Abrasive Stripping Voltammetric Studies of Lignin and Lignin Model Compounds

Lignin is potentially a major renewable, nonfossil source of aromatic and cyclohexyl compounds. In this study, we have investigated the abrasive stripping voltammetry of lignin and four lignin model compounds in the room temperature ionic liquids (RTILs) [C₄mim][NTf₂], [N_6,2,2,2][NTf₂] and [C₄mim][OTf] (where [C₄mim]⁺=1‐butyl‐3‐methylimidazolium, [N_6,2,2,2]⁺=n‐hexyltriethylammonium, [NTf₂]^?=bis(trifluoromethanesulfonyl)imide and [OTf]^? =trifluoromethanesulfonate) on a gold macrodisk and in 0.1 M H₂SO₄ and 0.1 M NaOH on a boron‐doped diamond (BDD) macroelectrode, with the hope of using the voltammetry to fingerprint the functional groups within the lignin molecule. The use of RTILs on metal electrodes, or either acidic or basic media in combination with BDD electrodes allows solvent systems with wide electrochemical potential windows, useful for studying voltammetry which may be difficult to observe in systems where early breakdown of the solvent occurs.     

Ionic Fluids Containing Both Strongly and Weakly Interacting Ions of the Same Charge Have Unique Ionic and Chemical Environments as a Function of Ion Concentration

Liquid multi‐ion systems made by combining two or more salts can exhibit charge ordering and interactions not found in the parent salts, leading to new sets of properties. This is investigated herein by examining a liquid comprised of a single cation, 1‐ethyl‐3‐methylimidazolium ([C₂mim]⁺), and two anions with different properties, acetate ([OAc]^?) and bis(trifluoromethylsulfonyl)imide ([NTf₂]^?). NMR and IR spectroscopy indicate that the electrostatic interactions are quite different from those in either [C₂mim][OAc] or [C₂mim][NTf₂]. This is attributed to the ability of [OAc]^? to form complexes with the [C₂mim]⁺ ions at greater than 1:1 stoichiometries by drawing [C₂mim]⁺ ions away from the less basic [NTf₂]^? ions. Solubility studies with molecular solvents (ethyl acetate, water) and pharmaceuticals (ibuprofen, diphenhydramine) show nonlinear trends as a function of ion content, which suggests that solubility can be tuned through changes in the ionic compositions.     

Structure and dynamics of room temperature ionic liquids with bromide anion: results from 81Br NMR spectroscopy

We report the results of a comprehensive ⁸¹Br NMR spectroscopic study of the structure and dynamics of two room temperature ionic liquids (RTILs), 1‐butyl‐3‐methylimidazolium bromide ([C₄mim]Br) and 1‐butyl‐2,3‐dimethylimidazolium bromide ([C₄C₁mim]Br), in both liquid and crystalline states. NMR parameters in the gas phase are also simulated for stable ion pairs using quantum chemical calculations. The combination of ⁸¹Br spin‐lattice and spin‐spin relaxation measurements in the motionally narrowed region of the stable liquid state provides information on the correlation time of the translational motion of the cation. ⁸¹Br quadrupolar coupling constants (C_Q) of the two RTILs were estimated to be 6.22 and 6.52 MHz in the crystalline state which were reduced by nearly 50% in the liquid state, although in the gas phase, the values are higher and span the range of 7–53 MHz depending on ion pair structure. The C_Q can be correlated with the distance between the cation–anion pairs in all the three states. The ⁸¹Br C_Q values of the bromide anion in the liquid state indicate the presence of some structural order in these RTILs, the degree of which decreases with increasing temperature. On the other hand, the ionicity of these RTILs is estimated from the combined knowledge of the isotropic chemical shift and the appropriate mean energy of the excited state. [C₄C₁mim]Br has higher ionicity than [C₄mim]Br in the gas phase, while the situation is reverse for the liquid and the crystalline states. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescent Soft Material: Two New Europium‐Based Ionic Liquids

Two new Eu‐based ionic liquid systems, [C₄mim][DTSA] : [Eu(DTSA)₃] and 2[C₄mim] [DTSA] : [Eu(DTSA)₃] were synthesized at 120° under inert conditions from 1‐butyl‐1‐methylimidazolium ditoluenesulfonylamide ([C₄mim][DTSA]). The identity and purity of the synthesized compounds were confirmed by elemental analysis, IR, Raman, and ¹H‐NMR spectroscopy. As they solidify below 100° as glasses they qualify as ionic liquids. Fluorescence measurements show that the materials exhibit a strong red luminescence of high color purity. Therefore, they have the potential to be used for optical applications such as in emission displays.     

Abrasive Stripping Voltammetry in Room Temperature Ionic Liquids

We report on the abrasive stripping voltammetry (AbrSV) of six different solid compounds of widely different natures in room temperature ionic liquids (RTILs). Copper as a metal representative, Prussian blue as a typical inorganic complex, indigo as an organic dye model, and anthracene, pyrene, and 9,10‐diphenylanthracene as the typical representatives of aromatic hydrocarbons were chosen in this study. They were immobilized on a gold electrode surface by mechanical abrasion and their subsequent voltammetric measurements were carried out in the ionic liquid [C₄mim][NTf₂], 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide. The present work demonstrates that RTILs provide an excellent electrochemical solvent environment for abrasive stripping voltammetric analysis; in particular, the much wider potential windows in RTILs as compared to aqueous media greatly enhance the analytical applicability of the AbrSV technique.     

Radiation-induced darkening of ionic liquid [C4mim][NTf2] and its decoloration

The radiation effect on a hydrophobic room-temperature ionic liquid (RTIL), 1-butyl-3-methyl-imidazolium bis[(trifluoromethyl)sulfonyl]imide ([C₄mim][NTf₂]), was studied by γ-irradiation under nitrogen atmosphere. Accompanied by color darkening and increase of light absorbance in a wide wavelength range, a distinct absorption peak at around 290 nm for irradiated [C₄mim][NTf₂] appeared when acetonitrile was used as solvent, and the intensity of the peak enhanced with increasing dose. The spectrophotometric study on the irradiated RTILs containing 1,3-dialkylimidazolium cations associated with different inorganic anions revealed that the peak is ascribed to the radiolysis products of the [C₄mim]⁺. And the wavelength of the peak was affected by alkyl chain length on imidazolium cation, while the intensity of the peak was influenced by anions. With incorporating a little amounts of oxidants, such as KMnO₄ and HNO₃ into irradiated [C₄mim][NTf₂], the intensity of the peak at 290 nm decreased obviously and the decoloration of [C₄mim][NTf₂] occurred, suggesting that the peak at 290 nm is assigned to the colored species and the species can be oxidized.     

Water‐Free Rare‐Earth‐Metal Ionic Liquids/Ionic Liquid Crystals Based on Hexanitratolanthanate(III) Anion

The hexanitratolanthanate anion (La(NO₃)₆^3?) is an interesting symmetric anion suitable to construct the component of water‐free rare‐earth‐metal ionic liquids. The syntheses and structural characterization of eleven lanthanum nitrate complexes, [C_nmim]₃[La(NO₃)₆] (n=1, 2, 4, 6, 8, 12, 14, 16, 18), including 1,3‐dimethylimidazolium hexanitratolanthanate ([C₁mim]₃[La(NO₃)₆], 1 ), 1‐ethyl‐3‐methylimidazolium hexanitratolanthanate ([C₂mim]₃[La(NO₃)₆], 2 ), 1‐butyl‐3‐methylimidazolium hexanitratolanthanate ([C₄mim]₃[La(NO₃)₆], 3 ), 1‐isobutyl‐3‐methylimidazolium hexanetratolanthanate ([isoC₄mim]₃[La(NO₃)₆], 4 ), 1‐methyl‐3‐(3′‐methylbutyl)imidazolium hexanitratolanthanate ([MC₄mim]₃[La(NO₃)₆], 5 ), 1‐hexyl‐3‐methylimidazolium hexanitratolanthanate ([C₆mim]₃[La(NO₃)₆], 6 ), 1‐methyl‐3‐octylimidazolium hexanitratolanthanate ([C₈mim]₃[La(NO₃)₆], 7 ), 1‐dodecyl‐3‐methylimidazolium hexanitratolanthanate ([C₁₂mim]₃[La(NO₃)₆], 8 ), 1‐methyl‐3‐tetradecylimidazolium hexanitratolanthanate ([C₁₄mim]₃[La‐(NO₃)₆], 9 ), 1‐hexadecyl‐3‐methylimid‐azolium hexanitratolanthanum ([C₁₆dmim]₃[La(NO₃)₆], 10 ), and 1‐methyl‐3‐octadecylimidazolium hexanitratolanthanate ([C₁₈mim]₃[La(NO₃)₆], 11 ) are reported. All new compounds were characterized by ¹H and ¹³C NMR, and IR spectroscopy as well as elemental analysis. The crystal structure of compound 1 was determined by using single‐crystal X‐ray diffraction, giving the following crystallographic information: monoclinic; P2₁/c; a=15.3170 (3), b=14.2340 (2), c=13.8954(2) Å; β=94.3453(15)°, V=3020.80(9) ų, Z=4, ρ=1.764 g cm^?3. The coordination polyhedron around the lanthanum ion is rationalized by six nitrate anions with twelve oxygen atoms. No hydrogen‐bonding network or water molecule was found in 1 . The thermodynamic stability of the new complexes was investigated by using thermogravimetric analysis (TGA). The water‐free hexanitratolanthanate ionic liquids are thermal and moisture stable. Four complexes, namely complexes 8 – 11 , were found to be ionic liquid crystals by differential scanning calorimetry (DSC) and polarizing optical microscopy (POM). They all present smectic A liquid‐crystalline phase.     

Reverse ATRP process of acrylonitrile in the presence of ionic liquids

An ionic liquid, 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([C₄mim] [BF₄]), was first used as the solvent in azobisisobutyronitrile (AIBN)‐initiated reverse atom transfer radical polymerization (RATRP) of acrylonitrile with FeCl₃/succinic acid (SA) as the catalyst system. The polymerization in [C₄mim][BF₄] proceeded in a well‐controlled manner as evidenced by kinetic studies. Compared with the polymerization in bulk, the polymerization in [C₄mim][BF₄] not only showed the best control of molecular weight and its distribution but also provided rather rapid reaction rate with the ratio of [C₄mim][BF₄] at 200:1:2:4. The polymerization apparent activation energies in [C₄mim][BF₄] and bulk were calculated to be 48.2 and 55.7 kJ mol^?1, respectively. Polyacrylonitrile obtained was successfully used as a macroinitiator to proceed the chain extension polymerization in [C₄mim][BF₄] via a conventional ATRP process. [C₄mim][BF₄] and the catalyst system could be easily recycled and reused after simple purification and had no effect on the living nature of polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2701–2707, 2008     

Theoretical study of interactions between 1-alkyl-3-methyimidazolium tetrafluoroborate and dibenzothiophene: DFT,NBO, and AIM analysis

Density functional theory is employed to study the interaction energies between dibenzothiophene (DBT) and 1-alkyl-3-methylimidazolium tetrafluoroborate ([C _n mim]⁺[BF₄]^?). The structures of DBT, 1-ethyl-3-methylimidazolium tetrafluoroborate ([C₂mim]⁺[BF₄]^?), 1-butyl-3-methylimidazolium tetrafluoroborate ([C4mim]+[BF₄]?), 1-hexyl-3-methylimidazolium tetrafluoroborate ([C₆mim]⁺[BF₄]^?), 1-octyl-3-methylimidazolium tetrafluoroborate ([C₈mim]⁺[BF₄]^?), [C₂mim]⁺[BF₄]^?–DBT, [C₄mim]⁺[BF₄]^?–DBT, [C₆mim]⁺[BF₄]^?–DBT and [C₈mim]⁺[BF₄]^?–DBT systems are optimized systematically at the B3LYP/6-31G(d,p) level, and the most stable geometries are obtained by NBO and AIM analyses. The results indicate that DBT and imidazolium rings of ionic liquids are parallel to each other. It is found that the [BF₄]^? anion prefers to be located close to a C1–H9 proton ring in the vicinity of the imidazolium ring and the most stable gas-phase structure of [C _n mim]⁺[BF₄]^? has four hydrogen bonds between [C _n mim]+ and [BF₄]?. There are hydrogen bonding interactions, π–π and C–H–π interactions between [C₈mim]⁺[BF₄]^? and DBT, which is confirmed by NBO and AIM analyses. The calculated interaction energies for the studied ionic liquids can be used to interpret a better extracting ability of [C₈mim]⁺[BF₄]^? to remove DBT, due to stronger interactions between [C₈mim]⁺[BF₄]^? and DBT, in agreement with the experimental results of dibenzothiophene extraction by [C _n mim]⁺[BF₄]^?.     

Gas‐Phase Affinity Scales for Typical Ionic Liquid Moieties Determined by using Cooks’ Kinetic Method

Gas‐phase affinity studies based on cations and anions commonly present in ionic liquid structures, give quantitative information about the magnitude of the interactions holding the two species together when ILs are formed. They also provide clues on how these interactions depend on the nature of the cationic and anionic moieties. In the present work, mass spectrometric experiments, performed using electrospray ionization quadrupole ion‐trap and Fourier transform ion cyclotron resonance mass spectrometry, were used to obtain two affinity scales by Cooks’ kinetic method: one scale for the various cations for the bis(trifluoromethylsulfonyl)imide anion, [NTf₂]^?, and another for the different anions for the 1‐butyl‐3‐methylimidazolium cation, [C₄mim]⁺. The obtained results are compared with previously reported data and discussed in terms of the structural characteristics of the different cationic and anionic species.     

离子液体[C2mim][GaCl4]的溶解热研究

在干燥氩气氛下, 用等摩尔的高纯无水GaCl3和[C2mim][Cl](氯化1-甲基-3-乙基咪唑)直接搅拌混合, 制备了淡黄色透明的的离子液体[C2mim][GaCl4] (1-ethyl-3-methylimidazolium chlorogallate) . 在298.15 K下, 利用具有恒温环境的溶解反应热量计, 测定了这种离子液体的不同浓度摩尔溶解焓 . 针对[C2mim][GaCl4]溶解于水后即分解的特点, 在Pitzer电解质溶液理论基础上, 提出了确定这种离子液体标准摩尔溶解焓的新方法, 得到了[C2mim][GaCl4]在水中的标准摩尔溶解焓, ＝－132 kJ•mol－1, 以及Pitzer焓参数组合: ＝－0.1373076和 ＝0.3484209. 借助热力学循环和Glasser离子液体晶格能理论, 用Ga3＋, Cl－和[C2mim]—的离子水化焓数据以及本文得到的[C2mim][GaCl4]标准摩尔溶解焓, 估算了配离子4Cl－(g)解离成Ga3＋(g)和4Cl－(g)的解离焓ΔHdis([GaCl4]-)≈5855 kJ•mol－1. 这个结果揭示了离子液体[C2mim][GaCl4]的标准摩尔溶解焓绝对值并不很大的原因, 即是很大的离子水化焓被很大的[GaCl4]－(g)的解离焓相互抵消了.     

Calorimetric Study on the Ion Pairing and Aggregation of 1-Ethyl-3-Methylimidazolium bis(trifluoromethylsulfonyl)amide ([C2mim][NTf2]) and Related Ionic Liquids in the Low-Dielectric Constant Solvent Chloroform

A calorimetric study of dissolution of the ionic liquids (ILs) 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([C₂mim][NTf₂]), 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([C₆mim][NTf₂]), and 1-hexyl-3-methylimidazolium tris(trifluoromethylsulfonyl)methide ([C₆mim][CTf₃]) into chloroform (CHCl₃) is presented with particular focus on [C₂mim][NTf₂]. The interpretation of the calorimetric data for [C₂mim][NTf₂] was aided by additional NMR self-diffusion measurements and viscosity measurements that through the Stokes–Einstein equation provided information about the average size of the species present. It is evident that the main equilibrium species are ion pairs and aggregates. An estimate for the enthalpy contribution from aggregate formation for [C₂mim][NTf₂] was found to be ?2.09 kJ per mol of added IL at 288.2 K and slightly decreasing in magnitude to ?1.11 kJ·mol^?1 at 318.2 K. While all three ILs release heat upon dissolution into CHCl₃, different temperature trends are observed demonstrating the fine balance of competing contributions from breaking IL interactions, cavity formation for the solutes to reside in, and the establishment of new solute–solvent interactions.     

Selective extraction of Cs(I) using 1,3-[(2,4-diethylheptylethoxy)oxy]-2,4-crown-6-calix[4]arene in ionic liquid solvents and its application to the treatment of high-level liquid waste

To separate heat-generating Cs from high-level liquid waste (HLLW), the extraction of Cs(I) using 1,3-[(2,4-diethylheptylethoxy)oxy]-2,4-crown-6-calix[4]arene (calix[4]arene-R14) in combination with 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) ionic liquids ([C _n mim][NTf₂], where n?=?2, 4, and 6) was investigated. Under moderately acidic conditions, the calix[4]arene-R14/[C _n mim][NTf₂] system showed a higher extraction efficiency (E_Cs) than that exhibited by the conventional calix[4]arene-R14/dichloromethane system. All extraction processes reached equilibrium within 5 min. Slope analysis revealed that the Cs:calix[4]arene-R14 inclusion complex has a 1:1 stoichiometry. The extraction was found to be exothermic and influenced by the presence of Na(I). These extraction systems exhibited high efficiency and selectivity for Cs(I) in simulated HLLW.     

DFT Study of the Geometrical and Electronic Structures of Geminal Dicationic Ionic Liquids 1,3‐Bis[3‐methylimidazolium‐1‐yl]hexane Halides

In this work, the geometrical and electronic properties of the mono cationic ionic liquid 1‐hexyl‐3‐methylimidazolium halides ([C₆(mim)]⁺_X^?, X=Cl, Br and I) and dicationic ionic liquid 1,3‐bis[3‐methylimidazolium‐1‐yl]hexane halides ([C₆(mim)₂X₂], X=Cl, Br and I) were studied using the density functional theory (DFT). The most stable conformer of these two types ionic liquids (IL) are determined and compared with each other. Results show that in the most stable conformers, in both monocationic ILs and dicationic ILs, the Cl^? and Br^? anions prefer to locate almost in the plane of the imidazolium ring whereas the I^? anion prefers nearly vertical location respect to the imidazolium ring plan. Comparison of hydrogen bonding and ionic interactions in these two types of ionic liquids reveals that these ionic liquids can be formed hydrogen bond by Cl^? and Br^? anion. The calculated thermodynamic functions show that the interaction of cation — anion pair in the dicationic ionic liquids are more than monocationic ionic liquids and these interactions decrease with increasing the halide anion atomic weight.     

Ionic Liquid‐based Microchannels for Highly Sensitive and Fast Amperometric Detection of Toxic Gases

Ionic liquid (IL)‐based microchannels sensors have been fabricated and employed for the detection of toxic ammonia (NH₃) and hydrogen chloride (HCl) gases, with enhanced sensitivity and response times compared to conventional electrodes. Electrochemical techniques were employed to understand the behaviour of these highly toxic gases in two ionic liquids, [C₄mpyrr][NTf₂] and [C₂mim][NTf₂], on a gold modified microchannels electrode. The limits of detection (LODs) obtained in [C₄mpyrr][NTf₂] for NH₃ (3.7 ppm) and in [C₂mim][NTf₂] for HCl (3.6 ppm) were lower than the current Occupational Safety and Health Administration Permissible Exposure Limit (OSHA PEL) for the two gases (25 ppm for NH₃ and 5 ppm for HCl). The response time of the sensor is 15 s with a sensitivity of 143 nA ppm^?1 and 14 nA ppm^?1 for HCl and NH₃, respectively. These results demonstrate the superiority of IL‐based microchannels sensors for detecting toxic gases, when compared to commercially available sensors or traditional IL‐based sensor designs, where high sensitivity or fast response time is still a challenge.     

Effect of Ionic Liquid Anion Type in the Performance of Solid Polymer Electrolytes Based on Poly(Vinylidene fluoride‐trifluoroethylene)

The effect of different anions within the ionic liquid in the characteristics of solid polymer electrolytes (SPEs) based on P(VDF‐TrFE) has been investigated. 1‐ethyl‐3‐methylimidazolium acetate, [C₂mim][OAc], 1‐ethyl‐3‐methylimidazolium triflate, [C₂mim][(CF₃SO₃)], 1‐ethyl‐3‐methylimidazolium lactate, [C₂mim][Lactate], 1‐ethyl‐3‐methylimidazolium thiocyanate, [C₂mim][SNC] and 1‐ethyl‐3‐methylimidazolium hydrogen sulfate [C₂mim][HSO₄] have been used in SPE prepared by solvent casting. The polymer phase, thermal and electrochemical properties of the SPE have been determined. The thermal and electrical properties of the SPEs strongly depend on the selected IL, as determined by their different interactions with the polymer matrix. The room temperature ionic conductivity increases in the following way for the different anions: [SNC]>[CF₃SO₃)]>[HSO₄]>[Lactate]>[OAc], which is mainly dependent on the viscosity of the ionic liquid.     

Thermodynamic properties and polymorphism of 1-alkyl-3-methylimidazolium bis(triflamides)

Heat capacities in a range of temperatures of (5 to 370) K, enthalpies and temperatures of phase transitions for 1-ethyl-3-methylimidazolium bis(triflamide) ([C₂mim][NTf₂]) and 1-octyl-3-methylimidazolium bis(triflamide) ([C₈mim][NTf₂]) have been determined by adiabatic calorimetry. [C₂mim][NTf₂] has been found to form four crystalline phases with different fusion temperatures. Formation of the phases can be controlled by the temperature of annealing during crystallization. [C₈mim][NTf₂] forms three sequences of crystalline modifications, each including two polymorphs. Based on results of the measurements, thermodynamic functions for the compounds under study have been calculated.A heat-capacity anomaly near T = 230 K reported earlier for [C₄mim][NTf₂] and [C₆mim][NTf₂] have been found in some crystalline modifications of both the studied compounds. The position of the anomaly depends on the temperature of annealing of the crystals.     

Investigations on the Physicochemical and Radiolytic Degradation Properties of Tri-<Emphasis Type="Italic">n</Emphasis>-butylphosphate–Ionic Liquid in the Presence of Nitric Acid

Tri-n-butylphosphate (TBP) in an ionic liquid (IL) has been proposed as a suitable alternative for the solvent extraction of actinides from nitric acid solutions. This paper reports the detailed investigations on the physicochemical and hydrodynamic properties of the solvent system containing TBP in 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C₄mim][NTf₂]) IL. The properties such as density, viscosity, phase separation time (PST), etc., were measured for irradiated and unirradiated solvent phases composed of TBP, [C₄mim][NTf₂] and 1.1 mol·L^–1 TBP in [C₄mim][NTf₂]. The results are compared with the values obtained in acid-equilibrated IL phases. ATR–FTIR spectroscopy and dynamic light scattering measurement of the IL phase were employed to characterize the interactions among the IL, TBP and nitric acid medium, and the aggregate size of the adduct formed in the IL phase.     

Ultrafast FRET to Study Spontaneous Micelle‐to‐Vesicle Transitions in an Aqueous Mixed Surface‐Active Ionic‐Liquid System

The spontaneous micelle‐to‐vesicle transition in an aqueous mixture of two surface‐active ionic liquids (SAILs), namely, 1‐butyl‐3‐methylimidazolium n‐octylsulfate ([C₄mim][C₈SO₄]) and 1‐dodecyl‐3‐methylimidazoium chloride ([C₁₂mim]Cl) is described. In addition to detailed structural characterization obtained by using dynamic light scattering, transmission electron microscopy (TEM), and cryogenic TEM techniques, ultrafast fluorescence resonance energy transfer (FRET) from coumarin 153 (C153) as a donor (D) to rhodamine 6G (R6G) as an acceptor (A) is also used to study micelle–vesicle transitions in the present system. Structural transitions of SAIL micelles ([C₄mim][C₈SO₄] or [C₁₂mim]Cl micelles) to mixed SAIL vesicles resulted in significantly increased D –A distances, and therefore, increased timescale of FRET. In [C₄mim][C₈SO₄] micelles, FRET between C153 and R6G occurs on an ultrafast timescale of 3.3 ps, which corresponds to a D –A distance of about 15 Å. As [C₄mim][C₈SO₄] micelles are transformed into mixed micelles upon the addition of a 0.25 molar fraction of [C₁₂mim]Cl, the timescale of FRET increases to 300 ps, which suggests an increase in the D –A distance to 31 Å. At a 0.5 molar fraction of [C₁₂mim]Cl, unilamellar vesicles are formed in which FRET occurs on multiple timescales of about 250 and 2100 ps, which correspond to D –A distances of 33 and 47 Å. Although in micelles and mixed micelles the obtained D –A distances are well correlated with their radius, in vesicles the obtained D –A distance is within the range of the bilayer thickness.     

Supramolecular Self‐Assembly of Cucurbit[6]uil and Ionic Liquid in Non‐aqueous System

A novel [2]pseudorotaxane of cucurbit[6]uril(CB[6]) and 1‐butyl‐3‐methyl‐imidazolium bromide ([C₄mim]Br) was synthesized by directly mixing the host and the guest molecules in non‐aqueous system. Structural characterizations of the [2]pseudorotaxane were carried out by 1D, 2D NMR and X‐ray crystallography techniques both in solution and in crystal structure. The crystal structure demonstrated that CB[6] and [C₄mim]Br formed a complex with the ratio 1:1, in which one guest [C₄mim]Br was included inside the CB[6], while two other [C₄mim]Br molecules were free and surrounded the [2]pseudorotaxane as solvent molecules, which could stabilize the crystal structure through hydrogen bonds. Moreover, parallel solvent channels consisting by free [C₄mim]Br molecules occupied the pores among the frame of the pseudorotaxanes and formed zigzag lines in the crystal structure. [C₄mim]Br can serve as not only the guest reactant but also the solvent in the formation of [2]pseudorotaxane formation.