POM-Incorporated CoO Nanowires for Enhanced Photocatalytic Syngas Production from CO2

Utilizing sustainable energy for chemical activation of small molecules, such as CO₂, to produce important chemical feedstocks is highly desirable. The simultaneous production of CO/H₂ mixture (syngas) from photoreduction of CO₂ and H₂O is highly promising. However, the relationships between structure, composition, crystallinity, and photocatalytic performance are still indistinct. Here, amorphous ultrathin CoO nanowires and polyoxometalate incorporated nanowires with even lower crystallinity were synthesized. The POM-incorporated ultrathin nanowires exhibit high photocatalytic syngas production activity, reaching H₂ and CO evolution rates of 11555 and 4165 μmol g⁻¹ h⁻¹ respectively. Further experiments indicate that the ultrathin morphology and incorporation of POM both contribute to the superior performance. Multiple characterizations reveal the enhanced charge–hole separation efficiency of the catalyst would facilitate the photocatalysis.     

MOF Encapsulated AuPt Bimetallic Nanoparticles for Improved Plasmonic-induced Photothermal Catalysis of CO2 Hydrogenation

Exploring new catalytic strategies for achieving efficient CO₂ hydrogenation under mild conditions is of great significance for environmental remediation. Herein, a composite photocatalyst Zr-based MOF encapsulated plasmonic AuPt alloy nanoparticles (AuPt@UiO-66-NH₂) was successfully constructed for the efficient photothermal catalysis of CO₂ hydrogenation. Under light irradiation at 150 °C, AuPt@UiO-66-NH₂ achieved a CO production rate of 1451 μmol g_metal⁻¹ h⁻¹ with 91 % selectivity, which far exceeded those obtained by Au@Pt@UiO-66-NH₂ with Pt shell on Au (599 μmol g_metal⁻¹ h⁻¹) and Au@UiO-66-NH₂ (218 μmol g_metal⁻¹ h⁻¹). The outstanding performances of AuPt@UiO-66-NH₂ were attributed to the synergetic effect originating from the plasmonic metal Au, doped active metal Pt, and encapsulation structure of UiO-66-NH₂ shell. This work provides a new way for photothermal catalysis of CO₂ and a reference for the design of high-performance plasmonic catalysts.     

Non-Interacting Ni and Fe Dual-Atom Pair Sites in N-Doped Carbon Catalysts for Efficient Concentrating Solar-Driven Photothermal CO2 Reduction

Solar-to-chemical energy conversion under weak solar irradiation is generally difficult to meet the heat demand of CO₂ reduction. Herein, a new concentrated solar-driven photothermal system coupling a dual-metal single-atom catalyst (DSAC) with adjacent Ni−N₄ and Fe−N₄ pair sites is designed for boosting gas-solid CO₂ reduction with H₂O under simulated solar irradiation, even under ambient sunlight. As expected, the (Ni, Fe)−N−C DSAC exhibits a superior photothermal catalytic performance for CO₂ reduction to CO (86.16 μmol g⁻¹ h⁻¹), CH₄ (135.35 μmol g⁻¹ h⁻¹) and CH₃OH (59.81 μmol g⁻¹ h⁻¹), which are equivalent to 1.70-fold, 1.27-fold and 1.23-fold higher than those of the Fe−N−C catalyst, respectively. Based on theoretical simulations, the Fermi level and d-band center of Fe atom is efficiently regulated in non-interacting Ni and Fe dual-atom pair sites with electronic interaction through electron orbital hybridization on (Ni, Fe)−N−C DSAC. Crucially, the distance between adjacent Ni and Fe atoms of the Ni−N−N−Fe configuration means that the additional Ni atom as a new active site contributes to the main *COOH and *HCO₃ dissociation to optimize the corresponding energy barriers in the reaction process, leading to specific dual reaction pathways (COOH and HCO₃ pathways) for solar-driven photothermal CO₂ reduction to initial CO production.     

Strong-Base-Assisted Synthesis of a Crystalline Covalent Triazine Framework with High Hydrophilicity via Benzylamine Monomer for Photocatalytic Water Splitting

Methods to synthesize crystalline covalent triazine frameworks (CTFs) are limited and little attention has been paid to development of hydrophilic CTFs and photocatalytic overall water splitting. A route to synthesize crystalline and hydrophilic CTF-HUST-A1 with a benzylamine-functionalized monomer is presented. The base reagent used plays an important role in the enhancement of crystallinity and hydrophilicity. CTF-HUST-A1 exhibits good crystallinity, excellent hydrophilicity, and excellent photocatalytic activity in sacrificial photocatalytic hydrogen evolution (hydrogen evolution rate up to 9200 μmol g⁻¹ h⁻¹). Photocatalytic overall water splitting is achieved by depositing dual co-catalysts in CTF-HUST-A1, with H₂ evolution and O₂ evolution rates of 25.4 μmol g⁻¹ h⁻¹ and 12.9 μmol g⁻¹ h⁻¹ in pure water without using sacrificial agent.     

POM‐Incorporated CoO Nanowires for Enhanced Photocatalytic Syngas Production from CO2

Utilizing sustainable energy for chemical activation of small molecules, such as CO₂, to produce important chemical feedstocks is highly desirable. The simultaneous production of CO/H₂ mixture (syngas) from photoreduction of CO₂ and H₂O is highly promising. However, the relationships between structure, composition, crystallinity, and photocatalytic performance are still indistinct. Here, amorphous ultrathin CoO nanowires and polyoxometalate incorporated nanowires with even lower crystallinity were synthesized. The POM‐incorporated ultrathin nanowires exhibit high photocatalytic syngas production activity, reaching H₂ and CO evolution rates of 11555 and 4165 μmol g^?1 h^?1 respectively. Further experiments indicate that the ultrathin morphology and incorporation of POM both contribute to the superior performance. Multiple characterizations reveal the enhanced charge–hole separation efficiency of the catalyst would facilitate the photocatalysis.     

Significant Acceleration of Photocatalytic CO2 Reduction at the Gas-Liquid Interface of Microdroplets**

Solar-driven CO₂ reduction reaction (CO₂RR) is largely constrained by the sluggish mass transfer and fast combination of photogenerated charge carriers. Herein, we find that the photocatalytic CO₂RR efficiency at the abundant gas-liquid interface provided by microdroplets is two orders of magnitude higher than that of the corresponding bulk phase reaction. Even in the absence of sacrificial agents, the production rates of HCOOH over WO₃ ⋅ 0.33H₂O mediated by microdroplets reaches 2536 μmol h⁻¹ g⁻¹ (vs. 13 μmol h⁻¹ g⁻¹ in bulk phase), which is significantly superior to the previously reported photocatalytic CO₂RR in bulk phase reaction condition. Beyond the efficient delivery of CO₂ to photocatalyst surfaces within microdroplets, we reveal that the strong electric field at the gas-liquid interface of microdroplets essentially promotes the separation of photogenerated electron-hole pairs. This study provides a deep understanding of ultrafast reaction kinetics promoted by the gas-liquid interface of microdroplets and a novel way of addressing the low efficiency of photocatalytic CO₂ reduction to fuel.     

Experimental Evidence of CO2 Photoreduction Activity of SnO2 Nanoparticles

Tin dioxide (SnO₂) has intrinsic characteristics that do not favor its photocatalytic activity. However, we evidenced that surface modification can positively influence its performance for CO₂ photoreduction in the gas phase. The hydroxylation of the SnO₂ surface played a role in the CO₂ affinity decreasing its reduction potential. The results showed that a certain selectivity for methane (CH₄), carbon monoxide (CO), and ethylene (C₂H₄) is related to different SnO₂ hydrothermal annealing. The best performance was seen for SnO₂ annealed at 150 °C, with a production of 20.4 μmol g⁻¹ for CH₄ and 16.45 μmol g⁻¹ for CO, while for SnO₂ at 200 °C the system produced more C₂H₄, probably due to a decrease of surface −OH groups.     

Visible Light-Driven Conversion of Carbon-Sequestrated Seawater into Stoichiometric CO and HClO with Nitrogen-Doped BiOCl Atomic Layers

Seawater is one of the most important CO₂ sequestration media for delivering value-added chemicals/fuels and active chlorine; however, this scenario is plagued by sluggish reaction rates and poor product selectivity. Herein, we first report the synthesis of nitrogen-doped BiOCl atomic layers to directly split carbon-sequestrated natural seawater (Yellow Sea, China) into stoichiometric CO (92.8 μmol h⁻¹) and HClO (83.2 μmol h⁻¹) under visible light with selectivities greater than 90 %. Photoelectrons enriched on the exposed BiOCl{001} facet kinetically facilitate CO₂-to-CO reduction via surface-doped nitrogen bearing Lewis basicity. Photoholes, mainly located on the lateral facets of van der Waals gaps, promote the selective oxidation of Cl⁻ into HClO. Sequestrated CO₂ also maintains the pH of seawater at around 4.2 to prevent the alkaline earth cations from precipitating. The produced HClO can effectively kill typical bacteria in the ballast water of ocean-going cargo ships, offering a green and safe way for onsite sterilization.     

Wurtzite CuGaS2 with an In-Situ-Formed CuO Layer Photocatalyzes CO2 Conversion to Ethylene with High Selectivity

We present surface reconstruction-induced C−C coupling whereby CO₂ is converted into ethylene. The wurtzite phase of CuGaS_2. undergoes in situ surface reconstruction, leading to the formation of a thin CuO layer over the pristine catalyst, which facilitates selective conversion of CO₂ to ethylene (C₂H₄). Upon illumination, the catalyst efficiently converts CO₂ to C₂H₄ with 75.1 % selectivity (92.7 % selectivity in terms of R_electron) and a 20.6 μmol g⁻¹ h⁻¹ evolution rate. Subsequent spectroscopic and microscopic studies supported by theoretical analysis revealed operando-generated Cu²⁺, with the assistance of existing Cu⁺, functioning as an anchor for the generated *CO and thereby facilitating C−C coupling. This study demonstrates strain-induced in situ surface reconstruction leading to heterojunction formation, which finetunes the oxidation state of Cu and modulates the CO₂ reduction reaction pathway to selective formation of ethylene.     

In Situ Preparation of CsPbBr3@CsPb2Br5 Composite Assisted with Water as a Highly Efficient and Stable Catalyst for Photothermal CO2 Hydrogenation

Lead halide perovskite has triggered a lot of research due to its superior optical properties. However, halide perovskite materials have poor environmental stabilities and are easily affected by external factors such as water and heat, resulting in structural decomposition and performance failure. Contrary to this commonplace concept, it is found that CsPbBr₃ (CPB) can convert to CsPb₂Br₅ (CP2B5) partially when meeting a small amount of water, and the CsPbBr₃@CsPb₂Br₅ (CPB@CP2B5) composite is synthesized by an in situ method accordingly. The CPB@CP2B5 composite shows an enhanced catalytic performance compared with pure CPB, as well as a dramatically synergistic effect of photo and thermal for catalytic CO₂ hydrogenation. The CO production rate of CPB@CP2B5 is determined as 69 μmol g⁻¹ h⁻¹ under light irradiation at 200 °C, which is 156.8 and 43.4 times higher than that under pure photo (0.44 μmol g⁻¹ h ⁻¹) and pure thermal (1.59 μmol g⁻¹ h ⁻¹) condition, respectively. Meanwhile, the CPB@CP2B5 sample is also stable, which shows no significant decline in the catalytic activity during 8 cycles of repeated experiments. The probable mechanism is explored by utilizing a series of in situ characterizations.     

Directed Electron Delivery from a Pb-Free Halide Perovskite to a Co(II) Molecular Catalyst Boosts CO2 Photoreduction Coupled with Water Oxidation

The development of high-performance photocatalytic systems for CO₂ reduction is appealing to address energy and environmental issues, while it is challenging to avoid using toxic metals and organic sacrificial reagents. We here immobilize a family of cobalt phthalocyanine catalysts on Pb-free halide perovskite Cs₂AgBiBr₆ nanosheets with delicate control on the anchors of the cobalt catalysts. Among them, the molecular hybrid photocatalyst assembled by carboxyl anchors achieves the optimal performance with an electron consumption rate of 300±13 μmol g⁻¹ h⁻¹ for visible-light-driven CO₂-to-CO conversion coupled with water oxidation to O₂, over 8 times of the unmodified Cs₂AgBiBr₆ (36±8 μmol g⁻¹ h⁻¹), also far surpassing the documented systems (<150 μmol g⁻¹ h⁻¹). Besides the improved intrinsic activity, electrochemical, computational, ex-/in situ X-ray photoelectron and X-ray absorption spectroscopic results indicate that the electrons photogenerated at the Bi atoms of Cs₂AgBiBr₆ can be directionally transferred to the cobalt catalyst via the carboxyl anchors which strongly bind to the Bi atoms, substantially facilitating the interfacial electron transfer kinetics and thereby the photocatalysis.     

A Fully Conjugated Covalent Organic Framework with Oxidative and Reductive Sites for Photocatalytic Carbon Dioxide Reduction with Water

Constructing a powerful photocatalytic system that can achieve the carbon dioxide (CO₂) reduction half-reaction and the water (H₂O) oxidation half-reaction simultaneously is a very challenging but meaningful task. Herein, a porous material with a crystalline topological network, named viCOF-bpy-Re, was rationally synthesized by incorporating rhenium complexes as reductive sites and triazine ring structures as oxidative sites via robust −C=C− bond linkages. The charge-separation ability of viCOF-bpy-Re is promoted by low polarized π-bridges between rhenium complexes and triazine ring units, and the efficient charge-separation enables the photogenerated electron–hole pairs, followed by an intramolecular charge-transfer process, to form photogenerated electrons involved in CO₂ reduction and photogenerated holes that participate in H₂O oxidation simultaneously. The viCOF-bpy-Re shows the highest catalytic photocatalytic carbon monoxide (CO) production rate (190.6 μmol g⁻¹ h⁻¹ with about 100 % selectivity) and oxygen (O₂) evolution (90.2 μmol g⁻¹ h⁻¹) among all the porous catalysts in CO₂ reduction with H₂O as sacrificial agents. Therefore, a powerful photocatalytic system was successfully achieved, and this catalytic system exhibited excellent stability in the catalysis process for 50 hours. The structure–function relationship was confirmed by femtosecond transient absorption spectroscopy and density functional theory calculations.     

Few-Layer Fullerene Network for Photocatalytic Pure Water Splitting into H2 and H2O2

A few-layer fullerene network possesses several advantageous characteristics, including a large surface area, abundant active sites, high charge mobility, and an appropriate band gap and band edge for solar water splitting. Herein, we report for the first time that the few-layer fullerene network shows interesting photocatalytic performance in pure water splitting into H₂ and H₂O₂ in the absence of any sacrificial reagents. Under optimal conditions, the H₂ and H₂O₂ evolution rates can reach 91 and 116 μmol g⁻¹ h⁻¹, respectively, with good stability. This work demonstrates the novel application of the few-layer fullerene network in the field of energy conversion.     

Photo-Induced Switching of CO2 Hydrogenation Pathway towards CH3OH Production over Pt@UiO-66-NH2(Co)

It is highly desired to achieve controllable product selectivity in CO₂ hydrogenation. Herein, we report light-induced switching of reaction pathways of CO₂ hydrogenation towards CH₃OH production over actomically dispersed Co decorated Pt@UiO-66-NH₂. CO, being the main product in the reverse water gas shift (RWGS) pathway under thermocatalysis condition, is switched to CH₃OH via the formate pathway with the assistance of light irradiation. Impressively, the space-time yield of CH₃OH in photo-assisted thermocatalysis (1916.3 μmol g_cat⁻¹ h⁻¹) is about 7.8 times higher than that without light at 240 °C and 1.5 MPa. Mechanism investigation indicates that upon light irradiation, excited UiO-66-NH₂ can transfer electrons to Pt nanoparticles and Co sites, which can efficiently catalyze the critical elementary steps (i.e., CO₂-to-*HCOO conversion), thus suppressing the RWGS pathway to achieve a high CH₃OH selectivity.     

Photothermal Conversion of CO2 into CH4 with H2 over Group VIII Nanocatalysts: An Alternative Approach for Solar Fuel Production

The photothermal conversion of CO₂ provides a straightforward and effective method for the highly efficient production of solar fuels with high solar‐light utilization efficiency. This is due to several crucial features of the Group VIII nanocatalysts, including effective energy utilization over the whole range of the solar spectrum, excellent photothermal performance, and unique activation abilities. Photothermal CO₂ reaction rates (mol h^?1 g^?1) that are several orders of magnitude larger than those obtained with photocatalytic methods (μmol h^?1 g^?1) were thus achieved. It is proposed that the overall water‐based CO₂ conversion process can be achieved by combining light‐driven H₂ production from water and photothermal CO₂ conversion with H₂. More generally, this work suggests that traditional catalysts that are characterized by intense photoabsorption will find new applications in photo‐induced green‐chemistry processes.     

Disclosing Support-Size-Dependent Effect on Ambient Light-Driven Photothermal CO2 Hydrogenation over Nickel/Titanium Dioxide

The size of support in heterogeneous catalysts can strongly affect the catalytic property but is rarely explored in light-driven catalysis. Herein, we demonstrate the size of TiO₂ support governs the selectivity in photothermal CO₂ hydrogenation by tuning the metal-support interactions (MSI). Small-size TiO₂ loading nickel (Ni/TiO₂-25) with enhanced MSI promotes photo-induced electrons of TiO₂ migrating to Ni nanoparticles, thus favoring the H₂ cleavage and accelerating the CH₄ formation (227.7 mmol g⁻¹ h⁻¹) under xenon light-induced temperature of 360 °C. Conversely, Ni/TiO₂-100 with large TiO₂ prefers yielding CO (94.2 mmol g⁻¹ h⁻¹) due to weak MSI, inefficient charge separation, and inadequate supply of activated hydrogen. Under ambient solar irradiation, Ni/TiO₂-25 achieves the optimized CH₄ rate (63.0 mmol g⁻¹ h⁻¹) with selectivity of 99.8 %, while Ni/TiO₂-100 exhibits the CO selectivity of 90.0 % with rate of 30.0 mmol g⁻¹ h⁻¹. This work offers a novel approach to tailoring light-driven catalytic properties by support size effect.     

Electrochemical Conversion of CO2 to Syngas with Controllable CO/H2 Ratios over Co and Ni Single-Atom Catalysts

The electrochemical CO₂ reduction reaction (CO₂RR) to yield synthesis gas (syngas, CO and H₂) has been considered as a promising method to realize the net reduction in CO₂ emission. However, it is challenging to balance the CO₂RR activity and the CO/H₂ ratio. To address this issue, nitrogen-doped carbon supported single-atom catalysts are designed as electrocatalysts to produce syngas from CO₂RR. While Co and Ni single-atom catalysts are selective in producing H₂ and CO, respectively, electrocatalysts containing both Co and Ni show a high syngas evolution (total current >74 mA cm⁻²) with CO/H₂ ratios (0.23–2.26) that are suitable for typical downstream thermochemical reactions. Density functional theory calculations provide insights into the key intermediates on Co and Ni single-atom configurations for the H₂ and CO evolution. The results present a useful case on how non-precious transition metal species can maintain high CO₂RR activity with tunable CO/H₂ ratios.     

Solar-Driven CO2 Conversion via Optimized Photothermal Catalysis in a Lotus Pod Structure

Photothermal CO₂ reduction is one of the most promising routes to efficiently utilize solar energy for fuel production at high rates. However, this reaction is currently limited by underdeveloped catalysts with low photothermal conversion efficiency, insufficient exposure of active sites, low active material loading, and high material cost. Herein, we report a potassium-modified carbon-supported cobalt (K⁺−Co−C) catalyst mimicking the structure of a lotus pod that addresses these challenges. As a result of the designed lotus-pod structure which features an efficient photothermal C substrate with hierarchical pores, an intimate Co/C interface with covalent bonding, and exposed Co catalytic sites with optimized CO binding strength, the K⁺−Co−C catalyst shows a record-high photothermal CO₂ hydrogenation rate of 758 mmol g_cat⁻¹ h⁻¹ (2871 mmol g_Co⁻¹ h⁻¹) with a 99.8 % selectivity for CO, three orders of magnitude higher than typical photochemical CO₂ reduction reactions. We further demonstrate with this catalyst effective CO₂ conversion under natural sunlight one hour before sunset during the winter season, putting forward an important step towards practical solar fuel production.     

Eosin Y‐Functionalized Conjugated Organic Polymers for Visible‐Light‐Driven CO2 Reduction with H2O to CO with High Efficiency

Visible‐light‐driven photoreduction of CO₂ to energy‐rich chemicals in the presence of H₂O without any sacrifice reagent is of significance, but challenging. Herein, Eosin Y‐functionalized porous polymers (PEosinY‐N, N=1–3), with high surface areas up to 610 m² g^?1, are reported. They exhibit high activity for the photocatalytic reduction of CO₂ to CO in the presence of gaseous H₂O, without any photosensitizer or sacrifice reagent, and under visible‐light irradiation. Especially, PEosinY‐1 derived from coupling of Eosin Y with 1,4‐diethynylbenzene shows the best performance for the CO₂ photoreduction, affording CO as the sole carbonaceous product with a production rate of 33 μmol g^?1 h^?1 and a selectivity of 92 %. This work provides new insight for designing and fabricating photocatalytically active polymers with high efficiency for solar‐energy conversion.     

Organic Polymer Dots Photocatalyze CO2 Reduction in Aqueous Solution

Developing low-cost and efficient photocatalysts to convert CO₂ into valuable fuels is desirable to realize a carbon-neutral society. In this work, we report that polymer dots (Pdots) of poly[(9,9′-dioctylfluorenyl-2,7-diyl)-co-(1,4-benzo-thiadiazole)] (PFBT), without adding any extra co-catalyst, can photocatalyze reduction of CO₂ into CO in aqueous solution, rendering a CO production rate of 57 μmol g⁻¹ h⁻¹ with a detectable selectivity of up to 100 %. After 5 cycles of CO₂ re-purging experiments, no distinct decline in CO amount and reaction rate was observed, indicating the promising photocatalytic stability of PFBT Pdots in the photocatalytic CO₂ reduction reaction. A mechanistic study reveals that photoexcited PFBT Pdots are reduced by sacrificial donor first, then the reduced PFBT Pdots can bind CO₂ and reduce it into CO via their intrinsic active sites. This work highlights the application of organic Pdots for CO₂ reduction in aqueous solution, which therefore provides a strategy to develop highly efficient and environmentally friendly nanoparticulate photocatalysts for CO₂ reduction.