Synthesis and utilization of monodisperse hollow polymeric particles in photonic crystals

We developed a process to fabricate 150-700 nm monodisperse polymer particles with 100-500 nm hollow cores. These hollow particles were fabricated via dispersion polymerization to synthesize a polymer shell around monodisperse SiO(2) particles. The SiO(2) cores were then removed by HF etching to produce monodisperse hollow polymeric particle shells. The hollow core size and the polymer shell thickness, can be easily varied over significant size ranges. These hollow polymeric particles are sufficiently monodisperse that upon centrifugation from ethanol they form well-ordered close-packed colloidal crystals that diffract light. After the surfaces are functionalized with sulfonates, these particles self-assemble into crystalline colloidal arrays in deionized water. This synthetic method can also be used to create monodisperse particles with complex and unusual morphologies. For example, we synthesized hollow particles containing two concentric-independent, spherical polymer shells, and hollow silica particles which contain a central spherical silica core. In addition, these hollow spheres can be used as template microreactors. For example, we were able to fabricate monodisperse polymer spheres containing high concentrations of magnetic nanospheres formed by direct precipitation within the hollow cores.     

Dual latex/surfactant templating of hollow spherical silica particles with ordered mesoporous shells

Hollow spherical silica particles with hexagonally ordered mesoporous shells are synthesized with the dual use of cetyltrimethylammonium bromide (CTAB) and unmodified polystyrene latex microspheres as templates in concentrated aqueous ammonia. In most of the hollow mesoporous particles, cylindrical pores run parallel to the hollow core due to interactions of CTAB/silica aggregates with the latices. Effects on the product structure of the CTAB:latex ratio, the amount of aqueous ammonia, and the latex size are studied. Hollow particles with hexagonally patterned mesoporous shells are obtained at moderate CTAB:latex ratios. Too little CTAB causes silica shell growth without surfactant templating, and too much induces nucleation of new mesoporous silica particles without latex cores. The concentration of ammonia must be large to induce co-assembly of CTAB, silica, and latex into dispersed particles. The results are consistent with the formation of particles by addition of CTAB/silica aggregates to the surface of latex microspheres. When the size and number density of the latex microspheres are changed, the size of the hollow core and the shell thickness can be controlled. However, if the microspheres are too small (50 nm in this case), agglomerated particles with many hollow voids are obtained, most likely due to colloidal instability.     

Surface plasmon spectroscopy of gold-poly-N-isopropylacrylamide core-shell particles

Highly uniform, core-shell microgels consisting of single gold nanoparticle cores and cross-linked poly-N-isopropylacrylamide (PNIPAM) shells were prepared by a novel, versatile protocol. The synthetic pathway allows control over the polymer shell thickness and its swelling behavior. The core-shell structure was investigated by electron microscopy and atomic force microscopy, whereas the swelling behavior of the shell was studied by means of dynamic light scattering and UV-vis spectroscopy. Furthermore, the latter method was used to investigate the optical properties of the hybrid particles. By modeling the scattering contribution from the PNIPAM shells, the absorption spectra of the gold nanoparticle cores could be recovered. This allows the particle concentration to be determined, and this in turn permits the calculation of the molar mass of the hybrid particles as well as the refractive index of the shells.     

Fabrication of nanocapsules with Au particles trapped inside carbon and silica nanoporous shells

Carbon capsules with hollow cores and mesoporous shells (HCMS) containing entrapped Au particles were prepared by template replication from solid core/mesoporous shell silica spheres with encapsulated Au particles. The resulting HCMS carbon capsules were then nanocast one step further to generate Au-trapping hollow core silica capsules with nanostructured shells.     

Synthesis of highly monodisperse particles composed of a magnetic core and fluorescent shell

Highly monodisperse particles composed of a magnetic silica core and fluorescent polymer shell were synthesized with a combined technique of heterocoagulation and soap-free emulsion polymerization. Prior to heterocoagulation, monodisperse, submicrometer-sized silica particles were prepared with the Stober method, and magnetic nanoparticles were prepared with a modified Massart method in which a cationic silane coupling agent of N-trimethoxysilylpropyl- N, N, N-trimethylammonium chloride was added just after coprecipitation of Fe (2+) and Fe (3+). The silica particles with negative surface potential were heterocoagulated with the magnetic nanoparticles with positive surface potential. The magnetic silica particles obtained with the heterocoagulation were treated with sodium silicate to modify their surfaces with silica. In the formation of a fluorescent polymer shell onto the silica-coated magnetic silica cores, an amphoteric initiator of 2,2'-azobis[ N-(2-carboxyethyl)-2-2-methylpropionamidine] (VA-057) was used to control the colloidal stability of the magnetic cores during the polymer coating. The polymerization of St in the presence of a hydrophobic fluorophore of pyrene could coat the cores with fluorescent polymer shells, resulting in monodisperse particles with a magnetic silica core and fluorescent polymer shell. Measurements of zeta potential for the composite particles in different pH values indicated that the composite particles had an amphoteric property originating from VA-057 initiator.     

A novel and facile preparation method of hollow silica spheres containing small SiO2 cores

This article presents a novel and facile preparation method of hollow silica spheres with loading small silica inside. In this approach, positively charged SiO₂/polystyrene core‐shell composite particles were synthesized first, when the silica shells from the sol‐gel process of tetraethoxysilane were then coated on the surfaces of composite particles via electrostatic interaction, the polystyrene was dissolved subsequently even synchronously in the same medium to form hollow silica spheres with small silica cores. TEM, SEM, and FTIR measurements were used to characterize these composite spheres. Based on this study, some inorganic or organic compounds could be loaded into these hollow silica spheres. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3431–3439, 2007     

Miniaturization of anisotropic composite particles incorporating a silica particle smaller than 100 nm

Two-step aqueous polymerizations with a water-soluble initiator of potassium persulfate were conducted to prepare anisotropic composite particles incorporating a silica core smaller than 100 nm. The two-step polymerization consisted of the first polymerization to coat the silica cores with cross-linked polymethylmethacrylate (PMMA) shell and the second polymerization to protrude a polystyrene (PSt) bulge from the core–shell particles. The concentration of ionic comonomer of sodium p-styrenesulfonate (NaSS) in the first polymerization was an important factor to stabilize the core–shell particles during the second polymerization as well as the first one, and an appropriate concentration of NaSS could prepare the anisotropic composite particles incorporating a single core. Another important factor for small, anisotropic composite particles was duration time for swelling the core–shell particles with the second monomer of styrene. Extension of the duration time from 2 to 4 h facilitated protrusion of the PSt bulge from the particles incorporating a 44-nm silica core. The composite particles were also employed to fabricate anisotropic hollow particles. Chemical etching of silica component in the composite particles with hydrofluoric acid successfully created anisotropic hollow polymer particles with a cavity size corresponding to the silica cores.     

Biphasic synthesis of Au@SiO2 core-shell particles with stepwise ligand exchange

We report the synthesis of well-dispersed core-shell Au@SiO(2) nanoparticles with minimal extraneous silica particle growth. Agglomeration was suppressed through consecutive exchange of the stabilizing ligands on the gold cores from citrate to L-arginine and finally (3-mercaptopropyl)triethoxysilane. The result was a vitreophilic, stable gold suspension that could be coated with silica in a biphasic mixture through controlled hydrolysis of tetraethoxysilane under L-arginine catalysis. Unwanted condensation of silica particles without gold cores was limited by slowing the transfer across the liquid-liquid interface and reducing the concentration of the L-arginine catalyst. In-situ dynamic light scattering and optical transmission spectroscopy revealed the growth and dispersion states during synthesis. The resulting core-shell particles were characterized via dynamic light scattering, optical spectroscopy, and electron microscopy. Their cores were typically 19 nm in diameter, with a narrow size distribution, and could be coated with a silica shell in multiple steps to yield core-shell particles with diameters up to 40 nm. The approach was sufficiently controllable to allow us to target a shell thickness by choosing appropriate precursor concentrations.     

Fabrication of sub-micrometer-sized jingle bell-shaped hollow spheres from multilayered core-shell particles

Jingle bell-shaped hollow spheres were fabricated starting from multilayered particles composed of a silica core, a polystyrene inner shell, and a titania outer shell. Composite particles of silica core-polystyrene shell, synthesized by coating a 339-nm-sized silica core with a polystyrene shell of thickness 238 nm in emulsion polymerization, were used as core particles for a succeeding titania-coating. A sol-gel method was employed to form the titania outer shell with a thickness of 37 nm. The inner polystyrene shell in the multilayered particles was removed by immersing them in tetrahydrofuran. These successive procedures could produce jingle bell-shaped hollow spheres that contained a silica core in the titania shell.     

Polymerization of electric field-centered double emulsion droplets to create polyacrylate shells

Porous and hollow particles are widely used in pharmaceuticals, as solid phases for chromatography, as catalyst supports, in bioanalytical assays and medical diagnostics, and in many other applications. By controlling size, shape, and chemistry, it is possible to tune the physical and chemical properties of the particles. In some applications of millimeter-scale hollow shells, such as in high energy density physics, controlling the shell thickness uniformity (concentricity) and roundness (sphericity) becomes particularly important. In this work, we demonstrate the feasibility of using electric field-driven droplet centering to form highly spherical and concentric polymerizable double emulsion (DE) droplets that can be subsequently photopolymerized into polymer shells. Specifically, when placed under the influence of an ～6 × 10(4) V(rms)/m field at 20 MHz, DE droplets, consisting of silicone oil as the inner droplet and tripropylene glycol diacrylate with a photoinitiator in N,N-dimethylacetamide as the outer droplet, suspended in ambient silicone oil, were found to undergo electric field-driven centering into droplets with ≥98% sphericity and ～98% concentricity. The centered DE droplets were photopolymerized in the presence of the electric field. The high degrees of sphericity and concentricity were maintained in the polymerized particles. The poly(propylene glycol diacrylate) capsules are just within the sphericity requirements needed for inertial confinement fusion experiments. They were slightly outside the concentricity requirement. These results suggest that electric field-driven centering and polymerization of double emulsions could be very useful for synthesizing hollow polymer particles for applications in high energy density physics experiments and other applications of concentric polymer shells.     

一种新型的空心镍纳米球的合成

通过以二氧化硅粒子作为模板和金纳米粒子为表面晶种的方法制备了壳厚度可控的镍空心球。采用TEM﹑XRD对二氧化硅/镍复合球和镍空心球进行了表征和研究。结果表明镍纳米壳是由似针状的面心立方的镍纳米粒子构成的，碱溶液处理过程不影响镍纳米壳的形貌。高温处理显示镍空心球具有良好的热稳定性。     

Mesopore-free hollow silica particles with controllable diameter and shell thickness via additive-free synthesis

Mesopore-free hollow silica particles with a spherical shape, smooth surface, and controllable diameter (from 80 to 300 nm) and shell thickness (from 2 to 25 nm) were successfully prepared using an additive-free synthesis method. Different from other hollow particle developments, a mesopore-free shell was produced because of the absence of additive. Although common reports pointed out the importance of the additional additive in pasting and growing silica on the surface of a template, here we preferred to exploit the effect of the template charge in gaining the silica coating process. To form the silica, basic amino acid (i.e., lysine) was used as a catalyst to replace ammonia or hydrazine, which is harmless and able to control the silica growth and produce hollow particles with smooth surfaces. Control of the particle diameter was drastically achieved by altering the size of the template. The flexibility of the process in controlling the shell thickness was predominantly attained by varying the compositions of the reactants (i.e., silica source and catalyst). The present mesopore-free hollow particles could be efficiently used for various applications, especially for thermal insulator and optical devices because of their tendency not to adsorb large molecules, as confirmed by adsorption analysis.     

A novel method for the fabrication of monodisperse hollow silica spheres

In this paper, we report a novel method for the fabrication of small monodisperse hollow silica spheres. In this approach, when silica shells were coated on polystyrene particles by the sol-gel method, the polystyrene cores were dissolved subsequently, even synchronously, in the same medium to form monodisperse hollow spheres. Neither additional dissolution nor a calcination process was needed to remove the polystyrene cores. Transmission electron microscopy, scanning electron microscopy, and porosity measurements were used to characterize the monodisperse hollow silica spheres.     

A facile method for the preparation of monodisperse hollow silica spheres with controlled shell thickness

This article presents a facile, effective, mild synthesis process for well‐defined hollow spheres by using cationic polystyrene (PS) submicro‐particles as templates. In this approach, the cationic PS templates can be first prepared via emulsifier‐free polymerization by using the cationic monomer 2‐(methacryloyloxy) ethyltrimethylammonium chloride as comonomer, then, the silica shells from the sol‐gel process of tetraethoxysilane were coated on the surfaces of template particles via electrostatic interaction, finally the PS was dissolved in situ by modification of the reaction conditions in the same medium to form monodisperse hollow silica spheres with controlled shell thickness. Fourier transform‐infrared spectroscopy, thermogravimetric analysis, Brunauer‐Emmett‐Teller, transmission electron microscopy, and scanning electron microscope measurements were used to characterize these hollow silica spheres. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1332–1338, 2010     

Deformable hollow hybrid silica/siloxane colloids by emulsion templating

A procedure to obtain hollow colloidal particles has been developed using an emulsion templating technique. Monodisperse silicone oil droplets were prepared by hydrolysis and polymerization of dimethyldiethoxysilane monomer and incorporated in a solid shell using tetraethoxysilane. Hollow shells were obtained by exchange of the core. The formation of the oil droplets was investigated using static light scattering and 29Si solution NMR, and the hollow shells were characterized by electron microscopy and static light scattering. Details on the composition of the shell material were obtained from energy-dispersive X-ray analysis and 29Si solid state NMR, revealing that the shells consist of a hybrid cross-linked network of silica and siloxane units. Confocal microscopy was used to show that the shells are permeable to small dye molecules. The thickness of the coating can be easily varied from a few nanometers upward. Depending on the ratio of shell thickness to particle radius, three types of hollow shells can be distinguished depending on the way in which they buckle upon drying. We designate them as microspheres, microcapsules, and microballoons. As a result of their monodispersity, these particles can be used for making 3D-ordered materials.     

Au和SiO2多壳结构的制备和表征

利用自组装技术和胶体还原化学, 制备出金纳米壳Au@SiO₂以及SiO₂包裹的金纳米壳SiO₂@Au@SiO₂; 去除SiO₂@Au@SiO₂颗粒中的金壳层, 获得含有可移动SiO₂核的空心壳H-SiO₂@M-SiO₂. 结果显示: SiO₂@Au@SiO₂复合颗粒表面光滑, 并保留了金壳的近红外吸收特性; 通过改变复合颗粒外层SiO₂厚度, 可以调节其等离激元共振峰的位置; 王水可以有效地去除SiO₂@Au@SiO₂中的金壳, 相应的等离激元共振峰消失.     

一种制备单分散SiO2空心微球的新方法

在乙醇/氨水介质中, 分别以分散聚合和无皂乳液聚合方法制得的不同粒径聚苯乙烯(PS)微球为模板, 以正硅酸乙酯(TEOS)为前驱体, 通过控制介质中氨水的初始体积, 一步法制得了不同粒径的单分散SiO2空心微球. 整个过程无需添加其它溶剂溶解或高温煅烧的方法来除去模板微球. 对SiO2空心微球进行测试表征, 提出了SiO2空心微球的可能形成机制.     

Construction of Chiroptical Switch on Silica Nanoparticle Surface via Chiral Self-assembly of Side-chain Azobenzene-containing Polymer

In this contribution,we utilized surface-initiated atom transfer radical polymerization (SI-ATRP) to prepare organic-inorganic hybrid core/shell silica nanoparticles (NPs),where silica particles acted as cores and polymeric shells (PAzoMA*) were attached to silica particles via covalent bond.Subsequently,chiroptical switch was successfully constructed on silica NPs surface taking advantage of supramolecular chiral self-assembly of the grafted side-chain Azo-containing polymer (PAzoMA*).We found that the supramolecular chirality was highly dependent on the molecular weight of grafted PAzoMA*.Meanwhile,the supramolecular chirality could be regulated using 365 nm UV light irradiation and heating-cooling treatment,and a reversible supramolecular chiroptical switch could be repeated for over five cycles on silica NPs surface.Moreover,when heated above the glass transition temperature (Tg) of PAzoMA*,the organic-inorganic hybrid nanoparticles (SiO2@PAzoMA*NPs) still exhibited intense DRCD signals.Interestingly,the supramolecular chirality could be retained in solid film for more than 3 months.To conclude,we have prepared an organic-inorganic hybrid core/shell chiral silica nanomaterial with dynamic reversible chirality,thermal stability and chiral storage functions,providing potential applications in dynamic asymmetric catalysis,chiral separation and so on.     

Elaboration of monodisperse spherical hollow particles with ordered mesoporous silica shells via dual latex/surfactant templating: radial orientation of mesopore channels

Monodisperse spherical hollow nanoparticles of mesoporous silica featuring mesopores with a radial orientation in the silica shell were synthesized via a dual-templating method. Specifically designed polystyrene latexes with anionic or cationic surface charges acted as the core templates, while cetyltrimethylammonium bromide served as a co-template to structure the mesopore formation during tetraethoxysilane hydrolysis/condensation. The particles were well-separated and presented homogeneous mesoporous silica shells. Average particle diameters were less than 200 nm, and the particles displayed high values of specific surface area and pore volume. The shell thickness and the hollow core diameter could be tuned independently while the radial pore structure was preserved. A detailed analysis of the nitrogen adsorption-desorption isotherms proved that the central cavity was completely isolated from the external medium, that is, only accessible through the radial mesopores of the shell. Consequently, our particles gather the advantages of a well-defined structure, straight penetrating channels across the silica shell, and a high accessible porous volume of the central core. These properties make them far better candidates than simple mesoporous particles for any storage and/or controlled release applications.     

Fabrication of hollow spheres and thin films of nickel hydroxide and nickel oxide with hierarchical structures

Hollow spheres and thin films of Ni(OH)(2) and NiO with unusual form and hierarchical structures have been synthesized by a simple solution chemistry method. First, in situ formed Ni(OH)(2) nanoflakelets organized on the surface of styrene-acrylic acid copolymer (PSA) latex particles to form core/shell structures. Ni(OH)(2) hollow shells built up with nanoflakelets were obtained after subsequent removal of the core latex particles by dissolving PSA latex in toluene; the removal of the cores by calcinations would result in NiO hollow shells, also with hierarchical structures. BET calculation showed the surface area of the NiO hollow spheres was 156 m(2)/g. The nanoflakelets could also organize themselves into thin films with hierarchical structures. It is anticipated that these novel structures will have some unique applications in Ni-based batteries and other potentials.