Synthesis of the mixed oxide catalysts based upon the nickel-copper hydrotalcites of the type Ni<Subscript>x</Subscript>Cu<Subscript>6-x</Subscript>Cr<Subscript>2</Subscript>(OH)<Subscript>16</Subscript>(CO<Subscript>3</Subscript>)×4H<Subscript>2</Subscript>O

Summary High resolution TG coupled to a gas evolution mass spectrometer has been used to study the thermal properties of a chromium based series of Ni/Cu hydrotalcites of formulae Ni_xCu_6-xCr₂(OH)₁₆(CO₃)×4H₂O where x varied from 6 to 0. The effect of increased Cu composition results in the increase of the endotherms and mass loss steps to higher temperatures. Evolved gas mass spectrometry shows that water is lost in a number of steps and that the interlayer carbonate anion is lost simultaneously with hydroxyl units. Differential scanning calorimetry was used to determine the heat flow steps for the thermal decomposition of the synthetic hydrotalcites. Hydrotalcites in which M²⁺ consist of Cu, Ni or Co form important precursors for mixed metal-oxide catalysts. The application of these mixed metal oxides is in the wet catalytic oxidation of low concentrations of retractable organics in water. Therefore, the thermal behaviour of synthetic hydrotalcites, Ni_xCu_6-xCr₂(OH)₁₆CO₃×nH₂O was studied by thermal analysis techniques in order to determine the correct temperatures for the synthesis of the mixed metal oxides.     

Kinetics of the oxidation of diethyl sulfide in the B(OH)<Subscript>3</Subscript>-H<Subscript>2</Subscript>O<Subscript>2</Subscript>/H<Subscript>2</Subscript>O system

Data obtained for the kinetics of oxidation of diethyl sulfide (Et₂S) by hydrogen peroxide in aqueous solution catalyzed by boric acid indicate that monoperoxoborates B(O₂H)(OH) ₃ ⁻ and diperoxoborates B(O₂H)₂(OH) ₂ ⁻ are the active species. The rates of the reactions of Et₂S with B(O₂H)(OH) ₃ ⁻ and B(O₂H)₂(OH) ₂ ⁻ are 2.5 and 100 times greater than with H₂O₂. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 1, pp. 38–42, January–February, 2007.     

The dissolution of ThO<Subscript>2</Subscript>(cr) in carbonate solutions and a granitic groundwater

ThO₂(cr) was dissolved in the solutions containing various carbonate ion concentrations, and the results were compared with thorium solubility in a domestic granitic groundwater having very low ionic strength. The soluble thorium concentration excluding colloids after phase separation increased with increasing carbonate concentration. However, the thorium concentration in the real groundwater was remarkably greater than that in the carbonate-containing solutions with a similar concentration of carbonate and pH condition. This might be attributable to other species as well as Th(OH)₄(aq) and Th(OH)₃(CO₃)⁻. These species form colloids or precipitates, and their concentration can be reduced in the ultra-filtered solution by an aging effect.     

Chemistry of the CARBEX process: Identification of absorption bands of the ligands in the electronic spectra of aqueous solutions of Na<Subscript>4</Subscript>[UO<Subscript>2</Subscript>(O<Subscript>2</Subscript>)CO<Subscript>3</Subscript>)<Subscript>2</Subscript>]

On the basis of consideration of dissociation, hydration, association, and ligand exchange, the assignment of absorption bands in the electronic spectra of aqueous solutions of the Na₄[UO₂(O₂)CO₃)₂] complex has been performed. It has been demonstrated that the absorption in the range 190–400 nm is caused by the oxygen atoms of the O₂^2- and CO₃^2- groups and hydration water molecules of dissociated and neutral complex species Na₃[UO₂(O₂)(CO₃)₂]^–, Na₂[UO₂(O₂)(CO₃)₂]^2–, and Na₄[UO₂(O₂)(CO₃)₂].     

Chemistry of the CARBEX process: Identification of absorption bands of the ligands in the electronic spectra of aqueous solutions of Na<Subscript>4</Subscript>[UO<Subscript>2</Subscript>(CO<Subscript>3</Subscript>)<Subscript>3</Subscript>]

On the basis of consideration of hydration, hydrolysis, dissociation, polymerization, and ligand exchange that occur in aqueous solutions of U(VI) complexes, a new approach to the assignment of absorption bands of the ligands in electronic spectra of uranium(VI) carbonate complexes in the range 190–400 nm has been suggested. For the Na₄[UO₂(CO₃)₃] complex, the following assignment of absorption bands has been made: Na₃[UO₂(CO₃)₃]^–, 258 nm; Na₂[UO₂(CO₃)₃]^2–, 300 nm; and Na₄[UO₂(CO₃)₃], 330 nm.     

Gradual transformation of Ca(OH)<Subscript>2</Subscript> into CaCO<Subscript>3</Subscript> on cement hydration

The low temperature of decomposition of some calcium carbonates and the bending of the TG curves of hydrated cement between 500 and 800°C suggested the presence of some complex compound(s), which needed complementary investigation (XRD, TG). Stepwise transformation of portlandite (and/or lime) into calcium carbonate, with intermediate steps of calcium carbonate hydroxide hydrates (CCH-1 to CCH-5), was indicated by the previous study of two OPC. This was checked here on four cements ground for t _g=15, 20, 25 and 30 min and hydrated either in water vapour, successively at RH=1.0, 0.95 and 0.5 for 2 weeks each (WR1, WR2 and WR3, respectively) or as mortars in liquid water (1m), followed by WR as above. The d[001] spacing of portlandite was confirmed to vary: here between the lowest and the highest standard values. The diffractograms of n=32 different samples were analyzed for presence of standard CCH peaks, generally slightly displaced. These were: CCH-1 [Ca₃(CO₃)₂(OH)₂]: N=11 peaks, of three different d[hkl] spacings, CCH-2 [Ca₆(CO_2.65)₂(OH₆₅₇)₇(H₂O)₂]: N=10 for two d[hkl], CCH-3 [Ca₃(CO₃)₂(OH)₂·1.5H₂O]: N=14 for five d[hkl], CCH-4, ikaite [CaCO₃(H₂O)₆]: N=13 for six d[hkl], CCH-5[CaCO₃(H₂O)]: N=15 for five d[hkl]. Thus the most probable is the presence of the last three. The stepwise transformation of Ca(OH)₂ into CaCO₃ was confirmed:     

Organometallic coordination polymers based on silver carboxylates: [AgCF<Subscript>3</Subscript>CO<Subscript>2</Subscript>(2,3-Et<Subscript>2</Subscript>Pyz)] and [AgCF<Subscript>3</Subscript>CO<Subscript>2</Subscript>(Bpeta)]

Coordination polymers [AgCF₃CO₂(2,3-Et₂Pyz)](I)(2,3-Et₂Pyz-C₈H₁₂N₂) and [AgCF₃CO₂(Bpeta)] (II) (Bpeta is 4′4-bipyridylethane, C₁₂H₁₂N₂) are synthesized. Their structures are determined. The crystals of compound I are monoclinic, space group P2(1)/n, a = 7.185(1), b = 14.754(1), c = 12.317(1)Å, β = 97.09(1)°, V = 1295.7(2) ų, ρ_calcd = 1.831 g/cm³, Z = 4. Structure I consists of infinite chains of doubled polymeric chains joined by silver carboxylate dimers [[Ag₂(CF₃CO₂)₂(Et₂Pyz)₂]_∞. The coordination polyhedron of Ag⁺ is a distorted tetrahedron. The crystals of compound II are orthorhombic, space group Pbca, a = 13.555(3), b = 13.991(3), c = 16.449(3) Å, V = 3119.5(11) ų, ρ_calcd = 1.725 g/cm³, Z = 8. Doubled polymeric chains with the Ag…Ag bond (3.16 Å) are also formed in structure II. Supramolecular layers are formed in the structure due to the weak π-π-stacking interaction between the aromatic groups of chains. The CF₃CO ₂ ^? anion is weakly bound to Ag⁺ (Ag-O_avg 2.790 Å).     

Synthesis and equilibria in solutions of hafnium fluoro complexes with phosphoryl-containing bases Ph<Subscript>3</Subscript>PO,Bu<Subscript>3</Subscript>PO,and (Me<Subscript>2</Subscript>N)<Subscript>3</Subscript>PO

The composition and equilibria in solutions of the products of reaction of HfF₄(dmso)₂ with monodentate phosphoryl-containing bases L = Ph₃PO, Bu₃PO, and (Me₂N)₃PO in CH₂Cl₂ are studied by ¹⁹F NMR. Octahedral molecular complexes cis-[HfF₄L₂] and minor amounts of trans-[HfF₄L₂] and fac-[HfF₃L₃]⁺ cations were the main products for all ligands. The oxytrifluoride complex (μ-O)[HfF₃(Bu₃PO)₂]₂ and the [HfF₅(Bu₃PO)]^– anion were identified in the case of Bu₃PO. The conclusion about the formation of the hafnium oxytrifluoro complex was verified via hydrolysis of the product of reaction between HfF₄ and Ph₃PO upon exposure to air. As a result, (μ-O)[HfF₃(Ph₃PO)₂]₂ were detected; fine-structure ¹⁹F NMR resonance lines were obtained and the spin–spin coupling constant J_FF was measured for the first time. Hydrolysis via adding a Bu₄NOH solution in i-PrOH to the HfF₄L₂ solutions in CH₂Cl₂ did not yield the expected zirconium oxyfluoro complexes with the smaller number of fluorine atoms. Due to deeper hydrolysis, equilibrium in fluoride complexes shifted towards species with higher fluorine contents, [ZrF₅L]^– and [ZrF₆]^2–, resulting in the formation of Hf(O)_x(OH)_у(i-PrOH)_z complexes that were not observed in the ¹⁹F NMR spectra and the substitution of the released fluoride ions for molecular ligands in HfF₄L₂ complexes.     

Gas phase structure of micro-hydrated [Mn(ClO<Subscript>4</Subscript>)]<Superscript>+</Superscript> and [Mn<Subscript>2</Subscript>(ClO<Subscript>4</Subscript>)<Subscript>3</Subscript>]<Superscript>+</Superscript> ions probed by infrared spectroscopy

Gas-phase infrared photodissociation spectroscopy is reported for the microsolvated [Mn(ClO₄)(H₂O) _n ]⁺ and [Mn₂(ClO₄)₃(H₂O) _n ]⁺ complexes from n = 2 to 5. Electrosprayed ions are isolated in an ion-trap where they are photodissociated. The 2600–3800 cm⁻¹ spectral region associated with the OH stretching mode is scanned with a relatively low-power infrared table-top laser, which is used in combination with a CO₂ laser to enhance the photofragmentation yield of these strongly bound ions. Hydrogen bonding is evidenced by a relatively broad band red-shifted from the free OH region. Band assignment based on quantum chemical calculations suggest that there is formation of water—perchlorate hydrogen bond within the first coordination shell of high-spin Mn(II). Although the observed spectral features are also compatible with the formation of structures with double-acceptor water in the second shell, these structures are found relatively high in energy compared with structures with all water directly bound to manganese. Using the highly intense IR beam of the free electron laser CLIO in the 800–1700 cm⁻¹, we were also able to characterize the coordination mode (η²) of perchlorate for two clusters. The comparison of experimental and calculated spectra suggests that the perchlorate Cl—O stretches are unexpectedly underestimated at the B3LYP level, while they are correctly described at the MP2 level allowing for spectral assignment.     

Indium strontium hydrogen phosphate SrIn<Subscript>2</Subscript>[PO<Subscript>3</Subscript>(OH)]<Subscript>4</Subscript>: Synthesis and crystal structure

Indium strontium hydrogen nitrate SrIn₂[PO₃(OH)]₄ was synthesized under mild hydrothermal conditions (T = 180 or 200°C) and characterized using IR spectroscopy, chemical analysis, and thermal analysis. A structure model obtained ab initio was refined by the Rietveld method: a= 9.6412(1) Å, b = 13.763(1) Å, c = 9.3579(1) Å, R _obs = 0.0183, R _p = 0.0493 (space group B22₁2, Z = 4). The acentricity of the structure was confirmed by SHG tests (I _2ω/I _2ω(SiO2) ≈ 2.0). In the SrIn₂[PO₃(OH)]₄ structure, indium atoms reside in distorted InO₆ octahedra and form, together with PO₃(OH) tetrahedra, a mixed 3D structure {In₂[PO₃(OH)]₄} _3∞ ^2? whose voids are occupied by Sr²⁺ cations (CN = 8). The block-dimer In₂(HPO₄)₁₀ is the most informative unit of the framework. Blocks are condensed into infinite columns running in the [101] direction. The compound is thermally stable up to 400°C.     

Reactions of Beryllium Halides in Liquid Ammonia: The Tetraammineberyllium Cation [Be(NH3)4]2+, its Hydrolysis Products,and the Action of Be2+ as a Fluoride‐Ion Acceptor

The first structural characterization of the text‐book tetraammineberyllium(II) cation [Be(NH₃)₄]²⁺, obtained in the compounds [Be(NH₃)₄]₂Cl₄ ? 17NH₃ and [Be(NH₃)₄]Cl₂, is reported. Through NMR spectroscopic and quantum chemical studies, its hydrolysis products in liquid ammonia were identified. These are the dinuclear [Be₂(μ‐OH)(NH₃)₆]³⁺ and the cyclic [Be₂(μ‐OH)₂(NH₃)₄]²⁺ and [Be₃(μ‐OH)₃(NH₃)₆]³⁺ cations. The latter species was isolated as the compound [Be₃(μ‐OH)₃(NH₃)₆]Cl₃ ? 7NH₃. NMR analysis of solutions of BeF₂ in liquid ammonia showed that the [BeF₂(NH₃)₂] molecule was the only dissolved species. It acts as a strong fluoride‐ion acceptor and forms the [BeF₃(NH₃)]^? anion in the compound [N₂H₇][BeF₃(NH₃)]. The compounds presented herein were characterized by single‐crystal X‐ray structure analysis, ⁹Be, ¹⁷O, and ¹⁹F NMR, IR, and Raman spectroscopy, deuteration studies, and quantum chemical calculations. The extension of beryllium chemistry to the ammine system shows similarities but also decisive differences to the aquo system.     

A Quantum Chemical Study of C<Subscript>60</Subscript>Cl<Subscript>30</Subscript>, C<Subscript>60</Subscript>(OH)<Subscript>30</Subscript> Molecules and Fe@C<Subscript>60</Subscript>(OH)<Subscript>30</Subscript> Endocomplex

(U)PBE0/cc-pVDZ method is used to study the structure of C₆₀Cl₃₀, C₆₀(OH)₃₀ molecules and Fe@C₆₀(OH)₃₀ endocomplex. The triplet state of the endocomplex is shown to be the lowest in energy among its four states corresponding to different spin multiplicities and positions of Fe nucleus within the fullerene cavity. This state is characterized by bonding between the iron atom and one of two benzenoid cycles of the carbon cage, six internuclear Fe–C distances (208 pm), and 1s²2s²2p⁶3s²3p⁶3d^7.24s^0.14p^0.3 electron configuration of iron with spin population of 2.36.     

Synthesis and study of sodium triuranate Na<Subscript>2</Subscript>(UO<Subscript>2</Subscript>)<Subscript>3</Subscript>O<Subscript>3</Subscript>(OH)<Subscript>2</Subscript>

Sodium triuranate Na₂(UO₂)₃O₃(OH)₂ was synthesized by the reaction between aqueous uranyl acetate solution and aqueous sodium nitrate solution under hydrothermal conditions at 200°C. The composition and structure of the synthesized compound were determined, and its dehydration and thermal decomposition were studied, by chemical analysis, X-ray diffraction, IR spectroscopy, and thermal analysis.     

The synthesis and thermochemical study of (Mg,Fe)<Subscript>3</Subscript>Si<Subscript>2</Subscript>O<Subscript>5</Subscript>(OH)<Subscript>4</Subscript> nanotubes

Nanotubular (Mg,Fe²⁺,Fe³⁺)₃Si₂O₅(OH)₄ hydrosilicates with a chrysotile structure were synthesized under hydrothermal conditions. The phases prepared were studied thermochemically on a high-temperature Tian-Calvet microcalorimeter by solution calorimetry. The standard enthalpies of formation of magnesium-iron nanotubular hydrosilicates were determined. The formation of iron-containing nanotubes was shown to be lass favorable energetically than the formation of magnesium nanotubes.     

Hydrothermal Syntheses and Crystal Structures of Two New Heteropolyoxovanadoborates Containing {(VO)<Subscript>12</Subscript>O<Subscript>6</Subscript>[B<Subscript>3</Subscript>O<Subscript>6</Subscript>(OH)]<Subscript>6</Subscript>(H<Subscript>2</Subscript>O)} Cluster

Two new heteropolyoxovanadoborates (H₂dap)₂H₆{(VO)₁₂O₆[B₃O₆(OH)]₆(H₂O)}·13H₂O (1, dap = 1,2-diaminopropane) and {[Zn(dien)]₂[Zn(dien)(H₂O)]₄(VO)₁₂O₆[B₃O₆(OH)]₆(H₂O)}₂·15H₂O (2, dien = diethylenetriamine) have been hydrothermally synthesized and structurally characterized. Both 1 and 2 contain {(VO)₁₂O₆[B₃O₆(OH)]₆(H₂O)} cluster (denoted on V₁₂B₁₈), which is constructed by a puckered B₁₈O₃₆(OH)₆ ring sandwiched between two triangles of six alternating cis and trans edge-sharing vanadium atoms, and a central water molecule. 1 consists of discrete [V₁₂B₁₈]¹⁰⁻ cluster anions with H₂dap²⁺ as counterions, while 2 consists of discrete neutral {[Zn(dien)]₂[Zn(dien)(H₂O)]₄[V₁₂B₁₈]} clusters, which are built from two types of zinc(II) complex fragments connecting with V₁₂B₁₈ cluster through two Zn-(μ ₃-O)-B bonds. Interestingly, 2 is the only example of the V₁₂B₁₈ cluster decorated by two types of zinc(II) complex fragments.     

Degree of hydration in cement paste and C<Subscript>3</Subscript>A-sodium carbonate-water systems

This research provides a fundamental understanding of the early stage hydration of Portland cement paste, tricalcium aluminate (C₃A) paste at water to cement ratio of 0.5 and C₃A suspension at water to cement ratio of 5.0 modified by 2 or 4 mass% of sodium carbonate. A high conversion of unreacted clinker minerals to gel-like hydration products in the cement-Na₂CO₃ pastes takes place rapidly between 1^st to 24^th h. Contrary the Ca(OH)₂ formation within the same time interval is retarded in the excess of CO₃²⁻ ions due to intensive rise and growth of CaCO₃ crystals in hydrated cement. Later, the conversion of clinker minerals to the hydrate phase is reduced and higher contents of calcite and vaterite relative to that of Ca(OH)₂ in comparison with those found in the Portland cement paste are observed. As a consequence a decrease in strength and an increase in porosity between hardened Portland cement paste without sodium carbonate and those modified by Na₂CO₃ are observed. C₃A hydrates very quickly with sodium carbonate between 1^st and 24^th h forming hydration products rich in bound water and characterized also by complex salts of (x)C₃A·(y)CO₂·(zH₂O type, whereas C₃A-H₂O system offers C₃AH₆ as the main hydration product. Higher content of the formed calcium aluminate hydrates in C₃A-Na₂CO₃-H₂O system also contributes to early strength increase of Portland cement paste.     

Synthesis,characterization, and biphasic ionic liquid media 1-hexene hydrogenation reaction of RuCl<Subscript>2</Subscript>(DMSO)<Subscript>2</Subscript>(NC<Subscript>5</Subscript>H<Subscript>4</Subscript>CO<Subscript>2</Subscript>Na-3)<Subscript>2</Subscript>

RuCl₂(DMSO)₂(NC₅H₄CO₂Na-3)₂ is very soluble in the ionic liquid (IL) 1-n-butyl-3-methylimidazolium tetrafluoroborate, [(BMIM)BF₄]. The complex was prepared by reacting RuCl₂(DMSO)₄ with NC₅H₄CO₂Na-3, sodium nicotinate, in toluene, and was characterized by spectroscopic methods. The complex catalyzes the hydrogenation of 1-hexene (600 psi H₂, 100 °C) in a two-phase system consisting of cyclohexane/[(BMIM)BF₄] with 75% conversion in 24 h and modest substrate isomerization. The complex shows good stability and can be reused several times with little loss in activity.     

Ion state of atoms and the properties of perovskite-like compound CaCu<Subscript>3</Subscript>V<Subscript>4</Subscript>O<Subscript>12</Subscript>

The binding energies and valence state of atoms in the perovskite-like compound CaCu₃V₄O₁₂ have been determined using XPS spectroscopy. The stoichiometry of this phase is formulated as Ca²⁺Cu²⁺Cu ₂ ⁺ (V ₂ ⁵⁺ V ₂ ⁴⁺ O₁₂). Under an air atmosphere, the phase interacts with water vapor and oxygen. As a result, Ca(OH)₂ is formed on its surface, the Cu⁺ and V⁴⁺ ion concentrations decrease, and the Cu²⁺ and V⁵⁺ concentrations increase in association. Raman spectra show shortened cation-anion bond lengths and cation-anion-cation bond angles in CaCu₃V₄O₁₂ compared to perovskite CuVO₃; the two structures are alike. The electrical conductivity, magnetic susceptibility, thermal and sensor properties of CaCu₃V₄O₁₂ in aqueous salt solutions have been studied.     

Adsorption behavior of <Superscript>99</Superscript>Tc on Fe,Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> and Fe<Subscript>2</Subscript>O<Subscript>4</Subscript>

Summary The adsorption of ⁹⁹Tc on the adsorbers Fe, Fe₂O₃ and Fe₃O₄ was studied by batch experiments under aerobic and anoxic conditions. The effects of pH and CO₃^2- concentration of the simulated ground water on the adsorption ratios were also investigated, and the valences of Tc in solution after the adsorption equilibrium were studied by solvent extraction. The adsorption isotherms of TcO₄- on the adsorbers Fe, Fe₂O₃ and Fe₃O₄ were determined. Experimental results have shown that the adsorption ratio of Tc on Fe decreases with the increase of pH in the range of 5-12 and increases with the decrease of the CO₃^2- concentration in the range of 10^-8M-10^-2M. Under aerobic conditions, the adsorption ratios of ⁹⁹Tc on Fe₂O₃ and Fe₃O₄ were not influenced by pH and CO₃^2-concentration. When Fe was used as adsorbent, Tc existed mainly in the form of Tc(IV) after equilibrium and in the form of Tc(VII) when the adsorbent was Fe₂O₃ or Fe₃O₄ under aerobic conditions. The adsorption ratios of Tc on Fe, Fe₂O₃ and Fe₃O₄ decreased with the increase of pH in the range of 5-12 and increased with the decrease of the CO₃^2- concentration in the range of 10^-8M-10^-2M under anoxic conditions. Tc existed mainly in the form of Tc(IV) after equilibrium when Fe, Fe₂O₃ and Fe₃O₄ was the adsorbent under anoxic conditions. The adsorption isotherms of TcO_4- on the adsorbers Fe, Fe₂O₃ and Fe₃O₄ are fairly in agreement with the Freundlich’s equation under both aerobic and anoxic conditions.     

Theoretical study on the reaction mechanism of (CH<Subscript>3</Subscript>)<Subscript>3</Subscript>CO<Superscript>.</Superscript> radical with NO

The reaction mechanism of (CH₃)₃CO^. radical with NO is theoretically investigated at the B3LYP/6-31G* level. The results show that the reaction is multi-channel in the single state and triplet state. The potential energy surfaces of reaction paths in the single state are lower than that in the triple state. The balance reaction: (CH₃)₃CONO⇔(CH₃)₃CO^.+NO, whose potential energy surface is the lowest in all the reaction paths, makes the probability of measuring (CH₃)₃CO^. radical increase. So NO may be considered as a stabilizing reagent for the (CH₃)₃CO^. radical.