Influence of surfactants on the adsorption and elektrokinetic properties of the system: guar gum/manganese dioxide

The adsorption of non-ionic polysaccharide—guar gum (GG) in the presence or absence of the surfactants: anionic SDS, cationic CTAB, nonionic TX-100 and their equimolar mixtures SDS/TX-100, CTAB/TX-100 from the electrolyte solutions (NaCl, CaCl₂) on the manganese dioxide surface (MnO₂) was studied. The increase of GG adsorption amount in the presence of surfactants was observed in every measured system. This increase results from formation of complexes between the GG and the surfactant molecules. This observation was confirmed by the determination of the influence of GG on surfactants adsorption on the MnO₂ surface. The increase of GG adsorption on MnO₂ was the largest in the presence of the surfactant mixtures (CTAB/TX-100; SDS/TX-100) which is the evidence of the synergetic effect. The smallest amounts of adsorption were obtained in the presence of TX-100, which results from non-ionic character of this surface active agent. In the case of single surfactant solution CTAB has the best efficiency in increasing the amount of GG adsorption on MnO₂ which results from strong interactions with GG and also with the negatively charged surface of the adsorbent. In order to determine the electrokinetic properties of the system, the surface charge density of MnO₂ and the zeta potential measurements were performed in the presence of the GG macromolecules and the above mentioned surfactants and their mixtures. The obtained data showed that the adsorption of GG or GG/surfactants complexes on the manganese dioxide surface strongly influences the diffused part of the electrical double layer (EDL)—MnO₂/electrolyte solution, but has no influence on the compact part of the electric double layer. This is the evidence that the polymers chains are directly bonded with the surface of the solid and the surfactants molecules are present in the upper part of the EDL.     

Kinetics of metribuzin degradation by colloidal manganese dioxide in absence and presence of surfactants

The kinetics of the degradation of metribuzin by water-soluble colloidal MnO₂ in acidic medium (HClO₄) were studied spectrophotometrically in the absence and presence of surfactants. The experiments were performed under pseudo-first-order reaction conditions in respect of MnO₂. The degradation was observed to be of the first order in respect of MnO₂ while of fractional order for both metribuzin and HClO₄. The rate constant for the degradation of metribuzin was observed to decrease as the concentration of MnO₂ increased. The anionic surfactant, sodium dodecyl sulphate (SDS), was observed to be ineffective whereas the non-ionic surfactant, Triton X-100 (TX-100), accelerated the reaction rate. However, the cationic surfactant, cetyltrimethyl ammonium bromide (CTAB), caused flocculation with oppositely-charged colloidal MnO₂; hence further study was not possible. The catalytic effect of TX-100 was discussed in the light of the available mathematical model. The kinetic data were exploited to generate the various activation parameters for the oxidative degradation of metribuzin by colloidal MnO₂ in the absence as well as the presence of the non-ionic surfactant, TX-100.     

Adsorption and elektrokinetic properties of the system: carboxymethylcellulose/manganese oxide/surfactant

The adsorption of carboxymethylcellulose (CMC) in the presence of the surfactants: anionic SDS, nonionic polyethylene glycol p-(1,1,3,3-tetramethylbutyl)-phenyl ether (Triton X-100) and their mixtures SDS/polyethylene glycol p-(1,1,3,3-tetramethylbutyl)-phenyl ether with different molar ratios (1:1; 1:3 and 3:1) from the electrolyte solutions (NaCl, CaCl₂) on the manganese dioxide surface (MnO₂) was studied. In every measured system the increase of CMC adsorption in the presence of surfactants was observed. This increase was the smallest in the presence of SDS, a bit larger in the presence of polyethylene glycol p-(1,1,3,3-tetramethylbutyl)-phenyl ether and the largest when the mixtures of SDS/polyethylene glycol p-(1,1,3,3-tetramethylbutyl)-phenyl ether were used. Among the measured mixtures, the mixture of SDS/polyethylene glycol p-(1,1,3,3-tetramethylbutyl)-phenyl ether with the molar ratio 1:3 caused the largest increase of CMC adsorption amount. These results are a consequence of formation of complexes between the carboxymethylcellulose macromolecules and the surfactant molecules. In order to determine the electrokinetic properties of the system the surface charge density of MnO₂ and the zeta potential measurements were conducted in the presence of the CMC macromolecules and the surfactants. The obtained data showed that the adsorption of CMC or CMC/surfactants complexes on the manganese dioxide surface strongly influences the structure of the electric double layer MnO₂/electrolyte solution.     

Kinetics of colloidal MnO<Subscript>2</Subscript> reduction by L-arginine in absence and presence of surfactants

The kinetics of the oxidation of L-arginine by water-soluble form of colloidal manganese dioxide has been studied using visible spectrophotometry in aqueous as well as micellar media. To obtain the rate constants as functions of [L-arginine], [MnO₂] and [HClO₄], pseudo-first-order conditions are maintained in each kinetic run. The first-order-rate is observed with respect to [MnO₂], whereas fractional-order-rates are determined in both [L-arginine] and [HClO₄]. Addition of sodium pyrophosphate and sodium fluoride enhanced the rate of the reaction. The effect of externally added manganese(II) sulphate is complex. It is not possible to predict the exact dependence of the rate constant on manganese(II) concentration, which has a series of reactions with other reactants. The anionic surfactant SDS neither catalyzed nor inhibited the oxidation reaction, while in presence of cationic surfactant CTAB the reaction is not possible due to flocculation of reaction mixture. The reaction is catalyzed by the nonionic surfactant TX-100 which is explained in terms of the mathematical model proposed by Tuncay et al. Activation parameters have been evaluated using Arrhenius and Eyring equations. On the basis of observed kinetic results, a probable mechanism for the reaction has been proposed which corresponds to fast adsorption of the reductant and hydrogen ion on the surface of colloidal MnO₂.     

Water-soluble colloidal manganese dioxide as an oxidant for l-tyrosine in the absence and presence of non-ionic surfactant TX-100

Water-soluble colloidal manganese dioxide has been used to oxidize l-tyrosine in aqueous-acidic medium. The kinetics of the reaction was studied in the absence and presence of non-ionic surfactant (TX-100) using a spectrophotometric technique. As the reaction was fast under pseudo-first-order conditions ([l-tyrosine]  [MnO₂]), the rate constants as a function of [l-tyrosine], [MnO₂], [HClO₄] and temperature were obtained under second-order conditions. The rate of the reaction increased and decreased with the increase in [l-tyrosine] and [MnO₂], respectively. Perchloric acid, sodium pyrophosphate and sodium fluoride showed catalytic effect. The effect of externally added manganese(II) sulphate is complex. It is not possible to predict the exact dependence of the rate constants on manganese(II) concentration, which has a series of reactions with other reactants. The reaction is inhibited by the non-ionic surfactant TX-100. Activation parameters have been evaluated using Arrhenius and Eyring equations. Based on observed kinetic results, a probable mechanism for the reaction has been proposed which corresponds to fast adsorption of the reductant and hydrogen ion on the surface of colloidal MnO₂ followed by one-step two-electron transfer rate limiting process.     

Spectrophotometric study of interaction and solubilization of procaine hydrochloride in micellar systems

The interaction of Procaine hydrochloride (PC) with cationic, anionic and non-ionic surfactants; cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS) and triton X-100, were investigated. The effect of ionic and non-ionic micelles on solubilization of Procaine in aqueous micellar solution of SDS, CTAB and triton X-100 were studied at pH 6.8 and 29°C using absorption spectrophotometry. By using pseudo-phase model, the partition coefficient between the bulk water and micelles, K_x, was calculated. The results showed that the micelles of CTAB enhanced the solubility of Procaine higher than SDS micelles (K_x = 96 and 166 for SDS and CTAB micelles, respectively) but triton X-100 did not enhanced the solubility of drug because of weak interaction with Procaine. From the resulting binding constant for Procaine-ionic surfactants interactions (K_b = 175 and 128 for SDS and CTAB surfactants, respectively), it was concluded that both electrostatic and hydrophobic interactions affect the interaction of surfactants with cationic procaine. Electrostatic interactions have a great role in the binding and consequently distribution of Procaine in micelle/water phases. These interactions for anionic surfactant (SDS) are higher than for cationic surfactant (CTAB). Gibbs free energy of binding and distribution of procaine between the bulk water and studied surfactant micelles were calculated.      

Fluorescence quenching of naphthols by Cu2+ in micelles

Effect of the micelles of anionic, cationic and non-ionic surfactants on the fluorescence quenching of 1- and 2-naphthols has been studied in the presence of copper ion. The excited state lifetime, dynamic and static quenching constants for these systems have been determined. Fluorescence quenching in water and SDS micelle is due to the collision of the fluorophore with the quencher with a small static component. The negatively charged naphtholate ions in the excited state are quenched with significantly higher rates than the neutral naphthol molecules, which are located further inside the mesophase. CTAB micelle is less effective than the SDS micelle for fluorescence quenching. The effect of CTAB on water-assisted excited-state deprotonation has been investigated in the presence of ZnSO₄. For TX-100 micelle there is negligible quenching even at higher concentration of the quencher.     

Kinetics of the Degradation of l-Cysteine at Freshly Prepared Nano-sized MnO2 Surfaces in the Absence and Presence of TX-100

Nano-sized colloidal manganese dioxide was synthesized at room temperature by a chemical method in neutral medium without a stabilizing agent. The obtained MnO₂ nano-sized colloid was found to be stable for several months and was characterized by means of UV–Vis spectroscopy, energy-dispersive X-ray spectrometer (EDX) and transmission electron microscopy. The EDX analysis confirmed the presence of Mn and O in the sample. The paper reports on the use of nano-sized colloidal manganese dioxide as an oxidant in the oxidation of cysteine (Cyst) in the absence and presence of surfactant (TX-100) at 35 °C. The study was carried out as functions of [MnO₂], [Cyst], [HClO₄] and temperature. The results show that the reaction proceeds through fast adsorption of Cyst onto the surface of the colloidal MnO₂. Pseudo-first-order rate constants were found to increase with the increase in [TX-100]. This paper reports values of the reaction rates and activation parameters in the absence and presence of surfactant and proposes a plausible mechanism.     

Interaction of Nonionic Surfactant Triton-X-100 with Ionic Surfactants

The interaction in two mixtures of a nonionic surfactant Triton-X-100 (TX-100) and different ionic surfactants was investigated. The two mixtures were TX-100/sodium dodecyl sulfate (SDS) and TX-100/cetyltrimethylammonium bromide (CTAB) at molar fraction of TX-100, α_TX-100 = 0.6. The surface properties of the surfactants, critical micelle concentration (CMC), effectiveness of surface tension reduction (γ_CMC), maximum surface excess concentration (Γ_max), and minimum area per molecule at the air/solution interface (A _min) were determined for both individual surfactants and their mixtures. The significant deviations from ideal behavior (attractive interactions) of the nonionic/ionic surfactant mixtures were also determined. Mixtures of both TX-100/SDS and TX-100/CTAB exhibited synergism in surface tension reduction efficiency and mixed micelle formation, but neither exhibited synergism in surface tension reduction effectiveness.     

Effect of microheterogeneous environments of CTAB,Triton X-100, and Tween 20 on the oxidative degradation of d-fructose by nanoparticles of MnO2

The kinetics of the oxidative degradation of d -fructose by nanoparticles of MnO₂ has been studied in dilute sulfuric acid medium and also in the presence of surfactants of cetyl trimethyl ammonium bromide (CTAB), Triton X-100 (TX-100), and Tween 20. Amorphous nanoparticles of MnO₂ in the form of spherical particulates of size 50–200 nm, as detected by a transmission electron microscope, have been found to exist, supported on two-dimensional gum acacia sheets. The reaction is first order in MnO₂ but complex order with respect to fructose and H⁺. The reaction is inhibited due to adsorption of reaction products on the surface of MnO₂ nanoparticles. The reaction takes place through an intermediate complex formation between β-d -fructopyranose and protonated MnO₂. A one-step two-electron transfer reaction ultimately leads to the formation of an aldonic acid and formic acid. The entropy of activation plays the key role for the reaction in the absence of surfactants. In the surfactant-mediated reaction, partitioning of both the reactants takes place between the aqueous and micellar pseudophases and reaction occurs following Berezin's model. Binding of fructose with the surfactants in the Stern/palisade layer takes place through the ion–dipole interaction and H-bonding while protonated MnO₂ remains at the outer side of the Stern/palisade layer within the micelle. Both the enthalpy and entropy changes associated with the fructose–water interaction, fructose–micelle interaction, and micelle–water interaction finally control the fructose–micelle binding.     

Role of surfactants in clouding phenomenon of imipramine hydrochloride

The clouding behavior of tricyclic antidepressant drug imipramine hydrochloride (IMP) in aqueous solution has been studied in presence of surfactants. A pH increase in the presence as well as in the absence of surfactants decreased the CP. Drug molecules become neutral at high pH and therefore head–head repulsion decreases which lead to CP decrease. Addition of non-ionic and cationic surfactants increased the CP whereas anionic surfactants showed a peaked profile. Effect of CTAB/TX-100 at different fixed drug concentrations showed that at all surfactant concentrations the CP value was higher for higher drug concentrations. However, variation of pH produced opposite effect: CP at all CTAB/TX-100 concentrations decreased with increasing pH. All results are interpreted in terms of increase in hydrophobicity or hydrophilicity of micelles on addition of surfactants.     

SURFACTANT MEDIATED POLYMERIZATION KINETICS OF ACRYLAMIDE USING CR(VI)-CYCLOHEXANONE REDOX SYSTEM

The effect of organized surfactants on the kinetics of acrylamide (AM) polymerization have been studied over a temperature range of 25–45°C using Cr (VI)-cyclohexanone (CH) redox system as initiator. The rate of polymerization, R_p(obs), as well as, the percentage of the monomer conversio were found to be increased with increasing the concentration of the anionic surfactant (SDS), above its CMC. But the cationic surfactant (CTAB) reduced the rate considerably at higher concentration, while non-ionic surfactant (TX-100) played no role on the rate. The effect of [Cr(VI)], [CH], [AM], [H+], and ionic strength on the rates have also been examined. The presence of 0.015M SDS decreased the overall activation energy of the polymerization by 6.28 k.Cal/ mole as compared to that in the absence of a surfactant. On increasing the SDS concentration, the viscosity average molecular weight was also found to increase. For the polymerization process, a mutable mechanistic scheme has been pro-posed.     

Effect of ionic and non-ionic surfactants on the reduction of water soluble colloidal MnO<Subscript>2</Subscript> by glycolic acid

Kinetics of the redox reaction between colloidal MnO₂ and glycolic acid have been studied spectrophotometrically by monitoring the decay in the absorbance of colloidal MnO₂ in absence and presence of surfactants. Anionic sodium dodecyl sulfate has no effect, non-ionic Triton X-100 catalyzed the reaction and experiments were not possible in presence of cationic cetyltrimethylammonium bromide due to the precipitation of MnO₂.The reaction followed the same type of kinetic behavior, i.e., fractional-, first- and fractional-order dependencies, respectively, in [glycolic acid], [MnO₂] and [H⁺ ] in both the media. Effects of gum arabic and manganese(II) have also been studied and discussed. Mechanisms in accordance with the experimental data are proposed for the reaction.     

Steady-state fluorescence investigations of aqueous binary mixtures of myristyl alcohol based bis-sulfosuccinate anionic gemini surfactant and effect of different conventional surfactants therein

The present research work is associated with the fluorescence investigations of binary aqueous mixed surfactants solutions of anionic bis-sulfosuccinate gemini surfactant (BSGSMA_1,8) and three different conventional surfactants—anionic viz. sodium dodecyl sulfate (SDS), cationic viz. cetyl trimethyl ammonium bromide (CTAB), and nonionic surfactant viz. Triton X 100. Steady-state fluorescence spectroscopy technique has been utilized to examine the micellization behavior of aqueous solution of pure myristyl alcohol-based BSGSMA_1,8 having flexible methylene chain [(CH₂)₈] as spacer group. Critical micelle concentration (CMC), aggregation number (N), and micropolarity of pure and mixed surfactants systems were explored during the investigations. The results revealed the best synergism behavior of prepared gemini BSGSMA_1,8 with SDS as compared to CTAB and Triton X 100. The maximum reduction in the value of pyrene intensity ratio (I₁/I₃) was observed for gemini and SDS mixed surfactant solution. On the other hand, the increased I₁/I₃ value of mixed gemini with Triton X 100 exhibited that mixed surfactant system of anionic gemini BSGSMA_1,8 with non-ionic Triton X 100 is not as compact as other mixed surfactant systems. Aggregation number increased and micropolarity decreased with increased concentration of gemini surfactants.     

Surfactant-assisted electrodeposition and improved electrochemical capacitance of silver-doped manganese oxide pseudocapacitor electrodes

Ag-doped MnO₂ pseudocapacitor electrodes with dendrite and foam-like structures were successfully produced for the first time using an electrodeposition method employing structure-directing agents, i.e., sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB) acting through micelle formation at solid–liquid interfaces. Doping silver with MnO₂ enhanced their electronic conductance. Controlling pseudocapacitor electrode morphologies with surfactants accelerated ion transport. The specific capacitance values of the Ag-doped MnO₂ films produced with SDS and CTAB, measured in 0.5?M Na₂SO₄ at a scan rate of 5?mV?s^?1 were 551 and 557?F?g^?1, respectively. These values are about 2.7-fold higher than that of the pure MnO₂ film and about 1.4-fold higher than that of the Ag-doped MnO₂ film made without using surfactants.     

The effect of surfactants on adsorbed layers of a cationic polyelectrolyte

A comparative study of the influence of anionic (sodium dodecyl sulfate, SDS), cationic (tetradecyltrimethylammonium bromide, TTAB) and non-ionic (penta-ethyleneglycol mono n-dodecyl ether, C₁₂E₅) surfactants on the structure and composition of adsorbed layers of cationic hydrophobically modified hydroxyethylcellulose (Quatrisoft LM 200) on hydrophilic surfaces (mica and silica) was carried out using surface force apparatus andin situ null ellipsometry. It is shown that a complex interplay of electrostatic, hydrophobic, and steric effect govern polymer/surfactant/surface interactions and that the effect of surfactant addition strongly depends on its nature and concentration.Both anionic and non-ionic surfactants exhibit aggregation on the polymer hydrophobes. SDS has the most profound influence on Quatrisoft interfacial behavior due to the changes in electrostatics accompanying formation of the polymer/surfactant complex. In the case of C₁₂E₅, large surfactant clusters bound to the polymer affect the macromolecules' conformation in the adsorbed layer via steric effects. In contrast to SDS and C₁₂E₅, no evidence of interaction between the polycation and a like-charged surfactant, TTAB, was obtained. At the same time, TTAB adsorbs on the surface in competition with the polyelectrolyte. This results in partial displacement of the latter and its looser attachment to the surface.     

UV-Visible Spectrometric Study and Micellar Enhanced Ultrafiltration of Alizarin Red S Dye

Ultraviolet spectrometric study of alizarin red S (ARS) showed the substantial change in dye spectra by cationic CTAB as compared to anionic SDS and nonionic TX-100 surfactant. High spectral change by CTAB confirms the anionic nature of ARS dye and thus ARS-CTAB complex formation takes place due to electrostatic force of attraction. A little spectral change by SDS is the result of similarly charged repulsive forces that overcome weak hydrophobic-hydrophobic interaction between dye and surfactant micelles. TX-100 exhibited moderate spectral effect responsive to weak hydrophobic-hydrophobic interaction alone. MEUF study of ARS dye justified the spectral changes and dye rejection percentage (R) decreases in the following order: cationic > nonionic > anionic surfactant. Permeate flux (J) slightly decreases in presence of CTAB and it remains virtually constant for both SDS and TX-100. Addition of copper salt (i.e., CuCl₂) in dye-CTAB complex solution, favors rejection (%) removing dye and copper simultaneously via micellar enhanced ultrafiltration.     

Interaction of gums (guar, carboxymethylhydroxypropyl guar, diutan, and xanthan) with surfactants (DTAB, CTAB, and TX-100) in aqueous medium

The interaction of surfactants dodecyltrimethylammonium bromide (DTAB), cetyltrimethylammonium bromide (CTAB), and p-tert-octylphenoxypolyoxyethylene (9.5) ether (TX-100) with guar (Gr), carboxymethylhydroxypropyl guar (CMHPG), diutan (Dn), and xanthan (Xn) gums has been studied employing conductometry, tensiometry, microcalorimetry, viscometry, and atomic force microscopy (AFM) techniques. Both weak and strong interactions were observed. CTAB interacted stronger than DTAB with the gums. The surfactant-gum interaction process was enhanced by the presence of borate ions in the solution; the borate ion itself also manifested interaction with the surfactants comparable with that of water-soluble polymers polyvinyl alcohol, polyoxyethylene, and so forth. Viscometric results supported configurational changes of the gum molecules by interaction with surfactants. The geometry of the pure gums and their CTAB interacted products in the dried states was ascertained from AFM measurements; spherical and prolate shapes were observed for pure gums, and distorted states were observed for their surfactant complexed species. Detailed topological features of these entities were ascertained.     

Understanding surfactant aided aqueous dispersion of multi-walled carbon nanotubes

Dispersions of multi-walled carbon nanotubes (MWNTs) assisted by surfactant adsorption were prepared for a number of ionic and non-ionic surfactants including sodium 4-dodecylbenzenesulfonate (NaDDBS), hexadecyl(trimethyl)azanium bromide (CTAB), sodium dodecane-1-sulfonate (SDS), Pluronic? F68, Pluronic? F127, and Triton? X-100 to examine the effects of nanotube diameter, surfactant concentration, and pH on nanotube dispersability. Nanotube diameter was found to be an important role in surfactant adsorption rendering single-walled carbon nanotube studies as unreliable in predicting MWNT dispersive behavior. Similar to other reports, increasing surfactant concentrations resulted in a solubility plateau. Quantification of nanotube solubility at these plateaus demonstrated that CTAB is the best surfactant for MWNTs at neutral pH conditions. Deviations from neutral pH demonstrated negligible influence on non-ionic surfactant adsorption. In contrast, both cationic and anionic surfactants were found to be poor dispersing aids for highly acidic solutions while, CTAB remained a good surfactant under strongly basic conditions. These pH dependent results were explained in the context of nanotube surface ionization and Debye length variation.     

Micellar Catalysis on Pentavalent Vanadium Ion Oxidation of D-Sorbitol in Aqueous Acid Media: A Kinetic Study

Vanadium(V) oxidation of D-sorbitol shows a first-order dependency on the concentrations of D-sorbitol, vanadium(V), H⁺ and HSO₄⁻. These observations remain unaltered in the presence of externally added surfactants. The effects of the cationic surfactant (i.e., CPC), anionic surfactant (i.e., SDS) and neutral surfactant (i.e., TX-100) have been studied. CPC inhibits the reactions whereas SDS and TX-100 accelerate the reaction to different extents. SDS and TX-100 can be used as catalysts in the production of D-glucose from D-sorbitol.