Facile Fabrication of Bio- and Dual-Functional Poly(2-oxazoline) Bottle-Brush Brush Surfaces

Poly(2-oxazoline)s (POx) bottle-brush brushes have excellent biocompatible and lubricious properties, which are promising for the functionalization of surfaces for biomedical devices. Herein, a facile synthesis of POx is reported which is based bottle-brush brushes (BBBs) on solid substrates. Initially, backbone brushes of poly(2-isopropenyl-2-oxazoline) (PIPOx) were fabricated via surface initiated Cu⁰ plate-mediated controlled radical polymerization (SI-Cu⁰CRP). Poly(2-methyl-2-oxazoline) (PMeOx) side chains were subsequently grafted from the PIPOx backbone via living cationic ring opening polymerization (LCROP), which result in ≈100 % increase in brush thickness (from 58 to 110 nm). The resultant BBBs shows tunable thickness up to 300 nm and high grafting density (σ) with 0.42 chains nm⁻². The synthetic procedure of POx BBBs can be further simplified by using SI-Cu⁰CRP with POx molecular brush as macromonomer (M_n=536 g mol⁻¹, PDI=1.10), which results in BBBs surface up to 60 nm with well-defined molecular structure. Both procedures are significantly superior to the state-of-art approaches for the synthesis of POx BBBs, which are promising to design bio-functional surfaces.     

Friction between brush layers of charged and neutral bottle-brush macromolecules. molecular dynamics simulations

Using molecular dynamics simulations, we study the lubricating properties of neutral and charged bottle-brush coatings as a function of the compression and shear stresses and brush grafting density. Our simulations have shown that in charged bottle-brush systems under shear there is a layer with excess counterions located in the middle between brush-bearing surfaces. The main deformation mode of the charged bottle-brush layers is associated with the backbone deformation, resulting in the backbone deformation ratio, α, and shear viscosity, η, being universal functions of the Weissenberg number. In the case of neutral bottle-brush systems, in addition to the backbone deformation there is also side chain deformation. The coupling between backbone and side chain deformation violates universality in the deformation ratio, α, dependence on the Weissenberg number and results in scaling exponents varying with the compression stress and brush grafting density. The existence of different length scales controlling deformation of neutral bottle brushes manifests itself in the shear viscosity, η, dependence on the shear rate, ?γ. Shear viscosity, η, as a function of the shear rate, ?γ, has two plateaus and two shear thinning regimes. The low shear rate plateau and shear thinning regime correspond to the backbone deformation, while the second plateau and shear thinning regime at moderate shear rates are due to side chain deformation. For both systems the value of the friction coefficient increases with increasing shear rate. The values of the friction coefficient for charged bottle-brush systems are about ten times smaller than corresponding values for neutral systems at the same shear rate.     

Simulation of Copolymer Bottle-Brushes

Summary: The structure of bottle-brush polymers with a rigid backbone and flexible side chains is studied in three dimensions, varying the grafting density, the side chain length, and the solvent quality. Some preliminary results of theoretical scaling considerations for one-component bottle-brush polymers in a good solvent are compared with Monte Carlo simulations of a simple lattice model. For the simulations a variant of the pruned-enriched Rosenbluth method (PERM) allowing for simultaneous growth of all side chains in the Monte Carlo sampling is employed. For a symmetrical binary (A,B) bottle-brush polymer, where two types (A,B) of flexible side chains are grafted with one chain end to the backbone in an alternating way, varying repulsive binary interactions between unlike monomers and the solvent quality, it is found that phase separation into an A-rich part of the cylindrical molecule and a B-rich part can occur only locally. Long range order (in the direction of the backbone) does not occur, and hence the transition from the randomly mixed state of the bottle-brush to the phase-separated structure is strongly rounded, in contrast to the corresponding mean field predictions of a sharp transition to a “Janus cylinder” phase-separated structure. This lack of a phase transition can be understood from an analogy with spin models in one dimension. By estimating the correlation length for this phase separation along the backbone as a function of side chain length and solvent quality, we present strong evidence that no sharp phase transition occurs.     

Extended conformations of isolated molecular bottle-brushes: Influence of side-chain topology

A Monte Carlo study is presented to discuss the influence of the side-chain topology on the enhancement of the persistence length of a molecular bottle-brush in a dilute athermal solution due to the excluded volume interactions between the side chains. The structures investigated consisted of freely jointed backbones of 100 hard spheres (beads) of diameter 1 to which 50 equally flexible side chains were grafted. The diameter of the side-chain beads was varied from 1 to 3 in the same units. For every given size of the side-chain bead, the length of the side chains was varied from 4 to 20 beads. The ratio between the persistence length and the bottle-brush diameter, which is the determining factor for lyotropic behavior of conventional semi-flexible chains, was found to be almost independent of the side-chain length. At the same time, it was found to increase considerably with increasing size of the side-chain beads, suggesting that by a proper choice of the chemistry lyotropic behavior of molecular bottle-brushes due to excluded-volume interactions between the side chains might be achieved. Moreover, relatively short side chains can be used since the side chain length has only a minor influence on the ratio between the persistence length and the diameter. These findings are in a good agreement with recent experimental observations.     

两亲性杂侧链聚合物刷的合成及其乳化功能

报道了一种随机高密度接枝亲水、疏水聚合物侧链的刷形两亲性聚合物.首先,结合可逆加成-断裂链转移(RAFT)聚合和后修饰方法,得到含叠氮侧基的聚甲基丙烯酸缩水甘油酯(PGMA-N3)作为主链;再分别合成端炔基聚苯乙烯(PS)和端炔基聚环氧乙烷(PEO),然后通过铜催化的叠氮-炔环加成反应,将疏水性PS和亲水性PEO同时高效的接到PGMA主链上,制得两亲性杂侧链的聚合物刷.由凝胶渗透色谱(SEC)分析得知,在主链叠氮基团与两侧链总炔基的摩尔投料比为1∶1的条件下,PS和PEO的接枝效率很高,都大于90%.通过调节主链长度和2种侧链的投料比,获得不同组成的聚合物刷.通过等质量的甲苯/水混合体系,考察两亲性聚合物刷的乳化能力,发现主链聚合度为100,PS∶PEO比例为70∶30的聚合物刷表现出最佳的乳化性能.     

Synthesis of molecular brushes by "grafting onto" method: combination of ATRP and click reactions

Molecular brushes (densely grafted polymers or bottle-brush macromolecules) were synthesized by the "grafting onto" method via combination of atom transfer radical polymerization (ATRP) and "click" reactions. Linear poly(2-hydroxyethyl methacrylate) (PHEMA) polymers were synthesized first by ATRP. After esterification reactions between pentynoic acid and the hydroxyl side groups, polymeric backbones with alkynyl side groups on essentially every monomer unit (PHEMA-alkyne) were obtained. Five kinds of azido-terminated polymeric side chains (SCs) with different chemical compositions and molecular weights were used, including poly(ethylene glycol)-N3 (PEO-N3), polystyrene-N3, poly(n-butyl acrylate)-N3, and poly(n-butyl acrylate)-b-polystyrene-N3. All click coupling reactions between alkyne-containing polymeric backbones (PHEMA-alkyne) and azido-terminated polymeric SCs were completed within 3 h. The grafting density of the obtained molecular brushes was affected by several factors, including the molecular weights and the chemical structures of the linear SCs, as well as the initial molar ratio of linear chains to alkynyl groups. When linear polymers with "thinner" structure and lower molecular weight, e.g., PEO-N3 with Mn = 775 g/mol, were reacted with PHEMA-alkyne (degree of polymerization = 210) at a high molar ratio of linear chains to alkynyl groups in the backbone, the brush copolymers with the highest grafting density were obtained (Y(grafting) = 88%). This result indicates that the average number of SCs was ca. 186 per brush molecule and the average molecular weight of the brush molecules was ca. 190 kg/mol.     

Adsorption characteristics of bottle-brush polymers on silica: effect of side chain and charge density

The adsorption behavior of bottle-brush polymers with different charge/PEO ratio on silica was studied using optical reflectometry and QCM-D. The results obtained under different solution conditions clearly demonstrate the existence of two distinct adsorption mechanisms depending on the ratio of charge/PEO. In the case of low-charge density brush polymers (0-10 mol %), the adsorption occurs predominantly through the PEO side chains. However, the presence of a small amount of charge along the backbone (as low as 2 mol %) increases the adsorption significantly above that of the uncharged bottle-brush polymer in pure water. As the charge density of the brush polymers is increased to 25 mol % or larger the adsorption occurs predominantly through electrostatic interactions. The adsorbed layer structure was studied by measuring the layer dissipation using QCM-D. The adsorbed layer formed by the uncharged brush polymer dissipates only a small amount of energy that indicates that the brush lie along the surface, the scenario in which the maximum number of PEO side chains interact with the surface. The adsorbed layers formed by the low-charge density brush polymers (2-10 mol %) in water are more extended, which results in large energy dissipation, whereas those formed by the high-charge density brush polymers (50-100 mol %) have their backbone relatively flat on the surface and the energy dissipation is again low.     

Conformational studies of bottle-brush polymers absorbed on a flat solid surface

The adsorption of a bottle-brush polymer end-grafted with one chain end of its backbone to a flat substrate surface is studied by Monte Carlo simulation of a coarse-grained model, that previously has been characterized in the bulk, assuming a dilute solution under good solvent conditions. Applying the bond fluctuation model on the simple cubic lattice, we vary the backbone chain length N(b) from N(b)=67 to N(b)=259 effective monomeric units, the side chain length N from N=6 to N=48, and set the grafting density to σ=1, i.e., parameters that correspond well to the experimentally accessible range. When the adsorption energy strength ? is varied, we find that the adsorption transition (which becomes well-defined in the limit N(b)→∞, for arbitrary finite N) roughly occurs at the same value ?(c) as for ordinary linear chains (N=0), at least within our statistical errors. Mean square end-to-end distances and gyration radii of the side chains are obtained, as well as the monomer density profile in the direction perpendicular to the adsorbing surface. We show that for longer side chains the adsorption of bottle-brushes is a two-step process, the decrease of the perpendicular linear dimension of side chains with adsorption energy strength can even be nonmonotonic. Also, the behavior of the static structure factor S(q) is analyzed, evidence for a quasi-two-dimensional scaling is presented, and consequences for the interpretation of experiments are discussed.     

Molecular dynamics simulations of grafted layers of bottle-brush polyelectrolytes

Using molecular dynamics simulations, we study the effect of the brush grafting density and degree of polymerization of the side chains on conformations of brush layers made of charged bottle-brush macromolecules. The thickness of the brush layer first decreases with increasing brush grafting density; then, it saturates and remains constant in the wide interval of the brush grafting densities. The brush layers consisting of the bottle-brush macromolecules with longer side chains have a larger layer thickness. The elongation of the side chains of the bottle-brush macromolecules decreases with increasing brush grafting density. This contraction of the side chains is due to counterion condensation inside the volume occupied by bottle-brushes. Our simulations showed that counterion condensation is a multiscale process reflecting different symmetries of the bottle-brush layer.     

Manifestation of side-chain interactions in solution properties of “loose” PI-graft-PMMA molecular brushes

The molecular properties of polymer brushes composed of polyimide with polymerization degree 50 and loosely grafted poly(methyl methacrylate) chains of variable length (PI-graft-PMMA) were studied by viscometry, dynamic light scattering, and equilibrium electro-optical Kerr effect methods in a diluted solution. It was established that the intrinsic viscosity and hydrodynamic dimension of PI-graft-PMMA copolymers increase when the electro-optical Kerr constant decreases with the elongation of PMMA side chains in the range of 40–110 monomer units. The observed difference in the solution properties of the copolymers was explained by their side-chain interactions in spite of a large distance between the neighboring grafting points typical of “loose brushes.” A strong effect of the chain rigidity and dipole structure on solution properties of the studied samples was demonstrated. The Kuhn segment lengths for PI-graft-PMMA copolymers were estimated to vary in the range 3.8–12.1?nm.     

一种以聚酰亚胺为主链的分子刷合成及表征

以自制的侧基含溴的聚酰亚胺为大分子引发剂,2,2'-联吡啶/氯化亚铜为催化体系,通过原子转移自由基聚合(ATRP)反应,引发甲基丙烯酸三氟乙酯(TFEMA)和甲基丙烯酸2-(三甲基硅氧基)乙酯(HEMA-tms)共聚,制备了以聚酰亚胺为主链的分子刷,聚酰亚胺-接枝-聚(甲基丙烯酸三氟乙酯-共-甲基丙烯酸2-(三甲基硅氧基)乙酯),(PI-g-P(TFEMA-co-HEMA-tms)).对其中甲基丙烯酸2-(三甲基硅氧基)乙酯进行水解得到侧链含羟基的聚酰亚胺分子刷(PI-g-P(TFEMA-co-HEMA)),最后通过羟基与氯磷酸二乙酯反应,得到含亚磷酸酯基团的聚酰亚胺分子刷(PI-g-P(TFEMA-co-HEMA-P)).利用核磁共振氢谱(1H-NMR)、红外等方法,表征了所合成分子刷的结构.利用示差扫描量热法(DSC)、热失重分析(TGA)研究了聚合物分子刷的热性能.根据TGA计算出的分子刷组成与1H-NMR计算结果能较好的吻合.     

Computer simulation of bottle-brush polymers with flexible backbone: good solvent versus theta solvent conditions

By molecular dynamics simulation of a coarse-grained bead-spring-type model for a cylindrical molecular brush with a backbone chain of N(b) effective monomers to which with grafting density σ side chains with N effective monomers are tethered, several characteristic length scales are studied for variable solvent quality. Side chain lengths are in the range 5 ≤ N ≤ 40, backbone chain lengths are in the range 50 ≤ N(b) ≤ 200, and we perform a comparison to results for the bond fluctuation model on the simple cubic lattice (for which much longer chains are accessible, N(b) ≤ 1027, and which corresponds to an athermal, very good, solvent). We obtain linear dimensions of the side chains and the backbone chain and discuss their N-dependence in terms of power laws and the associated effective exponents. We show that even at the theta point the side chains are considerably stretched, their linear dimension depending on the solvent quality only weakly. Effective persistence lengths are extracted both from the orientational correlations and from the backbone end-to-end distance; it is shown that different measures of the persistence length (which would all agree for Gaussian chains) are not mutually consistent with each other and depend distinctly both on N(b) and the solvent quality. A brief discussion of pertinent experiments is given.     

Influence of Rigid Side Chain Attraction on Stiffness and Conformations of Comb Copolymer Brushes Strongly Adsorbed on a Flat Surface

The influence of side‐chain attraction on the conformational properties of two‐dimensional polymer brushes with rigid side chains is investigated using Monte Carlo simulations. Using a rigid backbone, a characteristic interaction strength is determined by investigating the critical interaction energy for the collapse of the side chains onto the backbone. For a flexible backbone, the persistence length of the backbone is found to decrease with increasing attraction, irrespective of whether side‐chain flipping is allowed or not. This result is in good agreement with the theoretical modeling presented before. If side‐chain flipping is allowed, the attraction between the side chains leads to aggregation of successive side chains at one side of the backbone resulting in a characteristic local spiraling of the backbone.     

Molecular brushes with long polyfluorene backbones and polymethacrylic acid side chains: Luminescent properties and self-organization in solutions

A series of molecular brushes with a polyfluorene (PF) backbone and polymethacrylic acid side chains of varying lengths were prepared by atom transfer radical polymerization. The structure and composition of the synthesized compounds were confirmed by ¹H NMR and IR spectroscopy. Effect of the length of the backbone on spectral and conformational parameters of the macromolecules in solutions was analyzed. The grafting density of side chains was about 90%. Spectral methods have been used to determine the dependence of side chain grafting on the luminescent properties of polymer solutions, including quantum yields. It was shown that an optimal length of polymethacrylic acid side chains provides solubility of the polymer brushes. Solutions of PF-graft-polymethacrylic acid complexes with the model substance curcumin were investigated. It was established that the molecular brushes containing curcumin form monomolecular micelles. Molecular brushes with zinc phthalocyanine, potential systems for photodynamic, and photothermal therapy, were studied.     

Surface properties of bottle-brush polyelectrolytes on mica: effects of side chain and charge densities

Surface properties of a series of cationic bottle-brush polyelectrolytes with 45-unit-long poly(ethylene oxide) side chains were investigated by phase modulated ellipsometry and surface force measurements. The evaluation of the adsorbed mass of polymer on mica by means of ellipsometry is complex due to the transparency of mica and its birefringence and low dielectric constant. We therefore employed a new method to overcome these difficulties. The charge and the poly(ethylene oxide) side chain density of the bottle-brush polymers were varied from zero charge density and one side chain per segment to one charge per segment and no side chains, thus spanning the realm from a neutral bottle-brush polymer, via a partly charged brush polyelectrolyte, to a linear fully charged polyelectrolyte. The adsorption properties depend crucially on the polymer architecture. A minimum charge density of the polymer is required to facilitate adsorption to the oppositely charged surface. The maximum adsorbed amount and the maximum side chain density at the surface are obtained for the polymer with 50% charged segments and the remaining 50% of the segments carrying poly(ethylene oxide) side chains. It is found that brushlike layers are formed when 25-50% of the segments carry poly(ethylene oxide) side chains. In this paper, we argue that the repulsion between the side chains results in an adsorbed layer that is non-homogeneous on the molecular level. As a result, not all side chains will contribute equally to the steric repulsion but some will be stretched along the surface rather than perpendicular to it. By comparison with linear polyelectrolytes, it will be shown that the presence of the side chains counteracts adsorption. This is due to the entropic penalty of confining the side chains to the surface region.     

Comb copolymer cylindrical brushes containing semiflexible side chains: a Monte Carlo study

The off‐lattice Monte Carlo method is applied to investigate the equilibrium conformations of isolated comb copolymer cylindrical brushes in an athermal solution. The molecules considered consist of a flexible backbone, which is densely grafted with semiflexible side chains. The study focuses on the influence of the degree of intrinsic stiffness, λ_side, of the side chains on the conformational behavior of the molecules. It is demonstrated that with a fixed side chain length, M, the local length scale conformational fluctuations of the backbone increase as a function of λ_side. However, the persistence length, λ, of the cylindrical brush increases considerably with the side chain stiffness, indicating that the backbone becomes more extended at the large length scale. Moreover, as a function of λ_side, there is an increase in the ratio λ/D of the persistence length and the diameter, D, of the brush. This behavior is in good agreement with recent theoretical predictions and provides important new insight in the latest experimental observations.     

Microbial adhesion to poly(ethylene oxide) brushes: influence of polymer chain length and temperature

Glass surfaces were modified by end-grafting poly(ethylene oxide) (PEO) chains having molecular weights of 526, 2000, or 9800 Da. Characterization using water contact angles, ellipsometry, and X-ray photoelectron spectroscopy confirmed the presence of the PEO brushes on the surface with estimated lengths in water of 2.8-, 7.5-, and 23.7-nm, respectively. Adhesion of two bacterial (Staphylococcus epidermidis and Pseudomonas aeruginosa) and two yeast (Candida albicans and Candida tropicalis) strains to these brushes was studied and compared to their adhesion to bare glass. For the bacterium P. aeruginosa and the yeast C. tropicalis, adhesion to the 2.8-nm brush was comparable to their adhesion on bare glass, whereas adhesion to the 7.5- and 23.7-nm brushes was greatly reduced. For S. epidermidis, adhesion was only slightly higher to the 2.8-nm brush than that to the longer brushes. Adhesion of the yeast C. albicans to the PEO brushes was lower than that to glass, but no differences in adhesion were found between the three brush lengths. After passage of an air bubble, nearly all microorganisms adhering to a brush were removed, irrespective of brush length, whereas retention of the adhering organisms on glass was much higher. No significant differences were found in adhesion nor retention between experiments conducted at 20 and those conducted at 37 degrees C.     

Conformations of molecular brushes based on polyimide and poly(methyl methacrylate) in selective solvents: Experiment and computer simulation

The effect of solvent quality with respect to main and side chains on the conformations of molecular brushes is investigated by the methods of molecular hydrodynamics and optics as well as by computer simulation. Copolymers with a polyimide backbone and poly(methyl methacrylate) side chains are studied in solvents featuring strongly different thermodynamic qualities (chloroform, ethyl acetate, and 3-heptanone). The studied samples have close total molecular masses and backbone lengths but differ in grafting densities and lengths of side chains: a brush with densely grafted and relatively short side chains versus a brush with loosely grafted but very long side chains. For both types of brushes, similar changes in hydrodynamic behavior with improvement in the solvent quality are found experimentally. Computer simulation shows that these changes have different origins. In the former case, macromolecules are elongated, and their volumes grow simultaneously, while in the latter case, the shape of the macromolecules remains close to spherical and the changes in hydrodynamic parameters are mainly due to an increase in the volume of macromolecules.     

Molecular polyimide brushes as a novel membrane material for pervaporation processes

Samples of molecular polyimide brushes with poly(methyl methacrylate) side chains with substantially different grafting densities and lengths of side chains are obtained by the atom-transfer radical polymerization of methyl methacrylate using samples of polyimide multicenter macroinitiators with different contents of initiation groups. Strong homogeneous films suitable for use as diffusion membranes for pervaporation separations of liquid mixtures are cast from solutions of polyimide brushes in dimethylformamide. Investigations are performed for films of polyimide brushes with loosely grafted short side chains or densely grafted long side chains as well as for films of a polyimide identical in its chemical structure to the backbone of polyimide brushes. It is shown that all film membranes sorb water moderately and do not sorb isopropanol. For membranes made of the polyimide and the loosely grafted brush, which is close to the polyimide in its properties, the active sorption of acetonitrile is demonstrated. It is found that all membranes exhibit high selectivities for water upon pervaporation of water–isopropanol mixtures. In addition, membranes made of the brush with densely grafted side chains show high productivity.     

Inhibitory effect of hydrophilic polymer brushes on surface-induced platelet activation and adhesion

Poly(N,N-dimethylacrylamide) (PDMA) brushes are successfully grown from unplasticized poly(vinyl chloride) (uPVC) by well-controlled surface-initiated atom transfer radical polymerization (SI-ATRP). Molecular weights of the grafted PDMA brushes vary from ≈ 35,000 to 2,170000 Da, while the graft density ranges from 0.08 to 1.13 chains · nm(-2). The polydispersity of the grafted PDMA brushes is controlled within 1.20 to 1.80. Platelet activation (expression of CD62) and adhesion studies reveal that the graft densities of the PDMA brushes play an important role in controlling interfacial properties. PDMA brushes with graft densities between 0.35 and 0.50 chains · nm(-2) induce a significantly reduced platelet activation compared to unmodified uPVC. Moreover, the surface adhesion of platelets on uPVC is significantly reduced by the densely grafted PDMA brushes. PDMA brushes that have high molecular weights lead to a relatively lower platelet activation compared to low-molecular-weight brushes. However, the graft density of the brush is more important than molecular weight in controlling platelet interactions with PVC. PDMA brushes do not produce any significant platelet consumption in platelet rich plasma. Up to a seven-fold decrease in the number of platelets adhered on high graft density brushes is observed compared to the bare PVC surface. Unlike the bare PVC, platelets do not form pseudopodes or change morphology on PDMA brush-coated surfaces.