Csp2–O and C–C Bond Formation via Pd‐Catalyzed Coupling Reaction of 2,4‐Dichloroquinazoline

An efficient palladium‐catalyzed C–O and subsequent C–C bond formation of 2,4‐dichloroquinazoline have been described. The designed strategy results in the synthesis of novel 2‐arylated quinazolin‐4‐ones framework with various aryl/heteroaryl boronic acids in moderate to good yields along with 2,4‐diarylated quinazolines. This methodology offers a direct transformation of aryl halides to aryl alcohols/ketone as well as the straight forward application to generate a wide variety of monoaryl and diaryl quinazoline.     

Synthesis and characterization of new electroluminescent materials of 1,3,4‐oxadiazole–1,2,3‐triazole hybrids and 1,3,4‐oxadiazole–1,2,3‐triazole–pyridine derivatives

New electroluminescent materials of 1,3,4‐oxadiazole–1,2,3‐triazole and 1,3,4‐oxadiazole–1,2,3‐triazole–pyridine hybrid derivatives were synthesized and characterized. Following spectroscopic studies and characterization of their electronic properties, 1,3,4‐oxadiazole–1,2,3‐triazole hybrids and 1,3,4‐oxadiazole–1,2,3‐triazole–pyridine derivatives were found to be potentially efficient blue electroluminescent materials. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:322–328, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20210     

Fluorocarbon and Hydrocarbon N‐Heterocyclic (C5–C7) Imidazole‐Based Liquid Crystals

By using three synthetic protocols, a series of fluorocarbon and hydrocarbon N‐heterocyclic imidazole‐based liquid crystals (LCs) and related imidazolium‐based ionic liquid crystals (ILCs) have been prepared. The ring size of the N‐heterocycle and the length of the N‐terminal chain (on the imidazolium unit in the ILCs) were modified, and the influence of these structural parameters on liquid‐crystal phases was investigated by means of polarizing optical microscopy (POM), differential scanning calorimetry (DSC), and X‐ray diffraction (XRD). These new ILCs exhibit a disordered smectic phase (SmA), good thermal stabilities, a broad smectic phase range, a high dipole moment, relatively low melting points, but high clearing points and strong emission fluorescence relative to imidazole‐based LCs. These encouraging results have led us to believe these fluorocarbon and hydrocarbon N‐heterocyclic imidazole‐based LCs and related imidazolium‐based ILCs could be used as new liquid‐crystalline materials.     

Iodine‐Catalyzed Highly Diastereoselective Synthesis of trans‐2,6‐Disubstituted‐3,4‐Dihydropyrans: Application to Concise Construction of C28–C37 Bicyclic Core of (+)‐Sorangicin A

A novel iodine‐catalyzed highly diastereoselective synthesis of trans‐2,6‐disubstituted‐3,4‐dihydropyrans have been achieved from δ‐hydroxy α,β‐unsaturated aldehydes by treating with allyltrimethyl silane in THF at room temperature with good to excellent yields. This methodology has been successfully implemented for a concise asymmetric synthesis of C28–C37 dioxabicyclo[3.2.1]octane ring system of (+)‐sorangicin A in 8 steps with 21 % overall yield.     

Three Salts Containing the Fullerene Tetra‐Anion C604– – Synthesis,X‐Ray Single‐Crystal Structure Determination and EPR Investigation

A synthesis for four‐fold negatively charged fullerides in solution is presented. Three salts containing discrete C₆₀^4– anions were synthesized by the reduction of C₆₀ in solution using rubidium‐mercury amalgams and rubidium suboxide both in the presence of elemental mercury. The three new salts, [Rb₆DMF₁₄(C₆H₁₃N₂O₂)₂] · C₆₀ ( 1 ), [Rb(diaza‐18‐crown‐6)]₄ · C₆₀ · (en)_4.1 ( 2 ), and [Rb(benzo‐18‐crown‐6)]₄ · C₆₀ ( 3 ), were characterized by single‐crystal X‐ray diffraction. The results clearly indicate a charge of 4– for the fulleride anions. In 1 the fulleride units are ordered, and their distortion from I_h symmetry shows similarities to binary alkali metal fullerides that contain C₆₀^4– anions. In the crystal structures of 2 and 3 the C₆₀^4– anions show a rotational disorder. In all structures the 6:6 bond lengths within the fulleride are strongly enlarged compared to the ones in neutralC₆₀. EPR measurements reveal a singlet state for the C₆₀^4– anion.     

Lipase‐Catalyzed Dynamic Kinetic Resolution of C1‐ and C2‐Symmetric Racemic Axially Chiral 2,2′‐Dihydroxy‐1,1′‐biaryls

We have discovered that the racemization of configurationally stable, axially chiral 2,2′‐dihydroxy‐1,1′‐biaryls proceeds with a catalytic amount of a cyclopentadienylruthenium(II) complex at 35–50 °C. Combining this racemization procedure with lipase‐catalyzed kinetic resolution led to the first lipase/metal‐integrated dynamic kinetic resolution of racemic axially chiral biaryl compounds. The method was applied to the synthesis of various enantio‐enriched C₁‐ and C₂‐symmetric biaryl diols in yields of up to 98 % and enantiomeric excesses of up to 98 %, which paves the way for new developments in the field of asymmetric synthesis.     

(–)‐epi‐Inosose‐2

The structure of the title compound, C₆H₁₀O₆, was determined to confirm the position of the keto group in the mol­ecule prepared enantioselectively by a bioconversion from myo‐inositol. There are two independent mol­ecules showing similar geometry.     

Synthesis and Absolute Configuration at C(8) of ‘p‐Menthane‐3,8,9‐triol’ Derived from (–)‐Isopulegol

Two diastereoisomers of the new, potentially insecticidal ‘p‐menthane‐3,8,9‐triol’ (=(2S)‐ and (2R)‐ 2‐[(1R,2R,4R)‐2‐hydroxy‐4‐methylcyclohexyl]propane‐1,2‐diol; (8S)‐ and (8R)‐ 1 ), have been synthesized from (–)‐isopulegol by both conventional dihydroxylation and catalytic Sharpless dihydroxylation (Scheme). The absolute configuration at C(8) of the corresponding orthoformate adduct (8S)‐ 3a was determined by ¹H‐NMR and X‐ray crystallographic analysis (Figure).     

Protecting‐group‐free palladium‐catalyzed hydroxylation,C–O and C–N coupling of chiral 6‐bromo‐ and 6,6’‐dibromo‐ 1,1’‐binaphthols

A straightforward, protecting‐group‐free protocol for the synthesis of chiral 6‐substituted and 6,6’‐disubstituted binols (binol = 1,1’‐bi‐2‐naphthol) by palladium‐catalyzed hydroxylation, C–N and C–O coupling of chiral 6‐bromo‐ and 6,6’ ‐dibromo‐1,1’‐binaphthols is developed. The protecting group free palladium‐catalyzed hydroxylation, C–O and C–N cross‐coupling protocol affords a straightforward and general method for the synthesis of chiral 6‐substituted and 6,6’‐disubstituted binols with good yields, avoiding the tedious procedures of introduction and removal of protecting groups. Copyright © 2013 John Wiley & Sons, Ltd.     

Fluorescence Dynamics of Monocyclodextrin– and Bis(thiol‐cyclodextrin)–Coumarin C153 Complexes

The solvation and confinement of coumarin C153 within supramolecular host/guest complexes based on β‐cyclodextrin (β‐CD) and 6‐deoxy‐6‐thio‐β‐cyclodextrin (β‐CD‐SH) in water are studied by fluorescence spectroscopy. For β‐CD/C153, the 1:1 complex is proposed, and for β‐CD‐SH/C153 both the 1:1 and 2:1 complexes are believed to be formed. The 2:1 β‐CD‐SH/C153 complex has an association constant of 4.2×10⁵ M ^?1 and a C153 population of 82 %, which are interestingly high values, indicating that the proposed β‐CD‐SH dimers structure are connected by covalent disulfide bonds; this is supported by mass spectrometry. Solvation related to fast hydrogen‐bond rearrangement as a part of fluorescence relaxation is determined by the ultrafast components of time‐resolved spectroscopy to be 3 and 7 ps for the 1:1 β‐CD/C153 and 2:1 β‐CD‐SH/C153 complexes, respectively.     

Barium(II)–2,4‐dinitrophenolate–18‐crown‐6 at 183 K

The title compound, bis(2,4‐dinitrophenolato‐κ²O,O′)(1,4,7,10,13,16‐hexaoxadecane‐κ⁶O)barium(II), [Ba(C₆H₃N₂O₅)₂(C₁₂H₂₄O₆)], is a 1:1 complex of barium(II)–2,4‐di­nitro­phenolate and 1,4,7,10,13,16‐hexaoxa­cyclo­octa­decane (18‐crown‐6). Its structure is located on a crystallographic inversion centre. The temperature dependence of the crystal structure has been studied. The monoclinic β angle of the P2₁/­n space group increases with increasing temperature. The packing structure of the complex is stabilized by intermolecular C—H?O interactions.     

1,2‐Diaza‐3‐silacyclopent‐5‐ene – Synthese und Reaktionen

1,2‐Diaza‐3‐silacyclopent‐5‐ene – Synthesis and Reactions The dilithium salt of bis(tert‐butyl‐trimethylsilylmethylen)ketazine ( 1 ) forms an imine‐enamine salt. 1 reacts with halosilanes in a molar ratio of 1:1 to give 1,2‐diaza‐3‐silacyclopent‐5‐enes. Me₃SiCH=CCMe₃ [N(SiR,R′)‐N=C‐C]HSiMe₃ ( 2 ‐ 7 ). ( 2 : R,R′ = Cl; 3 : R = CH₃, R′ = Ph; 4 : R = F, R′ = CMe₃; 5 : R = F, R′ = Ph; 6 : R = F, R′ = N(SiMe₃)₂; 7 : R = F, R′ = N(CMe₃)SiMe₃). In the reaction of 1 with tetrafluorosilane the spirocyclus 8 is isolated. The five‐membered ring compounds 2 ‐ 7 and compound 9 substituted on the silicon‐fluoro‐ and (tert‐butyltrimethylsilyl) are acid at the C(4)‐atom and therefore can be lithiated. Experiments to prepare lithium salts of 4 with MeLi, n‐BuLi and PhLi gave LiF and the substitution‐products 10 ‐ 12 . 9 forms a lithium salt which reacts with ClSiMe₃ to give LiCl and the SiMe₃ ring system ( 13 ) substituted at the C(4)‐atom. The ring compounds 3 ‐ 7 and 10 ‐ 12 form isomers, the formation is discussed. Results of the crystal structure and analyses of 8 , 10 , 12 , and 13 are presented.     

Biocatalytic Approach for the Total Synthesis of (–)‐Malyngolide and Its C(5)‐Epimer

An enzymatic approach has been successfully utilized in the total synthesis of (–)‐malyngolide and its C(5)‐epimer. The required configuration was established by an enzymatic kinetic resolution and Sharpless asymmetric dihydroxylation.