Synthesis and characterization of ABA‐type amphiphilic tri‐block copolymers through anionic polymerization using end functionalized poly(ethylene oxide) oligomers

ABA‐type amphiphilic tri‐block copolymers were successfully synthesized from poly(ethylene oxide) derivatives through anionic polymerization. When poly(styrene) anions were reacted with telechelic bromine‐terminated poly(ethylene oxide) ( 1 ) in 2:1 mole ratio, poly(styrene)‐b‐poly(ethylene oxide)‐b‐poly(styrene) tri‐block copolymers were formed. Similarly, stable telechelic carbanion‐terminated poly(ethylene oxide), prepared from 1,1‐diphenylethylene‐terminated poly (ethylene oxide) ( 2 ) and sec‐BuLi, was also used to polymerize styrene and methyl methacrylate separately, as a result, poly (styrene)‐b‐poly(ethylene oxide)‐b‐poly(styrene) and poly (methyl methacrylate)‐b‐poly(ethylene oxide)‐b‐poly(methyl methacrylate) tri‐block copolymers were formed respectively. All these tri‐block copolymers and poly(ethylene oxide) derivatives, 1 and 2 , were characterized by spectroscopic, calorimetric, and chromatographic techniques. Theoretical molecular weights of the tri‐block copolymers were found to be similar to the experimental molecular weights, and narrow polydispersity index was observed for all the tri‐block copolymers. Differential scanning calorimetric studies confirmed the presence of glass transition temperatures of poly(ethylene oxide), poly(styrene), and poly(methyl methacrylate) blocks in the tri‐block copolymers. Poly(styrene)‐b‐poly(ethylene oxide)‐b‐poly(styrene) tri‐block copolymers, prepared from polystyryl anion and 1 , were successfully used to prepare micelles, and according to the transmission electron microscopy and dynamic light scattering results, the micelles were spherical in shape with mean average diameter of 106 ± 5 nm. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis,characterization, and micellization studies of coil‐rod‐coil and ABA ruthenium(II) terpyridine assemblies with π‐conjugated electron acceptor systems

A series of Ru^II heterodinuclear complexes of ABA ‐type with electron‐deficient bis‐terpyridines as building blocks was synthesized by (R‐tpy)Ru^IIICl₃ complexation. These compounds were characterized by NMR spectroscopy, MALDI‐TOF, ESI‐TOF mass spectrometry, and elemental analysis. The results were compared with a coil‐rod‐coil Ru^II metallo‐supramolecular copolymer, which was synthesized by bis‐complex formation between a hydrophilic ω‐terpyridine poly(ethylene glycol) Ru^II mono‐complex and a hydrophobic bis‐terpyridine‐functionalized rigid core. This amphiphilic Ru^II triblock copolymer showed self‐assembly to clusters and micelles in aqueous solution, which was studied by transmission electron microscopy and dynamic light scattering. Applying velocity sedimentation experiments the number of amphiphilic Ru^II ABA triblock copolymer molecules within the micelles could be estimated. Finally, the photophysical properties of the Ru^II supramolecular assemblies were investigated by UV–vis spectroscopy. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation of Cross‐Linked Micelles from Glycidyl Methacrylate Based Block Copolymers and Their Usages as Nanoreactors in the Preparation of Gold Nanoparticles

This study reports the synthesis of poly(ethylene glycol)methyl ether‐block‐poly(glycidyl methacrylate) (MPEG‐b‐PGMA) diblock, and poly(ethylene glycol)methyl ether‐block‐poly(glycidyl methacrylate)‐block‐poly(methyl methacrylate) (MPEG‐b‐PGMA‐b‐PMMA) triblock copolymers via atom transfer radical polymerization and their self‐assembly behaviors in aqueous media by using acetone as cosolvent. These block copolymers formed near monodisperse core–shell micelles having cross‐linkable cores. Two types of cross‐linked micelles, namely spherical MPEG‐b‐PGMA core cross‐linked (CCL) micelles and MPEG‐b‐PGMA‐b‐PMMA interlayer cross‐linked (ILCL) micelles, were also successfully prepared from these block copolymers by using various bifunctional cross‐linkers such as hexamethylenediamine (HMDA), ethylenediamine (EDA), and 2‐aminoethanethiol (AET). Cross‐linking was successfully carried out via ring‐opening reactions of epoxy residues of hydrophobic‐cores with primary amine or thiol groups of bifunctional cross‐linkers. Finally, these cross‐linked micelles were successfully used as nanoreactors in the synthesis of gold nanoparticles (AuNPs) in aqueous media. Both CCL and ILCL micelles were found to be good stabilizers for AuNPs in aqueous media. Both CCL‐ and ILCL‐stabilized AuNP dispersions were stable for a long time without any size changes and flocculation at room temperature. These cross‐linked stabilized AuNPs exhibited good catalytic activities in the reduction of p‐nitrophenol. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 514–526.     

Facile Fabrication of Multistimuli‐Responsive Metallo‐Supramolecular Core Cross‐Linked Block Copolymer Micelles

Metallo‐supramolecular core cross‐linked (CCL) micelles are fabricated from terpyridine‐functionalized double hydrophilic block copolymers, poly(2‐(2‐methoxyethoxy)ethyl methacrylate)‐b‐poly(2‐(diethylamino)ethyl methacrylate‐co‐4′‐(6‐methacryloxyhexyloxy)‐2,2′:6′,2″‐terpyridine) [PMEO₂MA‐b‐P(DEA‐co‐TPHMA)] via the formation of bis(terpyridine)ruthenium(II) complexes. These metallo‐supramolecular CCL micelles exhibit not only high structural integrity under different pH values and temperatures in aqueous solution, but multistimuli responsiveness including pH‐responsive cores, thermo‐responsive shells, and reversible dissociation of bis(terpyridine)ruthenium(II) complexes upon addition of competitive metal ion chelator, which allows for precisely controlled release of the encapsulated hydrophobic guest molecules via the combination of different stimuli.

     

Dynamic light scattering and cryogenic transmission electron microscopy investigations on metallo-supramolecular aqueous micelles: evidence of secondary aggregation

Metallo-supramolecular diblock copolymers consisting of a polystyrene (PS) block connected to a poly(ethylene oxide) (PEO) block by a bis(terpyridine)ruthenium complex (PS₂₀-[Ru]-PEO _y ) were used to prepare aqueous micelles. The length of the PS block was kept constant, while two PEOs of different molecular weight were used. The resulting hydrated micelles and aggregates were characterized by a combination of cryogenic transmission electron microscopy (cryo-TEM) and dynamic light scattering measurements. The results were compared to those obtained for a covalent counterpart (PS₂₂-b-PEO₇₀). Cryogenic transmission electron microscopy allowed visualization of the PS core of the micelles. Moreover, the aggregates result from clustering of individual micelles.     

Synthesis of PEG‐PNIPAM‐PLys hetero‐arm star polymer and its variation of thermo‐responsibility after the formation of polyelectrolyte complex micelles with PAA

A hetero‐arm star polymer, poly(ethylene glycol)‐poly(N‐isopropylacrylamide)‐poly(L‐lysine) (PEG‐PNIPAM‐PLys), was synthesized by “clicking” the azide group at the junction of PEG‐b‐PNIPAM diblock copolymer with the alkyne end‐group of poly(L‐lysine) (PLys) homopolymer via 1,3‐dipolar cycloaddition. The resultant polymer was characterized by gel permeation chromatography, proton nuclear magnetic resonance, and Fourier transform infrared spectroscopes. Surprisingly, the PNIPAM arm of this hetero‐arm star polymer nearly lose its thermal responsibility. It is found that stable polyelectrolyte complex micelles are formed when mixing the synthesized polymer with poly(acrylic acid) (PAA) in water. The resultant polyelectrolyte complex micelles are core‐shell spheres with the ion‐bonded PLys/PAA chains as core and the PEG and PNIPAM chains as shell. The PNIPAM shell is, as expected, thermally responsive. However, its lower critical solution temperature is shifted to 37.5 °C, presumably because of the existence of hydrophilic components in the micelles. Such star‐like PEG‐PNIPAM‐PLys polymer with different functional arms as well as its complexation with anionic polymers provides an excellent and well‐defined model for the design of nonviral vectors to deliver DNA, RNA, and anionic molecular medicines. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1450–1462, 2009     

Metallo‐supramolecular block copolymer micelles: Improved preparation and characterization

Micelles prepared from amphiphilic block copolymers in which a poly(styrene) segment is connected to a poly(ethylene oxide) block via a bis‐(2,2′:6′,2″‐terpyridine‐ruthenium) complex have been intensely studied. In most cases, the micelle populations were found to be strongly heterogeneous in size because of massive micelle/micelle aggregation. In the study reported in this article we tried to improve the homogeneity of the micelle population. The variant preparation procedure developed, which is described here, was used to prepare two “protomer”‐type micelles: PS₂₀‐[Ru]‐PEO₇₀ and PS₂₀‐[Ru]‐PEO₃₇₅. The dropwise addition of water to a solution of the compounds in dimethylformamide was replaced by the controlled addition of water by a syringe pump. The resulting micelles were characterized by sedimentation velocity and sedimentation equilibrium analyses in an analytical ultracentrifuge and by transmission electron microscopy of negatively stained samples. Sedimentation analysis showed virtually unimodal size distributions, in contrast to the findings on micelles prepared previously. PS₂₀‐[Ru]‐PEO₇₀ micelles were found to have an average molar mass of 318,000 g/mol (corresponding to 53 protomers per micelle, which is distinctly less than after micelle preparation by the standard method) and an average hydrodynamic diameter (d_h) of 18 nm. For PS₂₀‐[Ru]‐PEO₃₇₅ micelles, the corresponding values were M = 603,000 g/mol (31 protomers per micelle) and d_h = 34 nm. The latter particles were found to be identical to the “equilibrium” micelles prepared in pure water. Both micelle types had a very narrow molar mass distribution but a much broader distribution of s values and thus of hydrodynamic diameters. This indicates a conformational heterogeneity that is stable on the time scale of sedimentation velocity analysis. The findings from electron microscopy were in disagreement with those from the sedimentation analysis both in average micelle diameter and in the width of the distributions, apparently because of imperfections in the staining procedure. The preparation procedure described also may be useful in micelle formation from other types of protomers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4458–4465, 2004     

Polyion complex micelles formed from glucose oxidase and comb‐type polyelectrolyte with poly(ethylene glycol) grafts

The comb‐type polyelectrolyte, poly(ethylene glycol)‐graft‐poly(allyl amine) (PEG‐g‐PAA), was synthesized to prepare polyion complex (PIC) micelles with Aspergillus Niger Glucose oxidase (GOD). Even after mixing GOD and PEG‐g‐PAAs with various PEG contents, the resulting mixtures remained transparent but the mixture of GOD and PAA homopolymer immediately precipitated. In the mixtures prepared with a stoichiometric mixing ratio, the formation of PIC micelles with a core‐shell structure was suggested from dynamic and static light scattering measurements. Glucose, the substrate for GOD, could easily diffuse into the PIC micelles, and the GOD molecules were active even in the core of the PIC micelles. GOD didn't lose its enzymatic activity through entrapment into the PIC micelles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3842–3852, 2008     

Cancer‐associated pH‐responsive tetracopolymeric micelles composed of poly(ethylene glycol)‐b‐poly(L‐histidine)‐b‐poly(L‐lactic acid)‐b‐poly(ethylene glycol)

To create a novel vector for specifically delivering anticancer therapy to solid tumors, we used diafiltration to synthesize pH‐sensitive polymeric micelles. The micelles, formed from a tetrablock copolymer [poly(ethylene glycol)‐b‐poly(L ‐histidine)‐b‐poly(L ‐lactic acid)‐b‐poly(ethylene glycol)] consisted of a hydrophobic poly(L ‐histidine) (polyHis) and poly(L ‐lactic acid) (PLA) core and a hydrophilic poly(ethylene glycol) (PEG) shell, in which we encapsulated the model anticancer drug doxorubicin (DOX). The robust micelles exhibited a critical micellar concentration (CMC) of 2.1–3.5 µg/ml and an average size of 65–80 nm pH 7.4. Importantly, they showed a pH‐dependent micellar destabilization, due to the concurrent ionization of the polyHis and the rigidity of the PLA in the micellar core. In particular, the molecular weight of PLA block affected the ionization of the micellar core. Depending on the molecular weight of the PLA block, the micelles triggering released DOX at pH 6.8 (i.e. cancer acidic pH) or pH 6.4 (i.e. endosomal pH), making this system a useful tool for specifically treating solid cancers or delivering cytoplasmic cargo in vivo. Copyright © 2008 John Wiley & Sons, Ltd.     

Hierarchically organized micellization of thermoresponsive rod‐coil copolymers based on poly[oligo(ethylene glycol) methacrylate] and poly(ε‐caprolactone)

A series of amphiphilic triblock copolymers, poly[oligo(ethylene glycol) methacrylate]_x‐block‐poly(ε‐caprolactone)‐block‐poly[oligo(ethylene glycol) methacrylate]_x, POEGMA_Co(x), were synthesized. Formation of hydrophobic domains as cores of the micelles was studied by fluorescence spectroscopy. The critical micelle concentrations in aqueous solution were found to be in the range of circa 10^?6 M. A novel methodology by modulated temperature differential scanning calorimetry was developed to determine critical micelle temperature. A significant concentration dependence of cmt was found. Dynamic light scattering measurements showed a bidispersed size distribution. The micelles showed reversible dispersion/aggregation in response to temperature cycles with lower critical solution temperature between 75 and 85 °C. The interplay of the two hydrophobic and one thermoresponsive macromolecular chains offers the chance to more complex morphologies. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Dual‐responsive supramolecular inclusion complexes of block copolymer poly(ethylene glycol)‐block‐poly[(2‐dimethylamino)ethyl methacrylate] with α‐cyclodextrin

A new class of temperature and pH dual‐responsive and injectable supramolecular hydrogel was developed, which was formed from block copolymer poly(ethylene glycol)‐block‐poly[(2‐dimethylamino)ethyl methacrylate] (PEG‐b‐PDMAEMA) and α‐cyclodextrin (α‐CD) inclusion complexes (ICs). The PEG‐b‐PDMAEMA diblock copolymers with different ratio of ethylene glycol (EG) to (2‐dimethylamino)ethyl methacrylate (DMAEMA) (102:46 and 102:96, respectively) were prepared by atom transfer radical polymerization (ATRP). ¹H NMR measurement indicated that the ratio of EG unit to α‐CD in the resulted ICs was higher than 2:1. Thermal analysis showed that thermal stability of ICs was improved. The rheology studies showed that the hydrogels were temperature and pH sensitive. Moreover, the hydrogels were thixotropic and reversible. The self‐assembly morphologies of the ICs in different pH and ionic strength environment were studied by transmission electron microscopy. The formed biocompatible micelles have potential applications as biomedical and stimulus‐responsive material. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2143–2153, 2010     

Synthesis of branch‐ring‐branch tadpole‐shaped [linear‐poly(ε‐caprolactone)]‐b‐[cyclic‐poly(ethylene oxide)]‐b‐ [linear‐poly(ε‐caprolactone)] by combination of glaser coupling reaction with ring‐opening polymerization

A novel amphiphilic branch‐ring‐branch tadpole‐shaped [linear‐poly(ε‐caprolactone)]‐b‐[cyclic‐poly(ethylene oxide)]‐b‐[linear‐poly(ε‐caprolactone)] [(l‐PCL)‐b‐(c‐PEO)‐b‐(l‐PCL)] was synthesized by combination of glaser coupling reaction with ring‐opening polymerization (ROP) mechanism. The self‐assembling behaviors of (l‐PCL)‐b‐(c‐PEO)‐b‐(l‐PCL) and their π‐shaped analogs of poly(ε‐caprolactone)/poly(ethylene oxide)]‐b‐poly(ethylene oxide)‐b‐[poly(ε‐caprolactone)/poly(ethylene oxide) with comparable molecular weight in water were preliminarily investigated. The results showed that the micelles formed from the former took a fiber look, however, that formed from the latter took a spherical look. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Self‐assembly of amphiphilic tris(2,2′‐bipyridine)ruthenium‐cored star‐shaped polymers

Amphiphilic tris(2,2′‐bipyridine)ruthenium‐cored star‐shaped polymers consisting of one polystyrene block and two poly(N‐isopropylacrylamide) blocks were prepared by the “arm‐first” method in which RAFT polymerization and nonconvalent ligand–metal complexation were employed. The prepared amphiphilic star‐shaped metallopolymers are able to form micelles in water. The size and distribution of the micelles were studied by dynamic light scattering and transmission electron microscopy techniques. Preliminary studies indicate that the polymer concentration and the hydrophilic poly(N‐isopropylacrylamide) block length can affect the morphologies of the formed metal‐interfaced core–shell micelles in water. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4204–4210, 2007     

Spherical and Worm‐Like Micelles from Fructose‐Functionalized Polyether Block Copolymers

This paper presents the synthesis and characterization of d ‐fructose modified poly(ethylene glycol) (Fru‐PEG) and fructose modified poly(ethylene glycol)‐block‐poly(ethyl hexyl glycidyl ether) (Fru‐PEG‐b‐PEHG) that are both prepared by initiation with isopropyliden protected fructose, followed by deprotection of the sugar. The block copolymers are self‐assembled into micelles, and are subsequently characterized by cryo‐TEM and dynamic light scattering. The fluorescent dye Nile red is encapsulated as a model hydrophobic compound and fluorescent marker to perform initial uptake tests with breast cancer cells. The uptake of sugar and nonsugar decorated micelles is compared.     

Photo‐responsive amphiphilic poly(α‐hydroxy acids) with pendent o‐nitrobenzyl ester constructed via copper‐catalyzed azide‐alkyne cycloaddition reaction

Photo‐responsive block copolymer mPEG‐b‐poly(Tyr)‐g‐NB was prepared by introduction of o‐nitrobenzyl ester group into the side chain of amphiphilic poly(ethylene glycol)‐b‐poly(α‐hydroxy acids) (mPEG‐b‐poly(Tyr)) containing pendent alkynyl group via copper‐catalyzed azide‐alkyne cycloaddition reaction. The amphiphilic mPEG‐b‐poly(Tyr) was synthesized via the ring‐opening polymerization of O‐carboxyanhydrides, with monomethoxy poly(ethylene glycol) (mPEG) as macroinitiator. The molecular structure, self‐assembly, and photo‐controlled release of the obtained mPEG‐b‐poly(Tyr)‐g‐NB were thoroughly investigated. mPEG‐b‐poly(Tyr)‐g‐NB could self‐assemble into spherical micelles in water and showed disassembly under UV light irradiation, which was demonstrated by means of UV‐vis spectroscopy, scan electron microscopes, and dynamic light scattering measurement. Fluorescence emission measurements demonstrated that Nile red, encapsulated by micelles, can be released upon UV irradiation. This study provides a convenient way to construct smart poly(α‐hydroxy acids)‐based nanocarriers for controlled release of hydrophobic drugs. Copyright © 2015 John Wiley & Sons, Ltd.     

Surface Stabilization of Diblock PEG‐PLGA Micelles by Polymerization of N‐Vinyl‐2‐pyrrolidone

This paper presents a new approach to improving the physical stability of biodegradable poly‐(ethylene glycol)‐block‐poly[(DL ‐lactic acid)‐co‐(glycolic acid)] (PEG‐PLGA) micelles. A hydroxyl‐terminated PEG monomethacrylate (PEGmer) macroinitiator was used to prepare a methacrylate‐end‐capped PEG‐PLGA diblock copolymer by the ring‐opening polymerization of D ,L ‐lactide and glycolide. The surface‐exposed methacrylate groups in the shell layer of the micelles can be polymerized with N‐vinyl‐2‐pyrrolidone. The resulting micelles show substantially enhanced stability.     

Self‐Assembly of Poly(γ‐benzyl L‐glutamate)‐graft‐Poly(ethylene glycol) and Its Mixtures with Poly(γ‐benzyl L‐glutamate) Homopolymer

Summary: Self‐association behaviors of poly(γ‐benzyl L ‐glutamate)‐graft‐poly(ethylene glycol) (PBLG‐graft‐PEG) and its mixtures with PBLG homopolymer in aqueous media were investigated by fluorescence spectroscopy, transmission electron microscopy (TEM), and nuclear magnetic resonance (NMR) spectroscopy. It was revealed that PBLG‐graft‐PEG could self‐assemble to form polymeric micelles with a core‐shell structure in the shape of spindle. The introduction of PBLG homopolymer not only decreases the critical micelle concentration, but also changes the morphology of the micelles.

The excitation fluorescence spectra of pyrene as a function of concentrations for the mixture of PBLG‐graft‐PEG with PBLG and a TEM image of the formed micelles.     

PPEGMEA‐g‐PDEAEMA: Double hydrophilic double‐grafted copolymer stimuli‐responsive to both pH and salinity

A series of well‐defined double hydrophilic double‐grafted copolymers, consisting of polyacrylate backbone, hydrophilic poly(2‐(diethylamino)ethyl methacrylate) and poly(ethylene glycol) side chains, were synthesized by successive atom transfer radical polymerization. The backbone, poly[poly(ethylene glycol) methyl ether acrylate] (PPEGMEA) comb copolymer, was firstly prepared by ATRP of PEGMEA macromonomer via the grafting‐through route followed by reacting with lithium diisopropylamide and 2‐bromopropionyl chloride to give PPEGMEA‐Br macroinitiator of ATRP. Finally, poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(2‐(diethylamino)ethyl methacrylate) graft copolymers were synthesized by ATRP of 2‐(diethylamino)ethyl methacrylate using PPEGMEA‐Br macroinitiator via the grafting‐from route. Poly(2‐(diethylamino)ethyl methacrylate) side chains were connected to polyacrylate backbone through stable C? C bonds instead of ester connections, which is tolerant of both acidic and basic environment. The molecular weights of both backbone and side chains were controllable and the molecular weight distributions kept relatively narrow (M_w/M_n ≤ 1.39). The results of fluorescence spectroscopy, dynamic laser light scattering and transmission electron microscopy showed this double hydrophilic copolymer was stimuli‐responsive to both pH and salinity. It can aggregate to form reversible micelles in basic surroundings which can be conveniently dissociated with the addition of salt at room temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3142–3153, 2009     

Poly(l‐glutamic acid)‐based micellar hydrogel with improved mechanical performance and proteins loading

Soft tissues, such as fat and skin, present high flexibility and are capable of withstanding large deformation in various functions. Hydrogels that can resemble the mechanical performance of soft tissue are unique and widely demanded. In this study, micellar hydrogels based on biocompatible poly(l ‐glutamic acid) (PLGA) were designed with the enhanced capacity to bear large deformation. Amphipathic triblock copolymer poly(ethylene glycol) acrylate‐co‐poly(ε‐caprolactone)‐co‐poly (ethylene glycol) acrylate (APEG‐PCL‐APEG) with two terminal double bonds was synthesized and self‐assembled into micelles. At the same time, graft copolymers, poly(l ‐glutamic acid)‐g‐hydroxyethyl methacrylate (PLGA‐g‐HEMA) with double bonds were synthesized. APEG‐PCL‐APEG micelles and PLGA‐g‐HEMA were mixed to construct micellar hydrogel via radical polymerization. The crystalline structure and hydrophobic aggregation of copolymers (APEG‐PCL‐APEG) were found to associate with PCL molecular weight. Due to the hydrophobic stress dissipation and crystalline structure of the micelles, the softness and toughness of hydrogels were promoted, exhibiting a 25% increase in ultimate strain. Moreover, the micellar hydrogels were able to load proteins with long‐term retention. In addition, under dynamic mechanical stimulation, the release of proteins could be accelerated. Besides, the micellar hydrogels also supported rabbit adipose‐derived stem cells (rASCs) growth, thus exhibiting the potential toward soft tissue engineering. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1115–1125     

Synthesis,Self‐Assembly,and Multi‐Stimuli Responses of a Supramolecular Block Copolymer

A supramolecular block copolymer is prepared by the molecular recognition of nucleobases between poly(2‐(2‐methoxyethoxy)ethyl methacrylate‐co‐oligo(ethylene glycol) methacrylate)‐SS‐poly(ε‐caprolactone)‐adenine (P(MEO₂MA‐co‐OEGMA)‐SS‐PCL‐A) and uracil‐terminated poly(ethylene glycol) (PEG‐U). Because the block copolymer is linked by the combination of covalent (disulfide bond) and noncovalent (A U) bonds, it not only has similar properties to conventional covalently linked block copolymers but also possesses a dynamic and tunable nature. The copolymer can self‐assemble into micelles with a PCL core and P(MEO₂MA‐co‐OEGMA)/PEG shell. The size and morphologies of the micelles/aggregates can be adjusted by altering the temperature, pH, salt concentration, or adding dithiothreitol (DTT) to the solution. The controlled release of Nile red is achieved at different environmental conditions.