Effect of solvent type on polycondensation of TEOS catalyzed by DBTL as used for stone consolidation

We have investigated the effect of solvent in the sol–gel process of tetraethylorthosilicate (TEOS) when di-n-butyltin dilaurate (DBTL) is used as polycondensation catalyst. Two sets of materials similar to those employed in the field of stone consolidation were prepared in the laboratory by using either protic or aprotic solvents: (1) xerogels from TEOS/DBTL, and (2) composites from TEOS/colloidal silica particles/DBTL. The results have shown that the solvent directly influences the aggregation pathway of the condensates. For a mixture of methyl ethyl ketone/acetone (aprotic solvents), gels with a higher degree of condensation were obtained. In the case of TEOS xerogels, the materials are essentially non-porous. Additionally, the incorporation of colloidal silica particles induces an important increase in porosity, which is even more dramatic when ethanol is used as solvent, through the formation of micro and mesoporous materials as the concentration of particles is increased. A TEOS polymerization pathway is suggested depending on which system of solvents is used. Various analytical techniques were used to characterize the materials obtained.     

Utilization of natural anthocyanin pigments as photosensitizers for dye-sensitized solar cells

Inorganic–organic hybrid crack-free xerogels were obtained by using a surfactant n-octylamine as a catalyst containing tetraethoxyorthosilicate (TEOS) and hydroxyl-terminated polydimethylsiloxane as an additive. We studied the effect of gelling time and viscosity on PDMS–OH concentration. We have demonstrated that the addition of poly(dimethylsiloxane) (PDMS) to a silica oligomer associated with a neutral catalyst, in the presence of a surfactant, accelerated the gelling process; this reduction of the time needed for the product to gel in carbonate stones helped to achieve effective stone protection. It was found that PDMS–OH was chemically incorporated into the gel matrix via Si–O–Si bonds by FTIR analysis and an appreciable reduction of gel fracture for hybrids prepared from 3 % w/w of PDMS. Nitrogen adsorption–desorption isotherms of xerogels were measured, it showed the pore size of xerogels decrease with the addition of PDMS when concentration of PDMS was below 6 %, while xerogels showed pores in the macroporous range when adding 12 % w/w of PDMS. The protective performance evaluated by its ability to resist acid rain reveals that the protective effects were satisfying.     

TEOS/HDTMS inorganic–organic hybrid compound used for stone protection

Inorganic–organic hybrid crack-free xerogels were obtained by using a surfactant n-octylamine as a catalyst containing tetraethoxyorthosilicate (TEOS) and hexadecyltrimethoxysilane as an additive. We studied the effect of gelling time and sol pH on n-octylamine concentration. The organic modification was confirmed by infrared spectroscopic studies, and the hydrophobicity of the coating was tested by the contact angle measurements. The stone surface morphology of sample treated with hybrid sol was characterized. The results show the hybrid gel network exhibits a larger pore size than the gel containing exclusively the silica from TEOS. After the limestone’s surface was modified by hybrid sol, the contact angle of limestone increased from 58° to 123°. The protective performance evaluated by its ability to resist acid rain reveals that the protective effects are satisfied.     

Viscoelastic characterization of TEOS sols in three different solvents when DBTL is used as polycondensation catalyst

The gelation process of TEOS sols in three different solvents using di-n-butyltin dilaurate (DBTL) as polycondensation catalyst has been investigated. Sol compositions were similar to those employed in the field of stone consolidation for the conservation of historical buildings. Three different systems were studied: TEOS in ethanol (S-EtOH) which was tested to explain gelation in protic solvents; TEOS in a mixture of methylethylketone/acetone (S-MA) to represent aprotic solvents; and TEOS in a blend of MEK/ethanol (S-ME) for comparison of a system with properties intermediate between protic and aprotic solvents. The gelation process was studied by measuring the viscoelastic behavior near the gelation point (GP). A scaling exponent (Δ) was determined for the elastic modulus, G(ω)′ and the viscous modulus, G′′(ω), which both follow the same power law, ω^Δ, at GP. The fractal dimension, df, was calculated from the scaling exponent, Δ, for each TEOS-DBTL system. For each type of solvent studied, values of Δ from 0.34 to 0.53 with df of 1.9–2.2 were obtained. The results suggest that DBTL leads to a TEOS polycondensation mechanism similar to that observed for a base-catalyst system. However, the change in df suggests that there is a significant effect of the solvent on aggregation mechanisms of the gelation process. A diffusion limited cluster–cluster aggregation mechanism (DLCCA) was observed when ethanol was used as protic solvent, while a reaction limited cluster–cluster aggregation mechanism (RLCCA) was observed for MEK/acetone (aprotic solvent).     

A biofriendly sol–gel route to new hybrid gels for enzyme encapsulation

New hybrid gels were prepared from the gelation of glycol-modified tetraethoxysilane (TEOS) in the presence of O-2-hydroxy-3-(trimethylammonio)propyl guar gum (HTPG), and were then used for the in situ encapsulation of papain. Different from the sol–gel process based on commonly used TEOS, the biofriendly sol–gel process developed in this study could be conducted rapidly at ambient temperature without the addition of any organic solvent or acidic catalyst. In particular, the mechanical strength and microstructure of resultant hybrid gel matrix could be modulated by HTPG amount. In comparison with free papain, the encapsulated papain is characteristic of improved enzymatic activity, thermal and storage stability as well as good reusability.     

Internal Polarity of Class I and Class II Type Sol–Gel Hybrid Materials Using Aromatic Aminoketones as Solvatochromic Probes for Adsorbed Solvents and the Silicatic Cage

2-Hydroxyethylamino functionalized aromatic amino ketones bearing furyl and thienyl as well as 4-N, N-dimethylaminophenyl moieties have been used as solvatochromic probes when entrapped physically (Class I) and chemically bonded (Class II), respectively, to silicatic sol–gel hybrid materials. Class I hybrid materials have been obtained by encapsulation the dissolved probe during the acidically induced sol–gel procedure using various amounts of methyltrimethoxysilane and tetramethoxysilane as components. Class II xerogels have been synthesized by functionalization of the 2-hydroxyethylamino substituted aryl ketones with 3-isocyanatopropyltriethoxysilane and subsequent sol–gel process with TEOS (tetraethoxysilane). Molecular structures of the hybrid materials have been confirmed by solid-state MAS CP -²⁹Si and -¹³C NMR spectroscopy.Significant influences of the polarity of adsorbed solvents and of composition of the sol–gel material on the UV/Vis absorption spectrum of the encapsulated solvatochromic moiety are observed.Mobility of the entrapped probe and the associated influence of the adsorbed solvent upon the probe in the pores are significantly different for the two different classes of sol–gel materials studied.Solvatochromism of Class I xerogels shows that opposite effects of primary alcohols as function of alkyl chain length on the interfacial polarity are observed. They are caused by the influence of the internal surface modified with the solvent and origin solvent polarity on the UV/Vis spectrum of the encapsulated probe. Class II xerogels show related effects as observed for the probes studied in well behaved regular solvents.     

Investigation of polar organic solvents compatible with Corona Charged Aerosol Detection and their use for the determination of sugars by hydrophilic interaction liquid chromatography

A range of organic solvents (ethanol, isopropanol and acetone) has been investigated as alternatives to acetonitrile and methanol when used in conjunction with Corona Charged Aerosol Detection (Corona CAD). These solvents have been evaluated with regard to their effect on the response of the Corona CAD. Three dimensional response surfaces were constructed using raw data showing the relationship between detector response, analyte concentration and percentage of organic solvent in the mobile phase, using sucralose or quinine as the test analyte. The detector response was non-linear in terms of analyte concentration for all solvents tested. However, detector response varied in an approximately linear manner with percentage of organic solvent over the range 0–40% for ethanol or isopropanol and 0–80% for acetone and methanol. The chromatographic performance of the various solvents when used as aqueous–organic mobile phases was evaluated for isocratic and gradient separations of sugars and sugar alcohols by hydrophilic interaction liquid chromatography (HILIC) using an Asahipak NH2P-504E column coupled with Corona CAD detection. It was found that whilst acetonitrile provided the highest column efficiencies and lowest detection limits of the solvents studied, acetone also performed well and could be used to resolve the same number of analytes as was possible with acetonitrile. Typical efficiencies and detection limits of 5330 plates m⁻¹ and 1.25 μg mL⁻¹, respectively, were achieved when acetone was used as the organic modifier. Acetone was utilised successfully as an organic modifier in the HILIC separation of carbohydrates in a beer sample and also for a partially digested dextran sample.     

Conversion of bio-oxygenates into hydrocarbons in the presence of a commercial Pt–Re/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst

It was found that the preliminarily reduced commercial platinum–rhenium catalyst PR-71 exhibited high activity in the conversion of ethanol into C₄–C₁₂ olefins and in the cross-condensation reactions of ethanol with glycerol, acetone, n-propanol, and isopropanol. Acetone and glycerol exhibited the highest reactivity in the cross-condensation reactions; this manifested itself in an increase in the total yield of the target fraction of C₄–C₁₂ hydrocarbons and in a more than 10-fold increase in the yield of products containing the odd numbers of carbon atoms, as compared with the conversion of individual ethanol. The structural studies performed by extended X-ray absorption fine structure (EXAFS) spectroscopy and transmission electron microscopy showed that the high selectivity of PR-71 can be caused by the formation of bimetallic Pt–Re and Pt–Al clusters in the course of the prolonged preliminary reduction of the catalyst.     

Mechanism of olefin epoxidation in the presence of a titanium-containing zeolite

The effect of the nature of a solvent on the liquid-phase epoxidation of olefins with an aqueous solution of hydrogen peroxide over a titanium-containing zeolite is studied. Butanol-1, butanol-2, propanol-1, isopropanol, methanol, ethanol, water, acetone, methyl ethyl ketone, isobutanol, and tert-butanol are examined as solvents. A mechanism of olefin epoxidation with hydrogen peroxide in an alcohol medium over a titanium-containing zeolite is proposed. Epoxidation reactions involving hydrogen peroxide and different olefins are studied experimentally.     

Extraction of aroma compounds in blackcurrant buds by alternative solvents: Theoretical and experimental solubility study

This study was designed to evaluate the performance of nine alternative solvents (α-pinene, MeTHF, ethyl acetate, methyl acetate, ethyl lactate, butanol, isopropanol, ethanol and CO₂ supercritical fluid) for extracting aromas from blackcurrant buds (Ribes nigrum L) compared to that of n-hexane, commonly used. This study has been performed via experimentation and simulation using Hansen solubility methodology for the comprehension of the dissolving mechanism. Experimentally, the extracts were analysed to compare the solvents performance in terms of aroma compositions. The results indicated that an alternative solvent, i.e. MeTHF, could be the most promising one for n-hexane substitution with good yield and selectivity of aromas.     

Synthesis and characterization of silica xerogels obtained via fast sol–gel process

The synthesis and physical properties of high surface area silica xerogels obtained by a two-step sol–gel process in the absence of supercritical conditions are reported. The hydrolysis and condensation reactions were followed by infrared spectroscopy. The increment in the bands corresponding to silanol and hydroxyl groups suggests that the hydrolysis reaction was complete during the first 30 min. The effect on surface area and global reaction time under various reaction conditions, such as type of alkaline catalyst and solvents, water–monomer and solvent–monomer molar ratios, was also studied. The obtained results suggest that surface area was increased using 3-aminopropyltriethoxysilane as catalyst. The use of isopropyl alcohol as solvent promotes the reduction of the capillary stress, giving a well-structured xerogel. As a conclusion, with H₂O/i-PrOH/TEOS in a molar ratio of 10:4:1, it was possible to obtain silica xerogels with surface areas about 1,240 m²/g. Such surface areas are comparable with those obtained under supercritical conditions (aerogels), and higher than those xerogels conventionally obtained under normal condition (500–800 m²/g).     

Sol–gel process of carbon-supported nickel nanoparticles using different solvents and protecting atmospheres

Carbon-supported nickel nanoparticles have been prepared by a sol–gel process under N₂ or H₂ atmospheres using different solvents such as distilled water, ethanol, acetone and 1-propanol. In the aqueous sol–gel process, nickel nanoparticles with pure face-centered-cubic (fcc) phase can be obtained under N₂ atmosphere by using nickel nitrate, tartaric acid and sodium dodecyl sulfonate. When organic solvents are applied, nickel (Π) acetylacetone is required in order to obtain nickel nanoparticles with pure fcc phase under N₂ atmosphere. When the protecting atmosphere is H₂, nickel nitrate can be used to obtain nickel particles with pure fcc phase. Nickel nanoparticles with grain sizes of 4–6 nm in diameter can be prepared by using nickel (Π) acetylacetone [Ni(acac)₂], citric acid and hexadecylamine with solvent being acetone. 1-propanol is also effective in the preparation of nickel nanoparticles in this sol–gel process. We suggest that this sol–gel may be used for other metallic nanocrystals.     

Evaluation of alternative solvents for improvement of oil extraction from rapeseeds

This present study was designed to evaluate the performances of five alternative solvents (alcohols: ethanol, isopropanol and terpenes: d-limonene, α-pinene, p-cymene) compared to n-hexane in rapeseed oil extraction. The extracted oils were quantitatively and qualitatively analyzed to compare the solvents’ performances in terms of kinetics, fatty acid compositions, lipid yields, and classes. Moreover, micronutrients in extracted oils were also respectively quantified by high-performance liquid chromatography (HPLC) and gas chromatography (GC). In addition, the interactions between alternative solvents and rapeseed oil have been theoretically studied with the Hansen solubility methodology to get a better comprehension of dissolving mechanisms. The results indicated that p-cymene could be the most promising solvent for n-hexane substitution with higher lipid yield and good selectivity, despite the micronutrient contents were relatively low.     

New silica hybrids elaborated by sol-gel process from bifunctional thiadiazole and 1,2,4-triazole precursors

New hybrid materials were synthesized from an inorganic precursor, (tetraethoxysilane: TEOS) and bifunctional organic precursors through the sol-gel process. Indeed, monolithic and transparent hybrid gels were obtained by the reaction of tetraethoxysilicate (TEOS) with 1,2,4-thiadiazole-3,5-diamine (1), 5-amino-1,3,4-thiadiazole-2-thiol (2), and 1H-1,2,4-triazole-3-thiol (3) in ethanol as solvent, using chloric acid (HCl 10^?1M) as catalyst. It is shown that TEOS has been cross-linked with bi-functional heterocyclic compounds: (1), (2) and (3) leading to the formation of transparent and colorous gels. The characterization was realized by infrared, ²⁹Si and ¹³C CP MAS NMR. The xerogels morphology and texture were studied by scanning electron microscopy (SEM) and Brunauer – Emmet – Teller method (BET). The obtained results show that organic adducts (1), (2) and (3) react with TEOS leading to gels in which Si–N and Si–S bridges were formed. According to N₂-physisorption results, xerogels are mesoporous with specific surface area varied from 105 to 312 m²g^?1 and their isotherms are classified as type IV. The optic and magnetic properties of hybrids were studied respectively by UV-Vis spectroscopy and RPE. This study showed that all materials are paramagnetic semiconductors.     

Synthesis of Polysiloxane Xerogels Using Tetraethoxysilane/(Diethylphosphatoethyl)triethoxysilane System

The xerogels, containing phosphonic acid groups ≡Si(CH₂)₂P(O)(OC₂H₅)₂ in the surface layer of their particles, are synthesized by the sol-gel method (ethanol as a solvent and fluoride ion as a catalyst). It is shown that, when 2 : 1, 3 : 1, and 4 : 1 tetraethoxysilane/(diethylphosphatoethyl)triethoxysilane ratios are used, nonporous substances are formed, whereas, at 6 : 1, 8 : 1, and 10 : 1 ratios, the xerogels with highly porous structures are produced (the specific surface area is 505–534 m²/g, the sorption pore volume is 0.34–0.53 cm³/g, and the pore diameter is 3.6–4.6 nm).     

金属前躯体溶剂对Pt/ZSM-22催化剂临氢异构性能的影响

将Pt前驱体分别溶解于水、乙醇、丙酮、乙酸中,采用浸渍法制备了一系列成型Pt/ZSM-22催化剂。通过XRD、BET、TEM、CO-chemisorption、CO-FTIR和Py-FTIR等表征手段对催化剂的物相结构、织构性质、金属性质和酸性进行了系统地考察并以正十二烷为模型化合物,研究了前躯体溶剂对临氢异构反应性能的影响。结果表明,溶剂极性是造成Pt分散差异的主要原因;以乙醇、丙酮和乙酸为浸渍溶剂制备的催化剂,Pt多分布于ZSM-22分子筛上,并与酸性位相互作用造成Pt缺电子;而以水为溶剂则造成Pt多分布于氧化铝黏结剂上,对Pt的电子性质影响较小。在临氢异构反应中,与Pt落位于氧化铝相比,Pt分布于ZSM-22分子筛上表现出更高的活性和异构选择性,表明缩短酸性位与金属位间距可使反应物和异构中间体迅速扩散至金属位上发生脱氢和加氢反应。     

Solute–Solvent Interactions of Methyl Violet in Different Solvents on Spectral Data

Spectroscopic studies of Methyl violet in protic (water, methanol, ethanol, isopropanol and n-butanol) and aprotic solvents (acetone, DMF) were carried out. UV-Visible absorption spectra of Methyl violet in protic solvents showed a hypsochromic shift, as the solvent polarity was changed from less polar to more polar, while a bathochromic shift was observed for aprotic solvents. Transition energy of Methyl violet in different solvents was correlated with solvatochromic parameters to study solute–solvents interactions. The Kamlet–Taft, Catalan and unified scale models were applied to investigate interactions between Methyl violet and solvents. The best agreement is found for the Catalan model.     

Synthesis of liquid crystals using Suzuki–Miyaura coupling reactions using mesoporous,ligand-free Pd/Si3N4 catalysts in aqueous media

We report a ligand-free Pd/Si₃N₄ catalysed Suzuki–Miyaura aryl–aryl cross-coupling reaction using mixtures of water-miscible solvents, such as dimethoxyethane, ethanol and isopropanol with water and several bases, such as sodium carbonate and potassium phosphate. The reaction time and catalyst concentration were optimised and the heterogeneous nature of the reaction was investigated. The optimised reaction conditions were used to synthesise a standard liquid crystal using environmentally friendly solvents and a Pd/Si₃N₄ catalyst. This reaction is scalable to produce larger quantities.     

Sensing water in organic solvent using a polyurethane-silica hybrid membrane doped with a luminescent ruthenium complex

We have prepared an ~1.4 μm thin hybrid film from polyurethane (PU) hydrogel and tetraethylorthosilicate (TEOS) by a sol–gel method, and have incorporated the red-luminescent ruthenium-tris-bipyridyl complex. At an optimized ratio of PU/TEOS (1.5:1; w/w) and annealing temperature (60 °C), the membrane sensor exhibits good capability to extract water from organic solvents but also can well retain the ruthenium dye. If contacted with water-containing organic solvents such as acetone or THF, both the luminescence intensity and wavelength change significantly. The response of luminescence intensity to the water fraction in organics is sigmoidal, which can be well fitted with a modified Stern-Volmer equation. The sensor works in the ranges of 0–6 % and 0–12 % (v/v) of water in acetone and THF, respectively, with detection limits of 0.13 % and 0.486 % (v/v).

Synthesis and properties of reversible ionic liquids using CO2, mono- to multiple functionalization

New carbamate based ionic liquids were prepared using different primary amines such as aliphatic, aryl-, di-, and triamines in the presence of organic superbase and CO₂ atmosphere. Many of the prepared compounds can be considered as ionic liquids with low melting points. The reaction conditions based on solvent, type of base, pressure, reaction time, and temperature were optimized and discussed. Tetramethylguanidine (TMG) can be envisaged as an alternative base in order to obtain high yields and purities of carbamate salts specially when primary amines and polyamines are used.The reversibility studies using n-octylamine/DBU and n-octylamine/tetramethylguanidine systems were performed. These studies showed that tetramethylguanidine can lead to more reversible systems while DBU can lead to more stable salts.