3-D phase diagram of HPC/H2O/H3PO4 tertiary system

A 3-D phase diagram of the HPC/H₂O/H₃PO₄ tertiary system against various temperatures was established. Four distinct phases—the completely separated phase (S), the cloudy suspension phase (CS), the liquid crystalline miscible phase (LC), and the isotropically miscible phase (I)—were identified. The S phase shrank as the temperature increased, revealing that the HPC solubility increased with temperature, regardless of the LCST (lower critical solution temperature) characteristic. The addition of H₃PO₄ suppressed the formation of LC phase. However, as the temperature was raised sharply from 50 to 70?°C, the LC phase could only be maintained at high H₃PO₄ concentration region; it was a triangular shape, and the top apex of the triangle was the temperature-invariant L* point (HPC/H₂O/H₃PO₄ 38/9/53?wt%). The CS phase expanded considerably into the H₂O-rich but H₃PO₄-poor region when the temperature continued to increase over 48?°C. The LCST points of the CS phase that contained 0 and 15?wt% of H₃PO₄ were 34 and 38?°C, respectively. These CS results demonstrate that H₃PO₄ suppresses the occurrence of LCST behavior. Additionally, the binodal curve exhibits a weak or even zero dependence of binodal temperature on the HPC concentration at HPC concentrations of less than 30?wt% in a pure water system. A hypothesis concerning the sequential desorption of water molecules was proposed to explain such behavior.     

Liquid crystalline phase in xanthan gum (XG)/H2O/H3PO3 and XG/H2O/H3PO4 tertiary systems: a thermal and rheological study

This study investigates the difference in phase transition and rheological behavior between xanthan gum (XG)/H₂O/H₃PO₃ (XWP₃) and XG/H₂O/H₃PO₄ (XWP₄) tertiary systems using polarized optical microscopy, Fourier transform infrared spectroscopy, light transmission detection, and rheometry. The results show that the LC (liquid crystal) phase formation in the XWP₄ system was more strongly suppressed than that in the XWP₃ system because the former exhibited stronger interactions between acid and XG molecules. With respect to the transition from LC to I (isotropic) phase at high temperature, the transition time of the XWP₄ system was found to be much shorter than that of the XWP₃ system. The transition time, also called the relaxation time, was measured by observing the annealing time and fitted using the VFT expression. The activation energies E for this transition in XWP₄ and XWP₃ systems are 3.0 and 4.7 kJ/mole, respectively, indicating that the XWP₃ system exhibits stronger intermolecular attraction and is more sensitive to variation in temperature. In the rheological tests, as the temperature of the XWP₄ system increased from 25 to 95 °C, the viscosity in the transitional region declined consistently, while in the XWP₃ system, the decline proceeded through three stages owing to the shifting tautomers of the H₃PO₃. In the LC region, the viscosity normally fell as the shear rate or temperature increased but increased with the heating rate or XG concentration. Most interestingly, all of the results herein demonstrated that the viscosity of the XG solution in the LC region followed a power law with an index of roughly 0.08, which was found to be independent of the type of acid, concentration of acid, and XG concentration.     

HPC/H2O/H3PO4 tertiary system: a rheological study

This study characterizes the rheological behavior of the HPC/H₂O/H₃PO₄ tertiary system based on the 3-D phase diagram that was obtained in our earlier work. The effects of frequency, temperature, HPC concentration, liquid composition (H₂O/H₃PO₄ ratio), and phase status on the rheological parameters were thoroughly investigated. The most useful parameter for distinguishing the isotropic (I) and liquid crystalline (LC) phases was tanδ. Agglomeration in the cloudy suspension (CS) phase at high temperature was too severe to allow a smooth flow, so the tanδ and η* represented significant damping, which is a good indicator of the presence of the CS phase. With an increase in temperature, the viscosity of the flow with a single homogeneous phase—either the I phase or the LC phase—or a combination of two homogeneous phases in sequence, obeyed the Arrhenius model. In contrast, once the temperature rose to that of the formation of heterogeneous CS phase, the Arrhenius model was no longer valid. The activation energy E of the I phase was greater, and more sensitive to the HPC concentration, than the LC phase. Finally, the concentration of the sol/gel transition (SGT) declined as temperature increased but increased as the H₃PO₄ content increased. Furthermore, this tertiary system exhibited no clear order of the onsets of the formations of SGT phase, the LC phase, and the CS phase as HPC concentration was varied.     

Phase Behavior of Commercial AES/Ethanol/H2O Ternary System

Phase behavior containing alkyl ethoxysulfates (AES), ethanol, and H₂O over the whole concentration range was explored at 25°C. The system exhibited an isotropic solution phase (L), two different liquid crystalline phases: hexagonal phase (H), lamellar phase (Lα), and a biphasic region appearing with the ethanol concentration increasing. Polarized optical microscopy and small angle x-ray scattering were applied to characterize liquid crystalline phases. Direct two-phase titration and liquid chromatography–mass spectrometry (LC–MS) were employed to analyze the AES activity and homologues composition of the particles appearing in two-phase region.     

Enhanced Xylose Recovery from Oil Palm Empty Fruit Bunch by Efficient Acid Hydrolysis

Oil palm empty fruit bunch (EFB) is abundantly available in Malaysia and it is a potential source of xylose for the production of high-value added products. This study aimed to optimize the hydrolysis of EFB using dilute sulfuric acid (H₂SO₄) and phosphoric acid (H₃PO₄) via response surface methodology for maximum xylose recovery. Hydrolysis was carried out in an autoclave. An optimum xylose yield of 91.2 % was obtained at 116 °C using 2.0 % (v/v) H₂SO₄, a solid/liquid ratio of 1:5 and a hydrolysis time of 20 min. A lower optimum xylose yield of 24.0 % was observed for dilute H₃PO₄ hydrolysis at 116 °C using 2.4 % (v/v) H₃PO₄, a solid/liquid ratio of 1:5 and a hydrolysis time of 20 min. The optimized hydrolysis conditions suggested that EFB hydrolysis by H₂SO₄ resulted in a higher xylose yield at a lower acid concentration as compared to H₃PO₄.     

Influence of meta-extended rigid-core,complementary hydrogen bonding and flexible chain on polymorphism in Schiff-base liquid crystals: (4)MeOBD(3)AmBA:nOBAs

ABSTRACT

Schiff-base complementary hydrogen-bonded liquid crystals (HBLC), viz., (4)_MeOBD(3)_AmBA:nOBAs with flexible chain length for n = 3,4,5,6,7,8,9,10,11 and 12 are reported. ¹H; ¹³C-NMR and Infra-Red spectroscopy used to confirm the formation of HBLCs. LC phases and transition temperatures (T_c) determined by polarised optical microscopy (POM) and differential scanning calorimetry (DSC). T_c and enthalpy (?H) determined by DSC also. Odd-Even effect observed at clearing and melting transitions. Influence of Schiff base and Oxygen as bridging atom promote smectic phase abundance. HBLCs exhibit tetra- or penta-phase variance. Maximum (penta) phase variance is exhibited by n = 8 and 12 with long flexible chain. Prevalent abundance of quasi-two-dimensional (2D) LC phases of SmF and SmI is observed. Nematic phase is quenched. Lower (n = 4) and intermediate (n = 6) members exhibited SmB_cryst phase. Predominant occurrence of enantiotropic LC phases is noticed. All members exhibited 3D tilted SmG phase. A-C transition exhibited by intermediate homologues (for n = 7, 8, 9 and 10) is found to be either second order or with very small enthalpy. Phase diagram reveals the abundance of multi-critical points with LC phasesinvolving exotic symmetries. Influence of meta-extended rigid core, complementary HB and flexibility is studied for the LC phase abundance with characteristic structural order. POM and DSC results are discussed in the wake of reports in other achiral calamitic LCs.     

Etude de la deshydratation de Ca(H2PO4)2·H2O et de sa reaction avec CaSO4 par ATD-ATG couplees

The dehydration of Ca(H₂PO₄)₂·H₂O was examined with simultaneous DTA and TG. This dehydration permitted clearly the apparation of the following phases: Ca(H₂PO₄)₂·0.5H₂O, Ca(H₂PO₄)₂, Ca₃(HP₂O₇)₂, Ca₂HP₃O₁₀ et Ca(PO₃)₂. The reaction of Ca(H₂PO₄)₂·H₂O and CaSO₄ was also examined with the same technics. It was found that the decomposition of CaSO₄ takes place for relatively low temperature (between 600°C and 800°C).     

Synthese und Kristallstruktur von K2(HSO4)(H2PO4), K4(HSO4)3(H2PO4) und Na(HSO4)(H3PO4)

Synthesis and Crystal Structure of K₂(HSO₄)(H₂PO₄), K₄(HSO₄)₃(H₂PO₄), and Na(HSO₄)(H₃PO₄) Mixed hydrogen sulfate phosphates K₂(HSO₄)(H₂PO₄), K₄(HSO₄)₃(H₂PO₄) and Na(HSO₄)(H₃PO₄) were synthesized and characterized by X‐ray single crystal analysis. In case of K₂(HSO₄)(H₂PO₄) neutron powder diffraction was used additionally. For this compound an unknown supercell was found. According to X‐ray crystal structure analysis, the compounds have the following crystal data: K₂(HSO₄)(H₂PO₄) (T = 298 K), monoclinic, space group P 2₁/c, a = 11.150(4) Å, b = 7.371(2) Å, c = 9.436(3) Å, β = 92.29(3)°, V = 774.9(4) ų, Z = 4, R₁ = 0.039; K₄(HSO₄)₃(H₂PO₄) (T = 298 K), triclinic, space group P 1, a = 7.217(8) Å, b = 7.521(9) Å, c = 7.574(8) Å, α = 71.52(1)°, β = 88.28(1)°, γ = 86.20(1)°, V = 389.1(8)ų, Z = 1, R₁ = 0.031; Na(HSO₄)(H₃PO₄) (T = 298 K), monoclinic, space group P 2₁, a = 5.449(1) Å, b = 6.832(1) Å, c = 8.718(2) Å, β = 95.88(3)°, V = 322.8(1) ų, Z = 2, R₁ = 0,032. The metal atoms are coordinated by 8 or 9 oxygen atoms. The structure of K₂(HSO₄)(H₂PO₄) is characterized by hydrogen bonded chains of mixed H_nS/PO₄^– tetrahedra. In the structure of K₄(HSO₄)₃(H₂PO₄), there are dimers of H_nS/PO₄^– tetrahedra, which are further connected to chains. Additional HSO₄^– tetrahedra are linked to these chains. In the structure of Na(HSO₄)(H₃PO₄) the HSO₄^– tetrahedra and H₃PO₄ molecules form layers by hydrogen bonds.     

Kristallographische Orientierungsbeziehungen zwischen den Phasen der Reaktionsfolge Ca2[P4O12] · 4 H2O → β-(Ca2[PO3]4)x

Crystallographic Orientation Relations between the Phases in the Reaction Ca₂[P₄O₁₂] · 4 H₂O → β-(Ca₂[PO₃]₄)_x The dehydration of Ca₂[P₄O₁₂] · 4 H₂O modification I proceeds over several intermediate phases to β-(Ca₂[PO₃]₄)_x crystallographically oriented. One of the intermediate phases is X-ray amorphous. It is of special interest, that this amorphous phase does not interrupt the oriented course of the reaction. The β-polyphosphate transforms to β-Ca₂[P₂O₇] connected with the loss of P₂O₅ at further heating. The crystallographic orientation relations between educt and product were determined for all steps of the reaction. The unit cells of the phases were determined too.     

Simulating the proton transfer reaction in the phosphoric acid-N,N-dimethylformamide system by means of the AM1 semiempirical method

Using the AM1 semiempirical method, we calculate the energy profile of the proton transfer reaction during the formation of a hydrogen bond between molecules of phosphoric acid (H₃PO₄) and N,N-dimethylformamide (DMFA) in both gas and liquid phases. The energy barriers of the reaction transition are estimated. The changes in the geometric parameters of hydrogen bonds and the intermolecular interaction energy of H₃PO₄-DMFA and (H₃PO₄)₂-DMFA complexes during the transition from the gas phase into the solution are analyzed.     

Optimizing Phosphoric Acid plus Hydrogen Peroxide (PHP) Pretreatment on Wheat Straw by Response Surface Method for Enzymatic Saccharification

Wheat straw was pretreated by phosphoric acid plus hydrogen peroxide (PHP), in which temperature, time, and H₃PO₄ proportion for pretreatment were investigated by using response surface method. Results indicated that hemicellulose and lignin removal positively responded to the increase of pretreatment temperature, H₃PO₄ proportion, and time. H₃PO₄ proportion was the most important variable to control cellulose recovery, followed by pretreatment temperature and time. Moreover, these three variables all negatively related to cellulose recovery. Increasing H₃PO₄ proportion can improve enzymatic hydrolysis; however, reduction on cellulose recovery results in decrease of glucose yield. Extra high temperature or long time for pretreatment was not beneficial to enzymatic hydrolysis and glucose yield. Based on the criterion for minimizing H₃PO₄ usage and maximizing glucose yield, the optimized pretreatment conditions was 40 °C, 2.0 h, and H₃PO₄ proportion of 70.2 % (H₂O₂ proportion of 5.2 %), by which glucose yielded 299 mg/g wheat straw (946.2 mg/g cellulose) after 72-h enzymatic hydrolysis.     

Clathrate formation in the liquid phase of (C4H9)4NF−NH4F−H2O

At a certain concentration of NH₄F, the solid allocyric solutions of the (C₄H₉)₄NF−NH₄F−H₂O system stratify into two liquid phases in the process of melting. The mutual solubility of the liquids decreases at elevated temperatures. The boundary surface of the stratification region was determined The solubility isotherms (27 and 30°C) of the stratification region are investigated by the solubility method This relatively rare mutual sulubility of liquids (retrograde solubility) is associated with clathrate formation in the liquid phase. Near the melting points of the solid clathrate solutions, both in the liquid and solid phases the tetrabutylammonium cation evidently forms surrounding cavities bounded by water and ammonium fluoride molecules linked by hydrogen bonds. The clathrate-like components of the solution are structurally compatible with “water-like” and “organic” components, i.e., they are homogenizing components. At higher temperatures, the homogenizing clathrate-like structures break down, and the structurally incompatible solution components stratify into two phases. Institute of Inorganic Chemistry, Siberian Branch, Russian Academy of Sciences. Translated fromZhurnal Strukturnoi Khimii, Vol 35, No. 6, pp. 122–128, November–December, 1994. Translated by L. Smolina     

Synthesis and mesomorphic behaviours of a homologous series of 2-(4-alkyloxybenzylidenamino)benzothiazoles

The synthesis and characterisation of a series of new rod-shaped liquid crystal (LC), 2-(4-alkyloxybenzylidenamino)benzothiazoles possessing even number of carbon atoms at the alkyloxy chain (C_nH_2n?+?1O-, n = 2, 4, 6, 8, 10, 12, 14, 16, 18) are reported. The molecular structures of title compounds were elucidated using FTIR and nuclear magnetic resonance spectroscopic techniques. The phase behaviour of these new compounds was characterised and studied by differential scanning calorimetry and polarising optical microscopy. Lower members (n = 2, 4 and 6) did not exhibit mesophase. Octyloxy derivative was monotropic LC. Enantiotropic smectic A phase was observed from n-decyloxy derivatives onward to the last homologous synthesised.     

Chiral palisade side-chain liquid crystal copolymers: effect of comonomer end group on the nature of the liquid crystalline

Three series of copolymers were prepared from 4-[2-(S)-methyl-3-acryloxy)-4′-methoxy phenyl] benzoate, as the common chiral monomer, and three nonchiral 4-alkyloxy phenyl-4′-(6-acryloxy hexyloxy) benzoates with alkyloxy tail groups containing seven to nine atoms. All of the copolymers exhibited liquid crystalline (LC) behavior over the entire composition ranges studied. It was demonstrated that by changing the length of the alkyloxy unit, significant differences could be induced in the LC phases observed. When the alkyloxy unit was seven atoms long only chiral nematic (N*) phases were detected, whereas lengthening the alkyloxy unit to eight and nine atoms led to the formation of smectic A (S_A) and chiral smectic C (S*_C ) phases in addition to the N* phase. Films of these materials exhibited selective reflection in the visible region as one would expect from the presence of N* and S*_C phases. © 1998 John Wiley & Sons, Ltd.     

Clathrate Formation in the Water–Tetraisoamylammonium Propionate System: X-ray Structural Analysis of the Clathrate Hydrate (i-C5H11)4NC2H5CO2·36H2O

In this work X-ray single crystal structural analysis was carried out on the clathrate hydrate of tetraisoamylammonium propionate with the composition (i-C₅H₁₁)₄NC₂H₅CO₂·36H₂O. The hydrate was found to have an orthorhombic structure in space group Cmc2 ₁ with unit cell parameters: a = 21.281(2) Å, b= 12.010(7) Å, c = 24.768(3) Å (150 K). X-ray powder diffraction studies were performed of the hydrate phase, crystallized in the water–(i-C₅H₁₁)₄NC₂H₅CO₂ system in the concentration range of the salt (10–25 wt%) that is the crystallization region of the studied polyhydrate, according to the phase equilibria data. It was found, that in the given concentration region the same hydrate of orthorhombic structure is formed, unit cell parameters, obtained at 20 °C: a = 21.454(13) Å, b = 12.156(4) Å, c = 25.030(14) Å, are in a good agreement with the data of single crystal structural analysis.     

Influence of terminal substituent on non-linear S-shaped oligomers consisting of azobenzene moieties at the peripheral arm: Synthesis,characterisation and phase transition behaviour

A series of symmetrical S-shaped mesogens based on 4,4′-bis-(6-bromohexyloxy)biphenyl as a central unit containing two 2-{6-[4-(4-substitutedphenylazo)phenoxy]hexyloxy}phenol as side-chain groups has been successfully synthesised. The terminal substituent was varied from halogen (X = F, Cl, Br and I) to non-halogen (X = C₂H₅ and OC₂H₅). The oligomers with C₂H₅ and OC₂H₅ substituents exhibit predominantly the monotropic nematic (N) phase. The OC₂H₅-containing derivatives possess long-range stability of N phase than its C₂H₅-containing analogue in which it has small range of N phase stability. As for halogen-containing analogues, oligomer with F exhibits monotropic N phase whilst oligomers with Cl and Br exhibit monotropic N and smectic A (SmA) phases. In addition, homologue with Br shows additional phase which is smectic B (SmB) phase upon further cooling. However, the oligomers in which F, Cl and Br were substituted by I exhibits purely monotropic SmA and SmB phases. X-ray diffraction measurements reveal that the smectic phase is inclined to the monolayer structure.     

Structures of urea/thiourea 1,3-disubstituted thia[4]calixarenes and corresponding monofunctional receptors and their anion recognition properties

Two thiacalix[4]arenes in 1,3-alternate conformation functionalized by two (CH₂)₂NH(C=X)NHC₆H₄-NO₂-p groups (X = S,O) as well as two related monofunctional receptors MeO(CH₂)₂NH(C=X)NHC₆H₄-NO₂-p were prepared and characterized by X-ray crystal structures. The thioureido and ureido derivatives have E,Z and E,E conformations respectively both in monofunctional receptors and thiacalixarenes. The thiacalixarene attached thiourea groups are well separated from each other, but respective urea groups are much closer to each other and have mutual parallel orientation making the bisurea derivative a better preorganized receptor as compared to bisthiourea. Binding of Cl^?, F^?, H₂PO₄ ^? and AcO^? anions in chloroform and DMSO was studied by spectrophotometric and NMR titrations. In chloroform both bisurea and bisthiourea thiacalix[4]arenes bind anions 3–5 times stronger than corresponding monofunctional compounds in spite of better preorganization of the urea derivative. In DMSO simultaneous deprotonation of ureido NH groups of receptors and hydrogen bonding reactions are observed. Deprotonation by H₂PO₄ ^? is accompanied by a strong association between liberated H₃PO₄ and H₂PO₄ ^? (log K = 3.9). For hydrogen bonding associations the binding constants of H₂PO₄ ^? and AcO^? with bisurea thiacalixarene are up to two orders of magnitude larger than those with corresponding monofunctional receptor, but with bisthiourea thiacalixarene the effect is less than two-fold. Thus in this solvent in contrast to chloroform the preorganization is an important factor.     

HPLC Method for Monitoring of Degradation Products in Picoplatin Stability Study

An analytical method combining high-performance liquid chromatography (HPLC) with UV detection was developed for an easy and rapid assay determination of the anticancer drug picoplatin (=cis-[Pt(NH₃)(2-methylpyridine)Cl₂]) and its degradation products. An ion exchanger was used as the stationary phase with an aqueous solution of NaH₂PO₄ with pH adjusted to 3.0 with H₃PO₄ as the mobile phase. The calibration curve was linear within the concentration range of 0.10–0.50 g L^?1 (R ² ≥ 0.998). The limit of detection was 0.05 g L^?1 and limit of quantification was 0.09 g L^?1. The developed method was characterized with a high precision (≤6.0%, determined as RSD), an acceptable accuracy (the values of recovery were from intervals 98–103%). The developed method was used for assessing the stability of picoplatin during a stability study.     

Kinetics and mechanism of the reduction of diaquotetrakis (2,2′-bipyridine)-µ-oxodiruthenium(III) ion by hypophosphorous acid in acidic medium

The kinetics and mechanism of the reduction of diaquotetrakis(2,2′-bipyridine)-µ-oxodiruthenium(III), [(H₂O)₂(bipy)₄Ru₂O]⁴⁺, by H₃PO₂ has been studied in aqueous acid at ionic strength = 0.5 mol dm^?3 (NaClO₄), [H⁺] = 5.0 × 10^?2 mol dm^?3 and temperature = 31 ± 1 °C. Measurement of the stoichiometry showed that 1 mole of [(H₂O)₂(bipy)₄Ru₂O]⁴⁺ was reduced by 1 mole of H₃PO₂. The reaction was found to be first order with respect to both [(H₂O)₂(bipy)₄Ru₂O⁴⁺] and [H₃PO₂], hence second order overall. Variations in the ionic strength and dielectric constant of the reaction medium had no effect on the rate. Also, addition of various ions to the reaction medium did not significantly alter the rate. Free radicals were identified during the course of the reaction by a polymerisation test. Spectroscopic information and Michaelis–Menten plots suggested the absence of an intermediate complex prior to electron transfer. [(H₂O)₂(bipy)₂Ru]²⁺, the reduction product of [(H₂O)₂(bipy)₄Ru₂O]⁴⁺, plus H₃PO₃, the oxidation product of H₃PO₂, were identified in the product solutions. It is suggested that the reaction proceeds through the outer sphere pathway. A mechanism for the reaction is proposed.     

Preparation and exfoliation of layered titanium butyl phosphates

Titanium butyl phosphates (TiBP) synthesized by reacting Ti(SO₄)₂ with a mixture of mono-(C₄H₉PO₄H₂) and dibutyl phosphates ((C₄H₉)₂PO₄H) in aqueous ethanol solution at 25 °C were characterized by various conventional techniques. XRD pattern of TiBP possessed a peak at 2θ?=?5.5° and a broad hump at 2θ?=?15–30°. This fact indicated that the material was composed of a multilayer alternating bilayer of butyl groups of the phosphates and amorphous titanium phosphate phase. The TiBP was spherical particles with a size of ca. 100 nm and the chemical formula of this material was Ti((C₄H₉O)₂PO₂)_x(C₄H₉OPO₃)_y(OH)_z. The TiBP possessed a UV absorption property due to charge transfer of O^2? ? Ti⁴⁺. The layered structure of TiBP was exfoliated in ethanol at 25 °C up to TiBP concentration of 1.0?×?10⁵ ppm to form nanosheet. The nanosheet dispersing solution exhibited a UV absorption property and the property depends on nanosheet concentration.