Verteilung und Valenz der Kationen in Spinellsystemen mit Eisen und Chrom. III. Gitterkonstanten,Mößbauer-Spektren und Thermokraft der Mischkristalle ZnFeCrO4?Fe2CrO4

Distribution and Valence of the Cations in Spinel Systems with Iron and Chromium. III. Lattice Constants, Mössbauer Spectra, and Seebeck Coefficients of the Solid Solution ZnFeCrO₄? Fe₂CrO₄ For the spinel system Zn_1–x²⁺Fe_x–λ²⁺Fe_λ³⁺(Fe_λ²⁺ · Fe_1?λ³⁺ Cr³⁺)O₄ λ has been determined by lattice constants and ionic distances: λ = 0 in the region 0 ? x ? 0.3; in the region 0.3 < x ? 1 λ increases linearly to 0.44. Mössbauer spectra between x = 0 and x = 0.6 confirm this distribution. All spinels are n-type hopping conductors mainly conducting on the octahedral sites.     

The impact of highly paramagnetic Gd3+ cations on structural,spectral, magnetic and dielectric properties of spinel nickel ferrite nanoparticles

In this work, fabrication of Gd³⁺ substituted nickel spinel ferrite (NiGd_xFe_2-xO₄) nanoparticles was carried out via co-precipitation route. X-ray powder diffraction (XRD) confirmed the spinel cubic structure of NiGd_xFe_2-xO₄ nanoparticles. XRD data also facilitated to determine the divalent and trivalent metal cations distribution at both A and B sites of the ferrite lattice. Site radii, hopping and bond lengths were also calculated from XRD data. The spectral studies elucidated the formation of cubic spinel ferrite structure as well as stretching vibrations of M–O (metal–oxygen) bond at A and B sites of ferrites, represented by two major bands υ₁ and υ₂ respectively. FESEM analysis confirmed the irregular morphology of NiGd_xFe_2-xO₄ nanoparticles. EDX spectrographs estimated the elemental compositions. The dielectric attributes were explained on the basis of the Debye-relaxation theory and Koop’s phenomenological model. At higher applied frequencies (AC) no prominent dielectric loss was observed. Magnetic parameter variations can be attributed to the substitution of the rare earth cations having larger ionic radii as compared to the radii of Fe³⁺ ions. Moreover, spin canting, magneto-crystalline anisotropy and exchange energy of electrons also helped in magnetic evaluation. Due to small coercivity values NiGd_xFe_2-xO₄ nanoparticles can be employed significantly in high-frequency data storage devices.     

Mössbauer Spectroscopy of Spinels

Soon after the discovery of the Mössbauer effect, studies were performed on spinels containing various transition metal ions (mostly Fe²⁺). This method proved very useful for investigating the local symmetry at transition metal ions. In spite of the numerous results, the correct interpretation of the complex quadrupole split spectra is still not given for numerous spinel structures. Since spectra of different shapes were measured for FeAl₂O₄ and FeCr₂O₄ by different authors, we performed new measurements on these spinels. The results on FeAl₂O₄ showed that the statistical distribution of another kind of ions in the positions A may influence the electric field gradient at the Fe²⁺ ions in the tetrahedral interstices. In FeCr₂O₄ and in the mixed Fe_0.5Mg_0.5Cr₂O₄, the electric field gradient exists at the Fe²⁺ ions at room temperature indicating that the degeneracy of the orbital doublet of the Fe²⁺ is removed.     

Removal of Lead(II), Cadmium(II), and Arsenic(III) from Aqueous Solution Using Magnetite Nanoparticles Prepared by Green Synthesis with Box–Behnken Design

Two types of magnetite (Fe₃O₄) nanoparticles were investigated as adsorbents for the simultaneous removal of Pb(II), Cd(II), and As(III) metal ions from aqueous solution. Magnetite nanoparticles were prepared by two synthesis procedures, both using water as solvent, and are referred to as conventional Fe₃O₄ nanoparticles and green Fe₃O₄ nanoparticles. The latter used Citrus limon (lemon) aqueous peel extract as the surfactant. Box–Behnken experimental design was used to investigate the effects of parameters such as initial concentration (20–150?mg?L^?1), pH (2–9), and biomass dosage (1–5?g?L^?1) on the removal of Pb(II), Cd(II), and As(III) ions. The optimum parameters for removal of the studied metal ions from aqueous solutions, including the initial ion concentration (20?mg?L^?1), pH (5.5) and adsorbent dose (5?g?L^?1), were determined. The pseudosecond-order model exhibited the best fit for the kinetic studies, while adsorption equilibrium isotherms were best described by Langmuir and Freundlich models. The optimum conditions were applied for the treatment wastewater. The removal efficiencies of Pb(II), Cd(II), and As(III) using the conventional and green synthesized Fe₃O₄ nanoparticles were 59.4?±?4.3, 18.7?±?1.9 and 17.5?±?1.6, and 98.8?±?5.6, 46.0?±?1.3, and 48.2?±?2.6%, respectively. These results demonstrate the potential of magnetite nanoparticles synthesized using C. limon peel extract as highly efficient adsorbents for the removal of Pb(II), Cd(II), and As(III) ions from aqueous solution.     

Electronic Spectrum and Antiferromagnetic A-B Interactions between Tetrahedral 3d and 3d or 3d Octahedral Cations in Oxidic Lithium Spinels

The compounds chosen to illustrate the interpretation of ligand field spectra of inorganic solids with A-B antiferromagnetic coupling between Fe³⁺ tetrahedral and Fe³⁺ or Cr³⁺ octahedral cations belong to the Li_0.5Fe_xGa_2.5-xO₄ and Li_0.5(FeCr)_xGa_2.5-2xO₄ systems. New features, such as the interpretation of the iron(III) electronic spectrum in ferrimagnetic spinels, the influence of the nature of the superexchange interactions of the pair excitation processes, and the growth of an electronic transition assigned to Cr³⁺ + Fe³⁺ → Cr⁴⁺ + Fe²⁺ intervalence charge transfer at 1.8 eV are reported in this study.     

Oxidation in the γ phase of spinels containing iron II: Influence of defects on the oxidation kinetics and electrical properties

After a review of the distribution of vacancies in defect phases resulting from γFe₂O₃, the authors give several examples drawn from oxidation kinetics and electrical properties, where the vacancies play a basic part due to their concentration as well as their location. The decrease in chemical diffusion coefficient with increase in vacancy extent and the variation of the exponent from the pressure law with the extent of association are dependent on concentration, while the nature of the electron hopping between Fe²⁺ and Fe³⁺ ions is governed by the location of vacancies in the two types of sites in the spinel lattice.     

Magnetic and Mössbauer studies on α-Fe2O3Li2O system

A study has been made of the structural and thermal phase behavior of the mixed system αFe₂O₃xLi₂O with a view toward investigating the changes occurring in the properties of different compositions due to substitution of diamagnetic Li⁺ for Fe³⁺ at B sites in the inverse spinel lattice. This also indicates whether the addition of Li₂O, over and above that (x = 0.2) required for the formation of the spinel LiFe₅O₈, enters the substitutional or interstitial sites. Characterization by X-ray powder diffraction, initial magnetic susceptibility, magnetic hysteresis, Mössbauer spectroscopy, and differential thermal analysis clearly indicates that Li⁺ does not enter the spinel lattice, but forms a biphasic system LiFe₅O₈ and LiFeO₂, which are not miscible.     

Distorsion cristalline et distribution des cations dans les spinelles de la serie CoMnxFe2−xO4

By using neutron diffraction together with anomalous dispersion X-ray diffraction, it has been possible to ascertain the distribution of close atomic numbered cations in CoMn_xFe_2?xO₄ system spinels.At 950°C, these compounds have a cubic structure in the range 0 ? x ? 1.25 and exhibit a macroscopic tetragonal distortion as soon as 60% of the Mn³⁺ ions occupy octahedral sites.The great mobility of cobalt between both types of sites has been pointed out; it can be related to oxidation and reduction phenomena. In these compounds, Fe³⁺ iron remains neutral towards four or six coordinences.     

Mössbauer study of semiconducting and ferrimagnetic fly ash-recycled glass

Summary Room temperature M?ssbauer spectrum of fly ash-recycled glass (FARG), prepared with more than 86 mass% of fly ash and less than 14 mass% of Fe₂O₃, comprises two types of doublets due to Fe(II) and Fe(III) of magnetite nanoparticles. Isothermal annealing of fly ash-recycled glass at 1100 °C for 60 minutes results in a precipitation of ferrimagnetic magnetite phase having an internal magnetic field of 46.4-48.2 T. When the Fe₂O₃ content is equal to or more than 14%, room temperature M?ssbauer spectrum of FARG shows a magnetic hyperfine structure due to a magnetite phase, in addition to two doublets due to Fe(II) and Fe(III). An increase in the electric conductivity is observed from the order of 10^-8 to 10^-6 S ^. cm^-1 after heat treatment at around the crystallization temperature. This can be ascribed to an improved step-by-step electron hopping from Fe(II) to Fe(III) of distorted FeO₄ tetrahedra in the three-dimensional glass network.     

XPES and UVPES studies of iron oxides

X-Ray and uv photoelectron spectra of FeO, Fe₂O₃, and Fe₃O₄ have been studied along with those of a few model compounds. It has been possible to assign distinct bands due to Fe²⁺ and Fe³⁺ in the 3d, 3p, 3s, and 2p bands of Fe₃O₄. The spectra of Fe₃O₄ do not show major changes through the Verwey transition.     

Proprietes magnétiques et étude par spectroscopie Mössbauer des tellurites de fer Fe2Te3O9 et Fe2Te4O11: Structure magnétique de Fe2Te4O11 à 4,2 K

Magnetic study and Mössbauer resonance measurements of the tellurites Fe₂Te₃O₉ and Fe₂Te₄O₁₁ characterize antiferromagnetic ordering. The transition temperatures determined by Mössbauer resonance, are 34 and 27 K, respectively. At 295 K the values of chemical shifts, 0.35 and 0.39 mm/sec, are typical of high-spin Fe(III) in octahedral coordination. Neutron powder diffraction was used to determine the magnetic structure of Fe₂Te₄O₁₁ at 4.2 K. It shows antiferromagnetic interactions between Fe³⁺ ions belonging to [Fe₂O₁₀] groups. The magnetic space group is $\text{P}{}_{\mathrm{2a}}\text{2}{}_1\text{c}$.     

Exploring LiZnNbO4 as a Host for New Colored Compounds: Synthesis,Structure, and Material Properties of NbZn1-x Mx LiO4 (M=Mn,Co, Ni,Fe) and Nb1-ySby Zn1-x Mx LiO4 (M=Co,Ni)

The non - centrosymmetric tetragonal inverse spinel structure of LiZnNbO₄ has been explored with a view to prepare new colored compounds. The substitution of Co²⁺, Ni²⁺, Fe²⁺, Mn²⁺, and Cu²⁺ ions were attempted in the place of Zn²⁺ ions and Sb⁵⁺ ions in place of Nb⁵⁺ ions. The studies indicated that 0.75 Zn²⁺ ions in LiZnNbO₄ can be replaced by Co²⁺ ions and 0.5 Zn²⁺ ions in LiZnNb_0.5Sb_0.5O₄ compound. The substitution of Co²⁺ ions gives rise to different shades of blue color in Li(Zn_1-xCo_x)NbO₄ compounds and from ink blue to blue-green color in Li(Zn_1-xCo_x)(Nb_0.5Sb_0.5)O₄ compounds. The different colors observed in the present study were explained by the traditional allowed d-d transitions as well as the metal-to-metal charge transfer (MMCT) transitions involving Nb⁵⁺ (4d⁰) ions and partially filled 3d electrons. The SHG studies indicate that the prepared compounds are SHG active. All the compounds exhibit reasonable dielectric behavior with low loss. The XPS studies confirm the oxidation states of the different substituted ions. Raman studies indicate variations in the bands due to the substitutions in the parent LiZnNbO₄ phase. Magnetic studies on the Co²⁺ ions substituted compounds suggest antiferromagnetic behavior.     

Infrared spectrum of several double oxides with corundum structure resulting from the transformation of lacunar γ phases with a spinel structure

When aluminum or chormium is substituted by Fe³⁺ ions in α-Fe₂O₃, all the ir bands gradually shift toward high frequencies. Alternatively, for the α phases of type (Fe₂Cr_4?yAl_y)O₉ the transition occurs sharply for a composition y close to 2. For α phases substituted by (Fe_6?yCr_y)O₉-type chromium a linear variation of frequency with chromium content is observed. From ir data it has been shown that, under given temperature and time conditions, an α phase less rich in chromium than the initial product could be obtained by oxidizing iron chromite. The ir spectrum of the oxidation of pure magnetites the size of which is between 1400 and 15000 Å evolves versus the latter to yield either the γ-Fe₂O₃ or the α-Fe₂O₃ phase which can be formed from γ-Fe₂O₃ or by direct oxidation of Fe₃O₄.     

Redox‐Inert Fe3+ Ions in Octahedral Sites of Co‐Fe Spinel Oxides with Enhanced Oxygen Catalytic Activity for Rechargeable Zinc–Air Batteries

Bimetallic cobalt‐based spinel is sparking much interest, most notably for its excellent bifunctional performance. However, the effect of Fe³⁺ doping in Co₃O₄ spinel remains poorly understood, mainly because the surface state of a catalyst is difficult to characterize. Herein, a bifunctional oxygen electrode composed of spinel Co₂FeO₄/(Co_0.72Fe_0.28)_Td(Co_1.28Fe_0.72)_OctO₄ nanoparticles grown on N‐doped carbon nanotubes (NCNTs) is designed, which exhibits superior performance to state‐of‐the‐art noble metal catalysts. Theoretical calculations and magnetic measurements reveal that the introduction of Fe³⁺ ions into the Co₃O₄ network causes delocalization of the Co 3d electrons and spin‐state transition. Fe³⁺ ions can effectively activate adjacent Co³⁺ ions under the action of both spin and charge effect, resulting in the enhanced intrinsic oxygen catalytic activity of the hybrid spinel Co₂FeO₄. This work provides not only a promising bifunctional electrode for zinc–air batteries, but also offers a new insight to understand the Co‐Fe spinel oxides for oxygen electrocatalysis.     

The influence of substituting metals (Ti, V, Cr, Mn, Co and Ni) on the thermal stability of magnetite

In this paper, a systematic study on the influence of substituting metals on the thermal stability of magnetite was carried out. Six series of substituted magnetite (Fe_3?x M _x O₄, M = Ti, V, Cr, Mn, Co and Ni) and Ti–V co-doped magnetite were prepared by a precipitation-oxidation method, followed by the characterization of X-ray diffraction (XRD), X-ray absorption near-edge structure (XANES) spectroscopy and thermogravimetry and differential scanning calorimetry (TG-DSC) analyses. XRD patterns confirmed the formation of samples with spinel structure and XANES probed the valence and site occupancy of the substituting ions. From the TG-DSC analysis results, the substitution of Ti⁴⁺, Mn²⁺, Co²⁺ and Ni²⁺ stabilizes the magnetite structure, while V³⁺ and Cr³⁺ do not show such an effect. For the thermal stability of maghemite, V³⁺ has a negative effect while the other studied ions show a positive effect. In Ti–V co-doped magnetites, the influence of Ti⁴⁺ and V³⁺ on the thermal stability of magnetite is similar to the case of their single-metal-substituted magnetites. The mechanism about the thermal stability change of magnetite by metal substitution was also discussed. The obtained results will be of high importance for the industrial applications of magnetite.     

Application of nano-scale zero-valent iron adsorbed on magnetite nanoparticles for removal of carbon tetrachloride: Products and degradation pathway

Nano-scale zero-valent iron (nZVI) attached to Fe₃O₄ nanoparticles (Fe⁰@Fe₃O₄), which has better dispersibility and a larger specific surface area than the nanoparticles alone, were prepared and applied to the reductive dechlorination of carbon tetrachloride (CT). CT removal efficiencies by Fe⁰@Fe₃O₄ composites with different ratios of the two components were compared. Under optimum conditions, when the Fe⁰/Fe₃O₄ ratio was 1:2, almost no CT was detected after 50 min and it took only about 30 min to reach a removal efficiency of 90%, compared with 120 min for an Fe⁰/Fe₃O₄ ratio of 1:4. An increase in the amount of nZVI in the catalyst effectively improved the removal of CT and accelerated the reaction rate. Chloroform was the main product. Compared with Fe₃O₄ alone, a significant increase in the solution concentrations of ferrous and ferric ions occurred in the Fe⁰@Fe₃O₄ system: both Fe²⁺ and Fe³⁺ reached their maximum concentrations at 60 min and then tended to decline over the next 60 min. The increase in Fe²⁺ concentration was attributed to the reaction between nZVI and CT, which produces ferrous ions when electrons transfer from Fe⁰ to organic chlorides. Synergistic effects between the composite constituents promoted the relative rates of mass transfer to reactive sites and Fe²⁺ generated in solution facilitated the reduction of chlorinated organic pollutants by magnetite. Thus, Fe⁰@Fe₃O₄ nanoparticles effectively achieved reductive dechlorination of CT and provide an improved nZVI catalyst for the remediation of chlorinated organic compounds.     

Contribution de la spectrometrie X à l'étude du manganèse dans les oxydes mixtes de structure spinelle: Analyse du spectre MnKβ et du seuil d'absorption K

Chemical shifts of Kβ_1,3 and Kβ₅ emission bands and X-ray absorption spectra near the K edge have been measured in several manganese spinel oxides with the metal in the formal oxidation states +2, +3, and +4. The position of line MnKβ_1,3 is determined mainly by the valence of manganese. The relative intensity of Kβ′ satellite with respect to the Kβ_1,3 line gives qualitative information about the presence of Mn(II) in mixed oxides. Mn(IV) oxides are characterized by a small chemical shift of the Kβ₅ band unlike Mn(II) and Mn(III) compounds. The first high resolution XANES spectra for these materials were performed at the DCI storage ring at LURE (Orsay, France). The chemical shifts ΔE (K absorption discontinuty) and ΔE_max (main peak) are correlated with the oxidation state of metal. Spectra of Mn³⁺ and Mn⁴⁺ ions in the octahedral environment are characterized by the splitting of 1s → 3d transitions (2 eV). In mixed oxides, the first Mn(II) 1s → 4s-4p transition is observed as a peak (or shoulder) located at 7 eV above the 1s → 3d transition. The study of the X-ray absorption fine structure in the near edge region can be used for qualitative solid-state analysis of mixed oxides such as NiMn₂O₄ or CuMn₂O₄.     

Synthesis and characterization of micron‐sized monodisperse superparamagnetic polymer particles with amino groups

Micron‐sized monodisperse superparamagnetic polyglycidyl methacrylate (PGMA) particles with functional amino groups were prepared by a process involving: (1) preparation of parent monodisperse PGMA particles by the dispersion polymerization method, (2) chemical modification of the PGMA particles with ethylenediamine (EDA) to yield amino groups, and (3) impregnation of iron ions (Fe²⁺ and Fe³⁺) inside the particles and subsequently precipitating them with ammonium hydroxide to form magnetite (Fe₃O₄) nanoparticles within the polymer particles. The resultant magnetic PGMA particles with amino groups were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), X‐ray diffractometry (XRD), and vibrating sample magnetometry (VSM). SEM showed that the magnetic particles had an average size of 2.6 μm and were highly monodisperse. TEM demonstrated that the magnetite nanoparticles distributed evenly within the polymer particles. The existence of amino groups in the magnetic polymer particles was confirmed by FTIR. XRD indicated that the magnetic nanoparticles within the polymer were pure Fe₃O₄ with a spinel structure. VSM results showed that the magnetic polymer particles were superparamagnetic, and saturation magnetization was found to be 16.3 emu/g. The Fe₃O₄ content of the magnetic particles was 24.3% based on total weight. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3433–3439, 2005     

Mössbauer study of the FeV2O4---Fe3O4 system

Mössbauer spectra of the Fe_1+xV_2−xO₄ spinel solid solutions are taken to investigate the cation distribution. Room temperature spectra can be interpreted by assuming that the cation distribution is represented approximately as Fe²⁺[Fe³⁺_xV³⁺_2−x]O₄ for 0 x 0.35 and Fe³⁺[Fe²⁺Fe³⁺_x−1V³⁺_2−x]O₄ for 1 x 2 and the ionic valence arrangement changes from the 2-3-3 type (Fe²⁺[Fe³⁺_xV³⁺_2−x]O₄) to the 3-2-3 one (Fe³⁺[Fe²⁺V³⁺]O₄) in the range 0.35 x 1. Fe₂VO₄ is found to be 3-2-3 spinel, Fe³⁺[Fe²⁺V³⁺]O₄. Its paramagnetic spectrum at 473°K is, however, composed of a broad single line with isomer shift value of 0.61 mm/sec relative to stainless steel, in which the line splitting due to the ferric and ferrous ions is rendered indistinguishable.     

Study of the factors affecting the formation of copper–chromium/aluminum oxide compounds with a spinel structure

The effect of the Cr³⁺/Al³⁺ ratio on the crystallization temperature of mixed oxide compounds with a spinel structure and their structural features and morphological characteristics have been studied using a combination of physicochemical methods: thermal analysis, IR spectroscopy, X-ray powder diffraction, and electron microscopy. The role of temperature of synthesis and drying of Cu–Cr/Al hydroxy precursors in the formation of copper-containing spinels CuCr _x Al_2–x O₄, where x = 0–2, has been elucidated. The results are of interest for selection of the optimal composition and conditions of synthesis and formation of copper-containing spinels for their practical use.