Benzo[f]isoindole derivatives from cycloaddition reaction of 2,4-dimethylpyrimido[2,1-a]isoindole and maleimides

In contrast to the previously reported results in the reaction of maleimides with pyrido[2,1-a]isoindole and 1,2-bis substituted isoindoles, the reaction between 2,4-dimethylpyrimido[2,1-a]isoindole and maleimides leads to the formation of unusual products. Their structure is assessed by NMR and mass spectrometry. An original reaction pathway is proposed. The high quantum yields observed in fluorescence opens the route to applications as biological probes. To cite this article: Z.V. Voitenko et al., C. R. Chimie 9 (2006).     

Substituted benzimidazo[2,1 -h]pteridine-2,4-diones

5-Alkyl-5,6-dihydrobenzimidazo[2,1 -h]pteridine-2,4(1H,3H)-diones (4 a–d) have been synthesised by the condensation of 2-(alkyl-aminomethyl)benzimidazole dihydrochloride (1 a–d) with 5-bromobarbituric acid (2). Similarly, 5-alkyl-5,6-dihydro-4 a-nitrobenzimidazo[2,1 -h] pteridine-2,4(3H,4aH)-diones (10 a–d) have also been synthesised by the condensation of1 a–d with 5-bromo-5-nitrobarbituric acid (8) followed by cyclisation of the intermediate 5-[(benzimidazol-2-ylmethyl)alkylamino]-5-nitrobarbituric acid (9 a–d) with 5% NaOH. Thermal cyclisation of the intermediates9 a–d have also been studied. Methylation of the compound10 a has been carried out with CH₃I and K₂CO₃ usingD M F as solvent to confirm cyclisation. The structures are supported by elemental analyses, IR and PMR spectra.

---

Substituierte Benzimidazo[2,1 -h]pteridin-2,4-dione

Zusammenfassung Die 5-Alkyl-5,6-dihydrobenzimidazo[2,1 -h]pteridin-2,4(1H,3H)-dione4 a-d wurden mittels Kondensation von 2-(Alkylaminomethyl)benzimidazolidhydrochloriden1 a–d mit 5-Brombarbitursäure (2) dargestellt. In ähnlicher Weise wurden die 5-Alkyl-5,6-dihydro-4a-nitrobenzimidazo[2,1 -h]pteridin-2,4(3H,4aH)-dione10 a–d über die Kondensation von1 a–d mit 5-Brom-5-nitrobarbitursäure (8) und nachfolgender Cyclisierung der intermediären 5-[(Benzimidazol-2-ylmethyl)alkylamino]-5-nitrobarbitursäuren9 a–d mit 5% NaOH dargestellt. Die thermische Cyclisierung der Produkte9 a–d wurde ebenfalls untersucht. Die Verbindungen wurden mittels Elementaranalyse, IR und PMR charakterisiert.

     

Über die «aus dem Ring»-Claisen-Umlagerung von Naphthalinderivaten

When a mixture of (E)- and (Z)-1-propenylnaphth-2-yl-allylether ((E/Z)- 5 ) is heated to 182° only the (E)-isomer rearranges to give the ‘out-of-ring’ product (E/Z)- 16 , (Z)- 5 remains unchanged. At higher temperature (Z)- 5 yields 2-methyl-naphtho[2,1-b]furane ( 15 ) as the main product. The mixture of β-chloro-allyl derivatives (E/Z)- 6 behaves in a similar way. These findings led us to suspect that the ‘out-of-ring’ products 16 and 18 are formed by direct [1, 5s] allyl migration from the starting ethers (E)- 5 and (E)- 6 . Kinetic' measurements made on (E)- and (Z)- 5 and the independently synthesized (E)- and (Z)-1-allyl-1-propenyl-1 H-naphthalen-2-ones ((E)- and (Z)- 17 ) show however, that the ethers (E)- 5 and (E)- 6 undergo a double [3s, 3s] rearrangement (i.e. Claisen followed by Cope rearrangement) and hydrogen migration to yield the ‘out-of-ring’ products (E/Z)- 16 and (E/Z)- 18 (Scheme 9). In the (Z)-series steric factors prevent the intermediate naphthalenones (Z)- 17 and (Z)-19 from undergoing the Cope rearrangement and instead, at higher temperature, cleavage of the allyl group occurs (Scheme 11). The isopropenyl derivative 7 behaves in a similar way (Scheme 5). Rearrangement of (E/Z)-1-propenylnaphth-2-yl benzyl ether ( 8 ) requires a higher temperature (214°). The nature of the products obtained (Scheme 4) makes the occurrence of a direct sigmatropic [1,5s] shift of the benzyl group very unprobable. In the case of (E/Z)-2-propenylnaphth-1-yl allyl ether ( 10 ) both isomers rearrange to yield the ‘out-of-ring’ product 30 and the para-Claisen product 32 (Scheme 7). This experiment also provides evidence against a sigmatropic [1,5s] shift of the allyl group. The same conclusion can be drawn from the thermal behaviour of (E/Z)-2-propenylphenyl allyl ether (11) and 6-t-butyl-2-propenylphenyl allyl ether ( 12 ) where only 11 yields traces of the ‘out-of-ring’ product 35 (Scheme 8). Up to this date there is no evidence whatsoever for the existence of a sigmatropic [1,5s] migration of an allyl group from oxygen to carbon. Thermal rearrangement of (E/Z)-1-propenylnaphth-2-yl propargyl ether ( 9 ) yields only (E/Z)-1-propenyl-benz[e]indan-2-one ( 27 ) (and its secondary product 28 ). The mechanism for this reaction is given in Scheme 12. Treatment of a mixture of (E/Z)- 18 with base yields the (Z)-cyclisation product 2,4-dimethylnaphth[2,1-b]oxepine ( 43 ) (Scheme 13).     

Polycyclic systems: Synthesis of isoindolo[2,1-b]-pyrrolo[1,2-d][2,4]benzodiazocine and isoindolo-[1,2-d]pyrrolo[1,2-a] [1,5]benzodiazocine

The synthesis of isoindolo[2,1-b]pyrrolo[1,2-d][2,4]benzodiazocine 7 and isoindolo[1,2-d]pyrrolo[1,2-a]-[1,5]benzodiazocine 13 are described starting from 2-(2-methoxycarbonyl)benzylphthalimide 1a and ethyl α-bromohomophthalate 9 respectively.     

Thermolyzed products of naphth[1,2-d]imidazo[2,1-b]-thiazole-2,3-dione

Themolysis of naphth[1,2-d]imidazo[2,1-b]thiazole-2,3-dione ( 1 ) in dimethylformamide gave an intermediate 2-isocyanatonaphtho[1,2-d]thiazole ( 2 ), which underwent [4 + 4] cyclodimerization to yield dinaphtho-[1″,2″:4,5;1′″,2′″:4′,5′]dithiazolo[3,2-a:3′,2′-e]-1,3,5,7-tetrazocine-9,19-dione ( 3 ). The possible [4 + 2] cycloadduct, 3-(2-naphtho-[1,2-d]-thiazolyl)naphtho[1′,2′:4,5]thiazolo[3,2-a]-1,3,5-triazine-2,4-dione ( 4 ), an usual dimer type of heterocyclic isocyanates was not produced. Discrimination between the two isomers was established on the basis of spectral analyses.     

Chiral [2H]-Labelled Methylene Groups in Trienoic- and Dienoic Fatty Acids: A Facile Approach via Asymmetric Epoxidation of [2H] Allyl Alcohols

Chiral [²H] -labelled methylene groups flanked by two double bonds within (poly)unsaturated fatty acids are readily available from trans-2,3-epoxy[2,3-²H₂] alk-4-yn-l-ols, obtained in their turn by asymmetric epoxidation of the corresponding (E)-[2,3-²H₂] alk-2-en-4-yn-l-ols (see Scheme 3). The procedure is exemplified for (8S,3Z,6Z,9Z)-[7,8-²H₂] trideca-3,6,9-trienoic acid ((8S)- 11 ) and (8R)- 11 (Scheme 4) as well as for (5S,3Z,6Z)-[4,5^?2H₂]deca-3,6-dienoic acid ((5S)- 13 ) and (5R)- 13 (Scheme 5).     

Synthesis of diarylazolo[<Emphasis Type="Italic">a</Emphasis>]pyridines from [(<Emphasis Type="Italic">Z</Emphasis>)-2,4-diaryl-4-oxo-2-butenyl]azolium salts

A method for the synthesis of derivatives of [1, 3]thiazolo[3,2-a]pyridines, pyrido[2,1-b][1, 3]benzo-thiazole, [1, 3, 4]thiadiazolo[3,2-a]pyridine, and [1, 2, 4]triazolo[4,3-a]pyridine, which includes base initiated cyclization of quaternary azolium salts, formed by the interaction of (Z)-1,3-diaryl-4-bromo-2-buten-1-ones with 1-alkyl-1H-1,2,4-triazoles, 4-methyl-1,3-thiazole, 1,3-benzothiazole, and N-phenyl-1,3,4-thiadiazole-2-amine. Derivatives of 2-chloroimidazo[1,2-a]pyridine were obtained when 5-chloro-1-methyl-1H-imidazole was used.     

Synthesis of spiro[2H-indole-2,1′-1H-isoindole]-3,3′-diones,spiro[1H-isobenzofuran-1,2′-2H-indole]-3,3′-diones and spiro[benzofuran-2,1′-isobenzofuran]-3,3′-diones via transannular reactions of eight membered ring intermediates

An auto oxidation-rearrangement product 4 was isolated from a high dilution reaction of ninhydrin with 3,4,5-trimethoxyaniline in water. A general synthesis of this compound and its derivatives 4–6 was devised by oxidation of tetrahydroindeno[1,2-b]indol-10-ones 1–3 with sodium periodate to give isoindolo[2,1-a]-indole-6,11-diones 4–6 in good yield. Compounds 4–6 can be easily transformed into spiro[1H-isobenzofuran-1,2′-2H-indole]-3,3′-diones 8–10 , spiro[2H-indole-2,1′-1H-isoindole]-3,3′-diones 11–13 and isoindole[1,2-a:2′,1′-b]pyrimidine-5,15-diones 15, 16 in high yields. Analogous reactions were performed on 3-amino-5a, 10a-dihydroxybenzo[b]indeno[2,1-d]furan-10-one ( 17 ) to give a dibenzoxocintrione 18 , spiro-[benzofuran-2,1′-isobenzofuran]-3,3′-dione 19 and an isoindol-1-one 20 .     

The synthesis of 2-phenyl-5H-imidazo[2,1-a] [2,4]benzodiazepines

A one step synthesis of 2-phenyl-5H-irnidazo[2,1-a][2,4]benzodiazepines ( 4 ) from 2-(2-imidazolyl)benzophenones ( 3 ) is reported. Oximation and reduction of the benzophenone, 3a led to the benzhydrylamine derivative 7 which was cyclized to differently substituted 6,7-di-hydroimidazo[2,1-a][2,4]benzodiazepines depending on the reactant chosen.     

Herstellung neuer polycyclischer Verbindungen durch intramolekulare Diels-Alder-Reaktionen von Cyclohexa-2,4-dien-1-on-Abkömmlingen

Synthesis of new polycyclic compounds by means of intramolecular Diels-Alder reactions of cyclohexa-2,4-dien-1-one derivatives Thermal rearrangement of mesityl penta-2,4-dienyl ether ( 1 ), consisting of the isomers E (93%) and Z (7%), furnished, besides mesitol, the two mesityl penta-1,3-dienyl ethers 2 (24%) and 3 (3%), and the two tricyclic ketones 4 (4,5%) and 5 (12,5%) (Scheme 1). A probable mechanism for this formation of 2 involves a [1,5]-hydrogen shift in (Z)- 1 . Isomerisation of (E)- 1 to (Z)- 1 at 145° occurs via reversible sigmatropic [3,3]- and [5,5]-rearrangements of (E)- 1 to the cyclohexadienones 38 and 39 respectively (see Chapter A p. 1710, and Scheme 15). Formation of 3 from either (Z)- 1 or 2 is rationalized by a series of pericyclic reactions as outlined in Chapter A and Scheme 16. The tricyclic ketones 4 and 5 are undoubtedly formed by internal Diels-Alder reactions of the 6-pentadienyl-cyclohexa-2,4-dien-1-one 6 (Scheme 2). In fact, at 80° 6 is converted into 4 (5%) and 5 (35%). At 80° the cyclohexadienone derivative 7 furnished the corresponding tricyclic ketones 8 (15%) and 9 (44%) (Scheme 2). 5 and 9 contain a homotwistane skeleton. 8 and 9 are easily prepared by reaction of sodium 2,6-dimethylphenolate with 3-methyl-penta-2,4-dienyl bromide at ambient temperature, followed by heating, and finally separation by cristallization and chromatography. The cyclohexadienones 6 and 7 have mainly (E)-configuration. Here too (E) → (Z) isomerization is a prerequisite for the internal Diels-Alder reaction, and this partly takes place intramolecularly through reversible Claisen and Cope rearrangements (Scheme 17). On the other hand, experiments in the presence of 3,5-d₂-mesitol have shown (Table 1) that intermolecular reactions, involving radicals and/or ions, are also operating (see Chapter B , p. 1712). Two different modi (I and II) exist for intramolecular Diels-Alder reactions (Scheme 18). Whereas only modus I is observed in the cyclization of 5-alkenyl-cyclohexa-l,3-dienes, in that of (2)-cyclohexadienones 6 and 7 (Scheme 2) both modi are operating. Only in modus 11-type transitions is the butadienyl conjugation of the side chain retained, so that modus 11-type addition is preferred (Chapter C p. 1716). Analogously to the synthesis of the tricyclic ketones 4 , 5 , 8 and 9 , the tricyclic ketone 15 (Scheme 4) and the tetracyclic ketone 11 (Scheme 3) are prepared from mesitol, pentenyl bromide and cycloheptadienyl bromide, respectively. From the polycyclic ketones derivatives such as the alcohols 16 , 17 , 18 , 19 , 23 , 24 and 25 (Schemes 9 and 11), policyclic ethers 20 , 21 , 22 and 26 (Scheme 10), epoxides 30 , 32 (Scheme 13), diketones 31 , 33 (Scheme 13) and ether-alcohols 35 and 36 (Scheme 14) have been prepared. Most of these conversions show high stereoselectivity.     

A ‘One-Pot’ Anellation Method for the Transformation of Heptalene-4,5-dicarboxylates into Benzo[a]heptalenes

It has been found that dimethyl heptalene-4,5-dicarboxylates, when treated with 4 mol-equiv. of lithiated N,N-dialkylamino methyl sulfones or methyl phenyl sulfone, followed by 4 mol-equiv. of BuLi in THF in the temperature range of ?78 to 20°, give rise to the formation of 3-[(N,N-dialkylamino)sulfonyl]- or 3-(phenylsul-fonyl)benzo[a]heptalene-2,4-diols of. (cf. Scheme 4, and Tables 2 and 3). Accompanying products are 2,4-bis{[(N,N-dialkylamino)sulfonyl]methyl}- or 2,4-bis[(phenylsulfonyl)methyl]-4,10a-dihydro-3H-heptaleno[1,10-bc]furan-3-carboxylates as mixtures of diastereoisomers of. cf. Scheme 4, and (Tables 2 and 3) which are the result of a Michael addition reaction of the lithiated methyl sulfones at C(3) of the heptalene-4,5-dicarboxylates, followed by (sulfonyl)methylation of the methoxycarbonyl group at C(5) and cyclization of. (cf. Scheme 5). It is assumed that the benzo[a]heptalene formation is due to (sulfonyl)methylation of both methoxycarbonyl groups of the heptalene-4,5-dicarboxylates of. (cf. Schemes 6 and 8). The resulting bis-enolates 35 are deprotonated further. The thus formed tris-anions 36 can then cyclize to corresponding tris-anions 37 of cyclopenta[d]heptalenes which, after loss of N,N-dialkylamido sulfite or phenyl sulfinate, undergo a ring-enlargement reaction by 1,2-C migration finally leading to the observed benzo[a]heptalenes of. (cf. Schemes 8 and 9). The structures of the new product types have been finally established by X-ray crystal-structure analyses (cf. Figs. 1 and 2 as well as Exper. Part).     

1-R-2-[(1E,3E)-4-Aminobuta-1,3-dien-1-yl]-1H-benzimidazoles. Synthesis and some transformations

7-Nitropyridobenzimidazolium salts are cleaved with secondary amines to form 2-[(E,E)-4-aminobuta-1,3-dienyl]-1H-benzimidazoles. The latter react with dimethyl acetylene-dicarboxylate to yield 4a-[(E,Z,E)-6-amino-4,5-dimethoxycarbonylhexa-1,3,5-trien-1-yl]-1,2,3,4-tetra(methoxycarbonyl)-4a,5-dihydropyrido[1,2-a]benzimidazoles.     

Alkylation of 2,3,6,11-tetrahydroanthra[2,1-d]isothiazole-3,6,11-trione and its S-oxide

The reactions of 2,3,6,11-tetrahydroanthra[2,1-d]isothiazole-3,6,11-trione with dimethyl sulfate, benzyl chloride, and allyl bromide afforded the corresponding 2-alkyl-2,3,6,11-tetrahydroanthra[2,1-d]isothiazole-3,6,11-triones and 3-(alkoxy)-6,11-dihydroanthra[2,1-d]isothiazole-6,11-diones. The reactions of 2,3,6,11-tetrahydroanthra[2,1-d]isothiazole-3,6,11-trione and its S-oxide with a formaldehyde—secondary amine system yielded 2-[(alkylamino)methyl]-2,3,6,11-tetrahydroanthra[2,1-d]isothiazole-3,6,11-triones and 2-[(alkylamino)methyl]-3,6,11-trioxo-2,3,6,11-tetrahydroanthra[2,1-d]isothiazole 1-oxides, respectively.     

New heterocyclic structures. [1,3]Thiazino[3,2-a]purine and [1,2,3]triazolo[4,5-d][1,3]thiazino[3,2-a]pyrimidine

Derivatives of two new molecular structures, namely, [1,3]thiazino[3,2-a]purine and [1,2,3]triazolo[4,5-d]-[1,3]thiazino[3,2-a]pyrimidine, were synthesized together with other heterocyclic compounds. Retrosynthetic analysis of their molecular skeletons suggested a simple way of obtaining 3,4-dihydro-7,8-diamino-2H,6H-pyrimido[2,1-b][1,3]thiazin-6-one, which is a useful intermediate for their synthesis. This intermediate and the thiazole homologue were obtained directly by reaction of 5,6-diamino-2,3-dihydro-2-thioxo-4(lH)-pyrimidi-none with 1,3- or 1,2-dibromoalkane, respectively.     

Ring closure reactions with nitriles. I. Formation of pyrrolo [2,1-c] [1,2,4] benzothiadiazines and pyrrolo[1,2-a] quinazolines

Pyrrolo[2,1-c][1,2,4]benzothiadiazines have been prepared from the reactions of o-amino-benzenesulfonamides with γ-cyanopropionaldehydes. Pyrrolo[1,2-a]quinazolines have been prepared from the reaction of anthranilamides with either γ-cyanopropionaldehyde or succinic anhydride. The cyclization of a 4-oxo-2-quinazolinepropionic acid has produced a pyrrolo-[1,2-a]quinazoline and the isomeric pyrrolo[2,1-b]quinazoline.     

Synthesis of novel imidazo[1,2-a]pyrrolo[2,1-c][1,4]benzodiazepines and pyrimido[1,2-a]pyrrolo[2,1-c][1,4]benzodiazepines

Several 1 1-amino-5H-pyrrolo[2,1-c][1,4]benzodiazepines have been used as starting material to prepare a number of derivatives of 9H-imidazo[1,2-a]pyrrolo[2,1-c][1,4]benzodiazepines and 10H-pyrimido[1,2-a]pyrrolo[2,1-c][1,4]benzodiazepines. The imidazole nucleus was built by reaction of amidines with ethyl bromopyruvate or aminoacetaldehyde dimethylacetal. Several derivatives of imidazo[1,2-a]pyrrolo[2,1-c][1,4]benzodiazepine have been prepared by formylation of the pyrrole ring followed by formation of thioamides. Condensation of 11-amino-5H-pyrrolo[2,1-c][1,4]benzodiazepines with diethyl ethoxymethylenemalonate afforded intermediate diesters which were transformed into the corresponding 10H-pyrimido[1,2-a]pyrrolo[2,1-c]-benzodiazepines.     

Reductive Elimination of Phenylsulfonyl Groups in the 3‐Position of Benzo[a]heptalene‐2,4‐diols

3‐(Phenylsulfonyl)benzo[a]heptalene‐2,4‐diols 1 can be desulfonylated with an excess of LiAlH₄/MeLi?LiBr in boiling THF in good yields (Scheme 6). When the reaction is run with LiAlH₄/MeLi, mainly the 3,3′‐disulfides 6 of the corresponding 2,4‐dihydroxybenzo[a]heptalene‐3‐thiols are formed after workup (Scheme 7). However, the best yields of desulfonylated products are obtained when the 2,4‐dimethoxy‐substituted benzo[a]heptalenes 2 are reduced with an excess of LiAlH₄/TiCl₄ at ?78→20° in THF (Scheme 10). Attempts to substitute the PhSO₂ group of 2 with freshly prepared MeONa in boiling THF led to a highly selective ether cleavage of the 4‐MeO group, rather than to desulfonylation (Scheme 13).     

Synthesis of 5H-imidazo[2,1-c]pyrrolo[1,2-a][1,4]benzodiazepine

We have synthesized 5H-imidazo[2,1-c]pyrrolo[1,2-a][1,4]benzodiazepine 1 in five steps from 1-(2-amino-methylphenyl) pyrrole 4 . Amidino derivatives 11-12 have also been prepared.     

Synthesis of azolo[a]pyridines from 5-(bromomethyl)hept-4-en-3-one and 5-bromopent-3-en-2-one derivatives

Alkyl derivatives of 1H-imidazo[1,2-a]pyridin-4-ium, 5H-pyrido[1,2-a]benzimidazol-10-ium, 1H-[1,2,4]-triazolo[4,3-a]pyridin-4-ium, and 3-methylthiazolo[3,2-a]pyridin-4-ium bromides were obtained in two stages from (4Z)-5-(bromomethyl)-2,2,6,6-tetramethylhept-4-en-3-one, 5-bromo-4-methylpent-3-en-2-one, or (3E)-5-bromopent-3-en-2-one by alkylation of 1-alkyl-1H-imidazoles, 1-alkyl-1H-benz-imidazoles, 1-methyl-1H-1,2,4-triazole, and 4-methylthiazole and subsequent cyclization of the quaternary azolium salts in the presence of bases.     

Stereoselektive Synthesen von (Z)-(10-Methoxy-4H-benzo[4,5]cyclohepta[1,2-b]thiophen-4-yliden)essigsäure

Stereoselective Syntheses of (Z)-(10-Methoxy-4H-benzo[4,5]cyclohepta[1,2-b]thiophen-4-ylidene)acetic Acid Two stereoselective syntheses for the antiinflammatory compound 1 ((Z)-isomer) are described. In the first approach (Strategy A, Scheme 1) the stereoselective synthesis of 1 was realized via the bicyclic compound 11 under thermodynamic conditions, followed by a thiophene annelation with retention of the double-bond geometry (Schemes 2–4). Optimized conditions were necessary to avoid (E/Z)-isomerization during annelation. In the second approach (Strategy B, Scheme 1), diastereoisomer 17b was obtained selectively from a mixture of the diastereoisomers 17b and 18b by combining thermodynamic epimerization and solubility differences (Scheme 5). Diastereoisomer 17b was converted into the tricyclic compound 23 using a novel thiophene annelation method which we described recently (Scheme 6). In a final step, a stereospecific ‘syn’-elimination transformed the sulfoxide 24 into the target compound 1 (Scheme 7). To avoid (E/Z)-isomerization, it was necessary to trap the sulfenic acid liberated during the reaction. The key reactions of both approaches are highly stereoselective (> 97:3).