White‐Light‐Emitting Edge‐Functionalized Graphene Quantum Dots

Graphene quantum dots (GQDs) have received considerable attention for their potential applications in the development of novel optoelectronic materials. In the generation of optoelectronic devices, the development of GQDs that are regulated in terms of their size and dimensions and are unoxidized at the sp² surfaces is desired. GQDs functionalized with bulky Fréchet’s dendritic wedges at the GQD periphery were synthesized. The single‐layered, size‐regulated structures of the dendronized GQDs were revealed by atomic force microscopy. The edge‐functionalization of the GQDs led to white‐light emission, which is an uncommon feature.     

Macroscopic Graphene Fibers Directly Assembled from CVD‐Grown Fiber‐Shaped Hollow Graphene Tubes

Using a copper wire as the substrate for the CVD growth of a hollow multilayer graphene tube, we prepared a macroscopic porous graphene fiber by removing the copper in an aqueous mixture solution of iron chloride (FeCl₃, 1 M ) and hydrochloric acid (HCl, 3 M ) and continuously drawing the newly released graphene tube out of the liquid. The length of the macroscopic graphene fiber thus produced is determined mainly by the length of the copper wire used. The resultant macroscopic graphene fiber with the integrated graphene structure exhibited a high electrical conductivity (127.3 S cm^?1) and good flexibility over thousands bending cycles, showing great promise as flexible electrodes for wearable optoelectronics and energy devices—exemplified by its use as a flexible conductive wire for lighting a LED and a cathode in a fiber‐shaped dye‐sensitized solar cell (DSSC) with one of the highest energy conversion efficiencies (3.25 %) among fiber‐shaped DSSCs.     

Magnetic Graphene Oxide Anchored Sulfonic Acid as a Novel Nanocatalyst for the Synthesis of N‐aryl‐2‐amino‐1,6‐naphthyridines

Magnetic graphene oxide functionalized with sulfonic acid (Fe₃O₄‐GO‐SO₃H) was used as a new recyclable nanocatalyst for one‐pot synthesis of N‐aryl‐2‐amino‐1,6‐naphthyridine derivatives under solvent free conditions. The catalyst could be easily recovered from the reaction mixture by an external magnet and reused without significant decrease in activity even after 4 runs. This nanocatalyst exhibited better activities to other commercially available sulfonic acid catalysts.     

Graphene Enhances the Shape Memory of Poly (acrylamide‐co‐acrylic acid) Grafted on Graphene

Acrylamide and acrylic acid are grafted on graphene by free‐radical polymerization to produce a series of graphene–poly(acrylamide‐co‐acrylic acid) hybrid materials with different contents of graphene. The materials demonstrate shape memory effect and self‐healing ability when the content of graphene is in the range of 10%–30% even though poly(acrylamide‐co‐acrylic acid) itself had poor shape memory ability. The permanent shape of the materials can be recovered well after 20 cycles of cut and self‐healing. The result is attributed to the hard–soft design that can combine nonreversible “cross‐link” by grafting copolymer on graphene and reversible “cross‐link” utilizing the “zipper effect” of poly(acrylamide‐co‐acrylic acid) to form or dissociate the hydrogen‐bond network stimulated by external heating.

     

Electrochemiluminescence Biosensor Based on PEDOT‐PSS‐ Graphene Functionalized ITO Electrode

A novel and sensitive electrochemiluminescence (ECL) method for ethanol biosensor was developed by co‐immobilizing the enzyme and ECL reagent Ru(bpy)₃²⁺ on the poly‐(3,4‐ethylene dioxythiophene) and polystyrene sulfonate functionalized graphene (PEDOT‐PSS‐G) nanocomposite film. Positively charged Ru(bpy)₃²⁺ could be immobilized effectively on the electrode surface with the negatively charged PSS and graphene, which provided a stable ECL platform for further modification with the enzyme. Moreover, the introduction of PEDOT and graphene can be acted as a conducting pathway to accelerate the electron transfer due to the high conductivity. Such biosensor combined enzymatic selectivity with the amplification of PEDOT‐PSS‐G performed well with a wide linear range, high sensitivity and good stability. The sensing platform was successfully applied to determine the amounts of alcohol in real samples.     

Layer‐by‐layer Assembled Multilayers of Graphene/Mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin for Detection of Dopamine

Graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin multilayer films composed of graphene sheet (GS) and mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were fabricated easily by two steps. First, negatively charged graphene oxide (GO) and positively charged mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were layer‐by‐layer (LBL) self‐assembled on glassy carbon electrode (GCE) modified with a layer of poly(diallyldimethylammonium chloride) (PDDA). Then graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GS/NH₂‐β‐CD) multilayer films were built up by electrochemical reduction of graphene oxide/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GO/NH₂‐β‐CD). Combining the high surface area of GS and the active recognition sites on β‐cyclodextrin (β‐CD), the GS/NH₂‐β‐CD multilayer films show excellent electrochemical sensing performance for the detection of DA with an extraordinary broad linear range from 2.53 to 980.05 µmol·L^?1. This study offers a simple route to the controllable formation of graphene‐based electrochemical sensor for the detection of DA.     

Iridium‐Catalyst‐Based Autonomous Bubble‐Propelled Graphene Micromotors with Ultralow Catalyst Loading

A novel concept of an iridium‐based bubble‐propelled Janus‐particle‐type graphene micromotor with very high surface area and with very low catalyst loading is described. The low loading of Ir catalyst (0.54 at %) allows for fast motion of graphene microparticles with high surface area of 316.2 m² g^?1. The micromotor was prepared with a simple and scalable method by thermal exfoliation of iridium‐doped graphite oxide precursor composite in hydrogen atmosphere. Oxygen bubbles generated from the decomposition of hydrogen peroxide at the iridium catalytic sites provide robust propulsion thrust for the graphene micromotor. The high surface area and low iridium catalyst loading of the bubble‐propelled graphene motors offer great possibilities for dramatically enhanced cargo delivery.     

Solvated Graphene Frameworks as High‐Performance Anodes for Lithium‐Ion Batteries

A solvent‐exchange approach for the preparation of solvated graphene frameworks as high‐performance anode materials for lithium‐ion batteries is reported. The mechanically strong graphene frameworks exhibit unique hierarchical solvated porous networks and can be directly used as electrodes with a significantly improved electrochemical performance compared to unsolvated graphene frameworks, including very high reversible capacities, excellent rate capabilities, and superior cycling stabilities.     

“Click”‐Triggered Self‐Healing Graphene Nanocomposites

Strategies to compensate material fatigue are among the most challenging issues, being most prominently addressed by the use of nano‐ and microscaled fillers, or via new chemical concepts such as self‐healing materials. A capsule‐based self‐healing material is reported, where the adverse effect of reduced tensile strength due to the embedded capsules is counterbalanced by a graphene‐based filler, the latter additionally acting as a catalyst for the self‐healing reaction. The concept is based on “click”‐based chemistry, a universal methodology to efficiently link components at ambient reaction conditions, thus generating a “reactive glue” at the cracked site. A capsule‐based healing system via a graphene‐based Cu₂O (TRGO‐Cu₂O‐filler) is used, acting as both the catalytic species for crosslinking and the required reinforcement agent within the material, in turn compensating the reduction in tensile strength exerted by the embedded capsules. Room‐temperature self‐healing within 48 h is achieved, with the investigated specimen containing TRGO‐Cu₂O demonstrating significantly faster self‐healing compared to homogeneous (Cu(PPh₃)₃F, Cu(PPh₃)₃Br), and heterogeneous (Cu/C) copper(I) catalysts.

     

Self‐Healing in Tough Graphene Oxide Composite Hydrogels

Polymer hydrogels that are capable of spontaneously healing injury are being developed at a rapid pace because of their great potential in biomedical applications. Here, the self‐healing property of tough graphene nanocomposite hydrogels fabricated by using graphene peroxide as polyfunctional initiating and cross‐linking centers is reported. The hydrogels show excellent self‐healing ability at ambient temperature or even lower temperatures for a short time and very high recovery degrees (up to 88% tensile strength) can be achieved at a prolonged healing time. The healed gels exhibit very high tensile strengths (up to 0.35 MPa) and extremely high elongations (up to 4900%). The strong interactions between the polyacrylamide chains and the graphene oxide sheets are essential to the mechanical strengths of the healed gels.

     

Monodisperse Sandwich‐Like Coupled Quasi‐Graphene Sheets Encapsulating Ni2P Nanoparticles for Enhanced Lithium‐Ion Batteries

In this report, sandwiched Ni₂P nanoparticles encapsulated by graphene sheets are first synthesized by directly encapsulating functional units in graphene sheets instead of fabricating separate graphene sheets and then immobilizing the functional components onto the generated surfaces. In this strategy, we use low‐cost, sustainable and environmentally friendly glucose as a carbon source and NiNH₄PO₄ ? H₂O nanosheets as sacrificial templates. This unique structure obtained here cannot only prevent the nanoparticles from aggregation or loss but also enhance the electronic conductivity compared to the independent nanoparticles. Furthermore, the novel sandwich‐like Ni₂P/C can be applied in plenty of fields, especially in electrical energy storage. In this paper, a series of electrochemical tests of the sandwich‐like Ni₂P/C are carried out, which demonstrate the excellent cyclic stability and rate capacity for lithium‐ion batteries.     

Reversible Self‐Assembly of Terpyridine‐Functionalized Graphene Oxide for Energy Conversion

Terpyridine‐functionalized graphene oxides were prepared for self‐assembly into 3D architectures with various metal ions (e.g., Fe, Ru). The resulting electrode materials showed significantly improved electroactivities for efficient energy conversion and storage. They showed promise for application in the oxygen reduction reaction (ORR), photocurrent generation, and supercapacitance.     

Preparation of a Reduced Graphene Oxide Wrapped Lithium‐Rich Cathode Material by Self‐Assembly

A lithium‐rich cathode material wrapped in sheets of reduced graphene oxide (RGO) and functionalized with polydiallyldimethylammonium chloride (PDDA) was prepared by self‐assembly induced from the electrostatic interaction between PDDA–RGO and the Li‐rich cathode material. At current densities of 1000 and 2000 mA g^?1, the PDDA–RGO sheet wrapped samples demonstrated increased discharge capacities, increasing from 125 to 155 mA h g^?1 and from 82 to 124 mA h g^?1, respectively. The decreased resistance implied by this result was confirmed from electrochemical impedance spectroscopy results, wherein the charge‐transfer resistance of the pristine sample decreased after wrapping with the PDDA–RGO sheets. The PDDA–RGO sheets served as a protective layer sand as a conductive material, which resulted in an improvement in the retention capacity from 56 to 81 % after 90 cycles.