Self-assembled germanium nano-clusters on silver(1 1 0)

The adsorption of germanium on Ag(1 1 0) has been investigated by scanning tunnelling microscopy (STM), as well as surface X-ray diffraction (SXRD). At 0.5 germanium monolayer (ML) coverage, Low Energy Electron Diffraction (LEED) patterns reveals a sharp c(4 × 2) superstructure. Based on STM images and SXRD measurements, we present an atomic model of the surface structure with Ge atoms forming tetramer nano-clusters perfectly assembled in a two-dimensional array over the silver top layer. The adsorption of the germanium atoms induces a weak perturbation of the Ag surface. Upon comparison with results obtained on the (1 1 1) and (1 0 0) faces, we stress the role played by the relative interactions between silver and germanium on the observed surface structures.     

SrTiO3(0 0 1) reconstructions: the (2 × 2) to c(4 × 4) transition

Scanning tunneling microscopy (STM) is used to investigate the (0 0 1) surface structure of Nb doped SrTiO₃ single crystals annealed in ultra high vacuum (UHV). Atomically resolved images of the (2 × 2) reconstructed surface are obtained after annealing a chemically etched sample. With further annealing dotted row domains appear, which coexist with the (2 × 2) reconstruction. The expansion of these domains with further annealing gives rise to the formation of a TiO₂ enriched c(4 × 4) reconstruction.     

Scanning tunnelling microscopy and spectroscopy of the reduced TiO2(1 0 0) surface

Scanning tunnelling microscopy and current imaging tunnelling spectroscopy were used to study the topographic and electronic structure of a reduced TiO₂(1 0 0) surface. The STM results showed that the TiO₂(1 0 0) surface is capable to form (1 × 7) reconstruction which can transform to (1 × 3) reconstruction due to reoxidation of the surface. The CITS results showed that the (1 × 7) reconstruction is much more metallic in compared to the (1 × 3) reconstruction showing pronounced surface states at energy 1.3 eV and 0.8 eV below the Fermi level and at energy 1.0-1.2 eV above the Fermi level.     

Structural characterisation of ultra-thin VOx films on TiO2(1 1 0)

The normal incidence X-ray standing wave (NIXSW) technique has been applied to investigate the structure of ultra-thin VO_x films grown on TiO₂(1 1 0) and pre-characterised by core level photoemission. For a film composed of a sub-monolayer coverage of V deposited in ultra-high vacuum the local structure of two coexistent species, labelled ‘oxidic’ and ‘metallic’, has been investigated independently through the use of chemical-shift-NIXSW. The ‘oxidic’ state is shown to be consistent with a mixture of epitaxial or substitutional sites and chemisorption into sites coordinated to three surface O atoms. The metallic V atoms also involve a mixture of chemisorption and second-layer sites above the substrate surface consistent with the formation of small V clusters. VO_x films up to ∼6 atomic layers were also grown by post-oxidation (sequential V deposition and annealing in oxygen) and by reactive evaporation in a partial pressure of oxygen. While films of around one monolayer or less are consistent with epitaxial VO₂ growth, the film quality deteriorates rapidly with increasing thickness and is worse for reactive evaporation. A possible interpretation of the NIXSW data is increasing contributions of V₂O₃ crystallites. The inferior quality of the reactively evaporated films may be due to an insufficient supply of oxygen.     

Adsorption structure of acetic anhydride on a TiO2(1 1 0) surface observed by scanning tunneling microscopy

The carboxylic acids are stably adsorbed on TiO₂(1 1 0) surfaces at room temperature. To demonstrate the neutralization mechanism proposed by Ashima et al. [H. Ashima, W.-J. Chun, K. Asakura, Surf. Sci. 601 (2007) 1822.] that explains the stable adsorption of carboxylic acids, we studied the full-coverage adsorption structure of acetic anhydride on a TiO₂(1 1 0) surface by STM (scanning tunneling microscopy). We directly observed three postulated species on the TiO₂(1 1 0) surface; normal acetates (termed acetate A) forming a (2 × 1) ordered structure, a minor acetate species (termed acetate B) which was present between the bridging oxygen and the 5-fold Ti, and the oxygen vacancies. We determined the ratio of these three species. This ratio was in good agreement with the postulated conversion reaction of acetate B to A.     

A surface X-ray diffraction study of TiO2(1 1 0)(3 × 1)-S

Surface X-ray diffraction has been used to investigate the structure of TiO₂(1 1 0)(3 × 1)-S. In concert with existing STM and photoemission data it is shown that on formation of a (3 × 1)-S overlayer, sulphur adsorbs in a position bridging 6-fold titanium atoms, and all bridging oxygens are lost. Sulphur adsorption gives rise to significant restructuring of the substrate, detected as deep as the fourth layer of the selvedge. The replacement of a bridging oxygen atom with sulphur gives rise to a significant motion of 6-fold co-ordinated titanium atoms away from the adsorbate, along with a concomitant rumpling of the second substrate layer.     

The growth and structure of titanium dioxide films on a Re(1 0 −1 0) surface: Rutile(0 1 1)-(2 × 1)

Titanium dioxide films were grown on Re(1 0 −1 0) by Ti vapor deposition in oxygen at T = 830 K and studied by means of low-energy electron diffraction (LEED), X-ray photoelectron spectroscopy (XPS), low-energy ion scattering (LEIS) and X-ray diffraction (XRD). The Ti oxide stoichiometry was determined by XPS as Ti:O = 1:2, with the Ti oxidation state (4+). The TiO₂ growth was monitored by means of LEED as a function of film thickness. Extending the coverage from the submonolayer into the multilayer regime gives rise to a p(2 × 2) pattern, a (poorly ordered) (1 × 1), and, finally, a stable (2 × 2) structure, the latter being associated with a homogeneous TiO₂ phase. For normal electron incidence, the (2 × 2) LEED pattern exhibits systematically extinguished beams at (n ± 1/2, 0) positions, indicating a glide mirror plane. The pg(2 × 2) structure could be explained by both a rutile(0 1 1)-(2 × 1) reconstructed surface and a bulk truncated brookite(0 0 1) surface. Faceting phenomena, i.e. running LEED spots, observed with thin TiO₂ films point to the formation of a rutile(0 1 1)-(2 × 1) surface with two domains and {0 1 1}-(2 × 1) facets and rule out the brookite alternative. Confirmation of this assignment was obtained by an XRD analysis performed at the Berlin synchrotron facility BESSY.     

Quantitative determination of the local structure of H2O on TiO2(1 1 0) using scanned-energy mode photoelectron diffraction

O 1s scanned-energy mode photoelectron diffraction has been used to determine the local structure of molecular water on TiO₂(1 1 0). The adsorption site is found to be atop five-fold coordinated surface Ti atoms, confirming the results of published total energy calculations and STM imaging. The Ti-O_w bondlength is found to be 2.21 ± 0.02 Å, much longer than Ti-O bondlengths in bulk TiO₂ and for the formate (HCOO-) species adsorbed on this surface. This is consistent with relatively weak bonding, and in general agreement with total energy calculations, although all of the published calculations yield bondlengths somewhat longer than the experimental value. Structural optimisation based on the photoelectron diffraction data also provides some information on the associated substrate relaxation. In particular, the bondlength of the five-fold coordinated surface Ti atom to the O atom directly below shows the same contraction (relative to the bulk) as is found for the clean surface, reinforcing the picture of rather weak bonding of the water to this same Ti surface atom.     

Surface evolution of rutile TiO2 (1 0 0) in an oxidizing environment

Transmission electron microscopy (TEM) has been used to study the rutile TiO₂ (1 0 0) surface in an oxidizing environment. By changing annealing conditions, TiO₂ surfaces with different morphologies are obtained. We report a new centered (2 × 2) surface reconstruction on this surface. Our experimental data indicates that this is a meta-stable, oxygen deficient structure formed as the disordered surface regains its stoichiometry in an oxidizing annealing environment.     

Electron-induced attachment of chlorinated benzenes to Si(1 0 0)2 × 1

Thermal (300 K) and electron-induced reactions of benzene (Bz), chlorobenzene (ClPh), 1,2-dichlorobenzene (1,2-diClPh) and 1,4-dichlorobenzene (1,4-diClPh) with Si(1 0 0)2 × 1 have been examined by scanning tunneling microscopy (STM). Thermal reactions of Bz yielded predominantly the quadruply-σ-bound tight bridge, TB, configuration on top of the Si dimer-rows, For ClPh and 1,2-diClPh, which resembled one another, thermal reaction led with 45-50% yield to the doubly-σ-bound butterfly, BF, configuration, also on top of the dimer-row, and with 20% yield to a novel ‘displaced’, D, configuration to one side of a dimer-row. The adsorbate 1,4-diClPh was alone in favouring a configuration in which neighbouring dimer-rows were ‘linked’ (L) by a bright-feature centrally located between the dimer-rows. By ab initio calculation, we interpret D as due to the rupture of one C-Cl bond per adsorbate molecule, and L to the rupture of two C-Cl’s. The breaking of this weak bond is followed in the former case by attachment of the aromatic ring to one dimer-row, and in the latter to attachment to two adjacent dimer-rows. Application of a −5 V voltage pulse to the STM tip substantially increased the percentage of row-linking structures, L, for 1,4-diClPh, but neither −5 V nor +4-6 V volt pulses resulted in L-type binding of Bz. The postulated L product of 1,4-diClPh, with an aromatic ring linking the two inner Si atoms of adjacent dimer-rows and the two Cl’s on the outer Si atoms of the dimer-rows, is shown to be in accord with ab initio simulation of the observed STM image.     

Oxygen-induced p(3 × 1) reconstruction of the W(1 0 0) surface

The oxidation of the W(1 0 0) surface at elevated temperatures has been studied using room temperature STM and LEED. High exposure of the clean surface to O₂ at 1500 K followed by flash-annealing to 2300 K in UHV results in the formation of a novel p(3 × 1) reconstruction, which is imaged by STM as a missing-row structure on the surface. Upon further annealing in UHV, this surface develops a floreted LEED pattern characteristic of twinned microdomains of monoclinic WO_x, while maintaining the p(3 × 1) missing-row structure. Atomically resolved STM images of this surface show a complex domain structure with single and double W〈0 1 0〉 rows coexisting on the surface in different domains.     

First-principles study of oxidized Nb(1 0 0) surface structures

The atomic positions of the oxygen-induced c(2 × 2)-O, (3 × 1)-O and (4 × 1)-O surface structures on Nb(1 0 0) are determined by first-principles electronic structure calculations within the density functional theory comparing experimentally observed scanning tunneling microscopy (STM) images. STM images of these surfaces are calculated on the basis of the theory of Tersoff and Hamann. The theoretical and experimental STM images of the oxygen-chemisorbed c(2 × 2)-O structural model agree well. However, only the oxide-covered (3 × 1)-O and (4 × 1)-O structural models with two layers of NbO and contraction of the unit length along longitudinal 〈1 0 0〉 direction by 10% result in the theoretical STM images that agree with the experimental ones.     

Scanning tunneling microscopy study on a BC3 covered NbB2(0 0 0 1) surface

We have investigated a BC₃ covered NbB₂(0 0 0 1) surface using scanning tunneling microscopy (STM), scanning tunneling spectroscopy (STS), and low energy electron diffraction (LEED). The STM images reveal characteristic features of a Moiré pattern reflecting an incommensurate relation of the BC₃ sheet with the substrate: bright protrusions with the periodicity of the substrate lattice are modulated in intensity with the periodicity of the BC₃ lattice. As a result, the surface exhibits nm-scale patchy regions with either the √3 × √3 or the 1 × 1 structure of the substrate. The two-dimensional Fourier transformation pattern of the STM image is consistent with the LEED pattern proving the epitaxial and incommensurate relationship between BC₃ surface sheet and substrate. No feature of a predicted superconducting gap was found in STS spectra measured at 5 K.     

Room and high-temperature scanning tunnelling microscopy and spectroscopy (HT-STM/STS) investigations of surface nanomodifications created on the TiO2(1 1 0) surface

High-temperature scanning tunnelling microscopy, scanning tunnelling spectroscopy and current imaging tunnelling spectroscopy (HT-STM/STS/CITS) were used to study the topographic and electronic structures changes due to surface modifications of the TiO₂(1 1 0) surface caused by the STM tip. In situ high-temperature STM results showed that the created modifications were stable even at elevated temperatures. The STS/CITS results showed the presence of energy gap below the Fermi level on the untreated regions. The disappearance of energy gap below the Fermi level on the modifications created by the tip was observed. It is assumed that the presence of the tip can change the chemical stoichiometry of the surface from TiO_2−x towards Ti₂O₃.     

Molecular dynamics study on surface structure and surface energy of rutile TiO2 (1 1 0)

The formula for surface energy was modified in accordance with the slab model of molecular dynamics (MDs) simulations, and MD simulations were performed to investigate the relaxed structure and surface energy of perfect and pit rutile TiO₂(1 1 0). Simulation results indicate that the slab with a surface more than four layers away from the fixed layer expresses well the surface characteristics of rutile TiO₂ (1 1 0) surface; and the surface energy of perfect rutile TiO₂ (1 1 0) surface converges to 1.801±0.001 J m⁻². The study on perfect and pit slab models proves the effectiveness of the modified formula for surface energy. Moreover, the surface energy of pit surface is higher than that of perfect surface and exhibits an upper-concave parabolic increase and a step-like increase with increasing the number of units deleted along [0 0 1] and [1 1 0], respectively. Therefore, in order to obtain a higher surface energy, the direction along which atoms are cut out should be chosen in accordance with the pit sizes: [] direction for a small pit size and [0 0 1] direction for a big pit size; or alternatively the odd units of atoms along [1 1 0] direction are removed.     

Deposition and fabrication of alkanethiolate gold nanocluster films on TiO2(1 1 0) and the effects of plasma etching

Deposition and fabrication of films of Au nanoclusters protected by alkanethiolate ligands are attempted on a TiO₂(1 1 0) surface and the structures of films are observed by a scanning tunneling microscope (STM). Effects of oxygen and hydrogen-plasma etching in addition to UV irradiation on the structure and chemical composition of the films are also investigated by using STM and X-ray photoelectron spectroscopy. Alkanethiolate Au nanoclusters are produced using a modified Brust synthesis method and their LB films are dip-coated on TiO₂(1 1 0). Alkanethiolate Au nanoclusters are weakly bound to the substrate and can be manipulated with an STM tip. Net-like structures of alkanethiolate Au nanoclusters are formed by a strong blast of air. Oxygen-plasma etching removes alkanethiolate ligands and simultaneously oxidizes Au clusters. At room temperature, prolonged oxygen-plasma etching causes agglomeration of Au nanoclusters. UV irradiation removes ligands partly, which makes Au nanoclusters less mobile. The net-like structure of alkanethiolate Au clusters produced by a blast of air is retained after oxygen and hydrogen-plasma etching.     

A study of the interaction between perylene and the TiO2(1 1 0)-(1 × 1) surface-based on XPS, UPS and NEXAFS measurements

The interaction between a semi-large aromatic hydrocarbon compound (perylene) and the TiO₂(1 1 0)-(1 × 1) surface under ultra high vacuum conditions has been probed by X-ray photoemission spectroscopy (XPS), ultraviolet photoemission spectroscopy (UPS) and near-edge X-ray absorption fine structure (NEXAFS) methods. UPS measurements of the adsorbate system have been compared with an experimental UPS spectrum of perylene in the gas phase and a calculated spectrum obtained by means of density functional theory (DFT) methods. NEXAFS results of perylene molecules adsorbed on TiO₂(1 1 0)-(1 × 1) were compared with data from an α-phase perylene single crystal. A novel analysis of the valence data has been employed to show that no strong chemical interaction takes place between perylene and the TiO₂(1 1 0)-(1 × 1) surface. Furthermore, angle-dependent NEXAFS measurements and the growth curve results suggest that the perylene molecules are oriented flat down onto the TiO₂ substrate due to weak van der Waals interactions.     

Low temperature InSb(0 0 1) surface structure studied by scanning tunneling microscopy

InSb(0 0 1) surface prepared by ion sputtering and thermal annealing has been studied in the temperature range from 77 K up to 300 K using scanning tunneling microscopy (STM). At 300 K the surface is c(8 × 2) reconstructed as indicated by low energy electron diffraction and STM images, and its structure appears to be consistent with the “ζ-model” recently proposed for this surface. Upon lowering of the temperature below 180 K a new phase appears on the surface. This phase is characterized by the surface structure period doubling along [1 1 0], lowering the surface symmetry from c2mm to p2, and appearance of structural domains. Possible origins of the new phase are discussed.     

Quasi-one-dimensional structures on the Si(1 1 1) surface induced by Ba adsorption

Ba-induced quasi-one-dimensional reconstructions of the Si(1 1 1) surface have been investigated by low energy electron diffraction (LEED) and scanning tunneling microscopy (STM). While the 3 × ‘2’ surface shows double-periodicity along the stripes in STM images consistent with half-order streaks observed in LEED patterns, no sign of the double-periodicity along the chain direction was detected for the 5 × 1 surface. The 5× stripes in STM images show internal structures with multiple rows. The two rows comprising the boundaries of a 5× stripe in the filled-state STM image are found to have 3a × √3/2 spacing across the stripe. The observation of the successive 3× and 2× spacings between the boundary rows supports a structural model proposed for the Ba-induced 5 × 1 Si reconstruction composed of honeycomb chains and Seiwatz chains. The highest coverage 2 × 8 surface does not reveal a quasi-1D row structure in STM images.     

High resolution scanning tunneling spectroscopy of ultrathin Pb on Si(1 1 1)-(6 × 6) substrate

The electronic structure of Si(1 1 1)-(6 × 6)Au surface covered with submonolayer amount of Pb is investigated using scanning tunneling spectroscopy. Already in small islands of Pb with thickness of 1 ML Pb_(1 1 1) and with the diameter of only about 2 nm we detected the quantized electronic state with energy 0.55 eV below the Fermi level. Similarly, the I(V) characteristics made for the Si(1 1 1)-(6 × 6)Au surface reveal a localized energy state 0.3 eV below the Fermi level. These energies result from fitting of the theoretical curves to the experimental data. The calculations are based on tight binding Hubbard model. The theoretical calculations clearly show prominent modification of the I(V) curve due to variation of electronic and topographic properties of the STM tip apex.