2-溴噻吩和3-溴噻吩在267 nm的C-Br键解离机理

利用离子速度影像技术, 研究了2-溴噻吩和3-溴噻吩两种同分异构体在267 nm激光作用下的C—Br键解离机理, 获得了光解产物Br(2P3/2)和Br*(2P1/2)的能量和角度分布, 分析了两异构分子在267 nm 的C—Br键解离通道. 对于2-溴噻吩和3-溴噻吩, 产物Br来源于三个通道: (i) 从单重激发态系间窜跃到排斥的三重激发态的快速预解离; (ii)单重激发态内转化到高振动基态的热解离; (iii) 母体分子多光子电离后的解离. 2-溴噻吩的产物Br*具有类似的产生机制; 但对于3-溴噻吩, 从激发态内转换到高振动基态发生热解离成为产物Br*的主导通道, 而来自激发三重态的快速预解离通道则几乎消失. 定量地给出了各个通道的相对贡献、能量分配及各向异性分布信息. 实验发现, 随着溴原子在噻吩上取代位置远离硫原子, 来自通道(i)和(ii)产物之间的比例明显减小, 相应的各向异性分布有变弱趋势.     

邻溴甲苯在234和267 nm的光解动力学

利用离子速度影像技术结合共振增强多光子电离(REMPI)技术, 研究了邻溴甲苯在234和267 nm激光作用下的光解机理. 平动能分布表明, 基态Br(2P3/2)和自旋轨道激发态Br*(2P1/2)产生于两个解离通道: 快通道和慢通道. 快通道的各向异性参数在234 nm分别为1.15(Br)和0.55(Br*), 在267 nm分别为0.90(Br)和0.60(Br*). 慢通道的各向异性参数在234 nm分别为0.12(Br)和0.14(Br*), 在267 nm分别为0.11(Br)和0.10(Br*). 源自于慢通道的Br和Br*碎片的各向异性弱于快通道. Br(2P3/2)的相对量子产率Φ(Br)在234 nm为0.67, 在267 nm为0.70. 邻溴甲苯在234 和267 nm光解主要产生基态产物Br(2P3/2). 快通道产生于(π, π*)束缚单重态被激发, 随后通过排斥性(n, σ*)态的预解离. 慢通道各向异性参数接近零, 由此证实慢通道来源于单重激发态内转换到高振动基态而引发的热解离.     

氧硫化碳在230 nm光激发下的S(~3P)解离通道

在230nm激光激发下,氧硫化碳(OCS)分子迅速解离生成振动基态但高转动激发的CO(X~1∑_g~+,v=0,J=42-69)碎片,并通过共振增强多光子电离技术实现其离子化。通过检测处于J=56-69转动激发态CO碎片的离子速度聚焦影像,我们获得了各转动态CO碎片的速度分布和空间角度分布,其中包含了S(1D)+CO的单重态和S(~3P_J)+CO三重态解离通道的贡献。不同的转动态CO碎片对应三重态产物通道的量子产率略有不同,经加权平均我们得到230 nm附近光解OCS分子中S(3P)解离通道的量子产率为4.16%。结合高精度量化计算的OCS分子势能面和吸收截面的信息,我们获得了OCS光解的三重态解离机理,即基态OCS(X~1A')分子吸收一个光子激发到弯曲的A~1A'态之后,通过内转换跃迁回弯曲构型的基电子态,随后在C-S键断裂过程中与2~3A"(c~3A")态强烈耦合并沿后者势能面绝热解离。     

离子液体中聚(3-溴噻吩)的电化学合成和电色效应研究

以1-丁基-3-甲基咪唑六氟磷酸盐离子液体[BMIM]PF₆既作为溶剂又作为支持电介质, 通过恒电流、循环伏安等方法制备聚(3-溴噻吩)(PBrT)膜. 采用红外光谱(FT-IR)和扫描电子显微镜(SEM)对PBrT膜的结构和形貌进行表征, 用热重和差热分析法(TG-DTA)研究聚合膜的热稳定性, 并利用紫外-可见光谱(UV-Vis)、计时电流和计时吸收曲线研究该聚合膜电化学和电致变色的特性. 研究结果表明, 与传统方法比较, 在离子液体[BMIM]PF₆中制备的PBrT膜更致密、光滑, 具有良好的氧化还原可逆性和充放电能力, 电活性高, 热稳定性好. 以该方法制备的PBrT膜颜色变化明显, 响应时间快(0.5 s), 同时由于离子液体具有电位窗宽、导电率高、可循环利用等优点, 因此在电化学聚合等方面具有良好的应用前景.     

纳米TiO2膜负载聚(3-溴噻吩)的电化学聚合和电色效应研究

本文以纳米多孔的TiO2膜为基底,通过恒电流阳极聚合的方法制备聚(3-溴噻吩) (PBrT)膜,并研究负载在纳米TiO2膜上PBrT的电致变色性能。采用原子力显微镜(AFM)对纳米TiO2膜的形貌进行表征。利用紫外吸收光谱、计时安培法、计时吸收法研究PBrT膜的电致变色性能。结果显示,沉积在纳米多孔TiO2膜上的PBrT具有更优越的电致变色性能。PBrT膜氧化态时为亮红色,还原态时为深蓝色,颜色的对比度为22%,库仑效率为70%,着色效率为191.3 cm2 C-1（还原态）,88.9 cm2 C-1（氧化态）,该聚合膜具有良好的记忆效应。PBrT/TiO2优异的电致变色性能使其成为良好的电致变色材料,在电致变色器件方面具有潜在的应用价值。     

甲苯、2-甲基噻吩和3-甲基噻吩的化学分离方法研究

报道了一种分离甲苯、2-甲基噻吩和3-甲基噻吩的方法。通过氯化反应将沸点非常接近的甲苯、2-甲基噻吩和3-甲基噻吩转化为沸点相差较大的甲苯(111℃)、2-氯-5-甲基噻吩(155℃)和2,5-二氯-3-甲基噻吩(185℃),通过对比实验获得氯代反应的最佳条件为:2-甲基噻吩和3-甲基噻吩与磺酰氯的投料比1∶1. 75,反应温度65℃,反应时间2 h。通过精馏将三者分离并提纯,得到甲苯、高附加值的2-氯-5-甲基噻吩和2,5-二氯-3-甲基噻吩产品;通过催化还原反应将2-氯-5-甲基噻吩和2,5-二氯-3-甲基噻吩分别还原为2-甲基噻吩和3-甲基噻吩,达到完全分离、提纯的目的。     

量子态选择的分子离子解离动力学：阈值光电子-光离子符合成像技术的应用

阈值光电子一光离子符合速度成像技术通过对光电子和符合的光离子同时进行速度聚焦控制,大幅提高了电子和离子的收集效率和离子平动能分辨率,成为开展气相分子光电离和光电离．解离动力学研究的有效工具．利用该技术,我们精确地测量了分子的电离能、离子出现势等重要参数,并且开展了若干具有量子态或内能选择的离子解离动力学研究,描绘了相关势能面存在浅势阱等重要动力学特征,讨论了不同振动态和电子态的激发对解离机理和产物通道的重要影响．     

2-甲基噻吩光异构化成3-甲基噻吩的理论研究

用CASSCF方法以6-31G基组研究了2-甲基噻吩光异构化为3-甲基噻吩的光化学反应和基态(S₀)及三重激发态(T₁)的相关势能面.反应主要发生在三重态(T₁)上,其间经历了两个双自由基,1个三元环中间体及4个过渡态.沿着反应路径找到了2个T₁/S₀势能面交叉点,其结构都类似于双自由基.在第二个T₁/S₀势能面交叉点附近由T₁向S₀的系间窜越(ISC)最为有利.     

2-噻吩乙酸的合成

以噻吩为原料,经乙酰基反应、氧化重排生成2-噻吩乙酸甲酯(2),2经水解得2-噻吩乙酸(3),总收率53．0％,其结构经IR和^1H NMR确证。     

C-Br Bond Dissociation Mechanisms of 2-Bromothiophene and 3-Bromothiophene at 267 nm

C-Br bond dissociation mechanisms of 2-bromothiophene and 3-bromothiophene at 267 nm were investigated using ion velocity imaging technique. Translational energy distributions and angular distributions of the photoproducts, Br(²P_3/2) and Br^*(²P_½), were obtained and the possible dissociation channels were analyzed. For these two bromothiophenes, the Br fragments were produced via three channels: (i) the fast predissociation following the intersystem crossing from the excited singlet state to repulsive triplet state; (ii) the hot dissociation on highly vibrational ground state following the internal conversion of the excited singlet state; and (iii) the dissociation following the multiphoton ionization of the parent molecules. Similar channels are involved for photoproduct Br^* of the 2-bromothiophene dissociation at 267 nm; whereas for the photoproduct Br^* of 3-bromothiophene, the dissociation channel via internal conversion from the excited singlet state to highly vibrational ground state became dominating and the fast predissociation channel via the excited triplet state almost disappeared. Informations about the relative contribution, energy disposal, and the anisotropy of each channel were quantitatively given. It was found that with the position of Br atom in thienyl being far from S atom, the relative ratios of products from channels (i) and (ii) decreased obviously and the anisotropies corresponding to each channel became weaker.     

A Large-Scale Procedure for the Preparation of 3-Bromothiophene from 2-Bromothiophene and Sodamide in Liquid Ammonia

3-Bromothiophene can be prepared on a scale of several moles by treatment of 2-bromothiophene with an excess of sodamide in liquid ammonia and subsequent quenching of the reaction mixture with solid ammonium chloride.     

Photodissociation dynamics of allyl bromide at 234, 265, and 267 nm

The photodissociation dynamics of allyl bromide was investigated at 234, 265, and 267 nm. A two-dimensional photofragment ion velocity imaging technique coupled with a [2+1] resonance-enhanced multiphoton ionization scheme was utilized to obtain the angular and translational energy distributions of the nascent Br* (2P1/2) and Br (2P3/2) atoms. The Br fragments show a bimodal translational energy distribution, while the Br* fragments reveal one translational energy distribution. The vertical excited energies and the mixed electronic character of excited states were calculated at ab initio configuration interaction method. It is presumed that the high kinetic energy bromine atoms are attributed to the predissociation from 1(pipi*) or 1(pisigma*) state to the repulsive 1(nsigma*) state, and to the direct dissociation from 3(nsigma*) and 3(pisigma*) states, while the low kinetic energy bromine atoms stem from internal conversion from the lowest 3(pipi*) state to 3(pisigma*) state.     

n-C_3H_7I和i-C_3H_7I在266nm的光解:烷基自由基分支化对C—I解离动力学的影响(英文)

结合共振增强多光子电离(REMPI)方案,利用离子影像技术研究了n-C3H7I和i-C3H7I分子的光解动力学.分析和比较了它们光解过程中所涉及的能量分配和解离态间的非绝热跃迁信息.它们的I(2P3/2)产物通道的内能所占百分比要大于I*(2P1/2)产物通道的.随着烷烃自由基变得更加的分支化,一方面,原子碎片(I和I*)的能量分布明显变宽,暗示了α-碳原子上的烷基具有更复杂的振转模式;另一方面,在266nm光子的泵浦下,尽管两分子3Q0邝X跃迁的谐振强度表现出很小的差别,但是,产生I*碎片的几率明显降低,从n-C3H7I的0.72降到i-C3H7I的0.46.这可以归因于在光解i-C3H7I过程中弯曲振动模式对产生I和I*的贡献要比n-C3H7I光解过程中弯曲振动模式对I和I*的贡献更明显,使得3Q0与1Q1态之间的非绝热跃迁得到增强.此外,n-C3H7I和i-C3H7I的3Q0邝X跃迁并不完全是平行跃迁,对应的跃迁偶极矩与键轴间的夹角分别约为15°和18°.     

Photodissociation dynamics of CBr4 at 267 nm by means of ion velocity imaging

The photodissociation dynamics of CBr4 at 267 nm has been studied using time of flight (TOF) mass spectrometry and ion velocity imaging techniques. The photochemical products are detected with resonance enhanced multiphoton ionization (REMPI) as well as single-photon vacuum ultraviolet ionization at 118 nm. REMPI at 266.65 and 266.71 nm was used to detect the ground Br(2P32) and spin-orbit excited Br(2P12) atoms, respectively. The translational energy and angular distributions are consistent with direct dissociation from an excited triplet state and indirect dissociation from high vibrational levels on the singlet ground state surface. Br2+ ions are also observed in the TOF spectra with a focused 267 nm laser. The counter fragment, CBr2+, is observed when this photolysis laser is unfocused, and photons at 118 nm are used to ionize the radical products. The translational energy distributions of the CBr2+ and Br2+ products can be momentum matched, which indicates that molecular Br2 elimination is one of the primary dissociation channels.     

Two-photon Dissociation Study of Carbon Disulfide in Acetonitrile at 266 nm

Using laser flash photolysis/transient absorption technique for the study of two photon photodissociation of carbon disulfide in acetonitrile solution at 266 nm, the transient UV-Vis absorption spectrum of Rydberg state CS2 （6sσg） within 240-370 nm and subsequent dissociation product CS （α^3П） with the maximum absorption at 260 nm were directly observed. The lifetime of CS （α^3П） in the nitrogen and oxygen saturated solution is also studied in our experiment.     

Photodissociation dynamics of CH(2)Br(2) near 234 and 267 nm

The photodissociation dynamics of CH(2)Br(2) was investigated near 234 and 267 nm. A two-dimensional photofragment ion velocity imaging technique coupled with a [2+1] resonance-enhanced multiphoton (REMPI) ionization scheme was utilized to obtain the angular and translational energy distributions of the nascent Br ((2)P(3/2)) and Br* ((2)P(1/2)) atoms. The obtained translational energy distributions of Br and Br* are found consist of two components which should be come from the radical channel and secondary dissociation process, respectively. It is suggested that the symmetry reduction from C(2v) to C(s) during photodissociation invokes a non-adiabatic coupling between the 2B(1) and A(1) states. Consequently, the higher internal energy distribution of Br channel than Br* formation channel and the broader translational energy distribution of the former are presumed correlate with a variety of vibrational excitation disposal at the crossing point resulting from the larger non-adiabatic crossing from 2B(1) to A(1) state than the reverse crossing. Moreover, the measured anisotropy parameter beta indicate that fragments recoil along the Br-Br direction mostly in the photodissociation.     

Photodissociation studies of CBr(4) (+) and CBr(3) (+) at 267 nm using ion velocity imaging

Time-of-flight (TOF) mass spectroscopy and ion velocity imaging were employed to study the formation and photodissociation of CBr(4) (+) and CBr(3) (+) ions that were observed in the TOF spectrum when a CBr(4) beam was irradiated with 118 nm and 355 nm lasers. Energy dependence measurements show that both CBr(4) (+) and CBr(3) (+) ions depend on the fourth power of the 355 nm laser energy, which indicates that direct ionization and dissociative ionization of CBr(4) have low probabilities from the state initially excited at 118 nm. This is likely due to the large geometry change in the CBr(4) (+) ion. Two ionic fragments Br(+) and CBr(2) (+) were observed from the dissociation of CBr(4) (+) and CBr(3) (+) ions when another laser at 267 nm was introduced to the interaction region at a delayed time. The possible dissociation pathways and the angular and translational distributions are discussed in the paper.