Nucleosides 4: Synthesis of 2′,3′-Didehydro-2′,3′-dideoxydoridosine and 2′,3′-Dideoxydoridosine as Potential Antihypertensive Agents

To measure the hydrophobic character of the ribose moiety of doridosine on the adenosine receptors, 2′,3′-didehydro-2′,3′-dideoxydoridosine (2) and 2′,3′-dideoxydoridosine (3) were prepared. Initial treatment of doridosine with N,N-dimethylformamide diethylacetal, and subsequently with tert-butyldimethylsilyl chloride gave 5. Compound 5 was then reacted with 1,1′-thiocarbonyldiimidazole and the resulting thionocarbonate 6 was heated with triethyl phosphite at 135°C to afford 7. Treatment of compound 7 with tetrabutylammonium fluoride and methanolic ammonia furnished compound 2 in good yield. Compound 2 was subjected to catalytic hydrogenation affording compound 3 in 85% yield.     

Building Functionality into 4′‐Hydrazone Derivatives of 2,2′: 6′,2″‐Terpyridine

The syntheses of the five 2,2′: 6′,2″‐terpyridine (tpy) ligands 5 – 9 functionalized in the 4′‐position with a hydrazone substituent RR′C?N? NH (R=R′=Me; R=H, R′=4‐BrC₆H₄, 4‐O₂NC₆H₄, 4‐MeOC₆H₄, or 3,5‐(MeO)₂C₆H₃) are described. Protonation of the tpy domain of the ligands is facile. Solution behaviour has been studied by NMR and electronic spectroscopies. Representative structural data are presented for neutral and monoprotonated ligands, and illustrate that H‐bonding involving the formal amine NH unit is a dominant structural motif in all cases.     

A Copper(II) Ion‐Selective Potentiometric Sensor Based on N,N′,N″,N′′′‐Tetrakis(2‐pyridylmethyl)‐1,4,8,11‐tetraazacyclotetradecane in PVC Matrix

The simple PVC‐based membrane containing N,N′,N″,N′′′‐tetrakis(2‐pyridylmethyl)‐1,4,8,11‐tetraazacyclotetradecane (tpmc) as an ionophore and dibutyl phthalate as a plasticizer, directly coated on a glassy carbon electrode was examined as a new sensor for Cu²⁺ ions. The potential response was linear within the concentration range of 1.0×10^?1–1.0×10^?6 M with a Nernstian slope of 28.8 mV/decade and detection limit of 7.0×10^?7 M. The electrode was used in aqueous solutions over a wide pH range (1.3–6). The sensor exhibited excellent selectivity for Cu²⁺ ion over a number of cations and was successfully used in its determination in real samples.     

Synthesis and Crystal Structures of O‐2′,3′‐Cyclic Cyclopentanone and Cyclohexanone Ketals of the Cytostatic 5‐Fluorouridine

The synthesis of two O‐2′,3′‐cyclic ketals, i.e., 5 and 6 , of the cytostatic 5‐fluorouridine ( 2 ), carrying a cyclopentane and/or a cyclohexane ring, respectively, is described. The novel compounds were characterized by ¹H‐, ¹⁹F‐, and ¹³C‐NMR, and UV spectroscopy, as well as by elemental analyses. Their crystal structures were determined by X‐ray analysis. Both compounds 5 and 6 show an anti‐conformation at the N‐glycosidic bond which is biased from +ac to +ap compared to the parent nucleoside 2 . The sugar puckering is changed from ^2′E to _3′E going along with a reduction of the puckering amplitude τ_m by ca. 10–13° due to the ketalization. The conformation about the sugar exocyclic bond C(4′)? C(5′) of 5 and 6 remains unchanged, i.e., g⁺, compared with compound 2 .     

A Novel,One‐Pot Four‐Component Route to 2′‐Thioxo‐2′,3′‐dihydrospiro[indole‐3,6′‐[1,3]thiazin]‐2‐one Derivatives

An efficient route to 2′,3′‐dihydro‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives is described. It involves the reaction of isatine, 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one, and different amines in the presence of CS₂ in dry MeOH at reflux (Scheme 1). The alkyl carbamodithioate, which results from the addition of the amine to CS₂, is added to the α,β‐unsaturated ketone, resulting from the reaction between 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one and isatine, to produce the 3′‐alkyl‐2′,3′‐dihydro‐4′‐phenyl‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives in excellent yields (Scheme 2). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.     

Synthesis and photovoltaic investigation of dithieno[2,3‐d:2′,3′‐d′]‐benzo[1,2‐b:3,4‐b′:5,6‐d″]trithiophene‐based conjugated polymer with an enlarged π‐conjugated system

Compared with benzo[1,2‐b:3,4‐b′:5,6‐d″]trithiophene (BTT), an extended π‐conjugation fused ring derivative, dithieno[2,3‐d:2′,3′‐d′]benzo[1,2‐b:3,4‐b′:5,6‐d″]trithiophene (DTBTT) has been designed and synthesized successfully. For investigating the effect of extending conjugation, two wide‐bandgap (WBG) benzo[1,2‐b:4,5‐b′]dithiophene (BDT)‐based conjugated polymers (CPs), PBDT‐DTBTT, and PBDT‐BTT, which were coupled between alkylthienyl‐substituted benzo[1,2‐b:4,5‐b′]dithiophene bistin (BDT‐TSn) and the weaker electron‐deficient dibromides DTBTTBr₂ and BTTBr₂ bearing alkylacyl group, were prepared. The comparison result revealed that the extending of conjugated length and enlarging of conjugated planarity in DTBTT unit endowed the polymer with a wider and stronger absorption, more ordered molecular structure, more planar and larger molecular configuration, and thus higher hole mobility in spite of raised highest occupied molecular orbital (HOMO) energy level. The best photovoltaic devices exhibited that PBDT‐DTBTT/PC₇₁BM showed the power conversion efficiency (PCE) of 2.73% with an open‐circuit voltage (V_OC) of 0.82 V, short‐circuit current density (J_SC) of 6.29 mA cm^?2, and fill factor (FF) of 52.45%, whereas control PBDT‐BTT/PC₇₁BM exhibited a PCE of 1.98% under the same experimental conditions. The 38% enhanced PCE was mainly benefited from improved absorption, and enhanced hole mobility after the conjugated system was extended from BTT to DTBTT. Therefore, our results demonstrated that extending the π‐conjugated system of donor polymer backbone was an effective strategy of tuning optical electronic property and promoting the photovoltaic property in design of WBG donor materials.     

Reactions of N-(N′,N′,N″,N″-tetramethyl)guanidinyl-substituted Phosphines with Organoelement Chlorides involving Phosphorus,Sulfur, and Selenium; Formation of Stable Phosphino-, Thio-, and Selenophosphonium Salts

By reaction of N-(N′,N′,N″,N″-tetramethyl)guanidinyl-substituted phosphines with diorganochlorophosphines, organodichlorophosphines, p-tolylsulfenylchloride and phenylselenylchloride a variety of stable phosphonium chlorides with a P–E (E = P, S, Se) bond were obtained. In one case, performing this reaction in the presence of sodium tetraphenylborate led to the corresponding phosphonium tetraphenylborate. All compounds were characterised by multinuclear NMR and elemental analysis. The selenophosphonium chloride 4 a of the trihydrate was further characterised by a single crystal X-ray analysis. The P–Se bond is very long [193.0(3), 193.3(3) pm in two independent fomula units]. The water molecules and the chloride anions form hydrogen bonded layers.     

Synthese,Struktur und einige Reaktionen [N-(N′,N′,N″,N″-tetramethyl)-guanidinyl]-substituierter Phosphorylverbindungen

Synthesis, Structure, and some Reactions of N-(N′,N′,N″,N″-tetramethyl)guanidinyl-substituted Phosphoryl Compounds The tetramethylguanidinyl-substituted phosphoryl compounds 1 – 10 were prepared in the reaction of the appropriate chlorophosphoryl compounds with either N′,N′,N″,N″-tetramethylguanidine (HTMG) or N-trimethylsilyl-(N′,N′,N″,N″-tetramethyl)guanidine (TMSTMG). With methyl iodide 1 reacted with N-alkylation to give the ammonium salt 11. 1 reacted with BF₃ · Et₂O at both imino nitrogen atoms with formation of the bis-BF₃-adduct 12 . The X-ray structure determination of phenylphosphonic acid-bis(N′,N′,N″,N″-tetramethylguanidinide) 3 shows shortened PN-bonds and widened PNC-angles, consistent with the partial double bond character of the PN-bond.     

Masking of Lewis acidity trends in the solid‐state structures of trichlorido‐ and tribromido(2,2′:6′,2′′‐terpyridine‐κ3N,N′,N′′)gallium(III)

The molecular structures of trichlorido(2,2′:6′,2′′‐terpyridine‐κ³N,N′,N′′)gallium(III), [GaCl₃(C₁₅H₁₁N₃)], and tribromido(2,2′:6′,2′′‐terpyridine‐κ³N,N′,N′′)gallium(III), [GaBr₃(C₁₅H₁₁N₃)], are isostructural, with the Ga^III atom displaying an octahedral geometry. It is shown that the Ga—N distances in the two complexes are the same within experimental error, in contrast to expected bond lengthening in the bromide complex due to the lower Lewis acidity of GaBr₃. Thus, masking of the Lewis acidity trends in the solid state is observed not only for complexes of group 13 metal halides with monodentate ligands but for complexes with the polydentate 2,2′:6′,2′′‐terpyridine donor as well.     

Synthesis and Anti‐HIV Activity of Triazolo‐Fused 2′,3′‐Cyclic Nucleoside Analogs Prepared by an Intramolecular Huisgen 1,3‐Dipolar Cycloaddition

Triazolo‐fused 2′,3′‐cyclic nucleoside analogs were synthesized by an intramolecular 1,3‐dipolar cycloaddition of nucleoside‐derived azido alkynes in a regio‐ and stereospecific manner. The uracil base in these target compounds was successfully transformed to the corresponding cytosine. The synthesized compounds were examined in a MAGI assay for their anti‐HIV activities, and in a H9 T lymphocytes assay for their cell toxicities.     

Two Bulky Conjugated 4′‐(4‐Hydroxyphenyl)‐4,2′:6′,4′′‐terpyridine‐based Layered Complexes: Synthesis,Structure, and Photocatalytic Hydrogen Evolution Activity

Two new layered complexes with the formulas of {[Cu(H₂O)(HL)₂Cl](NO₃)}_n ( 1 ) and {[Cu(H₂O)₂(HL)₂](NO₃)₂}_n ( 2 ) were solvothermally synthesized by the reactions of the bulky conjugated 4′‐(4‐hydroxyphenyl)‐4,2′:6′,4′′‐terpyridine ligand (HL) with different Cu^II salts, which were further used as photocatalysts to achieve hydrogen production from water splitting. Single‐crystal structural analyses reveal that both complexes feature coplanar (4 4) layers with different connection manners between the HL extended Z‐shaped chains. More interestingly, 1 possessing more negative conduction band potential and higher structural stability exhibits a large hydrogen production rate of 2.43 mmol · g^–1 · h^–1, which is four times higher than that of 2 . Thus, the Cu^II‐based coordination polymers modified by the bulky conjugated organic ligand can become potentially promising non‐Pt photocatalysts for hydrogen production from water splitting.     

Approaches to wired terpyridine: Bithienyl alkynyl derivatives of 2,2′:6′,2″-terpyridine and their ruthenium(II) complexes

Two approaches to the formation of ruthenium(II) complexes containing ligands with conjugated 2,2′:6′,2″-terpyridine (tpy), alkynyl and bithienyl units have been investigated. Bromination of 4′-(2,2′-bithien-5′-yl)-2,2′:6′,2″-terpyridine leads to 4′-(5-bromo-2,2’-bithien-5′-yl)-2,2′:6′,2″-terpyridine (1), the single crystal structure of which has been determined. The complexes [Ru(1)₂][PF₆]₂ and [Ru(tpy)(1)][PF₆]₂ have been prepared and characterized. Sonogashira coupling of the bromo-substituent with (TIPS)CCH did not prove to be an efficient method of preparing the corresponding complexes with pendant alkynyl units. The reaction of 4′-ethynyl-2,2′:6’,2″-terpyridine with 5-bromo-2,2′-bithiophene under Sonogashira conditions yielded ligand 2, and the heteroleptic ruthenium(II) complex [Ru(2)(tpy)][PF₆]₂ has been prepared and characterized.     

Proton Nuclear Magnetic Resonance Measurements of 2′-Aminodeoxyuridylyl-3′,5′-Deoxyuridine

A dideoxyribonucleotide, 2′-amino-2′-deoxyuridylyl 3′,5′-deoxyuridine, containing an unsual base (2′-amino-2′-deoxyuridine) that isresistant to nucleases was investigated by ′H NMR. The pK_a of the protonation of the amino group (5.8) was determined by profiles of chemical shifts of protons in the vicinity of amino group versus pH. However, protonation of the amino group has little effect on the conformation of the dimer, assumed to be B-form DNA. This conclusion is drawn from the chemical shift data and coupling constants of H₁-H₂. Thus, 2′-amino-2′-deoxyuridine can be used in antisense and anticode oligonucleotides.     

Structural and theoretical characterization of a new twisted 4′‐substituted terpyridine compound: 4′‐(isoquinolin‐4‐yl)‐2,2′:6′,2′′‐terpyridine

4′‐Substituted derivatives of 2,2′:6′,2′′‐terpyridine with N‐containing heteroaromatic substituents, such as pyridyl groups, might be able to coordinate metal centres through the extra N‐donor atom, in addition to the chelating terpyridine N atoms. The incorporation of these peripheral N‐donor sites would also allow for the diversification of the types of noncovalent interactions present, such as hydrogen bonding and π–π stacking. The title compound, C₂₄H₁₆N₄, consists of a 2,2′:6′,2′′‐terpyridine nucleus (tpy), with a pendant isoquinoline group (isq) bound at the central pyridine (py) ring. The tpy nucleus deviates slightly from planarity, with interplanar angles between the lateral and central py rings in the range 2.24 (7)–7.90 (7)°, while the isq group is rotated significantly [by 46.57 (6)°] out of this planar scheme, associated with a short H_tpy…H_isq contact of 2.32 Å. There are no strong noncovalent interactions in the structure, the main ones being of the π–π and C—H…π types, giving rise to columnar arrays along [001], further linked by C—H…N hydrogen bonds into a three‐dimensional supramolecular structure. An Atoms In Molecules (AIM) analysis of the noncovalent interactions provided illuminating results, and while confirming the bonding character for all those interactions unquestionable from a geometrical point of view, it also provided answers for some cases where geometric parameters are not informative, in particular, the short H_tpy…H_isq contact of 2.32 Å to which AIM ascribed an attractive character.     

Synthesis of new optically active α,α′,β‐trisubstituted‐β‐lactones as monomers for stereoregular biopolyesters

Various optically active (4R)‐alkyloxycarbonyl‐3,3‐dialkyl‐2‐oxetanones as monomers were synthesized from L‐(S)‐malic acid in six steps to prepare a new family of stereopolyesters for biomedical applications. The synthesis began with an esterification followed of a dialkylation in the aim to introduce hydrophobic groups as methyl or reactive group as allyl. Then, a saponification has permitted to obtain the corresponding diacids that reacted with appropriate alcohols to furnish different monoesters. The last and most important step was activation of hydroxyl group of monoesters with the asymmetric carbon configuration inversion according to the Mitsunobu reaction. Thus, this reaction has provided lactones from monoesters with 100% enantiomeric excess which was confirmed by ¹H NMR and by the synthesis of corresponding isotactic and semicrystalline homopolyesters. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2586–2597     

Iodine‐Catalyzed Synthesis of Spiro[1,3,4‐benzotriazepine‐2,3′‐indole]‐2′,5(1H,1′H)‐diones under Mild Conditions

The I₂‐catalyzed preparation of spiro[1,3,4‐benzotriazepine‐2,3′‐indole]‐2′,5(1H,1′H)‐diones from 2‐aminobenzohydrazide and isatins in MeCN at room temperature in good‐to‐excellent yields is described. The structure of 3 was corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS data). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

Tissue distribution and metabolism of the putative cancer chemopreventive agent 3′,4′,5′‐trimethoxyflavonol (TMFol) in mice

3′,4′,5′‐Trimethoxyflavonol (TMFol) is a synthetic flavonol with preclinical cancer chemopreventive properties. The hypothesis was tested that, in mice, p.o. administration of TMFol results in measureable levels of the parent in target tissues. A single oral dose (240 mg/kg) was administered to mice (n = 4 per time point) with time points ranging from 5 to 1440 min. TMFol and its metabolites were identified and quantitated in all tissues by high‐performance liquid chromatography (HPLC). Plasma levels of TMFol were at the limit of quantification or below, although metabolites were identified. Peak levels of TMFol in the gastrointestinal tract and the prostate averaged 1671 ± 265 µg/g (5.3 µmol/g) and 6.0 ± 1.6 µg/g (18.4 nmol/g), and occurred 20 and 360 min post‐dose, respectively. The area under the tissue concentration–time curve (AUC) for TMFol was greater than those of the metabolites, indicating that TMFol is relatively metabolically stable. Micromolar TMFol levels are easily achieved in the prostate and gastrointestinal tract, suggesting that TMFol might exert chemopreventive efficacy at these tissue sites. Further investigations are warranted to elucidate the potential chemopreventive potency of TMFol. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and properties of novel polyimides derived from 2,2′,3,3′‐benzophenonetetracarboxylic dianhydride

A new synthetic route to 2,2′,3,3′‐BTDA (where BTDA is benzophenonetetracarboxylic dianhydride), an isomer of 2,3′,3′,4′‐BTDA and 3,3′,4,4′‐BTDA, is described. Single‐crystal X‐ray diffraction analysis of 2,2′,3,3′‐BTDA has shown that this dianhydride has a bent and noncoplanar structure. The polymerizations of 2,2′,3,3′‐BTDA with 4,4′‐oxydianiline (ODA) and 4,4′‐bis(4‐aminophenoxy)benzene (TPEQ) have been investigated with a conventional two‐step process. A trend of cyclic oligomers forming in the reaction of 2,2′,3,3′‐BTDA and ODA has been found and characterized with IR, NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and elemental analyses. Films based on 2,2′,3,3′‐BTDA/TPEQ can only be obtained from corresponding polyimide (PI) solutions prepared by chemical imidization because those from their polyamic acids by thermal imidization are brittle. PIs from 2,2′,3,3′‐BTDA have lower inherent viscosities and worse thermal and mechanical properties than the corresponding 2,3′,3′,4′‐BTDA‐ and 3,3′,4,4′‐BTDA‐based PIs. PIs from 2,2′,3,3′‐BTDA and 2,3′,3′,4′‐BTDA are amorphous, whereas those from 3,3′,4,4′‐BTDA have some crystallinity, according to wide‐angle X‐ray diffraction. Furthermore, PIs from 2,2′,3,3′‐BTDA have better solubility, higher glass‐transition temperatures, and higher melt viscosity than those from 2,3′,3′,4′‐BTDA and 3,3′,4,4′‐BTDA. Model compounds have been prepared to explain the order of the glass‐transition temperatures found in the isomeric PI series. The isomer effects on the PI properties are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2130–2144, 2004     

Synthesis and Properties of N,N′‐Bis(difuroxano [3,4‐b:3′,4′‐d]phenyl)oxalic Amide

N,N′‐Bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide was synthesized via acylation, nitration, azidation, and pyrolysis‐denitrogenation from the starting materials of oxalyl chloride and 3,5‐dichloroaniline, under mild reaction conditions, with the yields of 81.0%, 82.0%, 86.0% and 81.7% respectively. The title compound and its precursors were characterized by ¹H NMR, IR, MS, and elemental analysis. The title compound has a density of 1.92 g·cm^?3 by a suspension method, a standard formation enthalpy of 979 kJ·mol^?1 calculated by Gaussian programs, a detonation velocity of 8.17 km·s^?1, and a detonation pressure of 31 GPa obtained by Kamlet Equation. The thermal decomposition reactions of the title compound at different heating rates were tested by differential scanning calorimetry (DSC). The kinetics parameters of the pyrolysis of the compound were calculated by Kissinger's method. The values of apparent activation energy (E_a) and pre‐exponential constant (A) were 226.7 kJ·mol^?1 and 10^23.17 s^?1 respectively. It was presupposed that N,N′‐bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide would be a promising high energetic explosive with low sensitivity.     

One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).