Dendron‐Containing Tetraphenylethylene Compounds: Dependence of Fluorescence and Photocyclization Reactivity on the Dendron Generation

The synthesis and characterization of four dendron‐containing tetraphenylethylenes (TPEs), 1₁ – 1₄ , were synthesized, along with a TPE compound that contained four OCH₂Ph groups (referred to as 1₀ ) for comparison. Photophysical studies revealed that the TPE core became emissive after linking dendrons onto its periphery. Moreover, the fluorescence intensity was significantly enhanced when high‐generation dendrons were linked onto the TPE core; the fluorescence intensity increased in the following order: 1₁ < 1₂ < 1₃ < 1₄ . This phenomenon was tentatively attributed to an enhancement in the energy barrier for internal rotation and torsion of the TPE core to which four dendrons were connected. In addition, the photocyclization of the TPE core into the respective 9,10‐diphenylphenanthrene was facilitated when high‐generation dendrons were linked to the TPE core. Again, the photocycliztion reactivity increased in the following order: 1₁ < 1₂ < 1₃ < 1₄ . We found that the fluorescence and photocyclization reactivity of TPE could be modulated by covalent interactions with dendrons, and such modulation was strongly dependent on the dendron‐generation.     

Synthesis and characterization of novel pyrene-dendronized porphyrins exhibiting efficient fluorescence resonance energy transfer: optical and photophysical properties

A novel series of pyrene dendronized porphyrins bearing two and four pyrenyl groups (Py(2)-TMEG1 and Py(4)-TMEG2) were successfully synthesized. First and second generation Fréchet type dendrons (Py(2)-G1OH and Py(4)-G2OH) were prepared from 1-pyrenylbutanol and 3,5-dihydroxybenzyl alcohol. These compounds were further linked to a trimesitylphenylporphyrin containing a butyric acid spacer via an esterification reaction to obtain the desired products. Dendrons and dendronized porphyrins were fully characterized by FTIR and (1)H NMR spectroscopy and their molecular weights were determined by matrix-assisted laser desorption ionization time of flight mass spectrometry. Their optical and photophysical properties were studied by absorption and fluorescence spectroscopies. The formation of dynamic excimers was detected in the pyrene-labeled dendrons, with more excimer being produced in the higher generation dendron. The fluorescence spectra of the pyrene dendronized porphyrins exhibited a significant decrease in the amount of pyrene monomer and excimer emission, jointly with the appearance of a new emission band at 661 nm characteristic of porphyrin emission, an indication that fluorescence resonance energy transfer (FRET) occurred from one of the excited pyrene species to the porphyrin. The FRET efficiency was found to be almost quantitative ranging between 97% and 99% depending on the construct. Model Free analysis of the fluorescence decays acquired with the pyrene monomer, excimer, and porphyrin core established that only residual pyrene excimer formation in the dendrons could occur before FRET from the excited pyrene monomer to the ground-state porphyrin core.     

Optical switching and antenna effect of dendrimers with an anthracene core

Dendrimers 6G(i) (i=1-4) consisting of an anthracene core and Fréchet dendrons which are attached via a CH(2)OCH(2) chain in the 9-position undergo quantitative and completely reversible intramolecular [4pi+4pi] cycloaddition. The process can be monitored by absorption and fluorescence measurements. The Fréchet dendrons act as an energy funnel that collects and focuses the photon energy but does not change the photostationary states, which for both directions are completely on the product side when the separate chromophores are selectively irradiated. The quantum yields of anthracene fluorescence and of singlet energy transfer from the dendrons to the core were studied as a function of dendrimer generation.     

Synthesis of fluorescent diarylethenes having a 2,4,5-triphenylimidazole chromophore

Diarylethenes 1a-4a, having a fluorescent 2,4,5-triphenylimidazole chromophore in the aryl group, were synthesized. Upon excitation of the triphenylimidazole chromophore with 366 nm, 1a-4a underwent photocyclization reactions, and the solutions containing 1a-4a changed color from colorless to red-purple or to blue. The colors disappeared by irradiation with visible (lambda > 480 nm) light. The fluorescence intensity of the solutions also reversibly changed with the photochromic reactions. The fluorescence quantum yields of 1a, 2a, 3a, and 4a were determined to be 4.6, 7.7, 9.1, and 8.4%, respectively. The fluorescence quantum yields decreased with the increase in photocyclization quantum yields.     

Effective enhancement of the emission efficiency of tetraphenylporphyrin in solid state by tetraphenylethene modification

Evidently enhanced red emission efficiency from the solid state of tetraphenylporphyrin derivative was achieved by modification with tetraphenylethene units.     

Aggregation-induced emission of tetraphenylethene derivative as a fluorescence method for probing the assembling/disassembling of amphiphilic molecules

The aggregation-induced emission (AIE) of a 1,2-diphenyl-1,2-di(p-tolyl)ethene (TPE) was explored as a novel fluorescence method for probing the assembling/disassembling of amphiphilic molecules. The fluorescence intensity was able to monitor the formation of micelles and determine the critical micelle concentration (CMC) of surfactants. The temperature-dependent micellization of the pharmaceutically important PEO-PPO-PEO copolymer, Pluronic F127, was further studied by using the TPE fluorescence spectrum intensity. Our results showed good agreement with those reported in the literature by using other methods. The special advantage of the AIE probe method was further explored to determine the assembling/disassembling process of the colored amphiphilic molecule, 1-[4-(3-phenylazophenoxy)butyl]triethylamine bromide (AzoC4), whose CMC value has not previously been described. Since the TPE fluorescence signal mainly comes from the aqueous phase, not from the inside of hydrophobic core, it provides a possible platform to study the CMC of those colored surfactants. Based on the novel fluorescence properties of TPE in the aggregated and dispersed states, one can conclude that the TPE method is a promising method for the determination of the CMC and critical micellization temperature (CMT), particularly having a special advantage to determine the assembling/disassembling process of colored amphiphilic molecules.     

Dinitriles Bearing AIE‐Active Moieties: Synthesis,E/Z Isomerization,and Fluorescence Properties

Dinitriles bearing aggregation‐induced emission (AIE)‐active moieties [tetraphenylethylene (TPE) or diphenylphenanthrene (DPP)] were prepared. Compounds 4 (TPE‐linked) and 8 (DPP‐linked) showed considerably redshifted emission resulting from their large Stokes shifts and also strong fluorescence in the aggregated and solid states. Pure E and Z stereoisomers of both dinitriles were easily separated, and their isomerization equilibria and fluorescence properties were investigated. In addition to their pronounced AIEE behavior, 4 and 8 also showed various reversible chromic responses to external stimuli, namely, solvato‐, piezo‐, vapo‐, and thermochromism, which make them potential candidates for smart materials.     

Polysiloxane‐Modified Tetraphenylethene: Synthesis,AIE Properties,and Sensor for Detecting Explosives

Polysiloxane‐modified tetraphenylethene (PTPESi) is successfully synthesized by attaching tetraphenylethene (TPE) units onto methylvinyldiethoxylsiloxane and subsequent polycondensation. Introducing polysiloxane into TPE has minimal effect on the photophysical properties and aggregation‐induced emission behavior of TPE. The highest occupied and lowest unoccupied molecular orbital (HOMO and LUMO) energy levels of PTPESi are located mainly on the tetraphenylethene moieties. The fluorescence intensity and the half width of the emission peak of PTPESi before and after annealing at 120 °C for 12 h are nearly the same, indicating high thermal stability and morphological stability. In addition, use of PTPESi film as a sensor toward the vapor‐phase detection of explosives is also studied and it displays quite high fluorescence quenching efficiency and good reversibility.

     

Host-guest complexes between an aromatic molecular tweezer and symmetric and unsymmetric dendrimers with a 4,4'-bipyridinium core

We have investigated the spectroscopic and electrochemical behavior of symmetric and unsymmetric first-, second-, and third-generation dendrimers comprising an electron-acceptor 4,4'-bipyridinium core (viologen type) and electron-donor 1,3-dimethyleneoxybenzene (Fréchet-type) dendrons. The quite strong fluorescence of the symmetrically and unsymmetrically disubstituted 1,3-dimethyleneoxybenzene units of the dendrons is completely quenched as a result of donor-acceptor interactions that are also evidenced by a low-energy tail in the absorption spectrum. In dichloromethane solution, the 4,4'-bipyridinium cores of the investigated dendrimers are hosted by a molecular tweezer comprising a naphthalene and four benzene components bridged by four methylene units. Host-guest formation causes the quenching of the tweezer fluorescence. The association constants, as measured from fluorescence and (1)H NMR titration plots, (i) are of the order of 10(4) M(-1), (ii) decrease on increasing dendrimer generation, and (iii) are slightly larger for the unsymmetric than for the symmetric dendrimer of the same generation. The analysis of the complexation-induced shifts of the temperature-dependent (1)H NMR signals of the host and guest protons confirms that the bipyridinium core is positioned inside the tweezer cavity and allows the conclusions that (i) shuttling of the tweezer from one to the other pyridinium ring is fast (DeltaG < 10 kcal/mol), (ii) in the case of the unsymmetric dendrimers, the less substituted pyridinium ring is preferentially complexed in apolar solvents, and (iii) complexation of the 4,4'-bipyridinium core proceeds by clipping for the symmetric dendrimers and by threading in the case of unsymmetric ones. Host-guest formation causes a displacement of the first reduction wave of the 4,4'-bipyridinium unit toward more negative potential values, whereas the second reduction wave is unaffected. These results show that the host-guest complexes between the tweezer and the dendrimers are stabilized by electron donor-acceptor interactions and can be reversibly assembled/disassembled by electrochemical stimulation.     

Strategy for the Construction of Diverse Poly-NHC-Derived Assemblies and Their Photoinduced Transformations

A series of supramolecular assemblies of types [Ag₈( L )₄](PF₆)₈ and [Ag₄( L )₂](PF₆)₄, obtained from the tetraphenylethylene (TPE) bridged tetrakis(1,2,4-triazolium) salts H₄-L(PF₆)₄ and Ag^I ions, is described. The assembly type obtained dependends on the N-wingtip substituents of H₄-L(PF₆)₄. Changes in the lengths of the N4-wingtip substituents enables controlled formation of assemblies with either [Ag₄( L )₂](PF₆)₄ or [Ag₈( L )₄](PF₆)₈ stoichiometry. The molecular structures of selected [Ag₈( L )₄](PF₆)₈ and [Ag₄( L )₂](PF₆)₄ assemblies were determined by X-ray diffraction analyses. While H₄- L (PF₆)₄ does not exhibit fluorescence in solution, their tetra-NHC (NHC=N-heterocyclic carbene) assemblies do upon NHC–metal coordination. Upon irradiation, all assemblies undergo a light-induced, supramolecule-to-supramolecule structural transformation by an oxidative photocyclization involving phenyl groups of the TPE core, resulting in a significant change of the luminescence properties.     

Constructing a Novel Dendron for a Self‐Host Blue Emitter with Thermally Activated Delayed Fluorescence: Solution‐Processed Nondoped Organic Light‐Emitting Diodes with Bipolar Charge Transfer and Stable Color Purity

Self‐host thermally activated delayed fluorescence (TADF) materials have recently been identified as effective emitters for solution‐processed nondoped organic light‐emitting diodes (OLEDs). However, except for the carbazole unit, few novel dendrons have been developed to build self‐host TADF emitters. This study reports two self‐host blue materials, tbCz‐SO and poCz‐SO, with the same TADF emissive core and different dendrons. The influence of the peripheral dendrons on the photophysical properties and electroluminescent performances of the self‐host materials were systematically investigated. The transient fluorescence and electroluminescence spectra indicated that the diphenylphosphoryl carbazole units could effectively encapsulate the emissive core to reduce the concentration quenching effect and to enhance reverse intersystem crossing. By using tbCz‐SO and poCz‐SO as host‐free blue emitters, the performance of the solution‐processed nondoped OLED device demonstrated that a more balanced charge transfer from the bipolar dendrons would offer a better current efficiency of 10.5 cd A⁻¹ and stable color purity with Commission Internationale de L'Eclairage units of (0.18, 0.27).     

Linked Rotaxane Structure Restricts Local Molecular Motions in Solution to Enhance Fluorescence Properties of Tetraphenylethylene

The restriction of local molecular motions is critical for improving the fluorescence quantum yields (FQYs) and the photostability of fluorescent dyes. Herein, we report a supramolecular approach to enhance the performance of fluorescent dyes by incorporating a linked rotaxane structure with permethylated α-cyclodextrins. Tetraphenylethylene (TPE) derivatives generally exhibit low FQYs in solution due to the molecular motions in the excited state. We show that TPE with linked rotaxane structures on two sides displays up to 15-fold higher FQYs. Detailed investigations with variable temperature ¹H NMR, UV-Vis, and photoluminescence spectroscopy revealed that the linked rotaxane structure rigidifies the TPE moiety and thus suppresses the local molecular motions and non-radiative decay. Moreover, the linked rotaxane structure enhances the FQY of the dye in various solvents, including aqueous solutions, and improves the photostability through the inhibition of local molecular motions in the excited TPE.     

Convergent synthesis of platinum-acetylide dendrimers

An efficient convergent route to the main chain type of organometallic dendrimers, in which platinum moieties are linked by 1,3,5-triethynylbenzene, has been developed. The synthesis of platinum-acetylide dendrons involved the use of two types of trialkylsilyl groups for protection of the terminal acetylene. The platinum-acetylide dendrimers were prepared up to the third generation by reacting dendrons with a triplatinum core and a tetraplatinum core. Spectroscopic characterization and trace experiments by gel permeation chromatography indicated that the dendrimer molecules have no structural defects. Although a pi-conjugated system was used as the bridging ligand, electronic and fluorescence spectra suggested that the interaction among the platinum-acetylide moieties in the dendrimers was small.     

Intramolecular Axial Ligation of Zinc Porphyrin Cores with Triazole Links within Dendrimers

Stable ligation : A series of dendritic porphyrins, such as that depicted in which benzyl ether dendrons were linked to a porphyrin core through 1,2,3‐triazole links, was synthesized. Absorption and fluorescence spectra showed a stable axial ligation at the zinc center of the porphyrin core by triazole links in dendritic wedges and indicated that the position of the triazole links strongly affected the stability of the axial ligation within the dendrimer.

     

Catalytic Dendrophanes as Enzyme Mimics: Synthesis,Binding Properties,Micropolarity Effect,and Catalytic Activity of Dendritic Thiazolio-cyclophanes

Catalytic dendrophanes 9 and 10 were prepared as functional mimics of the thiamine-diphosphate-dependent enzyme pyruvate oxidase, and studied as catalysts in the oxidation of naphthalene-2-carbaldehyde ( 4 ) to methyl naphthalene-2-carboxylate ( 8 ) (Scheme 1). They are composed of a thiazolio-cyclophane initiator core with four generation 2 (G-2) poly(etheramide) dendrons attached. The two dendrophanes were synthesized by a convergent growth strategy by coupling dendrons 11 and 12 , respectively (Scheme 2) with (chloromethyl)-cyclophane 42 (Scheme 5) and subsequent conversion with 4-methylthiazole (Scheme 7). The X-ray crystal structures of cyclophane precursors 30 (Scheme 3), 37 , and 38 (Scheme 5) on the way to dendrophanes were determined (Fig. 1). The crystal-structure analysis of the benzene clathrate of 37 revealed the formation of channel-like stacks by the cyclophane which incorporate its morpholinomethyl side chain and the enclathrated benzene molecule (Fig. 2). The interactions of the enclathrated benzene molecule with the phenyl rings of the two adjacent cyclophane molecules in the stack closely resemble those between neighboring benzene molecules in crystalline benzene (Fig. 3). The characterization by MALDI-TOF-MS (Fig. 4), and ¹H- and ¹³C-NMR spectroscopy (Fig. 5) proved the monodispersity of the G-2 dendrophanes 9 and 10 with molecular weights up to 11500 Da (for 10 ). ¹H-NMR and fluorescence binding titrations in H₂O and aqueous MeOH showed that 9 and 10 form stable 1 : 1 complexes with naphthalene-2-carbaldehyde ( 4 ) and 6-(p-toluidino)naphthalene-2-sulfonate ( 48 , TNS) (Tables 1 and 2). The evaluation of the fluorescence emission maxima of bound TNS revealed that the dendritic branching creates a microenvironment of distinctly reduced polarity at the cyclophane core by limiting its exposure to bulk solvent. Initial rate studies for the oxidation of naphthalene-2-carbaldehyde to methyl naphthalene-2-carboxylate in basic aqueous MeOH in the presence of flavin derivative 6 revealed only a weak catalytic activity of dendrophanes 9 and 10 (Table 3), despite the favorable micropolarity at the cyclophane active site. The low catalytic activity in the interior of the macromolecules was explained by steric hindrance of reaction transition states by the dendritic branches.     

A two-photon antenna for photochemical delivery of nitric oxide from a water-soluble, dye-derivatized iron nitrosyl complex using NIR light

The experiments described here demonstrate the use of two-photon excitation (TPE) to sensitize nitric oxide (NO) release from a dye-derivatized iron/sulfur/nitrosyl cluster Fe2(mu-RS)2(NO)4 (Fluor-RSE, RS = 2-thioethyl ester of fluorescein) with near-infrared (NIR) light in the form of femtosecond pulses from a Ti:sapphire laser. TPE at 800 nm leads both to weak fluorescence from the organic chromophore at lambda(max) = 532 nm and to NO labilization from the cluster. Since the emission from the reference compound Fluor-Et (the ethyl ester of fluorescein) under identical conditions (50/50 CH3CN/phosphate buffer (1 mM) at pH 7.4) is considerably more intense, the weaker emission from Fluor-RSE and the NO generation indicate that the fluorescein excited states initially formed by TPE are largely quenched by energy transfer to the cluster core. The two-photon absorption (TPA) cross section of Fluor-RSE at 800 nm was determined to be delta = 63 +/- 7 GM via the TPA photoluminescence technique. This can be compared to the TPA cross section of 36 GM reported for fluorescein dye in pH 11 aqueous solution and of 32 +/- 3 GM for Fluor-Et measured under conditions comparable to those used for Fluor-RSE. Pulse intensity dependence studies showed that the quantity of NO released from the latter as the result of NIR photoexcitation follows a quadratic relationship to excitation intensity, consistent with the expectation for a TPE process. These studies demonstrate the potential utility of a two-photon antenna for sensitization of the photochemical release of an active agent (in this case, NO) from a photoactive pro-drug.     

Monodentate AIEgen Anchored on Metal‐Organic Framework for Fast Fluorescence Sensing of Phosphate

Herein, a novel sensor (TPE‐UiO‐66) was designed via anchoring monodentate tetraphenylethylene (TPE) onto UiO‐66 framework. The combination of the distinct aggregation‐induced emission (AIE) of TPE and the easy replacement of monodentate linker by guest phosphate, makes TPE‐UiO‐66 an ideal platform for sensing HPO₄^2–. Experimental results indicate that TPE‐UiO‐66 can selectively sense HPO₄^2– from other common anions. The limit of detection (LOD) can reach to 5.56 μmol·L^–1 and more importantly, TPE‐UiO‐66 also exhibits an ultra‐fast equilibrium response of 2 min, far faster than those of other sensors especially for UiO‐66‐NH₂. The combination of experimental analysis and density functional theory (DFT) calculations demonstrates that the high selectivity, high sensitivity and fast response of HPO₄^2– detection by TPE‐UiO‐66 can be attributed to the stronger coordination interactions of HPO₄^2– with Zr‐O cluster of UiO‐66 than that of TPE molecule. This study not only provides a potential probe for phosphate, but also represents a novel strategy to design stimuli‐responsive fluorescent MOF‐based sensors via using monodentate AIEgens.     

Study of Reactivity of a Chain-Bound Molecular Moiety by Intermolecular Exciplex Formation

The effect of chain-binding on the reactivity of naphthyl groups towards intermolecular exciplex formation with triethylamine has been investigated. Polyamides of 2,6-bis(N-methyl methyl-amino)naphthalene with the diacid chlorides ClOC(CH₂)_x COCl (x = 2, 4, 6, and 8), designated P-2, P-4, P-6 and P-8, and 2,5-bis(n-methyl N-acetyl methylamino)naphthalene (MC) have been studied. Fluorescence spectra of dilute solutions of the poly-amides and their model compound have been obtained in the presence of varying amounts of triethylamine (TEA) as a quencher. The variations of exciplex monomer fluorescence intensity ratio, I_E/I_M, with quencher concentration indicates the following reactivity order: MC > P-8 > P-6 ± P-4 > P-2, which reflects the relative diffusion rate and accessibility of the naphthalene moiety. This order also represents the relative chain flexibilities of the polyamides studied. Monomer fluorescence quenching is explained in terms of a scheme involving formation of an exciplex, and a nonfluorescent CT encounter complex. Stern-Volmer plots of monomer fluorescence quenching reveal an anomalous order where the monomer fluorescence of the model compound is less effectively quenched. This may imply a slower dissociation rate constant of the nonfluorescent encounter complex in the case of the polymers.     

Convergent synthesis of internally branched PAMAM dendrimers

[reaction: see text] A series of aliphatic internally branched poly(amido amine) dendrons and dendrimers has been synthesized. The internal branching unit was 1,2-propanediamine and a series of PAMAM-type dendrons of the types AB2, AB4, and AB8 were built. These were anchored on a core molecule containing four carboxylic acid moieties and the 1,2-propanediamine unit resulted in PAMAM dendrimers with 4, 8, 16, and 32 end groups.     

Dendritic cavitands: preparation and electrochemical properties

A new series of dendrimers containing a central cavitand core with four appended Fréchet-type dendrons, linked to the core through 4,4'-bipyridinium (viologen) subunits, have been synthesized, characterized and their electrochemical properties investigated using cyclic voltammetric measurements.