Investigation of spatial self-phase modulation of silver nanoparticles in clay suspension

We have investigated the spatial self-phase modulation (SSPM) phenomena in a clay suspension containing silver nanoparticles. Silver nanoparticles (Ag-NPs) were synthesized in the space of lamellar structure of montmorillonite (MMT) by using chemical reducing agent. The UV-vis spectra of the obtained Ag-NPs showed that the intensity surface plasmon resonance (SPR) peaks increase with increasing in concentration of AgNO₃. The results from Ag-NPs UV-vis spectra were in good agreement with the structure studies performed by TEM. The SSPM phenomena manifestation of the non-linear optical property appeared only when MMT suspension filled with Ag-NPs as shown in the existence of far-field pattern. This property increased with the increase of Ag-NPs concentration and limited to small range.     

Preparation of starch stabilized silver nanoparticles with spatial self-phase modulation properties by laser ablation technique

Silver nanoparticles inside the starch solution have been successfully fabricated by laser ablation of a silver plate immersed in starch solution. The ablation has been done using a Q-switched Nd:YAG laser at 10 Hz repetition rate. The starch solution allows for the formation of silver nanoparticles with uniform particle diameters and well dispersed. The ablation was performed at different time durations to study the influence of the laser ablation time on efficiency of particle formation and sizes. The Spatial Self-phase modulation phenomena which can determine the nonlinear optical property of the samples were also investigated for starch solutions containing silver nanoparticles.     

Reduced graphene oxide supported gold nanoparticles for electrocatalytic reduction of carbon dioxide

Electrochemical reduction of carbon dioxide is one of the methods which have the capability to recycle CO₂ into valuable products for energy and industrial applications. This research article describes about a new electrocatalyst “reduced graphene oxide supported gold nanoparticles” for selective electrochemical conversion of carbon dioxide to carbon monoxide. The main aim for conversion of CO₂ to CO lies in the fact that the latter is an important component of syn gas (a mixture of hydrogen and carbon monoxide), which is then converted into liquid fuel via well-known industrial process called Fischer-Tropsch process. In this work, we have synthesized different composites of the gold nanoparticles supported on defective reduced graphene oxide to evaluate the catalytic activity of reduced graphene oxide (RGO)-supported gold nanoparticles and the role of defective RGO support towards the electrochemical reduction of CO₂. Electrochemical and impedance measurements demonstrate that higher concentration of gold nanoparticles on the graphene support led to remarkable decrease in the onset potential of 240 mV and increase in the current density for CO₂ reduction. Lower impedance and Tafel slope values also clearly support our findings for the better performance of RGOAu than bare Au for CO₂ reduction.

Open image in new window

Graphical abstract ?

     

Diffraction patterns of laser beams with thermal self-phase modulation by optically thin films

Summary A mathematical model of the far-field diffraction pattern of a laser beam with laser heating self-phase modulation through an optically thin film is presented. We deal with the steady-state temperature field generated by the weak absorption of a laser beam in an optically and thermally thin film bounded by two transparent plates, the cell walls, whose thermal exchange to the surrounding ambient has been assumed to be linear in the temperature difference to the ambient. These hypotheses describe the application of the steady-state ?thermal lens? spectroscopy to the detection of the optical or thermal properties of liquid samples. We give a very simple expression for the diffracted intensity that appears suitable for fast computer calculations. The good accuracy of the technique is shown by comparison with the results given by more intricate approaches. To speed up publication, the authors of this paper have agreed to not receive the proofs for correction.     

Synthesis of graphene oxide sheets decorated by silver nanoparticles in organic phase and their catalytic activity

The graphene oxide(GO) sheets decorated by Ag nanoparticles were prepared using a liquid–liquid two-phase method at the room temperature. The synthesized samples existed in the organic phase and were characterized by X-ray diffraction, transmission electron microscopy, UV–vis spectroscopy and Raman spectra. The results demonstrate that these silver-nanoparticles with diameter of about 10 nm assembled on graphene oxide sheets are flexible and can form stable suspensions in organic phase. Raman signals of graphene oxide sheets are increased by the attached silver nanoparticles, displaying higher surface-enhanced Raman scattering activity. Furthermore, Ag/GO are found to serve as effective catalysts to activate the reduction of 4-nitrophenol (4NP) in the presence of NaBH₄.     

Laser-induced self-phase modulation in polymeric films

Self phase modulation is observed in a polymeric thin film for the first time. It is found that this effect can occur at relatively low laser intensity. Experimental results obtained are compared with theoretical predictions.     

EMI shielding effectiveness of graphene decorated with graphene quantum dots and silver nanoparticles reinforced PVDF nanocomposites

Graphene decorated with graphene quantum dots (G-D-GQDs) have been successfully synthesized using solvothermal cutting of graphene oxide. The incorporation of G-D-GQDs in polyvinyledene fluoride (PVDF) matrix shows the total EMI shielding effectiveness (SE_T) of 31 dB at 8 GHz. The main mechanism of high EMI shielding effectiveness is reflection and absorption of EM radiation. The high absorption of EM radiation is due to tunneling of electrons from GQDs. Further, decoration of G-D-GQDs with conducting Ag nanoparticles (G-D-GQDsAg) enhances the SE_T value to 43 dB at 8 GHz of PVDF/G-D-GQDsAg nanocomposite, due to increase in electrical conductivity of PVDF/G-D-GQDsAg nanocomposite and enhanced dispersion of G-D-GQDsAg in PVDF matrix. The incorporation of G-D-GQDs and G-D-GQDsAg in PVDF matrix also increases the thermal stability and crystallinity of PVDF. The increase in thermal stability and crystallinity are more for PVDF/G-D-GQDsAg nanocomposite as compare to PVDF/G-D-GQDs nanocomposite, due to better dispersion of G-D-GQDsAg in PVDF matrix. Thus, PVDF/G-D-GQDsAg nanocomposite having high SE_T value can shield 99.9% of electromagnetic radiation in X-band range, which make it suitable for EMI shielding application for consumer electronic equipment’s.     

Laser-induced growth and reformation of gold and silver nanoparticles

The sizes, shapes, and growth rates of gold and silver nanoparticles stabilized with polyvinylpyrrolidone in water can be controlled by using picosecond laser pulses. The nucleation of small metal clusters formed with NaBH₄ addition to produce nanoparticles takes two months with aging but 30 min with laser irradiation. Laser pulses can also induce nanoparticles to have narrow size and shape distribution or to undergo aggregation into much larger particles. The latter process is more likely found when the metal is silver or the irradiation wavelength is short. Laser-induced growth and shape transformation processes are explained in terms of BH₄ ⁻ depletion, metal fusion, and electron ejection followed by disintegration.     

溶胶Cds毫微晶的自聚焦和自位相调制

本文首次报道了氩离子激光在溶胶CdS半导体毫微晶中产生的自聚焦、热自散焦及自位相调制,实验测得此种材料具有很大的克尔(Kerr)非线性系数n_2,比CS_2大10~5倍。并且,文中还分析了这种具有弱吸收的半导体溶胶毫微晶的非线性自位相调制机理及其与热自位相调制的差别。     

A simple approach for immobilization of gold nanoparticles on graphene oxide sheets by covalent bonding

Amino—functionalized gold nanoparticles with a diameter of around 5 nm were immobilized onto the surface of graphene oxide sheets (GOS) by covalent bonding through a simple amidation reaction. Pristine graphite was firstly oxidized and exfoliated to obtain GOS, which further were acylated with thionyl chloride to give acyl chloride bound GOS. Gold nanoparticles (AuNPs) were functionalized using 4-aminothiophenol in a single-phase system to introduce amino groups on their surface through the well-developed Au-S chemistry. Subsequently, amino groups of AuNPs were reacted with acyl chloride groups of GOS to form a novel hybrid material containing GOS and AuNPs. Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), energy dispersive X-ray (EDX) spectroscopy, ultraviolet-visible (UV-Vis) spectroscopy were used to study the changes in surface functionalities and demonstrate the successful immobilization of AuNPs on GOS surface. High resolution transmission electron microscopy (HR-TEM), field emission scanning electronic microscopy (FE-SEM), and atomic force microscopy (AFM) were employed to investigate the morphologies of prepared AuNPs and their distribution onto the GOS surface. Thermogravimetric analysis (TGA) was used to characterize the thermal stability of the samples on heating.     

Intracavity self-phase modulation and pulse compression in mode-locked lasers

We show that in the presence of a bandwidth-limiting component intracavity selfphase modulation in high power mode-locked and Q-switched lasers is accompanied by interesting pulse-shaping phenomena. If the phase modulation is properly controlled the pulse duration can approach the limit given by the frequency bandwidth of the laser. For example, for a Nd: YAG laser our calculations predict an intracavity pulse compression by approximately a factor of ten over the typical pulse duration of conventional mode-locking.     

Strong self-phase modulation in planar chalcogenide glass waveguides

Single-mode planar waveguides were fabricated from chalcogenide glass compounds with large Kerr nonlinearities. Strong self-phase modulation of subpicosecond pulses along with low linear and nonlinear absorption losses demonstrates the potential for ultrafast, low-power, all-optical processing applications.     

Two-photon absorption and self-phase modulation measurements with shaped femtosecond laser pulses

We show that phase-sensitive detection of spectral hole refilling can yield information about self-phase modulation and two-photon absorption coefficients. We expect that, when applied to tissue microscopy, this technique will allow the study of endogenous molecular markers beneath the surface, even if those markers are nonfluorescent.     

Evaluation of the sonosensitizing properties of nano-graphene oxide in comparison with iron oxide and gold nanoparticles

In cancer hyperthermia, ultrasound is considered as an appropriate source of energy to achieve desired therapeutic levels of heating. It is assumed that such a heating is targeted to cancer cells by using nanoparticles as sonosensitization agents. Here, we report the sonosensitizing effects of Nano-Graphene Oxide (NGO) and compare them with gold nanoparticles (AuNPs), Iron Oxide nanoparticles (IONPs).Experiments were conducted to explore the effects of nanoparticle type and concentration, as well as ultrasound power, on transient heating up of the solutions exposed by 1 MHz ultrasound. Nanoparticles concentration was selected from 0.25 to 2.5 mg/ml and the solutions were exposed by ultrasound powers from 1 to 8 W. Real time temperature monitoring was done by a thermocouple and obtained data was analyzed.Temperature profiles of various nanoparticle solutions showed the higher heating rates, in comparison to water. Heating rise was strongly depended on nanoparticles concentration and ultrasound power. AuNPs showed a superior efficiency in heat generation enhancement in comparison to IONPs and NGO.Our result supports the idea of sonosensitizing capabilities of AuNPs, IONPs, and NGO. Targeted hyperthermia may be achievable by preferential loading of tumor with nanoparticles and subsequent ultrasound irradiation.     

Diffraction patterns and nonlinear optical properties of gold nanoparticles

Stable gold nanoparticles have been prepared by using soluble starch as both the reducing and stabilizing agents; this reaction was carried out at 40 °C for 5 h. The obtained gold nanoparticles were characterized by UV–Vis absorption spectroscopy, transmission electron microscopy (TEM) and z-scan technique. The size of these nanoparticles was found to be in the range of 12–22 nm as analyzed using transmission electron micrographs. The optical properties of gold nanoparticles have been measured showing the surface plasmon resonance. The second-order nonlinear optical (NLO) properties were investigated by using a continuous-wave (CW) He–Ne laser beam with a wavelength of 632.8 nm at three different incident intensities by means of single beam techniques. The nonlinear refractive indices of gold nanoparticles were obtained from close aperture z-scan in order of 10^?7 cm²/W. Then, they were compared with diffraction patterns observed in far-field. The nonlinear absorption of these nanoparticles was obtained from open aperture z-scan technique. The values of nonlinear absorption coefficient are obtained in order of 10^?1 cm/W.     

Concentration of energy inside laser-irradiated gold and silver plasmon nanoparticles in air

We simulated laser-intensity distribution inside spherical gold and silver nanoparticles with radii between 10 and 100 nm, which are exposed to laser radiation at 400, 532, and 800 nm in air, and analyzed the results. The effect of high energy concentration inside illuminated (front) and shadowed (back) hemispheres of gold and silver nanoparticles is established for several nanoparticle sizes and laser wavelengths. The results can be used in nanophotonics of new plasmon devices (concentrators, antennas, etc.) and photon components.     

Sonication-assisted layer-by-layer deposition of gold nanoparticles for highly conductive gold patterns

Sonication-assisted layer-by-layer (LBL) deposition of gold nanoparticles (GNPs) was carried out in an attempt to prepare highly conductive gold patterns on polyimide substrates. First, sonication time was optimized with GNPs (12.8 nm) whose size was large enough to be analyzed by FE-SEM in order to evaluate the surface coverage. Next, multilayer formation (4, 8 and 12 layer) was confirmed using ethanedithiol (EDT) as linker molecules under optimized conditions by measuring their UV absorption, near-IR (NIR) transmittance, thickness, and electrical conductivity. Finally, 20-layer films using small GNPs (2.5 nm) were prepared with or without patterning, followed by sintering at 150 °C for 1 h, which provided clean gold patterns with high electrical conductivity (2.5 × 10⁵ Ω⁻¹ cm⁻¹).