Biodegradable aliphatic polyesters. Part I. Properties and biodegradation of poly(butylene succinate-co-butylene adipate)

A series of aliphatic homopolyesters and copolyesters was prepared from 1,4 butanediol and dimethylesters of succinic and adipic acids through a two-step process of transesterification and polycondensation. The synthesized polyesters were characterized by means of nuclear magnetic resonance spectroscopy (NMR), gel permeation chromatography (GPC), viscosity measurements, differential scanning calorimetry (DSC), X-ray diffraction (XRD), and mechanical property measurements. The homopolymer poly(butylene succinate) exhibited the highest tensile strength, which decreased with increasing adipate unit content, passed through a minimum at copolyester composition close to equimolarity and then increased towards the value of poly(butylene adipate). It is interesting to note that in contrast to tensile strength, the elongation at break increased for adipate unit content of 20-40 mol%. The biodegradation of the polymers was investigated by soil burial and enzymatic hydrolysis using three enzymes, Candida cylindracea lipase, Rhizopus delemar lipase, and Pseudomonas fluorescens cholesterol esterase. It appears that the key factor affecting material degradation was its crystallinity.     

Poly‐Schiff bases. V. Synthesis and characterization of novel soluble fluorine‐containing polyether azomethines

A new dialdehyde monomer, 4,4′‐(hexafluoroisopropylidine) bis(p‐phenoxy) benzaldehyde, was prepared; it led to a number of novel poly‐Schiff bases in reactions with different diamines, such as 4,4′‐diaminidiphenyl ether, 4,4′‐(isopropylidine) bis(p‐phenoxy) dianiline, 4,4′‐(hexafluoroisopropylidine) bis(p‐phenoxy) dianiline, and benzidine. The polymers were characterized with viscosity measurements, nitrogen analyses, and IR and ¹H NMR spectroscopy. These poly‐Schiff bases showed good thermal stability up to 491 °C for 10% weight loss in thermogravimetric analysis under air and high glass‐transition temperatures up to 215 °C in differential scanning calorimetry. These polymers were soluble in a wide range of organic solvents, such as CHCl₃, dimethylformamide (DMF), dimethyl sulfoxide, and 1‐methyl‐2‐pyrrolidon (NMP), and were insoluble in toluene and acetone. Thin films of these polymers cast from DMF exhibited tensile strengths up to 38 MPa. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 383–388, 2001     

Stimuli-Responsive Polymers in Solution Investigated by NMR and Infrared Spectroscopy

Summary: Temperature-induced and solvent composition-induced phase separation in solutions of poly(N-isopropylmethacrylamide) (PIPMAm) and other thermoresponsive polymers as studied by NMR and infrared (IR) spectroscopy is discussed. The fraction p of phase-separated units (units with significantly reduced mobility) and subsequently, e.g., thermodynamic parameters characterizing the coil-globule phase transition induced by temperature, were determined from reduced integrated intensities in high-resolution ¹H NMR spectra. This approach can be especially useful in investigations of phase separation in solutions of binary polymer systems. Information on behaviour of water during temperature-induced phase transition was obtained from measurements of ¹H NMR relaxation times of HDO molecules. NMR and IR spectroscopy were used to investigate PIPMAm solutions in water/ethanol (D₂O/EtOH) mixtures where the phase separation can be induced by solvent composition (cononsolvency). Some differences in globular-like structures induced by temperature and solvent composition were revealed by these methods.     

Structure and properties of new polyester elastomers composed of poly(trimethylene terephthalate) and poly(ethylene oxide)

Series of PTT-b-PEO copolymers with different composition of rigid PTT and PEO flexible segments were synthesized from dimethyl terephthalate (DMT), 1,3-propanediol (PDO), poly(ethylene glycol) (PEG, M_n = 1000 g/mol) in a two stage process involving transesterification and polycondensation in the melt. The weight fraction of flexible segments was varied between 20 and 70 wt%. The molecular structure of synthesized copolymers was confirmed by ¹H NMR and ¹³C NMR spectroscopy. The superstructure of these polymers was characterized by DSC, DMTA, WAXS and SAXS measurements. It was observed that domains of three types can exist in PTT-b-PEOT copolymers: semi-crystalline PTT, amorphous PEO rich phase (amorphous PEO/PTT blended phase) and semi-crystalline PEO phase. Semi-crystalline PEO phase was observed only at temperature below 0 °C for sample containing the highest concentration of PEO segment. The phase structure, thermal and mechanical properties are effected by copolymer composition. The copolymers containing 30÷70 wt% of PEO segment posses good thermoplastic elastomers properties with high thermal stability. Hardness and tensile strength rise with increase of PTT content in copolymers.     

Preparation of linear and hyperbranched fluorinated poly(aryl ether‐thioether) through para‐fluoro‐thiol click reaction

The para‐fluoro‐thiol “click” reaction (PFTCR) was utilized to prepare linear and hyperbranched fluorinated poly (aryl ether‐thioether). For this purpose, 1,2‐bis(perfluorophenoxy)ethane was prepared and reacted with 1,6‐hexandithiol and trimethylolpropane tris(3‐mercaptopropionate), respectively. While hyperbranched polymers were prepared using 0.5 M concentrations of starting materials at room temperature, the linear polymer syntheses were performed at different reaction temperatures and concentrations. The resulting polymers were mainly characterized by NMR measurements and a very distinct fluorine signals regarding meta‐ and ortho‐ positions in the ¹⁹F NMR were found for both polymer topologies. In addition to NMR analyses, both linear and hyperbranched polymers were further characterized by using Fourier transform infrared spectroscopy (FT‐IR), gel permeation chromatography (GPC), and differential scanning calorimetry (DSC). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1853–1859     

Microstructure determination of poly-(1,3-pentadiene) by a combination of infrared, 60-MHz NMR, 300-MHz NMR,and X-ray diffraction spectroscopy

A quantitative procedure has been developed for characterizing the complete microstructure of polymers of 1,3-pentadiene, including the tacticity of any crystalline component. This can be accomplished by a combination of infrared spectroscopy, X-ray crystallinity, and 300-MHz NMR spectroscopy. A series of high structural purity polymers were synthesized with a series of previously unreported mixed microstructures. These samples were characterized by using the three techniques mentioned, including the previously unreported 300-MHz NMR data. With those results a 60-MHz NMR/IR method of spectroscopy was developed to determine the composition of poly(1,3-pentadiene)s in terms of percent cis-1,2-, cis-1,4-, trans-1,4-, and 3,4-pentadiene units.     

Head-to-head vinyl polymers. VI. Preparation and characterization of head-to-head poly(allyl alcohol) and its esters

Head-to-head (H–H) poly(allyl alcohol) (PAA) was prepared by the LiAlH₄ reduction of H–H poly(methyl acrylate) obtained from the methylation of alternating copolymer of ethylene with maleic anhydride. H–H poly(allyl acetate) (PAAc) and H–H poly(allyl benzoate) (PABz) were further derived by means of its acylations. All of these three H–H polymers were characterized by IR, NMR, TGA, and PGC measurements. The corresponding head-to-tail (H–T) polymers were also prepared by a similar method from the conventional H–T polymer of methyl acrylate, and characterized to allow comparison with the H–H polymers. The softening temperatures of all H–H polymers were somewhat higher than those of the respective H–T polymers, probably suggesting that the H–H placements increased the stiffness of the polymers. Unlike poly(acrylic esters) reported previously, these H–H allyl polymers were found to degrade at temperatures slightly lower than the H–T polymers. On pyrolysis at 430°C, both PAAc and PABz were also observed to release predominantly acetic acid and benzoic acid, respectively, and small quantities of the corresponding allyl ester monomers. The molar ratios of acid to ester were substantially larger for H–H polymers.     

Miscibility-structure-property correlation in blends of ethylene vinyl alcohol copolymer and polyamide 6/66

Blends of ethylene vinyl alcohol (EVOH; 44 mol% ethylene) and polyamide 6/66 (PA; 75 mol% PA 6) random copolymers were studied in the entire composition range. Specific interaction between the components was analyzed by IR spectroscopy; furthermore, coefficients related to the Flory-Huggins interaction parameter were derived from equilibrium water uptake and tensile strength. Morphology of the blends was investigated by thermal analysis (DSC), density measurements, and SEM micrographs. The two polymers form heterogeneous blends in each composition. Although the components crystallize in separate phases, the morphology and the mechanical properties are greatly affected by the association of OH and NH groups. Crystallization is restricted in the blends, and the increase of the amorphous fraction, as well as specific interaction between the components, results in essential improvement in the mechanical properties.     

聚芳亚胺的合成、结构与性能

以不同的二碘化合物和芳香二胺为单体,通过两种不同的方法经缩聚反应得到了系列高分子量、低分布的聚芳亚胺。其结构由FT-IR, 1H NMR1和元素分析表征。由DSC和TG测定结果可知,该系聚合物具有较高的玻璃化转变温度(Tg＞150℃)和良好的热稳定性(TD＞400℃)。另外,该系聚合物还表现出良好的溶解性能。     

Effect of structure on properties of aromatic-aliphatic polybenzimidazoles. II

Polybenzimidazoles (PBI) with p-phenylene and/or cis-vinylene groups in the backbone were prepared from terephthalic acid (T), maleic acid (M), and 3,3′ diamino-benzidine tetrahydrochloride dihydrate (DAB) in poly(phosphoric acid) (PPA). Five polymer samples were prepared by varying the M:T molar ratios in the following order: 1:0, 1:1, 2:1, 1:2, and 1:4. The polymers were characterized by intrinsic viscosity, density, electronic fluorescence, and IR spectra. The effect of composition on the solubility of the polymers in various organic solvents was also investigated. The relative thermal stability of the polymers was evaluated by dynamic thermogravimetry in air and polybenzimidazoles (PBI) with cis-vinylene groups were found to be less stable.     

Synthesis and structure of polymerizable titanium complexes: elaboration of new mesoporous organometallic materials

Inertial confinement fusion (ICF) experiments generate a demand of specific organometallic materials, especially titanium-doped porous polymers obtained from specific Ti-containing monomers. Two new polymerizable titanium(IV) complexes were synthesized. Their free radical co-polymerization affords several titanium-containing polymers, which were dried under supercritical conditions to afford organic aerogels. The chemical compositions of these materials were investigated by NMR, IR, and elemental analysis while their structure was characterized by MEB-EDS and by N₂ adsorption/desorption isotherm measurements.     

Synthesis and Characterization of Novel Poly(Arylene Ether)s from 1,3‐bis(4‐Hydroxyphenyl) Benzene

Abstract

Several poly(aryl ether)s have been prepared by the condensation of 1,3‐bis(4‐hydroxy phenyl) benzene with different trifluoromethyl activated bis‐fluoro compounds. IR, ¹H and ¹³C NMR, and elemental analyses have established the resulting polymer structures. The properties of the polymers have been evaluated by DSC, TGA, dynamic mechanical analysis (DMA) and stress–strain analysis. The polymers 1a and 1c showed semi‐crystalline behavior as evident by sharp crystalline melting peaks at 299°C and 330°C along with glass transitions at 202°C and 216°C, respectively. The polymers showed very good thermal stability in air, high modulus, and high tensile strength with low elongation at break.     

Synthesis and characterization of new poly(ether amide)s based on a new cardo monomer

A new cardo diamine monomer 3, 3‐bis‐[4‐{2′trifluoromethyl 4′‐(4″‐aminophenyl) phenoxy} phenyl]‐2‐phenyl‐2, 3‐dihydro‐isoindole‐1‐one ( 4 ) has been synthesized from potentially cheap phenolphthalein as the starting material. This diamine was used for the synthesis of a new poly(ether amide) and two co‐poly(ether amide)s using 4, 4′‐diaminodiphenyl ether (ODA) as co‐monomer by direct solution polycondensation with 5‐t‐butyl iso‐phthalic acid. These new polymers showed inherent viscosities of 0.48–0.62 dL g^?1. The resulting poly(ether amide) and co‐poly(ether amide)s were readily soluble in polar aprotic solvents like NMP, DMF, DMAc, DMSO, and pyridine. The polymers have been fully characterized by ¹H and ¹³C NMR, FTIR spectroscopy, and elemental analysis. These polymers showed glass transition temperatures in the range of 267–310°C. Thermogravimetric analysis indicated high thermal stability of these polymers at 5 and 10% weight loss temperature in air above 357°C and 419°C, respectively. The poly(ether amide) films cast from DMAc were flexible with tensile strength up to 91 MPa, elongations at break up to 11%, and modulus of elasticity up to 1.82 GPa. X‐ray diffraction measurements indicate the amorphous nature of the poly(ether amide)s. Copyright © 2009 John Wiley & Sons, Ltd.     

Thermally stable and flame‐retardant aromatic phosphate and cyclotriphosphazene‐containing polyurethanes: synthesis and properties

A novel flame retardant (4‐diphenylphosphoryloxyphenoxy)(4‐hydroxyphenoxy)cyclotriphosphazene (PPPZ) was prepared and characterized by FT‐IR, ³¹P‐NMR and ¹H‐NMR spectroscopy. Polyurethanes that contained aromatic phosphate groups attached to cyclotriphosphazene, with various phosphorus contents, were prepared from PPPZ, poly(propylene glycol), 1,4‐butanediol, and 2,4‐toluene diisocyanate by one‐step polymerization. The polymers prepared were characterized by FT‐IR, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and oxygen index (LOI) measurements. The effect of the concentration of PPPZ on the thermal behavior of the polyurethane was studied. The results indicated that the glass transition temperature (T_g) of the polyurethane increased with the concentration of PPPZ. The PPPZ‐containing polyurethanes exhibited slightly higher temperatures of degradation and higher char yields than PPPZ‐free polyurethanes. Moreover, the LOI of the polyurethanes increased with increasing PPPZ content. Also studied was the possible mechanism of the flame retardancy. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis of formamidine-containing polymers from aromatic diamines

Aromatic polymers containing formamidine groups in the polymer backbone were obtained from aromatic diamines in high yields with α,α-dichloromethyl ether and triethylorthoformate. The latter was the reagent of choice. Soluble, high-molecular-weight products were obtained with m-phenylene diamine and 4,4′ bis(aminophenyl)methane. These polymers were characterized by viscosity, microanalysis, and nuclear magnetic resonance and infrared spectroscopy. Generally, insoluble products were obtained from p-phenylene diamine and 2,6-diaminotoluene, although small amounts of dimethylsulfoxide (DMSO)-soluble fractions could be extracted and examined by NMR spectroscopy. IR analysis of the insoluble fractions confirmed formation of polymers with the formamidine-containing structures. The synthetic procedures developed here make readily available this new class of aromatic polymers.     

Chemical Reactions on Polymers. II. Modification of Diene Polymers with Triazolinediones via the Ene Reaction

A wide variety of polymers and copolymers of 1,3-dienes have been modified at low temperatures via the ene reaction with 4-substituted l,2,4-triazoline-3,5-diones. The resulting modified polymers were characterized via infrared spectroscopy, nuclear magnetic resonance, intrinsic viscosity, gel-permeation chromatography, differential scanning calorimetry, solubility tests, and tensile measurements. Physical properties measurements support the postulate that the highly polar pendant urazole groups contribute inter molecular and intramolecular hydrogen-bonding interactions and thus impart to the modified polymers thermoplastic elastomer properties. Changes in the solubility character, thermal behavior, and tensile properties of the modified polymers are in accord with this postulate. Since the association between molecules is physical in nature, the modified polymers remain soluble in appropriate solvents. They also show dramatic decreases in molecular size; for example, the average molecular size of polymers at 1% modification is about one tenth that of the unmodified polymer due to intramolecular interactions, a size reduction of the same order of magnitude as that of chemically crosslinked polymers. Poly-1,2-butadiene, when modified to the extent of 5%, gave values for elongation to break, Young's modulus, and tensile strength twice those for the parent polymer, while tensile recoveries were > 90%.     

Synthesis of phenothiazine‐based electroluminescent polymers with a stable emission property

Two phenothiazine‐based polymers were synthesized by the Heck reaction of 3,7‐divinyl‐N‐octyl‐phenothiazine with 3,7‐diiodo‐N‐octyl‐phenothiazine and 5,8‐dibromo‐2,3‐diethylquinoxaline. The polymers were characterized by the measurements of ¹H‐NMR, IR, TG, GPC, CV, UV–Vis, and FL. The results indicated that the introduction of quinoxaline group makes the absorption, PL, and EL emission maxima red‐shifted. The EL emission maximum and the CIE 1931 coordinate value are stabilized at a constant value with the increase in operating voltages. Therefore, the polymers have a stable electroluminescent emission property. Copyright © 2008 John Wiley & Sons, Ltd.     

A novel and versatile potassium‐based catalyst for the ring opening polymerization of cyclic esters

Poly(lactide) (PLA), poly(ε‐caprolactone) (PCL) and poly(trimethylene carbonate) (PTMC) homopolymers of high molecular weight were prepared using potassium‐based catalyst. Polymerizations were carried out in toluene at room temperature. The chemical structure of the polymers was investigated by ¹H and ¹³C NMR. The physical properties investigated by GPC and DSC for the polymers obtained are similar to those prepared using tin octanoate based catalyst. Using a sequential polymerization procedure, PLA‐b‐PCL, PLA‐b‐PTMC, and PCL‐b‐PTMC diblock copolymers were synthesized and characterized in terms of their composition and physical properties. The formation of diblock copolymers was confirmed by NMR and DSC measurements. In vitro cytotoxicity tests have been carried out using MTS assay and the results show the biocompatibility of these polymers in the presence of the fibroblast cells. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5348–5362, 2008     

Synthesis and characterization of poly(N-acyl or N-aroyl ethylenimines) containing various pendant functional groups. I. Copolymers with pendant olefin groups

Decenyl (D) and heptyl (H) oxazolines were copolymerized in o-dichlorobenzene solvent using methyl 4-nitrobenzenesulfonate as an initiator. A series of decenyl/heptyl oxazolines random copolymers (or DH copolymers) with a total degree of polymerization of 100 and narrow molecular weight distribution were obtained. These copolymers are considered as the poly(N-acylethylenimine)s with allyl pendant groups randomly attached to the far end of their polymethylene, (SINGLE BOND)(CH₂)₇(SINGLE BOND), side chains. The polymers were characterized by NMR, FT–IR. Both DSC and x-ray diffractometer demonstrated that the polymers are highly crystalline. © 1996 John Wiley & Sons, Inc.     

Cyclopolymerization of Diethyl Dipropargylmalonate and Triethyl Dipropargylphosphonoacetate by Molybdenum Pentachloride

Abstract

The cyclopolymerization of two dipropargyl monomers having different functionality (diethyl dipropargylmalonate, triethyl dipropargylphosphoneacetate) was carried out by molybdenum (V) chloride catalyst system in chlorobenzene at 60°C. The polymerizations were well proceeded to give a high polymer yield (85–98%). The number average molecular weights (An of poymers were in the range of 46000–97000. These polymers were completely soluble in aromatic and halogenated hydrocarbon solvents and easily casted into a homogeneous polymer film. Various instrumental analyses such as NMR (¹H- and ¹³C-), IR, GPC, and UV-visible spectroscopies indicated that the present polymers have a highly conjugated polymer backbone structure. The tensile strength and failure strain of polymer film generally increased as the feed ratio of diethyl dipropargylmalonate in copolymer increased. On the other hand, the char yield of polymers increased significanly as the feed ratio of triethyl dipro-pargylphosphonoacetate in copolymer increased.