A Systematic Study of Coumarin–Tetrazine Light-Up Probes for Bioorthogonal Fluorescence Imaging

Fluorescent probes that light-up upon reaction with complementary bioorthogonal reagents are superior tools for no-wash fluorogenic bioimaging applications. In this work, a thorough study is presented on a set of seventeen structurally diverse coumarin–tetrazine probes that produce fluorescent dyes with exceptional turn-on ratios when reacted with trans-cyclooctene (TCO) and bicyclononyne (BCN) dienophiles. In general, formation of the fully aromatic pyridazine-containing dyes resulting from the reaction with BCN was found superior in terms of fluorogenicity. However, evaluation of the probes in cellular imaging experiments revealed that other factors, such as reaction kinetics and good cell permeability, prevail over the fluorescence turn-on properties. The best compound identified in this study showed excellent performance in live cell-labeling experiments and enabled no-wash fluorogenic imaging on a timescale of seconds.     

Conferring Phosphorogenic Properties on Iridium(III)‐Based Bioorthogonal Probes through Modification with a Nitrone Unit

The use of bioorthogonal probes that display fluorogenic or phosphorogenic properties is advantageous to the labeling and imaging of biomolecules in live cells and organisms. Herein we present the design of three iridium(III) complexes containing a nitrone moiety as novel phosphorogenic bioorthogonal probes. These probes were non‐emissive owing to isomerization of the C=N group but showed significant emission enhancement upon cycloaddition reaction with strained cyclooctynes. Interestingly, the connection of the nitrone ligand to the cationic iridium(III) center led to accelerated reaction kinetics. These nitrone complexes were also identified as phosphorogenic bioorthogonal labels and imaging reagents for cyclooctyne‐modified proteins. These findings contribute to the development of phosphorogenic bioorthogonal probes and imaging reagents.     

Ultrafluorogenic Coumarin–Tetrazine Probes for Real‐Time Biological Imaging

We have developed a series of new ultrafluorogenic probes in the blue‐green region of the visible‐light spectrum that display fluorescence enhancement exceeding 11 000‐fold. These fluorogenic dyes integrate a coumarin fluorochrome with the bioorthogonal trans‐cyclooctene(TCO)–tetrazine chemistry platform. By exploiting highly efficient through‐bond energy transfer (TBET), these probes exhibit the highest brightness enhancements reported for any bioorthogonal fluorogenic dyes. No‐wash, fluorogenic imaging of diverse targets including cell‐surface receptors in cancer cells, mitochondria, and the actin cytoskeleton is possible within seconds, with minimal background signal and no appreciable nonspecific binding, opening the possibility for in vivo sensing.     

Tetrazine Carbon Nanotubes for Pretargeted In Vivo “Click-to-Release” Bioorthogonal Tumour Imaging

The bioorthogonal inverse-electron-demand Diels–Alder (IEDDA) cleavage reaction between tetrazine and trans-cyclooctene (TCO) is a powerful way to control the release of bioactive agents and imaging probes. In this study, a pretargeted activation strategy using single-walled carbon nanotubes (SWCNTs) that bear tetrazines (TZ@SWCNTs) and a TCO-caged molecule was used to deliver active effector molecules. To optimize a turn-on signal by using in vivo fluorescence imaging, we developed a new fluorogenic near-infrared probe that can be activated by bioorthogonal chemistry and image tumours in mice by caging hemicyanine with TCO (tHCA). With our pretargeting strategy, we have shown selective doxorubicin prodrug activation and instantaneous fluorescence imaging in living cells. By combining a tHCA probe and a pretargeted bioorthogonal approach, real-time, non-invasive tumour visualization with a high target-to-background ratio was achieved in a xenograft mice tumour model. The combined advantages of enhanced stability, kinetics and biocompatibility, and the superior pharmacokinetics of tetrazine-functionalised SWCNTs could allow application of targeted bioorthogonal decaging approaches with minimal off-site activation of fluorophore/drug.     

A general strategy for in situ assembly of light-up fluorophores via bioorthogonal Suzuki-Miyaura cross-coupling

Herein we presented a general strategy for in situ assembly of intramolecular charge-transfer (ICT)-based light-up fluorophores via bioorthogonal Suzuki-Miyaura cross-coupling reaction. By introducing iodo group at the appropriate position, five fluorophores with different scaffolds including naphthalimide, coumarin, naphthalene sulfonate, nitrobenzoxadiazole, and acetonaphthone, were designed as bioorthogonal multicolor fluorogenic probes, which could produce significant fluorescence enhancement and high fluorescence quantum yield after Suzuki-Miyaura reaction with aryl boronic acid or boronate. Manipulating the substituents and π scaffold in the fluorophores allows fine-tuning of their photophysical properties. With this strategy, we succeeded in peptide conjugation, no-wash fluorogenic protein labeling, and mitochondria-selective bioorthogonal imaging in live cells.     

Tetrazine Carbon Nanotubes for Pretargeted In Vivo “Click‐to‐Release” Bioorthogonal Tumour Imaging

The bioorthogonal inverse‐electron‐demand Diels–Alder (IEDDA) cleavage reaction between tetrazine and trans‐cyclooctene (TCO) is a powerful way to control the release of bioactive agents and imaging probes. In this study, a pretargeted activation strategy using single‐walled carbon nanotubes (SWCNTs) that bear tetrazines (TZ@SWCNTs) and a TCO‐caged molecule was used to deliver active effector molecules. To optimize a turn‐on signal by using in vivo fluorescence imaging, we developed a new fluorogenic near‐infrared probe that can be activated by bioorthogonal chemistry and image tumours in mice by caging hemicyanine with TCO (tHCA). With our pretargeting strategy, we have shown selective doxorubicin prodrug activation and instantaneous fluorescence imaging in living cells. By combining a tHCA probe and a pretargeted bioorthogonal approach, real‐time, non‐invasive tumour visualization with a high target‐to‐background ratio was achieved in a xenograft mice tumour model. The combined advantages of enhanced stability, kinetics and biocompatibility, and the superior pharmacokinetics of tetrazine‐functionalised SWCNTs could allow application of targeted bioorthogonal decaging approaches with minimal off‐site activation of fluorophore/drug.     

Overview of Syntheses and Molecular-Design Strategies for Tetrazine-Based Fluorogenic Probes

Various bioorthogonal chemistries have been used for fluorescent imaging owing to the advantageous reactions they employ. Recent advances in bioorthogonal chemistry have revolutionized labeling strategies for fluorescence imaging, with inverse electron demand Diels–Alder (iEDDA) reactions in particular attracting recent attention owing to their fast kinetics and excellent specificity. One of the most interesting features of the iEDDA labeling strategy is that tetrazine-functionalized dyes are known to act as fluorogenic probes. In this review, we will focus on the synthesis, molecular-design strategies, and bioimaging applications of tetrazine-functionalized fluorogenic probes. Traditional Pinner reaction and “Pinner-like” reactions for tetrazine synthesis are discussed here, as well as metal-catalyzed C–C bond formations with convenient tetrazine intermediates and the fabrication of tetrazine-conjugated fluorophores. In addition, four different quenching mechanisms for tetrazine-modified fluorophores are presented.     

A Concerted Enzymatic and Bioorthogonal Approach for Extra- and Intracellular Activation of Environment-Sensitive Ruthenium(II)-Based Imaging Probes and Photosensitizers

In this article, we report a novel targeting strategy involving the combination of an enzyme-instructed self-assembly (EISA) moiety and a strained cycloalkyne to generate large accumulation of bioorthogonal sites in cancer cells. These bioorthogonal sites can serve as activation triggers in different regions for transition metal-based probes, which are new ruthenium(II) complexes carrying a tetrazine unit for controllable phosphorescence and singlet oxygen generation. Importantly, the environment-sensitive emission of the complexes can be further enhanced in the hydrophobic regions offered by the large supramolecular assemblies, which is highly advantageous to biological imaging. Additionally, the (photo)cytotoxicity of the large supramolecular assemblies containing the complexes was investigated, and the results illustrate that cellular localization (extracellular and intracellular) imposes a profound impact on the efficiencies of photosensitizers.     

Color-Tunable Light-up Bioorthogonal Probes for In Vivo Two-Photon Fluorescence Imaging

Light-up bioorthogonal probes have attracted increasing attention recently due to their capability to directly image diverse biomolecules in living cells without washing steps. The development of bioorthogonal probes with excellent fluorescent properties suitable for in vivo imaging, such as long excitation/emission wavelength, high fluorescence turn-on ratio, and deep penetration, has been rarely reported. Herein, a series of azide-based light-up bioorthogonal probes with tunable colors based on a weak fluorescent 8-aminoquinoline ( AQ ) scaffold were designed and synthesized. The azido quinoline derivatives are able to induce large fluorescence enhancement (up to 1352-fold) after click reaction with alkynes. In addition, the probes could be engineered to exhibit excellent two-photon properties (δ=542 GM at 780 nm) after further introducing different styryl groups into the AQ scaffold. Subsequent detailed bioimaging experiments demonstrated that these versatile probes can be successfully used for live cell/zebrafish imaging without washing steps. Further in vivo two-photon imaging experiments demonstrated that these light-up biorthogonal probe outperformed conventional fluorophores, for example, high signal-to-noise ratio and deep tissue penetration. The design strategy reported in this study is a useful approach to realize diverse high-performance biorthogonal light-up probes for in vivo studying.     

Super-Resolution Tension PAINT Imaging with a Molecular Beacon

DNA-PAINT enabled super-resolution imaging through the transient binding of fluorescently-labelled single-stranded DNA (ssDNA) imagers to target ssDNA. However, its performance is constrained by imager background fluorescence, resulting in relatively long image acquisition and potential artifacts. We designed a molecular beacon (MB) as the PAINT imager. Unbound MB in solution reduces the background fluorescence due to its natively quenched state. They are fluorogenic upon binding to target DNA to create individual fluorescence events. We demonstrate that MB-PAINT provides localization precision similar to traditional linear imager DNA-PAINT. We also show that MB-PAINT is ideally suited for fast super-resolution imaging of molecular tension probes in living cells, eliminating the potential of artifacts from free-diffusing imagers in traditional DNA-PAINT at the cell-substrate interface.     

A Double‐Clicking Bis‐Azide Fluorogenic Dye for Bioorthogonal Self‐Labeling Peptide Tags

Herein, we give the very first example for the development of a fluorogenic molecular probe that combines the two‐point binding specificity of biarsenical‐based dyes with the robustness of bioorthogonal click‐chemistry. This proof‐of‐principle study reports on the synthesis and fluorogenic characterization of a new, double‐quenched, bis‐azide fluorogenic probe suitable for bioorthogonal two‐point tagging of small peptide tags by double strain‐promoted azide–alkyne cycloaddition. The presented probe exhibits remarkable increase in fluorescence intensity when reacted with bis‐cyclooctynylated peptide sequences, which could also serve as possible self‐labeling small peptide tag motifs.     

Bioorthogonal Turn‐On Probe Based on Aggregation‐Induced Emission Characteristics for Cancer Cell Imaging and Ablation

Bioorthogonal turn‐on probes have been widely utilized in visualizing various biological processes. Most of the currently available bioorthogonal turn‐on probes are blue or green emissive fluorophores with azide or tetrazine as functional groups. Herein, we present an alternative strategy of designing bioorthogonal turn‐on probes based on red‐emissive fluorogens with aggregation‐induced emission characteristics (AIEgens). The probe is water soluble and non‐fluorescent due to the dissipation of energy through free molecular motion of the AIEgen, but the fluorescence is immediately turned on upon click reaction with azide‐functionalized glycans on cancer cell surface. The fluorescence turn‐on is ascribed to the restriction of molecular motion of AIEgen, which populates the radiative decay channel. Moreover, the AIEgen can generate reactive oxygen species (ROS) upon visible light (λ=400–700 nm) irradiation, demonstrating its dual role as an imaging and phototherapeutic agent.     

Design of a 1,8-naphthalimide-based OFF-ON type bioorthogonal reagent for fluorescent imaging in live cells

A novel 1,8-naphthalimide-based OFF-ON type fluorogenic sydnone (Naph-Syd) is designed as bioorthogonal probe for imaging. Sydnone moiety efficiently quenches the native fluorescence of 1,8-naphthalimide, which can be restored with the enhancement of about 300-fold, after reacting with strained cyclooctynes to form pyrazole products (Naph-Pyr). The second-order rate constant of this bioorthogonal cycloaddition can be up to 2.5 L mol^?1 s^?1, which benefits imaging of biomolecules at low concentrations in cellular environment.     

Design of a 1,8-naphthalimide-based OFF-ON type bioorthogonal reagent for fluorescent imaging in live cells

A novel 1,8-naphthalimide-based OFF-ON type fluorogenic sydnone (Naph-Syd) as bioorthogonal probe has been developed, which can be triggered by fast cycloaddition reactions with strained alkynes for imaging of biomolecules in cellular environment.     

SNAP-tag fluorogenic probes for wash free protein labeling

In this review, we described the design strategies of SNAP-tag fl uorogenic probes with turn-on fl uorescence responses, which minimized the fl uorescence background and allowed for direct imaging in living cells without wash-out steps. These probes can apply in real-time analysis of protein localization, dynamics, and protein– protein interactions in living cells. Furthermore, the excellent fl uorescent properties made it possible to apply some of the probes in super-resolution fl uorescence imaging.     

A Far-Red Molecular Rotor Fluorogenic Trehalose Probe for Live Mycobacteria Detection and Drug-Susceptibility Testing

Increasing the speed, specificity, sensitivity, and accessibility of mycobacteria detection tools are important challenges for tuberculosis (TB) research and diagnosis. In this regard, previously reported fluorogenic trehalose analogues have shown potential, but their green-emitting dyes may limit sensitivity and applications in complex settings. Here, we describe a trehalose-based fluorogenic probe featuring a molecular rotor turn-on fluorophore with bright far-red emission (RMR-Tre). RMR-Tre, which exploits the unique biosynthetic enzymes and environment of the mycobacterial outer membrane to achieve fluorescence activation, enables fast, no-wash, low-background fluorescence detection of live mycobacteria. Aided by the red-shifted molecular rotor fluorophore, RMR-Tre exhibited up to a 100-fold enhancement in M. tuberculosis labeling compared to existing fluorogenic trehalose probes. We show that RMR-Tre reports on M. tuberculosis drug resistance in a facile assay, demonstrating its potential as a TB diagnostic tool.     

Two successive reactions on a DNA template: a strategy for improving background fluorescence and specificity in nucleic acid detection

We report a new strategy for template-mediated fluorogenic chemistry that results in enhanced performance for the fluorescence detection of nucleic acids. In this approach, two successive templated reactions are required to induce a fluorescence signal, rather than only one. These novel fluorescein-labeled oligonucleotide probes, termed 2-STAR (STAR = Staudinger-triggered α-azidoether release) probes, contain two quencher groups tethered by separate reductively cleavable linkers. When a 2-STAR quenched probe successively binds adjacent to two mono-triphenylphosphine-(TPP)-DNAs or one dual-TPP-DNA, the two quenchers are released, resulting in a fluorescence signal. Because of the requirement for two consecutive reactions, 2-STAR probes display an unprecedented level of sequence specificity for template-mediated probe designs. At the same time, background emission generated by off-template reactions or incomplete quenching is among the lowest of any fluorogenic reactive probes for the detection of DNA or RNA.     

Redesign of a Fluorogenic Labeling System To Improve Surface Charge,Brightness, and Binding Kinetics for Imaging the Functional Localization of Bromodomains

Protein labeling with fluorogenic probes is a powerful method for the imaging of cellular proteins. The labeling time and fluorescence contrast of the fluorogenic probes are critical factors for the precise spatiotemporal imaging of protein dynamics in living cells. To address these issues, we took mutational and chemical approaches to increase the labeling kinetics and fluorescence intensity of fluorogenic PYP‐tag probes. Because of charge‐reversal mutations in PYP‐tag and probe redesign, the labeling reaction was accelerated by a factor of 18 in vitro, and intracellular proteins were detected with an incubation period of only 1 min. The brightness of the probe both in vitro and in living cells was enhanced by the mutant tag. Furthermore, we applied this system to the imaging analysis of bromodomains. The labeled mutant tag successfully detected the localization of bromodomains to acetylhistone and the disruption of the bromodomain–acetylhistone interaction by a bromodomain inhibitor.     

Redesign of a Fluorogenic Labeling System To Improve Surface Charge,Brightness, and Binding Kinetics for Imaging the Functional Localization of Bromodomains

Protein labeling with fluorogenic probes is a powerful method for the imaging of cellular proteins. The labeling time and fluorescence contrast of the fluorogenic probes are critical factors for the precise spatiotemporal imaging of protein dynamics in living cells. To address these issues, we took mutational and chemical approaches to increase the labeling kinetics and fluorescence intensity of fluorogenic PYP‐tag probes. Because of charge‐reversal mutations in PYP‐tag and probe redesign, the labeling reaction was accelerated by a factor of 18 in vitro, and intracellular proteins were detected with an incubation period of only 1 min. The brightness of the probe both in vitro and in living cells was enhanced by the mutant tag. Furthermore, we applied this system to the imaging analysis of bromodomains. The labeled mutant tag successfully detected the localization of bromodomains to acetylhistone and the disruption of the bromodomain–acetylhistone interaction by a bromodomain inhibitor.     

New Red‐Emitting Tetrazine‐Phenoxazine Fluorogenic Labels for Live‐Cell Intracellular Bioorthogonal Labeling Schemes

The synthesis of a set of tetrazine‐bearing fluorogenic dyes suitable for intracellular labeling of proteins in live cells is presented. The red excitability and emission properties ensure minimal autofluorescence, while through‐bond energy‐transfer‐based fluorogenicity reduces nonspecific background fluorescence of unreacted dyes. The tetrazine motif efficiently quenches fluorescence of the phenoxazine core, which can be selectively turned on chemically upon bioorthogonal inverse‐electron‐demand Diels–Alder reaction with proteins modified genetically with strained trans‐cyclooctenes.