft yield also increases with increasing cysteine concentration up to 0.5 × 10^?3 mol/L and then decreases. The effect of the perchloric acid concentration, temperature, solvents, and certain neutral salts on graft yield has also been investigated and a suitable reaction scheme has been proposed.     

Grafting Vinyl Monomers onto Silk Fibers: Graft Copolymerization of Vinyl Monomers onto Silk Using the Vanadyl Acetylacetonate Complex

Abstract

The graft copolymerization of methyl methacrylate (MMA) onto mulberry silk fibers was studied in aqueous solution using the acetylacetonate oxovanadium (IV) complex. The rate of grafting was investigated by varying the concentration of the monomer and the complex, the acidity of the medium, the solvent composition of the reaction medium, the surfactants, and the inhibitors. The graft yield increases with increasing concentration of the initiator up to 8.75 × 10^?5 mol/L, of the monomer up to 0.5634 mol/L, and thereafter it decreases. Among the various vinyl monomers studied, MMA was found to be most suitable for grafting. Grafting increases with increasing concentration of HCIO₄ and with increasing temperature. Inhibitors like picryl chloride and hydroquinone significantly decrease the extent of grafting. Alcoholic solvents at a solvents/water ration of 10:90 seem to constitute the most favorable medium for grafting. A suitable reaction scheme has been proposed, and the activation energy calculated from the Arrhenius plots.     

Coordination compounds of europium(III), terbium(III), dysprosium(III), samarium(III), and gadolinium(III) with 2-acetylbenzoic acid

LnAcbenz₃ · 3H₂O complexes of Eu³⁺, Tb³⁺, Dy³⁺, Sm³⁺, and Gd³⁺ with 2-acetylbenzoic acid (HAcbenz) have been synthesized. The complexes have been studied by thermogravimetry and infrared and luminescence spectroscopy. According to IR spectroscopy data, the complexation of Acbenz^? with lanthanide ions occurs due to the bidentate coordination of carboxyl groups. According to thermal analysis, the complexes are dehydrated at a temperature above 140°C, and their thermodestruction begins at a temperature above 250°C. From the luminescence spectra measured at 77 and 300 K, it has been established that the integral luminescence intensity of EuAcbenz₃ · 3H₂O and TbAcbenz₃ ° 3H₂O is, respectively, 10 and 19 times higher than for tris-benzoates of the same metals. TbAcbenz₃ ° 3H₂O, the most intensively luminescing complex, is recommended for use as a promising luminescent material.     

Grafting vinyl monomers onto silk fibers. IX. Graft copolymerization of methyl methacrylate onto silk using peroxydiphosphate-thiourea redox system

The graft copolymerization of methyl methacrylate (MMA) onto silk in aqueous media initiated by the potassium peroxydiphosphate-thiourea redox system was studied at 50°C. The rate of grafting was determined by changing [monomerl], [thiourea], [initiator], acidity of the medium, reaction medium, and temperature. A significant increase percent of grafting was noticed with increasing monomer concentration to 84.49 × 10^?2 mole/liter and the further increase is associated with the decrease of graft yield. The graft yield increases with an increase of thiourea (Tu) concentration to 25 × 10^?5 mole/liter; then it decreases. A measurable increase in graft yield was observed with an increase in acidity of the medium. Graft yield increases to a certain temperature, i.e., 50°C, and then it decreases. The graft yield increases with an increase of initiator concentration to 60 × 10^?4 mole/liter; then it decreases. The graft yield is medium dependent. A suitable kinetic path has been proposed and the rate equation has been derived.     

Grafting Vinyl Monomers onto Wool Fibers. X. Graft Copolymerization of Methyl Methacrylate onto Wool Using Acetylacetonato Complex of Manganese(lII)

The graft copolymerization of methyl methacrylate onto wool fibers was investigated in aqueous solution using the acetylacetonato complex of manganese(III). The rate of grafting was determined by varying the monomer, the complex, the temperature, the acidity of the medium, the nature of the wool, and the reaction medium. The graft yield increases with increasing monomer and complex concentrations. The graft yield also increases with increasing temperature. The grafting is considerably influenced by chemical modification of wool prior to grafting. A suitable mechanism has been proposed and a rate equation has been derived.     

Vinyl polymerization of acrylamide initiated by Thallium(III) ions in solution

Kinetics of polymerization of acrylamide initiated by Thallium(III) perchlorate was investigated in aqueous perchloric acid medium in the temperature range of 55–70°C. The rates of polymerization were measured varying the concentration of the monomer, initiator, and perchloric acid. The rate of polymerization was found to increase with increase of temperature, monomer concentration, initiator concentration, and perchloric acid concentration. The effect of additives like different solvents, surfactants, and retarders on the rate of polymerization was studied. Molecular weights of the polymer were determined by viscometry. The chain transfer constants for the monomer (C_M) and that for the solvent dioxan (C_s) were calculated to be 7.33 × 10^?3 and 6.66 × 10^?3, respectively. From the Arrhenius plot, the overall activation energy (E_a) was calculated to be 10.68 kcal/mol. The energy of initiation was calculated to be 12.36 kcal/mol. Depending on the results obtained, a suitable reaction mechanism has been suggested and a rate equation has been derived.     

Dimethylaniline (DMA)–Cu2+ ion system-induced graft polymerization of methyl methacrylate on viscose

Graft polymerization of methyl methacrylate on viscose fibers induced by the DMA–Cu²⁺ ion system was investigated under different conditions. Variables studied include concentration of DMA, Cu²⁺ ion, and MMA, reaction time, and temperature. There are optimal concentrations of DMA and Cu²⁺; below or above these concentrations lower grafting occured. Within 4 hr reaction time, the grafting reaction showed an initial fast rate followed by a slower one at 80°C. At 70°C, on the other hand, the graft yield increased in proportion to the increase in reaction time. Increasing the monomer concentration did not have a significant effect on the graft yield during the first 45 min of reaction. Beyond this, the effect of monomer concentration was marked.     

Graft copolymerization of 4-vinylpyridine onto cellulose using Co (III) acetylacetonate comlex in aqueous medium

The graft copolymerization of 4-vinylpyridine (4-VP) onto cellulose has been carried out in heterogeneous conditions with cobaltacetylacetonate complex (Co (acac)₃) under nitrogen atmosphere at 35±0.1°C in aqueous media. The grafting parameters such as graft yield, grafting efficiency, total conversion, frequency of grafting and rate of grafting have been evaluated as a function of concentration of 4-vinylpyridine, cobaltacetylacetonate and reaction temperature of graft copolymerization. Variation in concentration of monomer and initiator leads to a consistent increase in grafting parameters and then show a decreasing trend. The efficient grafting of monomer in presence of cobaltacetylacetonate complex is due to the coordination of the -electrons of the 4-vinylpyridine with the metal chelate which facilitate the homolytic decomposition of metal-oxygen bond to form radicals at relatively low temperature. The rate of graft copolymerization is directly proportional to the concentration of monomer and the square root of the concentration of the cobaltacetylacetonate complex. The activation energy (Ea) for graft copolymeriztion has been calculated using a Arrhenius plot and is 31.0kJ mol^–1 within the temperature range of 20–40°C. The grafting of 4-vinylpyridine has also been studied in presence of various additives and their effects have been suitably explained. On the basis of the experimental observations, reaction steps are proposed and rate expression has been derived.     

Grafting of Acrylamide On 1, 1, 2, 2-Tetra-Chloroethane Preswelled Polyethylene Terephthalate) Films Using Azobisisobutyronitrile Initiator

Abstract

Graft polymerization of acrylamide (AAm) on 1, 1, 2, 2 tetrachloro-ethane (TCE) preswelled poly(ethylene terephthalate) (PET) films were performed with chemical initiation method using asobisiso-butyronitrile (AIBN) initiator. Temperature was found to have a greater effect on the swelling then the swelling time. Variation of the graft yield with polymerization temperature, time, AIBN concentration, AAm concentration, AIBN and AAm inclusion times were investigated. The optimum temperature for grafting was found to be 70°CC. The graft yield was observed to increase with polymerization time, AAm concentration, initiator and monomer diffusion time up to a saturation graft yield and then leveled off. An increase in AIBN concentration first enhanced the percent grafting then showed a decrease. The addition of some salts (Ni²⁺, Cr³⁺, Co²⁺, Cu²⁺) on the rate of grafting was also investigated. From the temperature dependence of the initial rate of grafting, the overall activation energy was found to be 4. 1 kcal/mol and relevant rate equation have been derived. The effect of grafting on film propities, such as water absorption capacity, intrinsic viscosity were determined. Grafted films were characterized by FTIR spectros-copy and scanning electron microscopy (SEM).     

Graft polymerization kinetics of acrylamide initiated by ceric nitrate–dextran redox systems

The kinetics of the graft polymerization of acrylamide initiated by ceric nitrate—dextran polymeric redox systems was studied primarily at 25°C. Following an initial period of relatively fast reaction, the rate of polymerization is first-order with respect to the concentrations of monomer and dextran and independent of the ceric ion concentration. The equilibrium constant for ceric ion—dextran complexation K is 3.0 ± 1.6 l./mole, the specific rate of dissociation of the complex, k_d, is 3.0 ± 1.2 × 10^?4 sec.^?1, and the ratio of polymerization rate constants, k_p/k_t, is 0.44 ± 0.15. The number-average degree of polymerization is directly proportional to the ratio of the initial concentrations of monomer and ceric ion and increases exponentially with increasing extent of conversion. The initial rapid rate of polymerization is accounted for by the high reactivity of ceric ion with cis-glycol groups on the ends of the dextran chains. The polymerization in the slower period that follows is initiated by the breakdown of coordination complexes of ceric ions with secondary alcohols on the dextran chain and terminated by redox reaction with uncomplexed ceric ions.     

Polymerization of acrylamide and methacrylamide photoinitiated by azidopentamminecobalt(III) chloride

The kinetics of polymerization of acrylamide and methacrylamide, photoinitiated by azidopentamminecobalt(III) chloride in homogeneous aqueous acid medium was studied systematically. Monochromatic wavelengths 365, 405, and 435 mμ were employed for irradiation. Polymerization proceeded without any induction period, and the reaction was followed by measurements of rate of monomer disappearance (bromometrically), rate of complex disappearance (spectrophotometrically), and the chain lengths of the polymer formed (viscometrically). The dependences of the rate of polymerization on variables like light intensity, light absorption fraction by the complex, wavelength, monomer concentration, hydrogen ion concentration, nature of the acid used (HClO₄, HNO₃, and H₂SO₄), etc., were studied. The rate of polymerization of acrylamide depended on the unit power of monomer concentration and on the square root of light absorption fraction k_ε and light intensity I. The rate of methacrylamide polymerization was proportional to the unit power of monomer concentration and fractional powers of 0.25 and 0.30 of k_ε and I, respectively. A kinetic reaction scheme is proposed and discussed in the light of the experimental results, and it has been concluded that (1) the primary photochemical act is an electron transfer reaction from the azide ion to Co(III) in the complex, (2) initiation of polymerization is by azide radical, (3) termination is by mutual destruction of polymer radicals.     

Solvent “Goodness” in Polymer Separation by Flow

The graft copolymerization of methyl methacrylate onto silk fibers was investigated in aqueous solution using the V⁵⁺?thiourea redox system. The rate of grafting was determined by varying monomer, thiourea, acidity of the medium, temperature, initiator concentration, and reaction medium. The percentage of graft yield increases significantly by increasing the initiator concentration up to 0.01 M and thereafter decreases with a further increase of initiator concentration. The graft yield increases with an increase of thiourea concentration up to 10.0 × 10^?4 and then decreases with a further increase of thiourea concentration. The effect of increasing the monomer concentration brings about a significant enhancement in the graft yield. A suitable kinetic scheme has been proposed and the rate equation has been evaluated.     

Aqueous Polymerization of Methyl Methacrylate Initiated by Potassium Peroxydisulfate-Ascorbic Acid Redox System

The aqueous polymerization of methyl methacrylate initiated by the redox system K₂S₂O₈-ascorbic acid has been studied at 35°C under the influence of oxygen. The rate of polymerization increases with increasing ascorbic acid concentration at low activator concentration, remains constant within the range 4.375 × 10^?3 to 11.25 × 10^?3 mole/liter, and at higher ascorbic acid concentration again decreases. The rate varies linearly with monomer concentration. The initial rate and the limiting conversion increase with increasing polymerization temperature. Organic solvents (water-miscible only) and small amounts of neutral salts like KC1 and Na₂SO₄ depress the initial rate and the maximum conversion. The addition of small amounts of salts like Cu²⁺ and Mn²⁺ increases the initial rate, but no appreciable increase in the limiting conversion is observed.     

Aqueous polymerization of acrylonitrile initiated by manganese(III) pyrophosphate-thiocyanate redox system: a kinetic study

Summary The kinetics of aqueous polymerization of acrylonitrile monomer (M) initiated by the Mn^III-KNCS redox system have been studied under deaerated conditions in the temperature range 26–40 °C at constant ionic strength. The overall rates of polymerization and the disappearance of Mn^III were determined. The polymerization was initiated by the free radicals arising from the Mn^III-thiocyanate redox reaction. The rate of polymerization was investigated at various concentrations of monomer and initiator. The effects of varying [Mn^III], [NCS^–], pH, total [P₂O _inf7 ^sup4– ], added [Mn^II], metal ions, ClO _inf4 ^sup– , Cl^– and SO _inf4 ^sup2– were examined. Dependence of the rate of polymerization on temperature was studied and activation parameters were computed from an Arrhenius plot. A suitable kinetic scheme consistent with the observed results is proposed and discussed.     

A study of the graft copolymerization of methacrylic acid onto starch using the H2O2/Fe++ redox system

Graft copolymerization of methacrylic acid (MetAc) onto potato starch using H₂O₂/Fe⁺⁺ redox system was investigated. The best conditions of the grafting reaction were determined and several variables were studied: initiator and monomer concentrations, time, and temperature. Percent grafting efficiency, percent grafting, percent grafted monomer conversion, and total conversion were obtained. The optimum graft yield was obtained at 7.3 × 10^?3M H₂O₂ concentration and it was favored by increasing the methacrylic acid concentration and reaction time.     

Radiation-induced graft polymerization of styrene to poly(vinyl chloride)

The radiation-induced graft polymerization of styrene to poly(vinyl chloride) (PVC) was investigated. Relations between the rate of grafting and the dose rate when the polymer is irradiated in liquid monomer or in monomer vapor, and between the rate of grafting and monomer concentration absorbed in the polymer have been investigated. The rate of grafting in monomer vapor was found to be far larger than that in liquid monomer. A high rate of grafting in monomer vapor was thought to result from a lower concentration of monomer in PVC during irradiation. An experiment carried out on PVC containing the monomer at various concentrations showed that the rate is largest at a monomer concentration of about 3.5 mole/l. and is smaller for higher and lower concentrations. On the assumption that the theory of homogeneous homopolymerization can be applied to this grafting reaction, the value of k_p²/k_t has been obtained, where k_p and k_t are propagation constant and termination constant, respectively. The value of k_t greatly increases when the monomer concentration exceeds 3.5 mole/l. This increase of k_t can be accounted for if it is assumed that the monomer absorbed in the polymer works as a plasticizer and increases the molecular motion of the polymer. A measurement of the elastic modulus of PVC containing the monomer at various concentrations showed that this is, in fact, the case.     

Graft Copolymerization of 2‐Acrylamido‐2‐methyl Propane Sulfonic Acid on Dimethyl Sulfoxide Pretreated Poly(Ethylene Terephthalate) Films Using Cerium Ammonium Nitrate as Initiator

Abstract

In this study, graft polymerization of 2‐acrylamido‐2‐methyl propane sulfonic acid (AMPS) on poly(ethylene terephthalate) (PET) films using cerium ammonium nitrate (CeAN) as an initiator was investigated. Before the polymerization reaction was carried out, films were swelled in dimethyl sulfoxide (DMSO) at 140°C for 1 h. The effect of polymerization temperature, time, initiator, and monomer concentrations on the graft yield were investigated. It was observed that the graft yield was initially increased with increasing temperature, monomer, and initiator concentrations; and then decreased. Graft yield was found to increase with increasing polymerization time up to 5 h, then remain constant. The effects of monomer and initiator inclusions on the grafting yield were also examined. Optimum conditions for grafting were found to be [AMPS] = 1.0 M, [Ce⁴⁺] = 1.5 × 10^?2 M, T = 85°C and t = 5 h. The rate of grafting was found to be proportional to the 0.1 and 0.4 powers of monomer and initiator concentrations, respectively. The overall activation energy for the grafting was calculated to be 11.4 kcal mol^?1. The effect of grafting on PET film properties such as intrinsic viscosity and water absorption capacity were determined. The grafted PET films were characterized with FTIR spectroscopy and scanning electron microscopy (SEM).