Effect of exogenous softwood on thermal decomposition of reconstituted tobacco sheet

In recent years, reconstituted tobacco sheet (RTS) has played an increasingly vital role in reducing tumorigenicity for tobacco industry. In this paper, two plant fibers of tobacco pulp (TP) and softwood pulp (SP) were added independently as strengthening agents during the paper-making process to manufacture RTS (TP-RTS and SP-RTS). The effects of exogenous SP on the CO yield in cigarette mainstream smoke, thermal behavior, and gaseous products evolution properties of RTS were evaluated and compared with TP. The CO yield in cigarette mainstream smoke was studied using smoking machine and CO analyzer. The thermal behavior of two RTS was studied by thermogravimetric (TG) analysis, and the gaseous products were investigated by Fourier transform infrared spectrometer (FTIR). CO yield in cigarette mainstream smoke results demonstrated that SP-RTS (3.16 mg per puff) presented higher CO yield per puff than TP-RTS (2.83 mg per puff). TG analysis results demonstrated that the maximum mass loss rate of SP-RTS (23.3 % min^?1) was drastically higher than that of TP-RTS (15.8 % min^?1). FTIR results illustrated that SP-RTS presented stronger absorbance intensity associated with generation of more gaseous products than TP-RTS. In the thermal decomposition stage, the maximum mass loss rate of SP (78.6 % min^?1) was clearly higher than that of TP (38.4 % min^?1), and SP increased the generation of gaseous products compared to TP.     

Effects of common ammonium salt on the thermal behavior of reconstituted tobacco sheet

Understanding the role of chemical burn additives on modifying the toxic gaseous constituents and thermal behavior of reconstituted tobacco sheet (RTS) has recently taken center stage through a number of initiatives. In this current study, the effects of ammonium chloride (AC), ammonium sulfate, diammonium phosphate, and monoammonium phosphate on the formation of evolved gaseous products, specifically carbonyl compounds and thermal behavior were investigated. Results on cigarette smoking tests revealed that ammonium salt was a potential burn additive to reduce carbonyl compounds delivery in the cigarette mainstream smoke of RTS. The yield per puff of carbonyl compounds of pure RTS was decreased from 247.8 µg to 133.30 µg with the incorporation of AC. Thermogravimetric analysis (TG) and differential scanning calorimetry (DSC) were used to investigate the thermal decomposition of RTS. TG results revealed that the incorporation of ammonium salt into RTS could improve the thermal stability of RTS. The DSC results showed that the maximum exothermic peak was drastically decreased with the addition of ammonium salt, for example, from 14.8 mW mg^?1 of pure RTS to 10.27 mW mg^?1 of AC-RTS. Results on Fourier transform infrared spectrometer (FTIR) which was employed to investigate the generation of evolved volatile products showed that these four ammonium salts as burn additives were efficiently high enough to decrease the formation of gaseous products. From our findings, compared with the virgin RTS and other three modified RTS, AC-RTS could significantly decrease the yields of nicotine and phenolic compounds in the cigarette mainstream smoke of RTS.     

Kinetic analysis of co-pyrolysis of cellulose and polypropylene

The present research work focuses on understanding the kinetics and mechanism of co-pyrolysis of cellulose, a major constituent of biomass, and polypropylene (PP) that is abundantly present in waste plastics. Co-pyrolysis of cellulose and PP of different compositions, viz., 100:0, 80:20, 60:40, 40:60, 20:80, and 0:100 (mass%/mass%), was carried out in a thermogravimetric analyzer at various heating rates from 5 to 180 K min^?1. The kinetics of slow to medium heating rate pyrolysis was analyzed using first Kissinger and Kissinger–Akahira–Sunose techniques. Cellulose and PP decomposition occurred in two distinct temperature regimes, viz., 575–650 and 675–775 K, respectively. However, apparent activation energies of thermal decomposition of the mixtures clearly indicated the presence of interaction between cellulose and PP. The presence of cellulose in the mixture decreased the apparent activation energy of PP decomposition from 210 to 120 kJ mol^?1, while the presence of PP did not affect the apparent activation energy of cellulose decomposition (E _a = 158 ± 3 kJ mol^?1). A significant decrease in apparent activation energy was observed in the conversion regime corresponding to the completion of cellulose pyrolysis and beginning of PP pyrolysis. Differential scanning calorimetry data clearly showed the shift of exothermic char formation to higher temperatures with PP incorporation in the mixture. The presence of PP also resulted in reduction of final char content. Based on the above analyses, a new interaction step that involves a bimolecular reaction of activated PP with volatiles from cellulose pyrolysis to form interaction products and char is proposed, and the rate limiting steps for char formation are clearly identified.     

Hermetic thermal behaviors and specific heat capacities of bis(aminofurazano)furazan and bis(nitrofurazano)furazan

Thermal behaviors of bis(aminofurazano)furazan (BAFF) and bis(nitrofurazano)furazan (BNFF) were studied by the differential scanning calorimetry (DSC) method with a special hermetic high-pressure crucible and compared to that with a common standard Al crucible. The exothermic decomposition processes of the two compounds were completely revealed. The extrapolated onset temperature, peak temperature and enthalpy of exothermic decomposition at the heating rate of 10 °C min^?1 are 290.2, 313.4 °C and ??2174 J g^?1 for BAFF, and 265.8, 305.0 °C and ??2351 J g^?1 for BNFF, respectively. The apparent activation energies of the decomposition process for the two compounds are 115.7 and 131.7 kJ mol^?1, respectively. The self-accelerating decomposition temperatures and critical temperatures of thermal explosion are 247.5 and 368.7 °C for BAFF, and 249.6 and 268.1 °C for BAFF, respectively. Both BAFF and BNFF present high thermal stability. The specific heat capacities for the two compounds were determined with the micro-DSC method, and the specific heat capacities and molar heat capacities at 298.15 K are 1.0921 J g^?1 K^?1 and 257.9 J mol^?1 K^?1 for BAFF, and 1.0419 J g^?1 K^?1 and 308.5 J mol^?1 K^?1 for BNFF, respectively.     

Effects of melamine phosphate on the thermal decomposition and combustion behavior of reconstituted tobacco sheet

In this paper, first the MP-modified reconstituted tobacco sheet (RTS) was prepared by a paper-making process. Thermogravimetric analysis coupled to Fourier transform infrared spectrometer (TG-FTIR) had been used to investigate the influences of melamine phosphate (MP) on the thermal decomposition and the formation of evolved volatile products of RTS. TG-FTIR results illustrated that the incorporation of MP into RTS could retard the thermal decomposition of the major components of RTS and meanwhile lead to the formation of more thermally stable char. Moreover, the main gases released during the pyrolysis of RTS and MP-modified RTS were H₂O, CO₂, CO, NH₃, carbonyl compounds, alcohols, phenols, alkanes, and alkenes. The presence of MP changed the formation of evolved volatile products of RTS obviously. The effects of MP on the combustion behavior of RTS were studied by micro-scale combustion calorimetry and cone calorimetry. Results demonstrated that the formation of combustible gases was mainly determined by the thermal decomposition stage occurred in the temperature range of 150–600 °C. The incorporation of MP into RTS influenced the release of fuel gases and the char formation in the process of the thermal decomposition of RTS, and eventually retarded the flammability and combustibility of RTS.     

Study on the effect of potassium lactate additive on the combustion behavior and mainstream smoke of cigarettes

The influence of potassium lactate (PL) on the combustion behavior and semi-volatile compounds of tobacco during smoking is investigated in this study. The addition of PL showed no effect on the content of total particulate matter, nicotine-free dry particulate matter, puff number, and nicotine. Meanwhile, a 22.5 % increase in moisture content and 3 % decrease in CO content of mainstream smoke were observed when the added amount of PL was up to 2 %. The differential thermogravimetric curves indicated that PL decreased the maximum combustion rate and influenced the thermal degradation stage of tobacco by shifting the peak point of temperature to a higher value. The gas evolution profiles obtained from Fourier transform infrared spectroscopy during combustion showed that PL could lower the CO and CO₂ yield, but did not affect the generation of CH₄ and carbonyl compounds. A great variation in semi-volatile components of the mainstream smoke was also observed from the tobacco containing PL compared with the control. The comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry analysis showed that PL increased the yield of alcohols, lactons, miscellaneous oxygenated compounds and amides, but decreased that of aldehydes, acids, pyrroles and pyrazines. A small added amount (0.2 %) of PL reduced the content of total semi-volatile substances, ketones, esters, phenols, hydrocarbons, pyridines, tobacco alkaloids, and nitrogenous compound. However, the contents of these substances were not affected when the added amount was >0.2 %. PL bound the ash during combustion, thereby leading to the change of combustion behavior and certain smoke components.     

Influence of some lime-containing additives on the thermal behavior of urea

Urea is one of the main nitrogen fertilizers used in agriculture. But being well soluble in water, hardly 50% of its nitrogen is assimilated by plants. One possibility to eliminate this disadvantage is to use coating agents for modification of urea to obtain a controlled-realized fertilizer. The aim of this research was to study the influence of different lime-containing additives on the thermal behavior and decomposition kinetics of urea in oxidizing atmosphere. Commercial fertilizer-grade urea (46.4% N) and analytical-grade CaO, MgO, CaCO₃, MgCO₃ were used in the experiments. In addition, one Estonian limestone and one dolomite sample were used as additive or coating material. The experiments with a Setaram Setsys 1750 thermoanalyzer coupled to a Nicolet 380 FTIR Spectrometer by a heated transfer line were carried out under non-isothermal conditions up to 900 °C at the heating rate of 5 °C min^?1 and to calculate kinetic parameters, additionally, at 1, 2, and 10 °C min^?1 in the atmosphere containing 80% of Ar and 20% of O₂. The differential isoconversional method of Friedman was used to calculate the kinetic parameters. The results obtained indicate that thermooxidative decomposition of urea as well as the blends of urea with lime-containing materials and urea prills coated with limestone or dolomite powder follows a complex reaction mechanism.     

Thermal compatibility between hydroquinone and retinoic acid in pharmaceutical formulations

Thermogravimetry (TG) and differential scanning calorimetry (DSC) are used in pharmaceutical studies for characterization of drugs, purity, compatibility of formulations, identification of polymorphism, evaluation of stability, and thermal decomposition of drugs and pharmaceutical formulations. Hydroquinone (HQ) and products containing HQ have been widely used as depigmentation agents for lightening the skin. Retinoids are compounds that have the basic core structure of vitamin A and its oxidized metabolites, or synthetic compounds that share similar mechanisms of action as naturally occurring retinoids. Depigmentants and excipients were analyzed by TG and DSC. The dynamic thermogravimetric curves were obtained on a SHIMADZU thermobalance, model DTG-60, using an alumina crucible, at the heating rate of 10 °C min^?1, in the temperature range of 25–900 °C, under an atmosphere of nitrogen at 50 mL min^?1. The sample's mass was 10 ± 0.05 mg. The DSC curves were obtained using Shimadzu calorimeter, model DSC-60, using aluminum crucible, at the heating rate of 10 °C min^?1, in the temperature range of 25–400 °C. The thermogravimetric and calorimetric curves were analyzed using TASYS software SHIMADZU. In this study were found the interaction between retinoic acid (RA) and the following excipients: cetyl alcohol(CA), cetostearyl alcohol (CTA), glycerin(GLY), and dipropylene glycol (DPG), and that between HQ and the excipient, DPG. Therefore, additional studies are necessary to evaluate final formulations. Thermal analysis is an effective and reliable technique that can be used in the control of raw materials and pharmaceutical products, and for evaluating their employment potential in the development and characterization of products.     

Ag NPs decked GO composite as a competent and reusable catalyst for ‘ON WATER’ chemoselective synthesis of pyrano[2,3-c:6,5-c′]dipyrazol]-2-ones

We have synthesized and characterized Ag NPs decked GO composite and studied its role as reusable catalyst for the ‘ON WATER’ chemoselective synthesis of pyranodipyrazolones via the reaction of different carbonyl compounds with 3-methyl-1-phenyl-1H-pyrazol-5(4H)-one. This method illustrates significant selectivity for pyranodipyrazolones over arylmethylene bispyrazolols and arylmethylenepyrazolones. Synergistic effect of heterogenic nature of water with reactants and Ag NPs/GO had profuse outcome on reaction as indicated by high TOF (18.03 × 10^?5 mol g^?1 min^?1). Furthermore, catalyst was recycled for 7-times without significant loss of activity.     

Thermogravimetric analysis of walnut shell as pyrolysis feedstock

Thermal degradation behavior and kinetics of a biomass waste material, namely walnut shell, were investigated by using a thermogravimetric analyzer. The desired final temperature of 800 °C was achieved at three different heating rates (2, 10, and 15 °C min^?1) under nitrogen flow (50 mL min^?1). The TG and DTG curves exhibited three distinct zones that can mainly be attributed to removal of water, decomposition of hemicellulose + cellulose, and decomposition of lignin, respectively. The kinetic parameters (activation energy, pre-exponential factor, and reaction order) of active pyrolysis zone were determined by applying Arrhenius, Coats?CRedfern, and Horowitz?CMetzger methods to TG results. The values of activation energies were found to be between 45.6 and 78.4 kJ mol^?1. There was a great agreement between the results of Arrhenius and Coats?CRedfern methods while Horowitz?CMetzger method yielded relatively higher results. The existence of kinetic compensation effect was evident.     

Pyrolysis and combustion model of oil sands from non-isothermal thermogravimetric analysis data

Thermogravimetric (TG) data of oil sand obtained at Engineering Research Center of Oil Shale Comprehensive Utilization were studied to evaluate the kinetic parameters for Indonesian oil sand samples. Experiments were carried out at heating rates of 5, 15, and 25 °C min^?1 in nitrogen, 10, 20, and 50 °C min^?1 in oxygen atmosphere, respectively. The extent of char combustion was found out by relating TG data for pyrolysis and combustion with the ultimate analysis. Due to distinct behavior of oil shale during pyrolysis, TG curves were divided into three separate events: moisture release, devolatilization, and evolution of fixed carbon/char, where for each event, kinetic parameters, based on Arrhenius theory, were calculated. Coats–Redfern method, Flynn–Wall–Ozawa method, and distributed activation energy model method have been used to determine the activation energies of degradation. The methods are compared with regard to their characteristics and the ease of interpretation of the thermal kinetics. Activation energies of the samples were determined by three different methods and the results are discussed.     

GC–MS Analysis of Hydrogen Sulfide,Carbonyl Sulfide,Methanethiol, Carbon Disulfide,Methyl Thiocyanate and Methyl Disulfide in Mainstream Vapor Phase Cigarette Smoke

A method is described for the simultaneous analysis of hydrogen sulfide, carbonyl sulfide, methanethiol, carbon disulfide, methyl thiocyanate and methyl disulfide in mainstream vapor phase (MVP) cigarette smoke by gas chromatography–mass spectrometry. The fresh MVP smoke was collected in a gas bag, followed by injection of a 50 μL gas sample into the GC inlet via an automatic six-port valve. The separation was on a CP-PoraPLOT Q column and MS was operated in SIM mode. It was found that while carbonyl sulfide and carbon disulfide are very stable in the gas bag, hydrogen sulfide, methanethiol, methyl disulfide and methyl thiocyanate are extremely reactive and their levels increase or decrease drastically with the storage time in the gas bag. These results suggest that there is an absolute need to analyze the smoke sample as quickly as possible. Maintaining a precise time after the smoke collection is a key factor in order to obtain reproducible results. In this study, all the samples are injected within 2 min after MVP smoke was collected in the bag. Under smoke conditions of 60 mL puff of 2 s duration every 30 s, 12 brands of commercial cigarettes and Kentucky Reference 2R4F cigarettes were analyzed. Average values of three replicates of the 2R4F cigarettes were 31.6 μg cigt^?1 hydrogen sulfide, 40.7 μg cigt^?1 carbonyl sulfide, 25.6 μg cigt^?1 methanethiol, 2.2 μg cigt^?1 carbon disulfide, 23.7 μg cigt^?1 methyl thiocyanate and 17.6 μg cigt^?1 methyl disulfide. All other types of analyzed cigarettes show a similar quantitative distribution for these analytes.     

Thermal decomposition of tetraalkylammonium iodides

A number of tetramethylammonium (TMA) iodides, including mono-, tri-, and pentaiodide, were synthesized. Thermal decomposition of samples was investigated by simultaneous TG–DSC analysis accompanied by gaseous IR- and mass-spectrometry analyses. Two different reaction pathways have been observed for TMA pentaiodide at different heating rates. At low heating rates (1–5 K min^?1), a gradual mass loss takes place and a stability plateau due to monoiodide formation exists on TG curve. At high heating rates (10, 15 and 7 K min^?1 as the in-between stage), there are only two peaks on DTG curve (instead of three for lower heating rates) and no monoiodide formation is observed as the sample decomposes completely before 350 °C.     

Determination of adsorption heats of individual adsorption complex by combination of microcalorimetry and FTIR spectroscopy

Adsorption of CO as a probe molecule on K-FER zeolites differing in Si/Al ratio was investigated. Successful determination of adsorption heats of individual adsorption complexes formed upon adsorption of CO molecules on K-FER zeolites at 300 K by combination of IR spectroscopy with adsorption microcalorimetry is reported. Adsorption heat of bridged carbonyl complexes, where CO molecule interacts with two nearby extraframework K⁺ cations, was experimentally determined for the first time. It was found that bridged complexes on dual cationic sites exhibit adsorption heat of 34.8 kJ mol^?1, whereas monodentate carbonyls on single isolated K⁺ cation exhibit adsorption heat of only 26.2 kJ mol^?1 and adsorption heat of isocarbonyls was 21.5 kJ mol^?1.     

Gasification characteristics of coal char under CO2 atmosphere

The char gasification characteristics and the composition of evolved gases in a CO₂ environment have been studied using a thermogravimetric analyzer (TG) coupled with a mass spectrometer. Three types of coal char were studied: lignite (TXL), sub-bituminous (PRB), and bituminous (KYB). TG results showed that the reactivities of TXL and PRB were higher than that of KYB, and the reactivity of TXL was higher than that of PRB. The characterization of the chars implied that the mineral content in the char plays an important role in the reactivity and that the surface area and pore volume may accelerate the reactivity of chars. The evolved gases from three chars were mainly CO and SO₂. SO₂ was slightly delayed by CO during gasification of TXL and PRB chars, but for KYB, SO₂ and CO formed in the same temperature range, but at higher temperatures compared with TXL and PRB. The CO production of KYB was the best, 0.98 mg mg^?1; and SO₂ was the least, 0.031 mg mg^?1. PRB and TXL chars had similar CO production, but SO₂ in TXL was higher.     

Study of the Thermal Stability Properties of Pyridoxine Using Thermogravimetric Analysis

The thermal decomposition behavior and kinetics of pyridoxine in nitrogen-only and air atmospheres were studied using thermogravimetry analysis (TGA). Kinetic interpretation of thermal analysis data for pyridoxine decomposition was carried out using Ozawa and ASTM E698 isoconversional methods. The activation energy of the decomposition process varied with the degree of decomposition and was different in the nitrogen and air atmospheres. At a 5% decomposition level, the activation energy and the pre-exponential factor were found to be 28.3 kcal mol^?1 and 1.2 × 10¹⁴ min^?1, respectively, in the nitrogen-only atmosphere. Thermal stability was determined by calculating the time for 5% of the pyridoxine vitamer to decompose at 25°C. The calculated shelf life for the pyridoxine vitamer obtained via TGA was surprisingly smaller in nitrogen (0.9 years) than in air (1.5 years). This is speculated to be the result of a more complex decomposition mechanism in air, involving thermo-oxidative decomposition in the presence of oxygen.     

A comparative study of structure,thermal degradation,and combustion behavior of starch from different plant sources

The present study investigated the structure, degradation properties, and combustion behavior of starch from maize, sweet potato, lotus root, and tobacco. Compared with other plant starches, tobacco starch had the smallest size, the highest amylose content and the least crystallinity. Microscale combustion calorimetry (MCC) experiment demonstrated that sweet potato starch showed the maximum peak heat release rate value (888.0 W g^?1) while tobacco starch showed the minimum value (316.0 W g^?1) and thermogravimetric analysis coupled with Fourier transform infrared spectrometer (TG-FTIR) results showed tobacco starch had good char formability (residue mass: 15.6%) and released more incombustible gaseous products, such as H₂O and CO₂. These results suggest that the thermal properties of plant starches were mainly influenced by the structural features and amylose content, especially the amylose ratio, and tobacco starch was very promising for application in green flame-retardant material.     

Gas Chromatographic Determination of Guanidino Compounds Using Hexafluoroacetylacetone and Ethyl Chloroformate as Derivatizing Reagents

Guanidino compounds guanidine, methylguanidine, guanidinoacetic acid, guanidinobutyric acid, guanidinopropionic acid, and guanidinosuccinic acid after derivatization with hexafluoroacetylacetone and ethyl chloroformate at pH 9 in aqueous phase, eluted, and separated from gas chromatographic column HP-5 (30 m × 0.32 mm id) with film thickness of 0.25 μm at an initial column temperature 90 °C for 2 min, followed by heating rate of 10 °C min^?1 up to 220 °C with nitrogen flow rate of 1 mL min^?1. The detection was by flame ionization detector. The linear calibration ranges of each of guanidino compounds were obtained within 1–10 μg mL^?1, and the limit of detection was within 0.014–0.19 μg mL^?1. The derivatization and gas chromatography elution and separation were repeatable in terms of retention time and peak height/peak area with relative standard deviation (RSD) (n = 4) within 1.7–2.9 % and 1.4–2.8 %, respectively. The method was applied for the determination of guanidino compounds from deproteinized serum of uremic patients and healthy volunteers, and was found in the range below the limit of quantitation (BLOQ) to 1.25 μg mL^?1 with RSD within 1.4–3.6 %, and BLOQ to 0.4 μg mL^?1 with RSD 1.3–3.4 %, respectively. A number of pharmaceutical additives did not effect the determination with RSD within ±3.1 %.     

Kinetic mechanism of the thermal decomposition of tobacco

Equations have been derived to describe the chemical kinetic factors that affect the rate of formation of products when a mixture of solid components (tobacco) decomposes on heating. Using these equations, a computer model of tobacco pyrolysis has been constructed which can calculate the gas formation rate/temperature profile from a given set of reaction parameters. By comparing the predictions of the model with experimental results at heating rates between 0.8 and 25 deg C s^?1, a generalised kinetic mechanism for the thermal decomposition of tobacco has been developed. For carbon monoxide and other low molecular weight gases, the mechanism is an independent formation of each gas from one solid tobacco component in each temperature region. Pyrolysis of some individual tobacco components in other studies suggests that each gas is actually produced from many components in each temperature region. This more complex mechanism is kinetically equivalent to the deduced mechanism of independent formation from one component.The region in which a given decomposition reaction takes place moves to higher temperatures as the heating rate increases. The amounts of gases formed over any temperature region from 200 to 900°C can be calculated for a given heating rate using the mechanism and the kinetic constants. The present results imply that 75–90% of the carbon monoxide produced by tobacco decomposition at temperatures up to 900°C during a puff on a cigarette corresponds to that formed in the “low temperature region” (200–450°C) defined for pyrolysis experiments at the lower heating rates of 1–10 deg C s^?1.     

Catalytic Square-Wave Voltammetric Determination of Acrylamide in Potato Chips

Abstract

Square-wave voltammetry is a fast technique used for determination of trace amounts of acrylamide. When cobalt(II) ions were added to the acrylamide solution, a catalytic peak at about ?1.35 V vs. Ag/AgCl was observed, which was proportional to acrylamide concentration. The calibration curve showed good linearity in the range of 200–800 ng mL^?1 of acrylamide with a regression coefficient of 0.9989. The limit of detection of the method was 3.52 ng mL^?1, and the relative standard deviations for concentrations of 300 ng mL^?1 and 700 ng mL^?1 were 99.8% × 10^?2 and 79.7% × 10^?2, respectively.