氨基吡啶树脂的合成及其对贵金属离子的吸附性

合成了三种氨基吡啶树脂(APR)。功能基含量3.22—3.71mmol-NH-C_5H_4N/gAPR,吸附容量614.8—665mg Au(Ⅲ)/gAPR。摩尔络合比Au(Ⅲ)/-NH-C_5H_4N=1.0,Pt(Ⅳ)/-NH-C_5H_4N=0.48。选择吸附性Pt(Ⅳ)>Au(Ⅲ)>Cd~(2+)>Zn~(2+)>Pd(Ⅱ)>Mn~(2+)、Cu(2+)、Fe~(3+).吸附的Au(Ⅲ)可用2％硫脲水溶液定量地洗脱,再生的4-APR可重复使用。氨基吡啶树脂有应用开发前景。     

Synthesis of N-Methyl-2-Thioimidazole Resin and Its Complex Behavior for Noble Metal Ions

The functional group capacity and the percentage of functional group conversion of crosslinked polystyrene resin bearing N-methyl-2-thioimidazole (MTIR) synthesized under optimum conditions are as high as 4.08 mmol/g resin and 96.0%, respectively. The apparent activation energies of sorption of MTIR for Au(III) and Pt(IV) are 13.1 and 13.4 kJ/mol, respectively. The sorption behavior of MTIR for Au(III), Pt(IV), and Pd(II) obeys the Freundlich and Langmuir isotherms. The sorption capacities of MTIR for Au(III), Pt(IV), and Pd(II) are as high as 4.33, 2.12, and 2.33 mmol/g resin, respectively. Au(III), Pt(IV), and Pd(II) adsorbed on MTIR can be eluted quantitatively by the eluant. The resin can be regenerated easily and reused without an obvious decrease in the sorption capacity for Au(III) and Pd(II). The resin has high sorption selectivity for noble metal ions. Au(III) can be separated quantitatively in the presence of high concentrations of Cu²⁺, Fe³⁺, Ni²⁺, and Mn²⁺. The recovery of platinum from the spent industrial catalysts is 98.6% by MTIR. The preconcentration and separation of palladium and platinum from the anode deposits of electrolysis of crude copper have been investigated. The resin may have potential industrial uses.     

1-(2-氨乙基)吡咯烷树脂的合成及其对贵金属的吸附

研究了试剂摩尔比、反应温度、反应时间对1-(2-氨乙基)吡咯烷树脂合成的影响规律.此树脂的功能基含量2.74 mmol/g树脂,对Au(Ⅲ)、Os(Ⅳ)、Pt(Ⅳ)、Ir(Ⅳ)、Ru(Ⅲ)、Pd(Ⅱ)的吸附容量分别高达950、520、436、418、314、302 mg/g树脂.FT-IR、元素分析表征了树脂结构.测定了吸附速率曲线,配位比,表观吸附活化能△E_(Au)=6.4、△E_(Pt)=33.7kJ/mol.XPS研究了吸附机理.     

Application of a macroporous resin containing imidazoline groups to preconcentration and separation of gold, platinum and palladium prior to ICP-AES determination

A new functional resin with a long functional side chain was synthesized by modification of aminated macroporous poly(vinyl chloride) resin with cyanoethylene and ethylenediamine. Traces of Au(III), Pt(IV) and Pd(II) in aqueous solution were quantitatively adsorbed in the acidity range of pH 4 and C(H(+)) 3 M. The rate of equilibration is high; Cu(2+), Fe(3+), Ni(2+), etc. exhibit little interference on the adsorption of the sought noble metals. The saturated adsorption capacities for Au(III), Pt(IV), Pd(II) and Ir(IV) in 2 M HCl were 4.0, 1.57, 2.26, 1.85 mmol g(-1). Adsorbed ions can be quantitatively desorbed by 4% thiourea +0.25 M H(2)SO(4). The resin has good reusability, and can be used for preconcentration and separation of Au(III), Pt(IV) and Pd(II) prior to their determination by ICP-AES with satisfactory results.     

含亚硫酸乙烯酯和碳酸乙烯酯功能基树脂的合成及其对贵金属离子的选择吸附性

制备了高功能基转化率的孪二羟基树脂,由此合成了含亚硫酸乙烯酯功能基(2.30毫摩尔/克树脂)和碳酸乙烯酯功能基(2.57毫摩尔/克树脂)的树脂4和5。在酸度范围内树脂4选择吸附Pt(Ⅱ),两者对Au(Ⅲ) 有高选择吸附性,而很少吸附共存的Pd(Ⅱ)、Pt(Ⅳ)及铁、钴、镍、铜、锰、锌、铅、镉等二价金属离子。树脂4对金的吸附容量为126(毫克 Au(Ⅲ)/克树脂),分配系数Kd为824(毫升/克),一次洗脱率达85％。树脂5的吸附容量为46.0(毫克 Au(Ⅲ)/克树脂),Kd为84.1(毫升/克)。两种树脂吸附Au(Ⅲ)的速率T_(1/2)分别为1、0.8小时.     

Analytical characterization of a silica gel sorbent with thioetheric sites

The sorption behavior of a newly synthesized silica gel sorbent with thioetheric sites (STS) towards microgram levels of Au(III), Pt(IV) and Pd(II) was studied. Au(III) is quantitatively (>95%) sorbed in the pH region of 1–9. The sorption of Pt(IV) starts at pH 1 and does not exceed 25% in the entire pH region examined. The sorption of Pd(II) starts at pH 7 and reaches 80% at pH 9. The sorption of Au(III) on STS at pH 1 is not affected by milligram amounts of Ni(II), Zn(II), Fe(III), Cu(II), Pb(II), Cd(II) or Co(II). Au(III) is quantitatively eluted with a 5% aqueous solution of thiourea. The adsorption capacity of STS towards Au(III) is 195 mg g⁻¹. The detection limit (DL) of Au(III) (3σ, n = 9) is 25 ng mL⁻¹. The RSD at a level of 10 × DL is about 2%. Solid-phase extraction of trace amounts of Au(III) on the STS sorbent, followed by its flame AAS determination in the eluate was applied to the determination of gold in geological samples. The results obtained for the gold content in the samples were in good agreement with those of the ICP-AES analysis.     

A chelating resin containing 1-(2-thiazolylazo)-2-naphthol as the functional group; synthesis and sorption behavior for trace metal ions

A new polystyrene-divinylbenzene resin containing 1-(2-thiazolylazo)-2-naphthol (TAN) functional group was synthesized and its sorption behavior for 19 metal ions including Zr(IV), Hf(IV) and U(VI) was investigated by batch and column experiments. The chelating resin showed a high sorption affinity for Zr(IV) and Hf(IV) at pH 2. Some parameters affecting the sorption of the metal ions are detailed. The breakthrough and overall capacities were measured under optimized conditions. The overall capacities of Zr(IV) and Hf(IV) that were higher than those of the other metal ions were 0.92 and 0.87 mmol/g, respectively. The elution order of metal ions at pH 4 was evaluated as: Zr(IV)>Hf(IV)>Th(IV)>V(V)>Nb(V)>Cu(II)>U(VI)>Ta(V)>Mo(VI)>Cr(III)>Sn(IV)>W(VI). Quantitative recovery of most metal ions except Zr(IV) was achieved using 2 M HNO₃. Desorption and recovery of Zr(IV) was successfully performed with 2 M HClO₄ and 2 M HCl.     

Selective extraction of U(VI), Th(IV), and La(III) from acidic matrix solutions and environmental samples using chemically modified Amberlite XAD-16 resin

A new grafted polymer has been developed by the chemical modification of Amberlite XAD-16 (AXAD-16) polymeric matrix with [(2-dihydroxyarsinoylphenylamino)methyl]phosphonic acid (AXAD-16-AsP). The modified polymer was characterized by a combination of ¹³C CPMAS and ³¹P solid-state NMR, Fourier transform-NIR-FIR-Raman spectroscopy, CHNPS elemental analysis, and thermogravimetric analysis (TGA). The distribution studies for the extraction of U(VI), Th(IV), and La(III) from acidic solutions were performed using an AXAD-16-AsP-packed chromatographic column. The influences of various physiochemical parameters on analyte recovery were optimized by both static and dynamic methods. Accordingly, even under high acidities (>4 M), good distribution ratio (D) values (10²–10⁴) were achieved for all the analytes. Metal ion desorption was effective using 1 mol L^–1 (NH₄)₂CO₃. From kinetic studies, a time duration of <15 min was sufficient for complete metal ion saturation of the resin phase. The maximum metal sorption capacities were found to be 0.25, 0.13, and 1.49 mmol g^–1 for U(VI); 0.47, 0.39, and 1.40 mmol g^–1 for Th(IV); and 1.44, 1.48, and 1.12 mmol g^–1 for La(III), in the presence of 2 mol L^–1 HNO₃, 2 mol L^–1 HCl, and under pH conditions, respectively. The analyte selectivity of the grafted polymer was tested in terms of interfering species tolerance studies. The system showed an enrichment factor of 365, 300, and 270 for U(VI), Th(IV), and La(III), and the limit of analyte detection was in the range of 18–23 ng mL^–1. The practical applicability of the polymer was tested with synthetic nuclear spent fuel and seawater mixtures, natural water, and geological samples. The RSD of the total analytical procedure was within 4.9%, thus confirming the reliability of the developed method.     

Separation and Recovery of Some Metal Ions Using Pan Sorbed Zinc Silicate as Chelating Ion Exchanger

Abstract

A new inorganic ion exchanger zinc silicate has been synthesized. Its properties such as ion exchange capacity, heat effect and stability etc. have been studied. Sorption of PAN over zinc silicate formed a chelate ion exchanger which showed greater selectivity for some metal ions especially for Cu²⁺, Ni²⁺, Co²⁺, Fe³⁺, Ag⁺, Ag³⁺ and Pt⁴⁺. Selectivity has been determined on the basis of distribution coefficients of these metal ions. Separations of Pt(IV) from Fe(III), Au(III) from Fe(III), Ag(I) from Cu(II) and Au(III) from Cu(II) have been reported. The recovery of Pt(IV) and Au(III) from dilute solutions has also been studied.     

Studies on the recovery of Pu(IV) from hydrochloric acid-oxalic acid solutions using an anion exchange method

Sorption of Pu(IV) from hydrochloric acid-oxalic acid solutions has been investigated using different anion exchangers, viz., Dowex-1X4, Amberlite XE-270 (MP) and Amberlyst A-26 (MP) for the recovery of plutonium from plutonium oxalate solutions. Distribution ratios of Pu(IV) for its sorption on these anion exchangers have been determined. The sorption of Pu(IV) from hydrochloric acid solutions decreases drastically in the presence of oxalic acid. However, addition of aluminium chloride enhances the sorption of plutonium in the presence of oxalic acid, indicating the feasibility of recovery of plutonium. Pu(IV) breakthrough capacities have been determined with a 10 ml resin bed of each of these anion exchangers at a flow rate of 60 ml per hour using a solution of Pu(IV) with the composition: 6M HCl+0.05M HNO₃+0.1M H₂C₂O₄+0.5M AlCl₃+100 mg.l^–1 Pu(IV). The 10% Pu(IV) breakthrough capacities for Dowex-1X4, Amberlite XE-270 (MP) and Amberlyst A-26 (MP) are 15.0, 8.9 and 6.2 g of Pu(IV) l^–1 of resin respectively.     

Insights into sorption species of Eu(III) on γ-Al2O3 and bentonite under different pH: Studies at macro- and micro-scales

The sorption species of Eu(III) on γ-Al₂O₃ and bentonite was investigated by batch, surface complexation model (SCM), and X-ray absorption spectroscopy (XAS). The results showed that sorption edges of Eu(III) on γ-Al₂O₃ and bentonite were as expected shifted forward high pH with the increasing in Eu(III) concentration, and sorption of Eu(III) was strongly dependent on pH. In γ-Al₂O₃ system, sorption of Eu(III) was decreased above pH 8.5 at low concentration of Eu(III) because of water soluble carbonate species of Eu(III), however the decline did not appear at high concentration of Eu(III) possibly due to a offset effect of surface precipitation. Actually, the sorption species of Eu(III) on bentonite mainly referred to at least four kinds of species including ion exchange (>X₃Eu⁰) at low pH, inner-sphere complexes (>AlOEu²⁺ and >SiOEu²⁺) at neutral condition, and hydrolysis species (>SiOEu(OH) ₂ ⁰ ) at alkaline condition. Linear combination fitting (LCF) in k space testified that hydrolysis of Eu(OH)₃(s) and oxide of Eu₂O₃ species were major for Eu(III) sorption on γ-Al₂O₃, whereas Eu³⁺(aq) and hydrolysis species comprised sorption species on bentonite. Extended X-ray absorption fine structure (EXAFS) analysis further confirmed the prediction from SCM and LCF. In addition, the typical shells of Eu–Al in R range of 3.0–3.4 Å and Eu–Si at ~4.0 Å were found in radial structure functions, which was possibly identified to edge-shared bidentate of Eu(III) on Al₂O₃ and bentonite.     

<Emphasis Type="Italic">N</Emphasis>-(2-(2-Pyridyl)ethyl)chitosan (PEC) for Pd(II) and Pt(IV) sorption from HCl solutions

Chitosan was modified by grafting 2-pyridyl-ethyl moieties on the biopolymer backbone for the synthesis of a Platinum Group Metal (PGM) sorbent. The sorbent was tested for Pd(II) and Pt(IV) sorption from HCl solutions. Stable for HCl concentrations below 0.5 M, the sorbent reached sorption capacities as high as 3.2 and 2.6 mmol metal g⁻¹ for Pd(II) and Pt(IV), respectively. Metal sorption mainly proceeds by electrostatic attraction in acidic solutions, though a contribution of complexation mechanism cannot be totally rejected. The resistance to intraparticle diffusion is the main controlling mechanism for uptake kinetics. While agitation speed has a limited effect on kinetics, metal concentration and sorbent dosage have a greater effect on the kinetic profiles. The intraparticle diffusivity varies between 3 × 10⁻¹¹ and 4.5 × 10⁻¹⁰ m² min⁻¹. Thiourea (combined with HCl solution) is used for Pd(II) and Pt(IV) desorption. The resin could be desorbed and recycled for a minimum of five cycles maintaining high efficiencies of sorption and desorption.     

The Substitution Reactions of the Small Biomolecules and Dinuclear Pt(II) Complexes with Alkanediamine Linker

The substitution reactions of the complexes [{trans‐Pt(NH₃)₂H₂O}₂(μ‐1,4‐diaminobutane)]⁴⁺ ( I ), [{trans‐Pt(NH₃)₂H₂O}₂(μ‐1,6‐diaminohexane)]⁴⁺ ( II ), and [{trans‐Pt(NH₃)₂H2O}₂(μ‐1,8‐diaminooctane)]⁴⁺ ( III ), with nucleophiles L‐cysteine (L‐Cys), glutathione (GSH), guanosine‐5′‐monophosphate (5′‐GMP), L‐histidine (L‐His), and pyridine were studied in 0.1 M NaClO₄ aqueous solutions at pH = 2.5. The substitutions were studied under pseudo‐first‐order conditions as a function of concentration and temperature using UV–vis spectrophotometry. At three different temperatures (288, 298, and 308 K) the reactions of the II and III complexes and 5′‐GMP were studied. The order of reactivity of study ligands is L‐Cys > GSH > 5′‐GMP > L‐His > pyridine and the order of reactivity of the complexes is I < II ≈ III . The obtained results indicate that the structure of the alkanediamine linker in the dinuclear Pt(II) complexes controls the substitution process. The negative values reported for entropy of activation confirmed the associative substitution mode. These results are discussed in order to find the connection between structure and reactivity of the dinuclear Pt(II) complexes.     

Ion flotation studies of the chlorocomplexes of some platinum group metals

The anionic chlorocomplexes of Au(III), Pt(IV), Pd(II), Ir(IV), Ir(III) and Rh(III) can be floated from aqueous solutions with cationic surfactants of the type RNR'₃Br. The flotation behavior of each metal is reported with respect to variations of hydrochloric acid and sodium chloride concentrations, the R and R' chain lengths, initial surfactant concentrations and initial metal ion concentrations. The flotation behavior of the metals is compared to the anion-exchange selectivity coefficients and a flotation selectivity sequence of Au(III) > Pt(IV), Ir(IV), Pd(II) > Ir(III) > Rh(III) is generally observed. Nearly 100% of Au(III), Pt(IV), Ir(IV) and Pd(II) can be recovered from dilute solutions using the ion flotation procedures.     

螯合树脂研究——Ⅷ.以聚硫醚为主链的氧杂多乙烯多胺型螯合树脂的合成及其吸附性能

由聚[2′-氯乙基-2,3-环硫丙基醚]和多乙烯声胺反应,合成了四种以聚硫醚为主链的氧杂多乙烯多胺型螯合树脂,它们对贵金属离子Au(Ⅲ)、Pd(Ⅱ)、Pt(Ⅳ)、Ag~+等具有优良的吸附性能。     

Extraction of U(VI), Th(IV), and La(III) from acidic streams and geological samples using AXAD-16–POPDE polymer

A new chromatographic extraction method has been developed using Amberlite XAD-16 (AXAD-16) resin chemically modified with (3-hydroxyphosphinoyl-2-oxo-propyl)phosphonic acid dibenzyl ester (POPDE). The chemically modified polymer was characterized by ¹³C CPMAS and ³¹P solid-state NMR, Fourier Transform–NIR–FIR–Raman spectroscopy, CHNPS elemental analysis, and thermogravimetric analysis. Extraction studies performed for U(VI), Th(IV), and La(III) showed good distribution ratio (D) values of approximately 10³, even under high acidities (1–4 M). Various physiochemical parameters that influence the quantitative metal ion extraction were optimized by static and dynamic methods. Data obtained from kinetic studies revealed that a time duration of 10 min was sufficient to achieve complete metal ion extraction. Maximum metal sorption capacity values under optimum pH conditions were found to be 1.38, 1.33, and 0.75 mmol g^–1 for U(VI), Th(IV), and La(III), respectively. Interference studies performed in the presence of concentrated diverse ions and electrolyte species showed quantitative analyte recovery with lower limits of analyte detection being 10 and 20 ng cm^–3 for U(VI) and both Th(IV) and La(III), respectively. Sample breakthrough studies performed on the extraction column showed an enrichment factor value of 330 for U(VI) and 270 for Th(IV) and La(III), respectively. Analyte desorption was effective using 15 cm³ of 1 M (NH₄)₂CO₃ with >99.8% analyte recovery. The analytical applicability of the developed resin was tested with synthetic mixtures mimicking nuclear spent fuels, seawater compositions and real water and geological samples. The rsd values of the data obtained were within 5.2%, thereby reflecting the reliability of the developed method.     

Highly efficient adsorbing noble metal ions by 3,4-dihydroxycinnamic acid-modified activated carbon

A method was established for the preconcentration of trace Au(III), Pd(II) and Pt(IV) by activated carbon modified with 3,4-dihydroxycinnamic acid. The separation and preconcentration conditions of analytes were investigated, such as effects of pH, the contacting time, the sample ?ow rate and volume, the elution condition and the interfering ions. At a pH of 1.0, the maximum static sorption capacity of the sorbent was found to be 374.8, 96.6 and 137.5 mg g^?1 for Au(III), Pd(II) and Pt(IV), respectively. The adsorbed metal ions were effectively eluted with 2.0 mL of 4% thiourea in 0.5 M HCl solution and determined by inductively coupled plasma optical emission spectrometry. The detection limit (3σ) of this method defined by IUPAC was found to be 0.12, 0.18 and 0.32 ?g L^?1 for Au(III), Pd(II) and Pt(IV), respectively. The relative standard deviation (RSD) was lower than 3.0% (n = 8) towards standard solutions. The method has been validated by analysing certified reference materials and successfully applied to the determination of trace Au(III), Pd(II) and Pt(IV) in road sediments samples.     

Amorphous and ordered organosilicas functionalized with amine groups as sorbents of platinum (II) ions

Two groups of amine-functionalized organosilicas have been synthesized: amorphous polysiloxane xerogels (APX) and ordered mesoporous organosilicas (OMO) by co-condensation of tetraethoxysilane and appropriate alkoxysilanes: aminopropyltriethoxysilane and N-[3-(trimethoxysilyl)propyl]ethylenediamine. The obtained materials were characterized by sorption measurements, X-ray diffractometry, elemental analysis, transmission electron microscopy, and scanning electron microscopy. The OMO samples have well developed porous structure—the values of specific surface area are in the range 740–840 m²/g. While the APX samples are less porous having the corresponding values in the range 280–520 m²/g. The sizes of the ordered mesopores of OMO are in the range 5.9–6.5 nm while for the APX they are 2.9–12.1 nm indicating structural differences between both groups of the samples. All samples were tested as the sorbents of Pt(II) ions. The influence of various parameters such as pH, contact time, equilibrium concentration on Pt(II) adsorption ability onto prepared adsorbents was studied in detail. Additionally, the effect of chloride concentration on Pt(II) adsorption was investigated. The values of static sorption capacities were in the range of 32–102 mg_Pt(II)/g and 20–139 mg_Pt(II)/g for OMO and APX series, respectively.     

Study of the Interaction of Some Potential Anticancer Gold(III) Complexes with Biologically Important Thiols Using NMR,UV–Vis,and Electrochemistry

The interaction of gold(III) complexes [Au(en)Cl₂]Cl, [Au(en)₂]Cl₃, [Au(cis‐DACH)Cl₂]Cl, and [Au(cis‐DACH)₂]Cl₃ (en = ethylenediamine, DACH = cis‐1,2‐diaminocyclohexane) with biologically important thiols, such as glutathione (GSH), dl ‐penicillamine (PSH), mercaptoacetic acid (MAA), and N‐(2‐mercaptopropionyl)glycine (MPG), has been studied using ¹H, ¹³C NMR, UV–vis spectroscopy and electrochemistry in aqueous solution. Kinetic data revealed that the reactivity of their substitution reaction followed the order: [Au(en)Cl₂]⁺ > [Au(en)₂]³⁺ > [Au(cis‐DACH)Cl₂]⁺ > [Au(cis‐DACH)₂]³⁺. The thiol reactivity increased with decreasing its size, viz. MAA ≫ MPG > PSH > GSH. Square wave stripping voltammetry displayed peaks for Au(III) and Au(I) at +0.875 V and +1.4 V respectively. The interaction of the complexes with thiols resulted in reduction of gold(III) to gold(I) and thiol ligands (RSH) were oxidized to disulfide (RSSR).     

ICP-OES determination of traces of Ru, Au, V and Ti preconcentrated and separated by a new poly(epoxy-melamine) chelating resin from solutions

A new poly(epoxy-melamine) chelating resin is synthesized from epoxy resin and used for the preconcentration and separation of traces of Ru(III), Au(III), V(V) and Ti(IV) ions from sample solutions. The ions analyzed can be quantitatively enriched by the resin at a flow-rate of 2 mL/min at pH 4, and quantitatively desorbed with 10 mL of 1 mol/L HCl + 0.2 g CS(NH₂)₂ at a flow-rate of 1 mL/min with recoveries of over 97%. The chelating resin can be reused 7 times without obvious loss of efficiency. Thousand-fold excesses of coexistent ions caused little interference during the enrichment and determination steps. The RSDs for the determination of 50 ng/mL Ru(III) and Au(III), 5.0 ng/mL V(V) and Ti(IV) were in the range of 1.5–4.5%. The recoveries of added standards in a real sample solution are between 96% and 100%, and the results for the ions analyzed in a nickel alloy sample are in good agreement with their reported values.