A pressure correction‐volume of fluid method for simulation of two‐phase flows

A pressure correction method coupled with the volume of fluid (VOF) method is developed to simulate two‐phase flows. A volume fraction function is introduced in the VOF method and is governed by an advection equation. A modified monotone upwind scheme for a conservation law (modified MUSCL) is used to solve the solution of the advection equation. To keep the initial sharpness of an interface, a slope modification scheme is introduced. The continuum surface tension (CST) model is used to calculate the surface tension force. Three schemes, central‐upwind, Parker–Youngs, and mixed schemes, are introduced to compute the interface normal vector and the gradient of the volume fraction function. Moreover, a height function technique is applied to compute the local curvature of the interface. Several basic test problems are performed to check the order of accuracy of the present numerical schemes for computing the interface normal vector and the gradient of the volume fraction function. Three physical problems, two‐dimensional broken dam problem, static drop, and spurious currents, and three‐dimensional rising bubble, are performed to demonstrate the efficiency and accuracy of the pressure correction method. Copyright © 2010 John Wiley & Sons, Ltd.     

Multi‐material incompressible flow simulation using the moment‐of‐fluid method

This paper compares the numerical performance of the moment‐of‐fluid (MOF) interface reconstruction technique with Youngs, LVIRA, power diagram (PD), and Swartz interface reconstruction techniques in the context of a volume‐of‐fluid (VOF) based finite element projection method for the numerical simulation of variable‐density incompressible viscous flows. In pure advection tests with multiple materials MOF shows dramatic improvements in accuracy compared with the other methods. In incompressible flows where density differences determine the flow evolution, all the methods perform similarly for two material flows on structured grids. On unstructured grids, the second‐order MOF, LVIRA, and Swartz methods perform similarly and show improvement over the first‐order Youngs' and PD methods. For flow simulations with more than two materials, MOF shows increased accuracy in interface positions on coarse meshes. In most cases, the convergence and accuracy of the computed flow solution was not strongly affected by interface reconstruction method. Published in 2009 by John Wiley & Sons, Ltd.     

An analytical interface reconstruction algorithm in the PLIC‐VOF method for 2D polygonal unstructured meshes

Piecewise linear interface calculation (PLIC) schemes have been extensively employed in the volume‐of‐fluid (VOF) method for interface capturing in numerical simulations of multiphase flows. Polygonal unstructured meshes are often adopted because of their geometric flexibility and superiority in gradient calculation. An analytical interface reconstruction algorithm in the PLIC‐VOF method for arbitrary convex polygonal cells has been proposed in this study. The line interface at a given orientation within a polygonal cell is located by an analytical technique. It has been tested successfully for four different geometric shapes that are common in polygonal meshes. The computational efficiency of the present algorithm has been compared with several published schemes in the literature. The proposed algorithm has been shown to yield higher accuracy with reduction in computational complexity. A numerical simulation of a dam‐breaking problem has been performed using the proposed analytical PLIC technique on polygonal meshes. The results are in good agreement with experimental data available in the literature, which serves as a demonstration of its performance in a real multiphase flow.     

An anti‐diffusive volume of fluid method for interfacial fluid flows

A volume of fluid (VOF) method is developed combining a first‐order limited downwind scheme with higher order accurate schemes. The method is characterized by retaining a sharp fluid interface and a reduction in numerical diffusion near the interface, but avoids complicated geometrical reconstruction as occurs in most volume tracing algorithms. To demonstrate the accuracy and robustness of the method, a selection of numerical experiments are presented involving a pure advection problem, a water wave impact caused by a dam breaking and liquid sloshing in a partially filled tank. Copyright © 2011 John Wiley & Sons, Ltd.     

Finite‐volume‐type VOF method on dynamically adaptive quadtree grids

This paper describes a finite‐volume volume‐of‐fluid (VOF) method for simulating viscous free surface flows on dynamically adaptive quadtree grids. The scheme is computationally efficient in that it provides relatively fine grid resolution at the gas–liquid interface and coarse grid density in regions where flow variable gradients are small. Special interpolations are used to ensure volume flux conservation where differently sized neighbour cells occur. The numerical model is validated for advection of dyed fluid in unidirectional and rotating flows, and for two‐dimensional viscous sloshing in a rectangular tank. Copyright © 2004 John Wiley & Sons, Ltd.     

An immersed boundary method for incompressible flows using volume of body function

A simple and effective immersed boundary method using volume of body (VOB) function is implemented on unstructured Cartesian meshes. The flow solver is a second‐order accurate implicit pressure‐correction method for the incompressible Navier–Stokes equations. The domain inside the immersed body is viewed as being occupied by the same fluid as outside with a prescribed divergence‐free velocity field. Under this view a fluid–body interface is similar to a fluid–fluid interface encountered in the volume of fluid (VOF) method for the two‐fluid flow problems. The body can thus be identified by the VOB function similar to the VOF function. In fluid–body interface cells the velocity is obtained by a volume‐averaged mixture of body and fluid velocities. The pressure inside the immersed body satisfies the same pressure Poisson equation as outside. To enhance stability and convergence, multigrid methods are developed to solve the difference equations for both pressure and velocity. Various steady and unsteady flows with stationary and moving bodies are computed to validate and to demonstrate the capability of the current method. Copyright © 2005 John Wiley & Sons, Ltd.     

Validation of the S‐CLSVOF method with the density‐scaled balanced continuum surface force model in multiphase systems coupled with thermocapillary flows

Three numerical methods, namely, volume of fluid (VOF), simple coupled volume of fluid with level set (S‐CLSVOF), and S‐CLSVOF with the density‐scaled balanced continuum surface force (CSF) model, have been incorporated into OpenFOAM source code and were validated for their accuracy for three cases: (i) an isothermal static case, (ii) isothermal dynamic cases, and (iii) non‐isothermal dynamic cases with thermocapillary flow including dynamic interface deformation. Results have shown that the S‐CLSVOF method gives accurate results in the test cases with mild computation conditions, and the S‐CLSVOF technique with the density‐scaled balanced CSF model leads to accurate results in the cases of large interface deformations and large density and viscosity ratios. These show that these high accuracy methods would be appropriate to obtain accurate predictions in multiphase flow systems with thermocapillary flows. Copyright © 2016 John Wiley & Sons, Ltd.     

An efficient method for capturing free boundaries in multi‐fluid simulations

An easy‐to‐use front capturing method is devised by directly solving the transport equation for a volume of fluid (VOF) function. The key to this method is a semi‐Lagrangian conservative scheme, namely CIP_CSL3, recently proposed by the author. In the CIP_CSL3 scheme, the first‐order derivative of the interpolation polynomial at each cell centre is used to control the shape of the reconstructed profile. We show in the present paper that the first‐order derivative, which plays a crucial role in reconstructing the interpolation profile, can also be used to eliminate numerical diffusion. The resulting algorithm can be directly used to compute the VOF‐like function and retain the compact thickness of the moving interface in multi‐fluid simulations. No surface reconstruction based on the value of VOF function is required in the method, which makes it quite economical and easy to use. The presented method has been tested with various interfacial flows including pure rotation, vortex shearing, multi‐vortex deformation and the moving boundaries in real fluid as well. The method gives promising results to all computed problems. Copyright © 2003 John Wiley & Sons, Ltd.     

Numerical simulation of droplet ejection of thermal inkjet printheads

In this study, we present a method to predict the droplet ejection in thermal inkjet printheads including the growth and collapse of a vapor bubble and refill of the firing chamber. The three‐dimensional Navier–Stokes equations are solved using a finite‐volume approach with a fixed Cartesian mesh. The piecewise‐linear interface calculation‐based volume‐of‐fluid method is employed to track and reconstruct the ink–air interface. A geometrical computation based on Lagrangian advection is used to compute the mass flux and advance the interface. A simple and efficient model for the bubble dynamics is employed to model the effect of ink vapor on the adjacent ink liquid. To solve the surface tension‐dominated flow accurately, a hierarchical curvature‐estimation method is proposed to adapt to the local grid resolution. The numerical methods mentioned earlier have been implemented in an internal simulation code, CFD3. The numerical examples presented in the study show good performance of CFD3 in prediction of surface tension‐dominated free‐surface flows, for example, droplet ejection in thermal inkjet printing. Currently, CFD3 is used extensively for printhead development within Hewlett‐Packard. Copyright © 2015 John Wiley & Sons, Ltd.     

The intersection marker method for 3D interface tracking of deformable surfaces in finite volumes

Currently, the majority of computational fluid dynamics (CFD) codes use the finite volume method to spatially discretise the computational domain, sometimes as an array of cubic control volumes. The Finite volume method works well with single‐phase flow simulations, but two‐phase flow simulations are more challenging because of the need to track the surface interface traversing and deforming within the 3D grid. Surface area and volume fraction details of each interface cell must be accurately accounted for, in order to calculate for the momentum exchange and rates of heat and mass transfer across the interface. To attain a higher accuracy in two‐phase flow CFD calculations, the intersection marker (ISM) method is developed. The ISM method is a hybrid Lagrangian–Eulerian front‐tracking algorithm that can model an arbitrary 3D surface within an array of cubic control volumes. The ISM method has a cell‐by‐cell remeshing capability that is volume conservative and is suitable for the tracking of complex interface deformation in transient two‐phase CFD simulations. Copyright © 2015 John Wiley & Sons, Ltd.     

A 5‐equation,transient, hyperbolic, 1‐dimensional model for slug capturing in pipes

A novel numerical scheme for slug capturing in pipes using a 1‐dimensional transient hyperbolic 5‐equation 2‐fluid model is presented. Previous work has shown that 1‐dimensional 2‐fluid models are able to capture slug flow automatically. In this work, a similar approach is further developed using a new numerical scheme, applied to a hyperbolic 5‐equation 2‐fluid model. Starting from a finite volume discretisation of a 5‐equation 2‐fluid hyperbolic model and adding appropriate closure relations, a second‐order code is implemented and applied to air‐water flows in horizontal pipes, simulating the 2‐phase to 1‐phase flow process. The code is evaluated in some common standard test cases. A slug capturing application is also discussed. We show, in an air/water horizontal pipe, slug initiation, growth, and development. Moreover, a grid refinement analysis is performed showing that the method is grid independent and we show the code capability to take into account eventual surface tension effects, through the instantaneous pressure relaxation process. Finally, a prediction of flow regime transitions is shown and compared with a well‐known theoretical flow pattern map in addition to a preliminary comparison of computed slug characteristics against well‐known empirical correlations.     

3D two phase flows numerical simulations by SL‐VOF method

This paper describes the development of a semi‐Lagrangian computational method for simulating complex 3D two phase flows. The Navier–Stokes equations are solved separately in both fluids using a robust pseudo‐compressibility method able to deal with high density ratio. The interface tracking is achieved by the segment Lagrangian volume of fluid (SL‐VOF) method. The 2D SL‐VOF method using the concepts of VOF, piecewise linear interface calculation (PLIC) and Lagrangian advection of the interface is herein extended to 3D flows. Three different test cases of SL‐VOF 3D are presented for validation and comparison either with 2D flows or with other numerical methods. A good agreement is observed in each case. Copyright © 2004 John Wiley & Sons, Ltd.     

Development of temporal and spatial high‐order schemes for two‐fluid seven‐equation two‐pressure model and its applications in two‐phase flow benchmark problems

Current existing main nuclear thermal‐hydraulics (T‐H) system analysis codes, such as RALAP5, TRACE, and CATHARE, play a crucial role in the nuclear engineering field for the design and safety analysis of nuclear reactor systems. However, two‐fluid model used in these T‐H system analysis codes is ill posed, easily leading to numerical oscillations, and the classical first‐order methods for temporal and special discretization are widely employed for numerical simulations, yielding excessive numerical diffusion. Two‐fluid seven‐equation two‐pressure model is of particular interest due to the inherent well‐posed advantage. Moreover, high‐order accuracy schemes have also attracted great attention to overcome the challenge of serious numerical diffusion induced by low‐order time and space schemes for accurately simulating nuclear T‐H problems. In this paper, the semi‐implicit solution algorithm with high‐order accuracy in space and time is developed for this well‐posed two‐fluid model and the robustness and accuracy are verified and assessed against several important two‐phase flow benchmark tests in the nuclear engineering T‐H field, which include two linear advection problems, the oscillation problem of the liquid column, the Ransom water faucet problem, the reversed water faucet problem, and the two‐phase shock tube problem. The following conclusions are achieved. (1) The proposed semi‐implicit solution algorithm is robust in solving two‐phase flows, even for fast transients and discontinuous solutions. (2) High‐order schemes in both time and space could prevent excessive numerical diffusion effectively and the numerical simulation results are more accurate than those of first‐order time and space schemes, which demonstrates the advantage of using high‐order schemes.     

A discrete forcing method dedicated to moving bodies in two‐phase flow

The numerical simulation of interaction between structures and two‐phase flows is a major concern for many industrial applications. To address this challenge, the motion of structures has to be tracked accurately. In this work, a discrete forcing method based on a porous medium approach is proposed to follow a nondeformable rigid body with an imposed velocity by using a finite‐volume Navier‐Stokes solver code dedicated to multiphase flows and based on a two‐fluid approach. To deal with the action reaction principle at the solid wall interfaces in a conservative way, a porosity is introduced allowing to locate the solid and insuring no diffusion of the fluid‐structure interface. The volumetric fraction equilibrium is adapted to this novelty. Mass and momentum balance equations are formulated on a fixed Cartesian grid. Interface tracking is addressed in detail going from the definition of the porosity to the changes in the discretization of the momentum balance equation. This so‐called time‐ and space‐dependent porosity method is then validated by using analytical and elementary test cases.     

Numerical approach for generic three-phase flow based on cut-cell and ghost fluid methods

In this paper, we introduce numerical methods that can simulate complex multiphase flows. The finite volume method, applying Cartesian cut-cell is used in the computational domain, containing fluid and solid, to conserve mass and momentum. With this method, flows in and around any geometry can be simulated without complex and time consuming meshing. For the fluid region, which involves liquid and gas, the ghost fluid method is employed to handle the stiffness of the interface discontinuity problem. The interaction between each phase is treated simply by wall function models or jump conditions of pressure, velocity and shear stress at the interface. The sharp interface method “coupled level set (LS) and volume of fluid (VOF)” is used to represent the interface between the two fluid phases. This approach will combine some advantages of both interface tracking/capturing methods, such as the excellent mass conservation from the VOF method and good accuracy of interface normal computation from the LS function. The first coupled LS and VOF will be generated to reconstruct the interface between solid and the other materials. The second will represent the interface between liquid and gas.     

A discontinuous Galerkin‐based sharp‐interface method to simulate three‐dimensional compressible two‐phase flow

A numerical method for the simulation of compressible two‐phase flows is presented in this paper. The sharp‐interface approach consists of several components: a discontinuous Galerkin solver for compressible fluid flow, a level‐set tracking algorithm to follow the movement of the interface and a coupling of both by a ghost‐fluid approach with use of a local Riemann solver at the interface. There are several novel techniques used: the discontinuous Galerkin scheme allows locally a subcell resolution to enhance the interface resolution and an interior finite volume Total Variation Diminishing (TVD) approximation at the interface. The level‐set equation is solved by the same discontinuous Galerkin scheme. To obtain a very good approximation of the interface curvature, the accuracy of the level‐set field is improved and smoothed by an additional P_NP_M‐reconstruction. The capabilities of the method for the simulation of compressible two‐phase flow are demonstrated for a droplet at equilibrium, an oscillating ellipsoidal droplet, and a shock‐droplet interaction problem at Mach 3. Copyright © 2015 John Wiley & Sons, Ltd.     

非结构网格二阶有限体积法中黏性通量离散格式精度分析与改进

非结构网格二阶有限体积离散方法广泛应用于计算流体力学工程实践中,研究非结构网格二阶精度有限体积离散方法的计算精度具有现实意义. 计算精度主要受到网格和计算方法的影响,本文从单元梯度重构方法、黏性通量中的界面梯度计算方法两个方面考察黏性流动模拟精度的影响因素. 首先从理论上分析了黏性通量离散中的“奇偶失联”问题,并通过基于标量扩散方程的制造解方法验证了“奇偶失联”导致的精度下降现象,进一步通过引入差分修正项消除了“奇偶失联”并提高了扩散方程计算精度;其次,在不同类型、不同质量的网格上进行基于扩散方程的制造解精度测试,考察单元梯度重构方法、界面梯度计算方法对扩散方程计算精度的影响,结果显示,单元梯度重构精度和界面梯度计算方法均对扩散方程计算精度起重要作用;最后对三个黏性流动算例(二维层流平板、二维湍流平板和二维翼型近尾迹流动)进行网格收敛性研究,初步验证了本文的结论,得到了计算精度和网格收敛性均较好的黏性通量计算格式.      

An efficient and accurate algebraic interface capturing method for unstructured grids in 2 and 3 dimensions: The THINC method with quadratic surface representation

We present in this paper an efficient and accurate volume of fluid (VOF) type scheme to compute moving interfaces on unstructured grids with arbitrary quadrilateral mesh elements in 2D and hexahedral elements in 3D. Being an extension of the multi‐dimensional tangent of hyperbola interface capturing (THINC) reconstruction proposed by the authors in Cartesian grid, an algebraic VOF scheme is devised for arbitrary quadrilateral and hexahedral elements. The interface is cell‐wisely approximated by a quadratic surface, which substantially improves the numerical accuracy. The same as the other THINC type schemes, the present method does not require the explicit geometric representation of the interface when computing numerical fluxes and thus is very computationally efficient and straightforward in implementation. The proposed scheme has been verified by benchmark tests, which reveal that this scheme is able to produce high‐quality numerical solutions of moving interfaces in unstructured grids and thus a practical method for interfacial multi‐phase flow simulations. Copyright © 2014 John Wiley & Sons, Ltd.     

A simple algebraic interface capturing scheme using hyperbolic tangent function

This paper presents a simple and practical scheme for capturing moving interfaces or free boundaries in multi‐fluid simulations. The scheme, which is called THINC (tangent of hyperbola for interface capturing), makes use of the hyperbolic tangent function to compute the numerical flux for the fluid fraction function, and gives a conservative, oscillation‐less and smearing‐less solution to the fluid fraction function even for the extremely distorted interfaces of arbitrary complexity. The numerical results from the THINC scheme possess adequate quality for practical applications, which make the extra geometric reconstruction, such as those in most of the volume of fluid (VOF) methods unnecessary. Thus the scheme is quite simple. The numerical tests show that the THINC scheme has competitive accuracy compared to most exiting methods. Copyright © 2005 John Wiley & Sons, Ltd.     

A conservative local interface sharpening scheme for the constrained interpolation profile method

A conservative local interface sharpening scheme has been developed for the constrained interpolation profile method with the conservative semi‐Lagrangian scheme, because the conservative semi‐Lagrangian scheme does not feature a mechanism to control the interface thickness, thus causing an increase of numerical error with the advance of the time step. The proposed sharpening scheme is based on the conservative level set method proposed by Olsson and Kreiss. However, because their method can cause excessive deformation of the free‐surface in certain circumstances, we propose an improvement of the method by developing a local sharpening technique. Several advection tests are presented to assess the correctness of the advection and the improved interface sharpening scheme. This is followed by the validations of dam‐breaking flow and the rising bubble flows. The mass of the fluid is exactly conserved and the computed terminal velocity of the rising bubble agrees well with the experiments compared with other numerical methods such as the volume of fluid method (VOF), the front tracking method, and the level set method. Copyright © 2011 John Wiley & Sons, Ltd.