Thermal Degradation of Trioxane-Dioxqlane Copolymers Obtained with Boron Trifluoride-Acrylonitrile Complex as Initiator

The thermal degradation of certain trioxane-dioxolane copolymers obtained with boron trifluoride-acrylonitrile complex as initiator has been investigated. The thermal stability of samples, discussed in terms of topoenergetic values, was related both to copolymer composition and conversion. The most thermostable copolymers (～5% weight loss at 300°C in air), having 5–8% dioxolane units, had the highest intrinsic viscosity in the series and were isolated at 35–50% conversion. The results obtained were compared with similar data for a commercial tri-oxane-ethylene oxide copolymer containing 95% formal units.     

Melting Behavior of Thermostable Trioxane-Dioxolane Copolymers Obtained with Boron Trifluoride: Acrylonitrile Complex as Initiator

The splitting of DSC melting endotherms of thermostable trioxane-dioxolane copolymers obtained with boron trifluoride: acrylonitrile complex as initiator, which were recorded before and after the annealing of samples at 140°C, was believed to result from an amorphous-crystalline coupling phenomenon brought about by noncrystallizable dioxolane fragments. Quantitative interpretations were made based on the total melting enthalpy and splitting factors after precipitation of dioxolane sequences as crystalline defects by annealing. The results obtained were compared with similar data registered for a commercial trioxane containing copolymer, namely Hostaform C.     

New Trioxane Copolymers

Abstract

A review is given on two types of trioxane copolymers: trioxane/dioxolane copolymers and copolymers of trioxane with polar monomers. It has been possible to find reaction conditions that influence the transacetalization reaction and, hence, the molecular weight distribution and the sequence length of trioxane/dioxolane copolymers. Trioxane copolymers with varying dioxolane content show an unusual behavior with respect to density, specific volume, and melting point as a function of composition. This is possibly caused by the formation of at least four different crystal structures in such copolymers. The synthesis of polyoxymethylenes carrying reactive groups is possible by copolymerizing trioxane with substituted phenylglycidyl ethers. These copolymers can be subjected to further chemical modification leading to poly-oxymethylenes with aldehyde, carboxy, and amino groups or derivatives thereof.     

Poly(alkylene oxide) ionomers. XIII. Copolymers of trioxane with the epoxide and 1,3-dioxolane of methyl 10-undecenoate

Cationic copolymerization of 1,3,5-trioxane with methyl 10,11-epoxyundecanoate or methyl 7,8-epoxyoctanoate and terpolymerization with 1,3-dioxolane was successfully carried out. Co-and terpolymerization of 1,3,5-trioxane with 4-(1-carbomethoxynonyl)-1,3-dioxolane was also achieved. Feed compositions of the functional comonomers were varied from 5 to 40 mol %; in all cases the isolated copolymers contained less than 5% of the functional mer units. The composition of the copolymers showed that the methyl ω-epoxyalkanoates were much less reactive than 1,3,5-trioxane. A similar trend was observed with the functional dioxolane monomer, although significantly shorter induction periods were observed in comparison with the epoxy/trioxane copolymerizations. The oxymethylene copolymers and terpolymers were characterized primarily by their infrared spectra; however, the thermal and base stabilities of selected copolymers were also determined.     

Synthesis and characterizations of the four‐armed amphiphilic block copolymer S[poly(2,3‐dihydroxypropyl acrylate)‐block‐poly(methyl acrylate)]4

The polymers poly[(2,2‐dimethyl‐1,3‐dioxolane‐4yl) methyl acrylate] (PDMDMA) and four‐armed PDMDMA with well‐defined structures were prepared by the polymerization of (2,2‐dimethyl‐1,3‐dioxolane‐4yl) methyl acrylate (DMDMA) in the presence of an atom transfer radical polymerization (ATRP) initiator system. The successive hydrolyses of the polymers obtained produced the corresponding water‐soluble polymers poly(2,3‐dihydroxypropyl acrylate) (PDHPA) and four‐armed PDHPA. The controllable features for the ATRP of DMDMA were studied with kinetic measurements, gel permeation chromatography (GPC), and NMR data. With the macroinitiators PDMDMA–Br and four‐armed PDMDMA–Br in combination with CuBr and 2,2′‐bipyridine, the block polymerizations of methyl acrylate (MA) with PDMDMA were carried out to afford the AB diblock copolymer PDMDMA‐b‐MA and the four‐armed block copolymer S{poly[(2,2‐dimethyl‐1,3‐dioxolane‐4yl) methyl acrylate]‐block‐poly(methyl acrylate)}₄, respectively. The block copolymers were hydrolyzed in an acidic aqueous solution, and the amphiphilic diblock and four‐armed block copolymers poly(2,3‐dihydroxypropyl acrylate)‐block‐poly(methyl acrylate) were prepared successfully. The structures of these block copolymers were verified with NMR and GPC measurements. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3062–3072, 2001     

Submaximal interpenetration and bicontinuous three-dimensional channels in porous molecular networks

Crystallization of tetrakis(3,5-dihydroxyphenyl)silane (1) from various solvents produces structures built from interpenetrated hydrogen-bonded diamondoid networks. Crystals grown from hexane/methyl propiolate show 5-fold interpenetration, with no volume remaining for the inclusion of guests. In contrast, crystals grown from mixtures of hexane with ethyl acrylate, ethyl acetate, THF, or dioxolane all exhibit submaximal 3-fold interpenetration. Approximately 50% of the volumes are accessible to guests, which occupy regions of diamondoid topology that replace missing networks of tetraresorcinol 1. Of particular interest are crystals containing THF or dioxolane, in which guests occupy two independent systems of interpenetrating diamondoid channels. The submaximally interpenetrated structures of tetraresorcinol 1 provide detailed models of complex topologies adopted by block copolymers and amphiphilic assemblies to optimize interfacial contact.     

Free‐radical polymerization of dioxolane and dioxane derivatives: Effect of fluorine substituents on the ring opening polymerization

Partially fluorinated and perfluorinated dioxolane and dioxane derivatives have been prepared to investigate the effect of fluorine substituents on their free‐radical polymerization products. The partially fluorinated monomer 2‐difluoromethylene‐1,3‐dioxolane (I) was readily polymerized with free‐radical initiators azobisisobutyronitrile or tri(n‐butyl)borane–air and yielded a vinyl addition product. However, the hydrocarbon analogue, 2‐methylene‐1,3‐dioxolane (II), produced as much as 50% ring opening product at 60 °C by free‐radical polymerization. 2‐Difluoromethylene‐4‐methyl‐1,3‐dioxolane (III) was synthesized and its free‐radical polymerization yielded ring opening products: 28% at 60 °C, decreasing to 7 and 4% at 0 °C and −78 °C, respectively. All the fluorine‐substituted, perfluoro‐2‐methylene‐4‐methyl‐1,3‐dioxolane (IV) produced only a vinyl addition product with perfluorobenzoylperoxide as an initiator. The six‐membered ring monomer, 2‐methylene‐1,3‐dioxane (V), caused more than 50% ring opening during free‐radical polymerization. However, the partially fluorinated analogue, 2‐difluoromethylene‐1,3‐dioxane (VI), produced only 22% ring opening product with free‐radical polymerization and the perfluorinated compound, perfluoro‐2‐methylene‐1,3‐dioxane (VII), yielded only the vinyl addition polymer. The ring opening reaction and the vinyl addition steps during the free‐radical polymerization of these monomers are competitive reactions. We discuss the reaction mechanism of the ring opening and vinyl addition polymerizations of these partially fluorinated and perfluorinated dioxolane and dioxane derivatives. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5180–5188, 2004     

聚环氧乙烷大单体与丙烯酸乙酯的共聚及其规整接枝共聚物的表征

 本工作研完了末端为甲基丙烯酸酯型的聚环氧乙烷大单体与丙烯酸乙酯的溶液自由基共聚。结果表明,大单体接枝效率和共聚物分子量受单体总浓度、投料比、大单体分子量及引发剂等的影响,接枝效率最高可达90％以上,分子量可在5-15×10⁴范围内变化。丙烯酸乙酯与大单体共聚的竞聚率为0.83。共聚物用萃取法精制后,用IR、¹H-NMR、裂解色谱、GPC和膜渗透压计等进行了表征。证实产物有预期的规整接枝共聚物结构。平均接枝数为2—11。     

Radiation-induced copolymerization of trioxane: Reactivities of some cyclic ether comonomers

Copolymerization of trioxane solid state induced by gamma radiation with oxycyclic comonomers such as penta acetyl glucose, tetrahydrofuran, styrene oxide, and 1,3 dioxolane has been reported. The relative yields, properties of the copolymers, and the reactivities of the comonomers are discussed. A mechanism for the reactivity is presented.     

Novel functional initiators for oxazoline polymerization

The initiating behavior of the functional tosylates 1 – 4 and triflates 5 and 6 for the cationic ring‐opening polymerization of 2‐methyl‐1,3‐oxazoline was investigated. The emphasis was directed at tosylates and triflates with 2,2‐dimethyl‐1,3‐dioxolane‐, 2,3‐epoxypropyl‐, 2,3‐didodecanoyl‐glycerol‐, and cholest‐5‐en‐moieties that allow the construction of amphiphilic polyoxazoline conjugates. The tosylates were prepared by a simple reaction of the corresponding alcohols with p‐toluenesulfonyl chloride, whereas the preparation of the corresponding triflates required low temperature and the use of 2,6‐di‐tert‐butylpyridine as a sterically hindered base. Among the initiators tested, 2,2‐dimethyl‐(4‐trifluoromethanesulfonyloxymethyl)‐1,3‐dioxolane 6 gave the best results in respect to molecular weight and polydispersity. Starting from the corresponding functional oxazoline polymers obtained with 6 as an initiator, amphiphilic lipid‐polyoxazoline conjugates with a diacylglycerol backbone could be prepared. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2821–2831, 2001     

Synthesis and polymerization of a novel perfluorinated monomer

Perfluoro(5-methylene-2,2-dimethyl-1,3-dioxolane) (1) was synthesized by utilizing a direct fluorination reaction. Compound 1 was an entirely novel monomer with difluoromethylene at position 5 on the dioxolane ring as an unprecedented polymerization site. It successfully polymerized with tetrafluoroethylene to afford copolymers, which had T_g values in the range of 60-90 °C. The content of monomer 1 in the obtained polymers was less than 20 mol%, which seemed insufficient for giving various unique properties to polymers. However, each polymer was expected to be a superior material because of their advanced thermal stability. Comparison with copolymers of 2,2-bis(trifluoromethyl)-4,5-difluoro-1,3-dioxole and tetrafluoroethylene is also discussed.     

Well defined polymer structures by ionic ring-opening polymerization of cyclic monomers comprising the respective structure

Ring-opening polymerization of cyclic monomers is the method of choice when tailor-made polymers and copolymers with heteroatoms in the main chain are to be prepared. Triblock copolymers comprising a poly(ethylene oxide) block [poly(EO)] and two poly(2,2-dimethyltrimethylene carbonate) blocks [poly(DTC)] were prepared using a telechelic poly(EO) as initiator for the DTC polymerization. These block copolymers dissolve suitable salts leading to solid polymeric electrolytes. The thermal properties and the ionic conductivity of these materials are presented. Block copolymers comprising a poly(tetrahydrofuran) block [poly(THF)] and a poly(trimethylene urethane) block [poly(TU)] were obtained by sequential cationic polymerization of THF and TU with methyl trifluoromethane-sulfonate as initiator. Mechanistic and kinetic aspects of the TU polymerization are discussed. To achieve the synthesis of block copolymers with a poly(L-lactide) block [poly(LLA)] and a poly(α-amino acid) block [poly(AA)] amino-terminated poly(LLA) was prepared which served as initiator for the polymerization of α-amino acid N-carboxyanhydrides.     

Synthesis and Properties of Hydrophilic Copolymers Containing 5-Fluorouracil,Thymine, or Adenine

Hydrophilic copolymers containing 5-fluorouracil (5-FU), thymine, or adenine were prepared by the free-radical copolymerization of methacryloyl-type monomers containing them with water-soluble vinyl monomers such as acrylic acid, methacrylic acid, vinylpyrroli-done, acrylamide, and 4(5)-vinylimidazole with AIBN as initiator. Complex formation between the copolymers and RNA and between the copolymers having complementary nucleic acid bases in aqueous solution and a DMSO-ethylene glycol was studied by means of UV spectroscopy. These copolymers were found to release the N-hydroxyethyl derivatives of 5-FU, thymine, or adenine by hydrolysis of the ester of the polymer side chain under mild conditions. The effects of the kind of water-soluble comonomer, temperature, pH, and the imidazole group as catalyst on the hydrolysis of the ester are discussed.     

The TIT-Inifer Method of synthesis of block copolymers

A two-step free radical method of synthesis of block copolymers, called TIT-Inifer Method is proposed. In the method, specially designed initiators/transfer agents of the general formula TIT (called herein: TIT-Inifers) are used, where: T represents transfer groups, I is an initiator fragment, and SPACER is any skeleton, that separates the radical center formed at T during transfer reaction from interaction with the initiator fragment. In the first step of the method, a monomer A is polymerized in the presence of a TIT-Inifer at some temperature T₁, at which the initiator fragment of the inifer is stable. In that step the TIT-Inifer acts as a transfer agent, so that the initiator fragment gets incorporated into polymer chain to yield a macroinitiator. In the second step of the method, the macroinitiator is used to initiate polymerization of a monomer B at a temperature T₂, at which the initiator groups of the macroinitiator cleave. Depending of the mode of termination of growing polymer chains, AB-type or ABA-type block copolymers are obtained as the major product, altogether with some amount of homopolymers resulting from side reactions of macroradicals. Two example TIT-Inifers were designed and their application for synthesis of block copolymers was studied. It was found that the TIT-Inifer Method was effective for preparation of block copolymers. Aspects of the mechanism by which the TIT-Inifers attach initiator groups to polymer chains and applicability of the TIT-Inifer Method for large-scale production of block copolymers are discussed. © 1996 John Wiley & Sons, Inc.     

RAFT聚合合成高分子量嵌段聚合物

以合成高分子量聚合物为目标,以苯基二硫代乙酸-1-苯基乙酯(PEPDTA)作为RAFT试剂,研究引发剂的种类(偶氮二异丁腈(AIBN)、1-1′-偶氮环己腈(ACC))、用量及聚合温度对苯乙烯/丙烯酸丁酯RAFT共聚合过程和聚合物结构的影响.结果发现,由于体系中RAFT浓度很低,相应的引发剂浓度要比传统自由基聚合低得多,只有采用较高的聚合温度和低分解速率常数的引发剂(ACC),才能制得无活性聚合物分率低(<0.1)、分子量高的聚合物,并进一步得到杂质含量少、分子量分布窄的嵌段聚合物.     

Novel amorphous perfluorocopolymeric system: Copolymers of perfluoro‐2‐methylene‐1,3‐dioxolane derivatives

Perfluorotetrahydro‐2‐methylene‐furo[3,4‐d][1,3]dioxole (monomer I ) and perfluoro‐2‐methylene‐4‐methoxymethyl‐1,3‐dioxolane (monomer II ) are soluble in perfluorinated or partially fluorinated solvents and readily polymerize in solution or in bulk when initiated by a free‐radical initiator, perfluorodibenzoyl peroxide. The copolymerization parameters have been determined with in situ ¹⁹F NMR measurements. The copolymerization reactivity ratios are r _I = 1.80 and r _II = 0.80 in 1,1,2‐trichlorotrifluoroethane at 41 °C and r _I = 0.97 and r _II = 0.85 for the bulk polymerization. These data show that this copolymerization pair has a good copolymerization tendency and yields nearly ideal random copolymers. The copolymers have only one glass‐transition temperature from 101 to 168 °C, depending on the copolymer compositions. Melting endotherms have not been observed in their differential scanning calorimetry traces, and this indicates that all the copolymers with different compositions are completely amorphous. These copolymers are thermally stable (the initial decomposition temperatures are higher than 350 °C under an N₂ atmosphere) and have low refractive indices and high optical transparency from UV to near‐infrared. Copolymer films prepared by casting were flexible and tough. These properties make the copolymers ideal candidates as optical and electrical materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1613–1618, 2006     

Kinetics of the solution polymerization of dioxolane in the presence of water

Water acts as a cocatalyst in the polymerization of dioxolane initiated by the ion pair ～Si^⊕HSO₄^?. The dependence of the reaction rate on the water concentration exhibits a maximum, the width of which strongly depends on the concentration of dioxolane. The change of the coordinates of the maximum and its shape with the decrease of the monomer concentration causes the reaction rate to decrease with increasing conversion. The point at which the slope of the conversion curve changes is a function of initial concentration of water. There is a very fast decrease of the concentration of free water in the polymerizing system. The consumption of water is associated with some peculiarities. The amount of free water which remains in the system is a function of the concentration of the original initiator. The ratio [H₂O]_∞/[initiator] is constant over a rather broad range of initial concentration of water.     

The preparation and properties of BAB block copolymers based on polyethylene sulphide and polyisoprene

Block copolymers of ethylene sulphide (B) and isoprene (A) have been prepared by anionic synthesis using alkali metal complexes of naphthalene as initiator. Two series of block copolymers have been synthesized, one (based on sodium naphthalenide as initiator) having high molecular weights and the other (based on lithium naphthalenide) having low molecular weights.Physical properties of the block copolymers as a function of composition, molecular weight and polyisoprene microstructure have been studied. Polymers containing high molecular weight polyethylene sulphide sequences were difficult to process without degradation. By lowering the molecular weight of the polyethylene sulphide segment, block copolymers of improved processibility were obtained.The centre block polyisoprene microstructure has been varied from 100% 1,2/3,4 configuration to 80% 1,4 configuration by preparing a “seed” polymer in tetrahydrofuran followed by solvent removal and replacement by hexane. Changes in microstructure affect low temperature flexibility, resilience and tensile strength of the block copolymer.The BAB block copolymers are biphasic and exhibit elastomeric properties with improved network stability compared with polystyrene-polybutadiene-polystyrene ABA block copolymers.     

Branched and Self-Crosslinkable Poly(methyl methacrylate)s Prepared via One-Pot Synthesis in Aqueous Emulsion

An approach to the synthesis of highly branched vinyl copolymers containing thiol and C=C crosslinking groups is proposed. This method was exemplified by the emulsion copolymerization of methyl methacrylate (MMA) and 1,6-hexanediol diacrylate (HDDA) with 2-mercaptoethyl sulfide (MES) as chain transfer agent at 70°C with 4,4′-azobis(4-cyanovaleric acid) (ACVA) as the initiator. The resulting highly branched copolymers contain both thiol and acryloyl groups. The apparent M_w (by SEC) of the resulting copolymers increased with increasing ACVA concentration, whereas the pendent acryloyl and -SH groups decreased from 6.4% to 0.8% (relative to MMA units) and 45 ×10^?5 to 5 × 10^?5 mol/g, respectively. The copolymers of MMA could be self-crosslinked thermally or by exposure to UV irradiation. The gel fraction of the thermally treated samples decreased from 46% to 7.2%, with the increasing of ACVA in the polymer synthesis, while the gel fraction of UV irradiated samples changed only slightly around 70%.     

A TEMPO-mediated “living” free-radical approach to ABA triblock dendritic linear hybrid copolymers

Dumbbell-shaped ABA triblock copolymers composed of benzyl ether dendrons and polystyrene as the A and B blocks, respectively, were prepared using 2,2,6,6-tetramethylpiperidinyl-1-oxy (TEMPO) -mediated “living” free-radical polymerization. A new bis-dendritic unimolecular initiator, compound 3, was employed to study the efficiency of ABA triblock formation under standard TEMPO-mediated polymerization conditions. By this design, the central B block of the ABA triblock copolymer was grown into the bis-dendritic unimolecular initiator. The ABA triblock copolymer products were separated from their by-products, AB diblock copolymers, by column chromatography on silica gel. The isolated copolymers were characterized using gel permeation chromatography and proton nuclear magnetic resonance spectroscopy as complimentary techniques. That the dendritic-linear AB diblock copolymer was obtained in a mixture with ABA triblock material indicates that TEMPO-terminated dendron counter-radical 5 is an imperfect mediator of this free-radical polymerization. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3748–3755, 1999