Spectroscopic studies of sodium nitrate plasma produced by nanosecond laser ablation

We present the optical emission characteristics of the sodium plasma produced at the surface of sodium nitrate (NaNO₃) also known as Chile saltpeter. We used a Q-switched Nd:YAG (Quantel Brilliant) pulsed laser having a pulse duration of 5?ns and 10?Hz repetition rate which is capable of delivering 400?mJ at 1064?nm and 200?mJ at 532?nm. The target material was placed in front of laser beam in air (atmospheric pressure). The experimentally observed line profiles of neutral sodium have been used to extract the electron temperature using the Boltzmann plot method, whereas the electron number density has been determined from the Stark broadening. The electron temperature is calculated by varying the distance from the target surface along the line of propagation of the plasma plume and also by varying the laser irradiance. Besides, we have studied the variation of number density as a function of laser irradiance as well as its variation with the distance from the target surface. It is observed that electron temperature and electron number density increase as the laser irradiance is increased.     

Optical spectroscopic studies of titanium plasma produced by an Nd : YAG laser

We present optical emission characteristics of the titanium plasma produced by the fundamental (1064 nm) and second (532 nm) harmonics of a Q-switched Nd: YAG laser using laser induced breakdown spectroscopy (LIBS). The experimentally observed line profiles of neutral titanium (Ti I) have been used to extract the electron temperature (T _e ) using the Boltzmann plot method. The electron number density (N _e ) is calculated using the Stark broadening profile of 368.73 nm spectral line. Beside we have studied the spatial variation of electron temperature and number density as a function of laser energy for titanium plasma by placing the target material in air (at atmospheric pressure). We have determined the electron temperature and the electron number density along the axial position of the plasma plume.     

Laser-based optical emission studies of barium plasma

We present the optical emission characteristics of the barium plasma produced at the surface of barium hydroxide Ba(OH)₂, also known as baryta, generated by the first harmonic (1,064 nm) of a Q-switched Nd:YAG laser. The laser beam was focused on target material by placing it in air at atmospheric pressure. The experimentally observed line profiles of neutral barium have been used to extract the electron temperature using the Boltzmann plot method, whereas the electron number density has been determined from the Stark broadening. The electron temperature is calculated by varying distance from the target surface along the line of propagation of plasma plume and also by varying the laser energy. Besides, we have studied the variation of number density as a function of laser energy as well as its variation with distance from the target surface. It is observed that electron temperature and electron number density increase as laser energy increases.     

Diagnostics of Tin Plasma Produced by Visible and IR Nanosecond Laser Ablation

We present the optical emission spectroscopic studies of the Tin (Sn) plasma, produced by the fundamental (1064 nm) and second (532 nm) harmonics of a Q switched Nd: YAG pulsed laser having pulse duration of 5 ns and 10 Hz repetition rate which is capable of delivering 400 mJ at 1064 nm, and 200 mJ at 532 nm using Laser Induced Breakdown Spectroscopy (LIBS). The laser beam was focused on target material by placing it in air at atmospheric pressure. The experimentally observed line profiles of four neutral tin (Sn I) lines at 231.72, 248.34, 257.15 and 266.12 nm were used to extract the electron temperature (T_e) using the Boltzmann plot method and determined its value 6360 and 5970 K respectively for fundamental and second harmonics of the laser. Whereas, the electron number density (N_e) has been determined from the Stark broadening profile of neutral tin (Sn I) line at 286.33 nm and determined its value 5.85 x 10¹⁶ and 6.80 x 10¹⁶cm^–3 for fundamental and second harmonics of the laser respectively. Both plasma parameters (T_e and N_e) have also been calculated by varying distance from the target surface along the line of propagation of plasma plume and also by varying the laser irradiance. (© 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Spectroscopic Studies of Indium Plasma Produced by Fundamental (1,064 nm) and Second (532 nm) Harmonics of an Nd:YAG Laser

In this paper, we present spectroscopic studies of a laser-induced indium (In) plasma produced by fundamental (1,064 nm) and second (532 nm) harmonics of an Nd:YAG laser along with the characteristics determined by plasma parameters. The electron temperature is determined using four lines of neutral indium at 260.17, 271.02, 275.38, and 325.85 nm, in view of the Boltzmann plot method. The temperature varies from 6,470 K at 0.05 nm to 4,990 K at about 2 mm from the target surface for the fundamental wavelength and from 6,250 to 4,880 K for the second harmonic. The electron density is ±300 calculated using the Stark broadened profiles recorded at laser pulse energy 130 mJ (for fundamental) and 72 mJ (for second harmonic) as 5:8·10¹⁶ and 6:9·10¹⁶ cm^?3, respectively. These values decrease to 3:5·10¹⁵ and 4:9·10¹⁵ over a distance of 2 mm from the target surface, respectively. Moreover, we study the variation of N _e as a function of laser irradiance as well as its spatial variation from the target surface.     

Plasma dynamics from laser ablated solid lithium

Emission plasma plume generated by pulsed laser ablation of a lithium solid target by a ruby laser (694 nm, 20 ns, 3 J) was subjected to optical emission spectroscopy: time and space resolved optical emission was characterised as a function of distance from the target surface. Propagation of the plume was studied through ambient background of argon gas. Spectroscopic observations can, in general, be used to analyse plume structure with respect to an appropriate theoretical plasma model. The plume expansion dynamics in this case could be explained through a shock wave propagation model wherein, the experimental observations made were seen to fit well with the theoretical predictions. Spectral information derived from measurement of peak intensity and line width determined the parameters, electron temperature (T _e) and electron number density (n _e), typically used to characterise laser produced plasma plume emission. These measurements were also used to validate the assumptions underlying the local thermodynamic equilibrium (LTE) model, invoked for the high density laser plasma under study. Some interesting results pertaining to the analysis of plume structure and spatio-temporal behaviour of T _e and n _e along the plume length will be presented and discussed.     

Effect of ambient conditions on laser-induced breakdown spectra

The role of different ambient conditions on LIBS signal intensity was investigated for better understanding and performance of LIBS as a quantitative and qualitative analytical technique. For this purpose, the relative LIBS signal intensities were measured for a standard Cr line (520.8 nm) at different gas pressures of Ar, He, and air. The plasma was generated using a Q-switched pulsed Nd:YAG laser having wavelength of 1064 nm and pulse duration of 8 ns. The analysis revealed that the intensities of the spectral atomic Cr line (520.8 nm) were strongly enhanced under the argon environment in 10?C40 mbar range. The electron excitation temperature (T _e ) and number density (n _e ) were estimated by using a Boltzmann plot and a Stark broadening profile, respectively. For optimum dependence of LIBS, laser energy and pressure dependence was also studied. The electron temperature and number density showed an increase with increase in ambient gas pressure.     

Emission properties of laser ablation of SnO2: Sb transparent conducting film and KTiOPO4 crystal

Optical emission spectra of Nd:YAG laser ablation of KTiOPO₄ (KTP) crystal and SnO₂:Sb transparent conducting thin film were recorded and analyzed in vacuum and in air. The integral intensities of spectral lines from laser-ablated KTP crystal were obtained as functions of distance from the target surface and laser power density in vacuum and in air. The ambient gas effects on pulsed laser ablation of target were discussed. We also performed laser ablation of SnO₂:Sb transparent conducting thin film in air and the electron temperature and full-width at half-maximum (FWHM) of atomic and ionic spectral lines in the plasma were quantified using Boltzmann plot method and Lorentzian fit, respectively. Integral intensities of atomic and ionic Sn spectral lines were also obtained as functions of distance from the target surface and laser irradiance. The intensity ratio of ionic and atomic Sn spectral lines as a function of laser power density was got which gives some information about the variation of ionization ratio with laser irradiance in the plasma produced by high-power laser.     

Optical Emission Studies of Molybdenum Plasma Produced by an Nd:yag Laser

We study the optical emission characteristics of a molybdenum (Mo) plasma produced at the surface of a target material in air at atmospheric pressure using the fundamental (1,064 nm) wavelength of an Nd: YAG laser. We estimate the temperature using the Boltzmann plot method, whereas the number density is calculated using the Stark broadening profile of the neutral iron (Fe I) transition line at 538.34 nm. We investigate variations in the temperature and number density at different laser irradiance as well as the distance from the target surface along the axial direction of plasma propagation using the spectroscopic technique. We observe that the temperature and number density increase with increase in the laser irradiance.     

Optical emission spectroscopic studies on laser ablated TiO2 plasma

Optical emission spectroscopic investigations of the plasma produced during Nd:YAG laser ablation of sintered TiO₂ targets, in oxygen and argon gas environments are reported. The spatial variations of electron temperature (T_e) and electron number density (N_e) are studied. The effect of oxygen/argon pressure on electron temperature (T_e) and electron number density (N_e) is presented. The kinematics of the emitted particles and expansion of plume edge are discussed. Spatio-temporal variations of various species in TiO₂ plasma were recorded and corresponding velocities were calculated. The effect of oxygen pressure on intensity of neutral/ion species and their corresponding velocities is also reported.     

Experimental transition probabilities for several spectral lines arising from the 5d 6s{8s, 7p, 5f, 5g} electronic configurations of Pb III

Transition probabilities for 30 spectral lines, arising from the 5d¹⁰ 6s{8s, 7p, 5f, 5g} electronic configurations of Pb III (20 measured for the first time), have been experimentally determined from measurements of emission line intensities in a plasma lead induced by ablation with a Nd:YAG laser. The line intensities were obtained with the target placed in molecular argon at 6 Torr, recorded at a 400 ns delay from the laser pulse, which provides appropriate measurement conditions, and analysed between 200 and 700 nm. They are measured when the plasma reaches local thermodynamic equilibrium (LTE). The plasma under study had an electron temperature (T) of 21,400 K and an electron number density (N_e) of 7×10¹⁶ cm⁻³. The influence of self-absorption has been estimated for every line, and plasma homogeneity has been checked. The values obtained were compared with previous experimental values and theoretical estimates where possible.     

Quantitative studies of copper plasma using laser induced breakdown spectroscopy

In the present work, we present the spatial evolution of the copper plasma produced by the fundamental harmonic (1064 nm) and second harmonic (532 nm) of a Q-switched Nd:YAG laser. The experimentally observed line profiles of neutral copper have been used to extract the electron temperature using the Boltzmann plot method, whereas, the electron number density has been determined from the Stark broadening. Besides we have studied the variation of electron temperature and electron number density as a function of laser energy at atmospheric pressure. The Cu I lines at 333.78, 406.26, 465.11 and 515.32 nm are used for the determination of electron temperature. The relative uncertainty in the determination of electron temperature is ≈10%. The electron temperature calculated for the fundamental harmonic (1064 nm) of Nd:YAG laser is 10500–15600 K, and that for the second harmonic (532 nm) of Nd:YAG laser is 11500–14700 K at a Q Switch delay of 40 μs. The electron temperature has also been calculated as a function of laser energy from the target surface for both modes of the laser. We have also studied the spatial behavior of the electron number density in the plume. The electron number densities close to the target surface (0.05 mm), in the case of fundamental harmonic (1064 nm) of Nd:YAG laser having pulse energy 135 mJ and second harmonic (532 nm) of Nd:YAG laser with pulse energy 80 mJ are 2.50×10¹⁶ and 2.60×10¹⁶ cm⁻³, respectively.     

The dimension of the core and the tail of the plasma produced by laser ablating SiC targets

Optical emission of the plasma generated on SiC samples by pulsed laser beam from an Nd:YAG laser was used to investigate the spatial evolution of the electron temperature (Te) and density (Ne) of the plasma. The range and the profile of the plasma were characterized by the electron temperature Te and the electron density Ne, as functions of the distance from the SiC surface. It was found that the characterized spatial distribution closely coincided with the spatial images of the plasma recorded by a digital camera. The results obtained from the two different experimental measurements are consistent with other data from the literature, obtained either by models or experiments. The present result may give the insight to the complex physical phenomena in the thin film preparations using the pulsed laser deposition (PLD).     

Diagnostics of a Potassium Plasma Produced by Visible and IR Nanosecond Laser Ablation

We present spectroscopic emission studies of a laser-produced potassium plasma generated by the fundamental mode (1064 nm) and the second harmonic (532 nm) of a Q-switched pulsed Nd:YAG laser. The spectra predominantly reveal the spectral lines of neutral potassium. We use experimentally observed line profiles of neutral potassium to determine the excitation temperature using Boltzmann plots, and the Stark-broadened line profiles to determine the electron-number density. We also study variations in the excitation temperature and electron-number density as functions of the laser irradiance.     

Spectroscopic studies of laser induced aluminum plasma using fundamental,second and third harmonics of a Nd:YAG laser

In the present work, we have studied the spatial evolution of the aluminum plasma produced by the fundamental (1064 nm), second (532 nm) and third (355 nm) harmonics of a Q-switched pulsed Nd:YAG laser. The experimentally observed line profiles of neutral aluminum have been used to extract the excitation temperature using Boltzmann plot method whereas the electron number density has been determined from the Stark broadened profiles. Besides we have studied the variation of excitation temperature and electron number density as a function of laser irradiance at atmospheric pressure. In addition, we have performed quantitative analysis of photon absorption and vapor ionization mechanism at three laser wavelengths and estimated the inverse bremsstrahlung (IB) absorption and photoionization (PI) coefficients. The validity of the assumption of local thermodynamic equilibrium is discussed in the light of the experimental results.     

Optical emission spectroscopy investigation of sputtering discharge used for SiOxNy thin films deposition and correlation with the film composition

The r.f. discharge of sputtering silicon target using argon-oxygen-nitrogen plasma was investigated by optical emission spectroscopy. Electronic temperature (T_e) and emission line intensity were measured for different plasma parameters: pressure (from 0.3 to 0.7 Pa), power density (0.6-5.7 W cm⁻²) and gas composition. At high oxygen concentration in the plasma, both T_e and the target self-bias voltage (V_b) steeply decrease. Such behaviour traduces the target poisoning phenomenon. In order to control the deposition process, emission line intensity of different species present in the plasma were compared to the ArI (λ = 696.54 nm) line intensity and then correlated to the film composition analysed by Rutherford Backscattering Spectroscopy.     

Spectral evolution of nano-second laser interaction with Ti target in nitrogen ambient gas

The present work aimed to study the variation in the plasma parameters (temperature and density) of the Ti plasma generated by 1,064 and 532 nm lasers at different ambient N₂ pressures for different delay times. The characterization of the plasma-assisted pulsed laser ablation of the titanium target is discussed. The emission spectra of the titanium plasma produced in the present study have been carefully investigated over the whole UV–NIR (200–1,000 nm) spectral range. Boltzmann plots of suitable spectral lines have been employed to derive the excitation temperature, and the electron density is derived from the Stark widths of the Ti II spectral line at 350.49 nm.     

Time evolution of the electron density and temperature in laser-produced plasmas from YBa2Cu3O7

2 Cu₃O₇ target in vacuum and the plasma thus generated was studied using time-resolved spectroscopic techniques. Line broadening of the Ba I emission line at 553.5 nm was monitored as a function of time elapsed after the incidence of a laser pulse on the target. Measured line profiles of barium species were used to infer the electron density and temperature, and the time evolution of these important plasma parameters has been worked out. Received: 23 April 1997/Revised version: 25 August 1997     

Electron impact ionization and excitation rate coefficients in the negative glow region of a glow discharge

Some easy to use reasonable approximations for electron impact rate coefficients have been considered. The most important rate coefficients for electron collisions in noble gases are electron-neutral ionization and electron impact excitation. Electron-neutral ionization besides electron impact excitation of some states of the argon and helium atom in direct current (dc) glow discharge plasma has been calculated. The plasma parameters of electron are significant factors for computing the rate coefficients. We present first results of probe diagnostic that includes the double probe measurements of the plasma parameters, namely, electron temperature (T_e) and electron density (n_e). Electron properties obtained from the double probe characteristic curves including T_e and n_e as well as the calculated rate coefficients (ionization and excitation) were studied as a function of the axial distance from the cathode while the discharge operating parameters of voltage and pressure were varied. Two regions of the glow discharge were investigated: cathode fall region and negative glow. Particular emphasis was placed on the negative glow region.     

Mode transition in magnetic pole enhanced inductively coupled argon plasmas

The electrical probe (Langmuir probe) diagnostics of different plasma parameters and operation regimes (E/H modes) of magnetic pole enhanced, inductively coupled (MaPE-ICP) argon plasmas are investigated. It is shown that uniform, high density (n _e ∼ 10¹² cm^-3) and low electron temperature (T _e ∼ 1.5 eV) plasma can be produced in low pressure argon discharges at a low power (100 W). It is found that an MaPE-ICP reactor operates in two different modes; capacitive (E mode) and inductive (H mode). No density jump or hysteresis are reported between these modes. The effect of pressure on transition power, where the mode changes from E to H mode at 20 sccm gas flow rate are studied and it is found that for all pressures tested (∼7.5 mTorr to 75 mTorr) the transition power remains same. In the inductive mode, the above plasma parameters show a smooth variation with increasing filling gas pressure at fixed power. The intensity of the emission line at 750.4 nm due to 2p ₁ → 1s ₂ (Paschen’s notation) transition, closely follows the variation of n _e with RF power and filling gas pressure. Measured electron energy probability function (EEPF) shows that electron occupation mostly changes in the high-energy tail, which enlightens close similarity of the 750.4 nm argon line to electron number density (n _e ). The behaviour of the electron energy probability function (EEPF) with regard to pressure and RF power in two operational modes is presented.