Mixed Aza‐Thioether Crowns Containing a 1,10‐Phenanthroline Sub‐Unit as Neutral Ionophores for Silver Ion

Three different recently synthesized aza‐thioether crowns containing a 1,10‐phenanthroline sub‐unit (L1–L3) and a corresponding acyclic ligand (L4) were studied to characterize their abilities as silver ion ionophores in PVC‐membrane electrodes. Novel conventional silver‐selective electrodes with internal reference solution (CONISE) and coated graphite‐solid contact electrodes (SCISE) were prepared based on one of the 15‐membered crowns containing two donating S atoms and two phenanthroline‐N atoms (L1). The electrodes reveal a Nernstian behavior over wide Ag⁺ ion concentration ranges (1.0×10^?5?1.0×10^?1 M for CONISE and 5.0×10^?8?4.0×10^?2 M for SCISE) and very low limits of detection (8.0×10^?6 M for CONISE and 3.0×10^?8 M for SCISE). The potentiometric response is independent from pH of the solution in the pH range 3.0–8.0. The electrodes manifest advantages of low resistance, very fast response and, most importantly, good selectivities relative to a wide variety of other cations. The electrodes can be used for at least 2 months (for CONISE) and 4 months for (SCISE) without any appreciable divergence in potentials. The electrodes were used as an indicator electrode in the potentiometric titration of Ag⁺ ion and in the determination of silver in photographic emulsions and in radiographic and photographic films.     

Potentiometric Ag+ Sensors Based on Conducting Polymers: A Comparison between Poly(3,4‐ethylenedioxythiophene) and Polypyrrole Doped with Sulfonated Calixarenes

Potentiometric Ag⁺ sensors were prepared by galvanostatic electropolymerization of 3,4‐ethylenedioxythiophene (EDOT) and pyrrole (Py) on glassy carbon electrodes by using sulfonated calixarenes as doping ions. Poly(3,4‐ethylenedioxythiophene) (PEDOT) and polypyrrole (PPy) doped with p‐sulfonic calix[4]arene (C4S), p‐sulfonic calix[6]arene (C6S) and p‐sulfonic calix[8]arene (C8S) were compared. PEDOT and PPy doped with poly(styrene sulfonate) (PSS) were also included for comparison. The analytical performance of the conducting polymer‐based Ag⁺ sensors was studied by potentiometric measurements. All conducting polymer and dopant combinations showed sensitivity and selectivity to Ag⁺ compared to several alkali, alkaline‐earth, and transition‐metal cations. The type of the conducting polymer used for the fabrication of the electrodes was found to have a more significant effect on the selectivity of the electrodes to Ag⁺ than the ring size of the sulfonated calixarenes used as dopants. Selected conducting polymer‐based sensors were studied by cyclic voltammetry (CV) and energy dispersive analysis of X‐rays (EDAX) measurements. Results from the EDAX measurements show that both PEDOT‐ and PPy‐based membranes accumulate silver.     

Flow Injection Analysis of Aluminum Chlorohydrate in Antiperspirant Deodorants Using a Built‐in Three‐in‐one Screen‐Printed Silver Electrode

A screen‐printed silver strip with a built‐in three‐in‐one electrode (SPAgE) configuration of Ag‐working, Ag‐counter and Ag/Ag_xO (silver oxides) pseudoreference electrodes has been developed for sensitive and selective electrochemical flow injection analysis (FIA) of aluminum chlorohydrate (ACH) present in antiperspirants, through the free Cl^? ion liberated from ACH in aqueous medium, as a redox signal at Ag‐working electrode in pH 6 phosphate buffer solution (PBS). The solution phase and instrumental parameters were systematically optimized. The calibration graph was linear in the window 1–200 ppm concentration of ACH and the lowest detection limit (S/N=3) was 295 ppb with a slope of 0.0989 μA/ppm and regression coefficient of 0.998. Calculated relative standard deviation (RSD) values for the detection of 5 and 50 ppm ACH by this method are 2.21 % and 2.16 %, respectively. Four different antiperspirant deodorants real samples with and without ACH content were successfully analyzed and the detected values obtained were found to be in good agreement with the product labeled values.     

Polyaniline‐Modified Silver and Binary Silver‐Cobalt Catalysts for Oxygen Reduction Reaction

Novel dendrite‐like silver particles were electrodeposited on Ti substrates from a supporting electrolyte‐free 30 mmol L^?1 Ag(NH₃)₂⁺ solution, to synthesize the den‐Ag/Ti electrode. Binary Ag_xCo_y/Ti electrodes with different Ag:Co atomic ratios were further obtained by electrodeposition of Co particles on the den‐Ag/Ti electrode. Polyaniline (PANI) modified den‐Ag/Ti and Ag_xCo_y/Ti electrodes, PANI(n)‐den‐Ag/Ti and PANI(n)‐Ag_xCo_y/Ti, were also obtained by cyclic voltammetry at different numbers of cycles (n) in acidic and alkaline solutions containing aniline, respectively. All these electrodes exhibit high electroactivity for oxygen reduction reaction (ORR) in alkaline solution and their electroactivities follow the order: PANI(15)‐Ag₃₁Co₆₉/Ti>Ag₃₁Co₆₉/Ti>PANI(20)‐den‐Ag/Ti>den‐Ag/Ti. Among them, PANI(15)‐Ag₃₁Co₆₉/Ti displays the highest electrocatalytic activity for ORR with a much positive onset potential of 0 V (vs. Ag/AgCl) and a high ORR current density of 1.2 mA cm^?2 at ?0.12 V (vs. Ag/AgCl). The electrocatalysts are electrochemically insensitive to methanol and ethanol oxidation, and, as cathode electrocatalysts of direct alcohol fuel cells, can resist poisoning by the possible alcohol crossover from the anode.     

CuAg nanoparticles formed in situ on electrochemically pre‐anodized screen‐printed carbon electrodes for the detection of nitrate and nitrite anions

CuAg nanoparticles (CuAgNPs) were electrochemically formed in situ on pre‐anodized, screen‐printed carbon electrodes (SPCEs) that possessed many oxygen‐containing functional groups capable of adsorbing metal ions, namely Cu²⁺ and Ag⁺. Pre‐anodization was achieved using continuous cyclic voltammetry in the range of potential 0.3–2.0 V under a scan rate of 50 mV/s. Cu²⁺ and Ag⁺ ions were adsorbed on the pre‐anodized SPCE by immersing the electrode in solutions containing both metal ions, and then CuAgNPs were formed in situ via electrochemical reduction in a deaerated, neat NaClO₄ solution after the electrode was ultrasonicated to remove physically adsorbed metal ions. Although CuNPs showed higher activity than AgNPs toward both nitrate (NO₃⁻) and nitrite (NO₂⁻) ions, the instability of CuNPs hindered the application, so CuAgNPs were employed to achieve a compromise between sensitivity and stability. The SPCE/anodized/CuAgNP electrodes showed activity toward the electrochemical reduction of NO₃⁻ and NO₂⁻, respectively, with the limit of detection (LOD) of 15.6 μM (0.97 ppm) and 11.1 μM (0.51 ppm), which is sufficient to fit the allowed values (50 and 3 ppm, respectively) in drinking water as suggested by the World Health Organization (WHO).     

Determination of avoparcin in animal tissues and milk using LC‐ESI‐MS/MS and tandem‐SPE

A highly sensitive and selective method using LC‐ESI‐MS/MS and tandem‐SPE was developed to detect trace amounts of avoparcin (AV) antibiotics in animal tissues and milk. Data acquisition using MS/MS was achieved by applying multiple reaction monitoring of the product ions of [M + 3H]³⁺ and the major product ions of AV‐α and ‐β at m/z 637 → 86/113/130 and m/z 649 → 86/113/130 in ESI(+) mode. The calculated instrumental LODs were 3 ng/mL. The sample preparation was described that the extraction using 5% TFA and the tandem‐SPE with an ion‐exchange (SAX) and InertSep C18‐A cartridge clean‐up enable us to determine AV in samples. Ion suppression was decreased by concentration rates of each sample solution. These SPE concentration levels could be used to detect quantities of 5 ppb (milk), 10 ppb (beef), and 25 ppb (chicken muscle and liver). The matrix matching calibration graphs obtained for both AV‐α (r >0.996) and ‐β (r >0.998) from animal tissues and milk were linear over the calibration ranges. AV recovery from samples was higher than 73.3% and the RSD was less than 12.0% (n = 5).     

High‐Sensitivity Determination of Lead(II) and Cadmium(II) Based on the CNTs‐PSS/Bi Composite Film Electrode

A high‐sensitivity sensing platform for lead(II) and cadmium(II) based on the bismuth modified carbon nanotubes (CNTs)‐poly(sodium 4‐styrenesulfonate) composite film electrode (CNTs‐PSS/Bi) was fabricated. The composite film CNTs‐PSS/Bi provided remarkably improved sensitivity and reproducibility compared with previously reported CNTs‐modified electrodes. The detection limits were estimated to be 0.04 ppb for lead(II) and 0.02 ppb for cadmium(II) with a preconcentration time of 120 s, respectively. The linear responses of Cd²⁺ and Pb²⁺ were over the ranges of 0.5–50 ppb and 0.5–90 ppb, respectively. Finally, the practical application of the proposed method was verified in the real water sample with satisfactory results.     

Stripping Analysis of As(III) by Means of Screen‐Printed Electrodes Modified with Gold Nanoparticles and Carbon Black Nanocomposite

A novel sensor based on carbon black‐gold nanoparticle nanocomposite modified screen‐printed electrode (CB‐AuNPs/SPE) for the detection of As(III) has been developed. The sensor was prepared modifying the SPE with CB and AuNPs by a drop casting automatable deposition. The As(III) was detected by CB‐AuNPs/SPE using anodic stripping voltammetry, with a high sensitivity (673±6 µA µM^?1 cm^?2) and reaching a LOD of 0.4 ppb. Finally, CB‐AuNPs/SPE has been applied to As(III) trace analysis in drinking water, obtaining satisfactory recovery values (99±9 %).     

Redox Sorption and Recovery of Silver Ions as Silver Nanocrystals on Poly(aniline‐co‐5‐sulfo‐2‐anisidine) Nanosorbents

Poly[aniline(AN)‐co‐5‐sulfo‐2‐anisidine(SA)] nanograins with rough and porous structure demonstrate ultrastrong adsorption and highly efficient recovery of silver ions. The effects of five key factors—AN/SA ratio, Ag^I concentration, sorption time, ultrasonic treatment, and coexisting ions—on Ag^I adsorbability were optimized, and AN/SA (50/50) copolymer nanograins were found to exhibit much stronger Ag^I adsorption than polyaniline and all other reported sorbents. The maximal Ag^I sorption capacity of up to 2034 mg g^?1 (18.86 mmol g^?1) is the highest thus far and also much higher than the maximal Hg‐ion sorption capacity (10.28 mmol g^?1). Especially at ≤2 mM Ag^I, the nanosorbents exhibit ≥99.98 % adsorptivity, and thus achieve almost complete Ag^I sorption. The sorption fits the Langmuir isotherm well and follows pseudo‐second‐order kinetics. Studies by IR, UV/Vis, X‐ray diffraction, polarizing microscopy, centrifugation, thermogravimetry, and conductivity techniques showed that Ag^I sorption occurs by a redox mechanism mainly involving reduction of Ag^I to separable silver nanocrystals, chelation between Ag^I and ? NH? /? N?/? NH₂/ ? SO₃H/? OCH₃, and ion exchange between Ag^I and H⁺ on ? SO₃^?H⁺. Competitive sorption of Ag^I with coexisting Hg, Pb, Cu, Fe, Al, K, and Na ions was systematically investigated. In particular, the copolymer nanoparticles bearing many functional groups on their rough and porous surface can be directly used to recover and separate precious silver nanocrystals from practical Ag^I wastewaters containing Fe, Al, K, and Na ions from Kodak Studio. The nanograins have great application potential in the noble metals industry, resource reuse, wastewater treatment, and functional hybrid nanocomposites.     

Electrochemistry and Ion Sensing Properties of Conducting Hydrogel Layers Based on Polypyrrole and Alkoxysulfonated Poly(3,4‐ethylenedioxythiophene) (PEDOT‐S)

Acidic aqueous solutions containing pyrrole and alkoxysulfonated PEDOT derivative (PEDOT‐S) were found to undergo polymerization in the absence of an external oxidizing agent. The product was a nearly black‐colored conducting hydrogel that after separation could be dispersed in water or acetone. The suspensions could be used to deposit cast films on a polycrystalline gold electrode. The polymer modified electrode showed a nearly Nernstian potentiometric response to Ag⁺ cations in the concentration range of 10^?5–10^?1 M with the slope of 54 mV/decade. The response was specific to Ag⁺ compared to a series of alkali and transition‐metal cations (pK_Ag/M>3.7).     

Electrochemical Properties of Electrode Modified with Langmuir‐Blodgett Film of p‐tert‐Butylcalix[4]arene Derivatives and Its Application in Determining of Silver

A new type of voltammetric sensor, Langmuir‐Blodgett (LB) film of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐di(3‐thiadiazole‐propanoxy)‐26,28‐dihydroxycalix[4]arene modified glassy carbon electrode (LB_TZCA–GCE), was prepared. The electrochemical properties of LB_TZCA–GCE were researched in detail and its recognizing mechanism for silver ion in aqueous solution was discussed. Using this voltammetric sensor, a new stripping voltammetric method for determining of Ag⁺ was erected with good sensitivity, selectivity, reproducibility and recovery. The detection limit was 8×10^?9 M at accumulation time of 180 s. By this method, real samples (lake water, tap water and synthesis sample) were analyzed and the results obtained were well satisfactory.     

Screen Printed Carbon Electrode Modified with Poly(L‐Lactide) Stabilized Gold Nanoparticles for Sensitive As(III) Detection

Poly(L ‐lactide) stabilized gold nanoparticles (designated as PLA–Au^NP) with an average particle size of ca. 10 nm were used to modify a disposable screen‐printed carbon electrode (SPE) for the detection of As(III) by differential pulse anodic stripping voltammetry. Gold modification was evaluated by cyclic voltammetry, whereas scanning electron microscopy and transmission electron microscopy revealed the size and distribution of gold nanoparticles. The PLA–Au^NP/SPE was applied effectively to detect toxic As(III) in HCl medium. Under the optimal experimental conditions, a linear calibration curve up to 4 ppm with a detection limit (S/N=3) of 0.09 ppb was obtained. The sensitivity was good enough to detect As(III) at levels lower than the current EPA standard (10 ppb). Most importantly, the PLA–Au^NP/SPE can be tolerable from the interference of Cu, Cd, Fe, Zn, Mn, and Ni and hence provides a direct and selective detection method for As(III) in natural waters. Practical utility of the PLA–Au^NP/SPE was demonstrated to detect As(III) in “Blackfoot” disease endemic village groundwater from southwestern coast area of Taiwan (Pei‐Men).     

Tellurium Film Electrodes Deposited on Carbon and Mesoporous Carbon Screen‐printed Substrates for Anodic Stripping Voltammetric Determination of Copper

The performance of screen‐printed electrodes modified in situ with tellurium film for the anodic stripping voltammetric (ASV) determination of Cu(II) is reported. It was found that two types of screen‐printed substrates, namely carbon and mesoporous carbon, were optimal for this application. The selected in situ tellurium film modified electrodes were applied for the square wave ASV determination of copper at μg L⁻¹ concentration levels. Well‐defined and reproducible Cu oxidation stripping peaks were produced at a potential more negative than the anodic dissolution of tellurium. The highest sensitivity of Cu determination was achieved in 0.05 M HCl containing 50 μg L⁻¹ Te(IV) after 300 s of accumulation at −0.5 V. Using the optimized procedure, a linear range from 2 to 35 μg L⁻¹ of Cu(II) was obtained with a detection limit of 0.5 μg L⁻¹ Cu(II) (S/N=3) for 300 s of deposition time. Both sensors, carbon TeF‐SPE and mesoporous carbon TeF‐SPE, were successfully applied for the quantification of Cu in a certified reference surface water sample.     

Topological analysis of the three‐dimensional coordination polymer poly[(μ4‐azido)[μ4‐5‐(pyridin‐4‐yl)tetrazolido]disilver(I)]

The title compound, [Ag₂(C₆H₄N₄)(N₃₎]_n, was obtained under hydrothermal conditions at 433 K. The asymmetric unit of the orthorhombic space group (Pna2₁) consists of two Ag⁺ cations, an anionic 5‐(pyridin‐4‐yl)tetrazolide (4‐ptz⁻) ligand and an anionic azide ligand. Both Ag⁺ centres are coordinated by four N atoms, forming a distorted tetrahedral coordination environment. When all the component ions are viewed as 4‐connected nodes, the whole three‐dimensional network can be regarded topologically as a new kind of 4,4,4,4‐connected net with the Schläfli symbol (4.8⁵)(4².8⁴)(4³.8³)₂.     

Counterion‐Assisted Shaping of Nanocluster Supracrystals

Ag₄₄(p‐MBA)₃₀^4? (p‐MBA=para‐mercaptobenzoic acid) nanocluster (NC) supracrystals (SCs) with customizable shapes can be obtained by simply altering the type and concentration of the counterions of the p‐MBA ligands in the dimethylsulfoxide (DMSO)/water crystallization system. Changing the counterion of the p‐MBA ligand from H⁺ to Cs⁺ eliminates the directional hydrogen bonds in the SCs, resulting in the packing of deprotonated Ag₄₄(p‐MBA)₃₀^4? NCs into octahedral SCs, which is in stark contrast to the rhombohedral SCs that were formed by the packing of protonated Ag₄₄(p‐MBA)₃₀^4? NCs in previous studies. Furthermore, the double layer of deprotonated Ag₄₄(p‐MBA)₃₀^4? NCs is sensitive to charge screening induced by increasing the Cs⁺ concentration, thereby providing a means to regulate the precipitation kinetics of the Ag₄₄(p‐MBA)₃₀^4? NCs for SC shape engineering. Slow precipitation kinetics was found to favor over‐growth at the corners and edges of the octahedral SC nuclei, shaping the SCs into concave octahedra.     

Switchable Bifunctional Stimuli‐Triggered Poly‐N‐Isopropylacrylamide/DNA Hydrogels

DNA‐tethered poly‐N‐isopropylacrylamide copolymer chains, pNIPAM, that include nucleic acid tethers have been synthesized. They are capable of inducing pH‐stimulated crosslinking of the chains by i‐motif structures or to be bridged by Ag⁺ ions to form duplexes. The solutions of pNIPAM chains undergo crosslinking at pH 5.2 or in the presence of Ag⁺ ions to form hydrogels. The hydrogels reveal switchable hydrogel‐to‐solution transitions by the reversible crosslinking of the chains at pH 5.2 and the separation of the crosslinking units at pH 7.5, or by the Ag⁺ ion‐stimulated crosslinking of the chains and the reverse dissolution of the hydrogel by the cysteamine‐induced elimination of the Ag⁺ ions. The DNA‐crosslinked hydrogels are thermosensitive and undergo reversible temperature‐controlled hydrogel‐to‐solid transitions. The solid pNIPAM matrices are protected against the OH^? or cysteamine‐stimulated dissociation to the respective polymer solutions.     

Long‐life Heavy Metal Ions Sensor Based on Graphene Oxide‐anchored Conducting Polymer

A long‐life electrochemical sensor for the continuous analysis of heavy metal ions (Zn(II), Cd(II), Pb(II), Cu(II), and Hg(II)) was developed using the graphene oxide (GO) anchored‐functionalized polyterthiophene (poly[3′‐(2‐aminopyrimidyl)‐2,2′:5′,2′′‐terthiophene], polyPATT) composite. The PATT monomer was synthesized and polymerized with GO to form the composite using a potential cycling method, followed by Nafion coating. The modified sensor surface was characterized employing electrochemical and surface analysis methods. Experimental variables affecting the analytical performance were optimized. Interference effects of other metal ions having similar redox potentials were also investigated. The performance of chronocoulometry (CC) without predeposition was compared with the results of square wave anodic stripping voltammetry (SWASV) with predeposition. The dynamic range of CC for the target ions were between 1 ppb and 10 ppm, respectively with the detection limits between 0.05 (±0.05) and 0.20 (±0.15) ppb for the CC method without predeposition, and between 0.08 (±0.05) and 0.30 (±0.12) ppb for the SWASV with 300 sec of deposition time (n=3 ). The reliability of the method was evaluated by continuously analysing environmental water samples using a single sensor probe in a flow system for 93 days.     

A H+/Ag+ Dual‐Target Responsive Label‐Free Light‐Up Probe Based on a DNA Triplex

We developed a dual‐target responsive sensor for label‐free light‐up fluorescent detection of protons (H⁺) and silver ions (Ag⁺) using an “OR′′ logic gate. Berberine, a cost‐effective and non‐toxic indicator, partially intercalates the formed triplex DNA in the presence of H⁺ or Ag⁺, generating enhanced fluorescence. The designed Ag⁺ probe has high selectivity and desirable sensitivity, which is necessary for practical use. The robust ”OR“ logic gate is capable of a rapid and reversible response to the H⁺ and/or Ag⁺ inputs.     

A novel one‐dimensional double‐chain‐like ZnII coordination polymer: poly[bis(1‐benzyl‐1H‐imidazole‐κN3)tris(μ‐cyanido‐κ2C:N)(cyanido‐κC)disilver(I)zinc(II)]

One of most interesting systems of coordination polymers constructed from the first‐row transition metals is the porous Zn^II coordination polymer system, but the numbers of such polymers containing N‐donor linkers are still limited. The title double‐chain‐like Zn^II coordination polymer, [Ag₂Zn(CN)₄(C₁₀H₁₀N₂)₂]_n, presents a one‐dimensional linear coordination polymer structure in which Zn^II ions are linked by bridging anionic dicyanidoargentate(I) units along the crystallographic b axis and each Zn^II ion is additionally coordinated by a terminal dicyanidoargentate(I) unit and two terminal 1‐benzyl‐1H‐imidazole (BZI) ligands, giving a five‐coordinated Zn^II ion. Interestingly, there are strong intermolecular Ag^I…Ag^I interactions between terminal and bridging dicyanidoargentate(I) units and C—H…π interactions between the phenyl rings of BZI ligands of adjacent one‐dimensional linear chains, providing a one‐dimensional linear double‐chain‐like structure. The supramolecular three‐dimensional framework is stabilized by C—H…π interactions between the phenyl rings of BZI ligands and by Ag^I…Ag^I interactions between adjacent double chains. The photoluminescence properties have been studied.     

Sensitive and Selective Fluorescent and Colorimetric Sensor for Ag+ Based on the Supramolecular Self‐Assembly in Semi‐Water

Specific recognition of ultratrace levels of ions in semi‐water using super‐quicker methods is still a challenge for environmental monitoring. Herein we report a fluorescent and colormetric sensor ( ZH ) based on supramolecular self‐assembly, whose structure was destroyed by the addition of ultratrace of silver ions. The process promoted either naked eye visible color changes or fluorescence intensity quenched in conjunction with a wide pH range. Systematic studies revealed very high selectivity (0.07 µmol/L) for silver ions, and other common cations, e.g ., Hg²⁺, Cu²⁺, Cd²⁺, Pb²⁺ had nearly no influence on the sensing behavior. This sensor also served as a multiple use of component in sensing materials by addition of I⁻ into the mixture of ZH and Ag⁺ (about 5 times). What's more, ZH containing filter paper emerged distinct color and fluorescence changes upon exposure to silver (Ag⁺), which could be used as a portable method to undertake field testing for Ag ⁺ .