Synthesis and characterization of novel Schiff bases containing pyrimidine unit

The work involves synthesis of novel Schiff base derivatives containing a pyrimidine unit starting with chalcones. 4-Aminoacetophenone was reacted with 4-nitrobenzaldehyde or 4-chlorobenzaldehyde in basic medium giving chalcones, [I]_a and [I]_b, respectively, by Claisen-Schemidt reaction. The chalcones [I]_a and [I]_b were reacted with urea in HCl medium giving oxopyrimidines, [II]_a and [II]_b. They were also reacted with thiourea in basic medium to give thioxopyrimidines, [III]_a and [III]_b. The novel mono and bis Schiff bases, [VIII]_na, [VIII]_nb, [IX]_na, [IX]_nb, [X]_na, [X]_nb, [XI]_na, and [XI]_nb were synthesized by the reaction of pyrimidine derivatives; oxopyrimdines, [II]_a and [II]_b and thioxopyrimidines, [III]_a and [III]_b with 4-(4′-n-alkoxybenzoloxy)benzaldehyde [VI] and polymethylene-α,ω-bis-4-oxybenzaldehydes [VII]_m, respectively, in dry benzene using drops of glacial acetic acid as a catalyst. The synthesized compounds were characterized by melting points, elemental analysis, FTIR, and ¹H NMR spectroscopy.     

OBERFLÄCHEN-REAKTIONEN 151,2 Heterogen Dechlorierungen von Phosphorchloriden (X)PCI3 und R[sbnd]PCI2 an [Ag], [Mg], [Cux/TiO2] und [MgCI2[sbnd]MgO/SiO2] sowie spektroskopische Evidenz für das Entstehen von Diphospha-dicyan P[tbnd]C[sbnd]C[tbnd]P aus CI2P[sbnd][tbnd][sbnd]PCI2

Abstract

Stimulated by the successful generation of unsaturated molecules with low-coordinated phosphorus centers by heterogeneous surface dechlorination, CI₂,P[sbnd]C[tbnd]C[sbnd]PCI², is synthesized and characterized by PE and mass spectra. In addition, [Mg] curls, [Ag] wool and catalysts [Cu_x/TiO₂] or [MgCI₂,[sbnd]MgO/SiO₂] are tested as potential dechlorinating agents for phosphorus halides like OPCI₃, SPCI₃, H₃C[sbnd]PCI₂, H₅C₂-PCI₂, (H₃C)₃C[sbnd]PCI₂, or H₅C₆-PCI₂, in a gasflow reactor under reduced pressure and yield, inter aha, the following representative results: due to the thermodynamically favored formation of [MgCl₂], [MgO] or [MgS] at the Mg surface, P₄ is the only gaseous product identified from reactions of OPCI₃, and SPCI₃, with [Mg] metal at higher temperatures. On the contrary, passing H₃C-PCI₂, at 600K over [Mg] yields a reaction mixture containing P(CH₃)₃,(H₃C)₂P[sbnd]P(CH₃)₂, (H₃C[sbnd]P), and CH₄, which suggests an intermediate formation of surface phosphinidenes [H₃C[sbnd]P →Mg]. Analogously, the pentamer (H₃C[sbnd]H₂C[sbnd]P)₅ can be isolated from ethyldichlorophosphane. Reaction of the evaporated diphospha-cyanogen precursor CI₂P[sbnd]C[tbnd]C[sbnd]PCI₂ with the catalyst [10% MgCI₂,/MgO/SiO₂], produces predominantly PCI₃, and P₄, but PE and mass spectra provide evidence that also minor amounts of the hitherto unknown molecule P[tbnd]C[sbnd]C[tbnd]P are formed.     

Alkaline Earth Metal Template (Cross-)Coupling Reactions with Hybrid Disila-Crown Ether Analogues

Alkaline earth metal iodides were used as templates for the synthesis of novel silicon-based ligands. Siloxane moieties were (cross-)coupled and ion-specific, silicon-rich crown ether analogues were obtained. The reaction of 1,2,7,8-tetrasila[12]crown-4 ( I ) and 1,2-disila[9]crown-3 ( II ) with MgI₂ yielded exclusively [Mg(1,2,7,8-tetrasila[12]crown-4)I₂] ( 1 ). The larger Ca²⁺ ion was then employed for cross-coupling of I and II and yielded the complex [Ca(1,2,7,8-tetrasila[15]crown-5)I₂] ( 2 ). Cross-coupling of I and 1,2,4,5-tetrasila[9]crown-3 ( III ) with SrI₂ enables the synthesis of the silicon-dominant 1,2,4,5,10,11-hexasila[15]crown-5 ether complex of SrI₂ ( 3 ). Further, the compounds [Sr(1,2,10,11-tetrasila[18]crown-6)I₂] ( 4 ), [Sr(1,2,13,14-tetrasila[24]crown-8)I₂] ( 5 ), and [Sr(1,2,13,14-tetrasila-dibenzo[24]crown-8)I₂] ( 6 ) were obtained by coupling I , 1,2-disila[12]crown-4 ( IV ) or 1,2-disila-benzo[12]crown-4 ( V ), respectively. Using various anions, the (cross-)coupled ligands were also observed in an X-ray structure within the mentioned complexes. These template-assisted (cross-)couplings of various ligands are the first of their kind and a novel method to obtain macrocycles and/or their metal complexes to be established. Further, the Si−O bond activations presented herein might be of importance for silane or even organic functionalization.     

B−B Bond Nucleophilicity in a Tetraaryl μ-Hydridodiborane(4) Anion

The tetraaryl μ-hydridodiborane(4) anion [ 2 H]⁻ possesses nucleophilic B−B and B−H bonds. Treatment of K[ 2 H] with the electrophilic 9-H-9-borafluorene (HBFlu) furnishes the B₃ cluster K[ 3 ], with a triangular boron core linked through two BHB two-electron, three-center bonds and one electron-precise B−B bond, reminiscent of the prominent [B₃H₈]⁻ anion. Upon heating or prolonged stirring at room temperature, K[ 3 ] rearranges to a slightly more stable isomer K[ 3 a ]. The reaction of M[ 2 H] (M⁺=Li⁺, K⁺) with MeI or Me₃SiCl leads to equimolar amounts of 9-R-9-borafluorene and HBFlu (R=Me or Me₃Si). Thus, [ 2 H]⁻ behaves as a masked [:BFlu]⁻ nucleophile. The HBFlu by-product was used in situ to establish a tandem substitution-hydroboration reaction: a 1:1 mixture of M[ 2 H] and allyl bromide gave the 1,3-propylene-linked ditopic 9-borafluorene 5 as sole product. M[ 2 H] also participates in unprecedented [4+1] cycloadditions with dienes to furnish dialkyl diaryl spiroborates, M[R₂BFlu].     

P−P Condensation and P−N/P−P Bond Metathesis: Facile Synthesis of Cationic Tri- and Tetraphosphanes

[L_C^RP((PhP)₂C₂H₄)][OTf] ( 4 a,b [OTf]) and [L_C^iPrP(PPh₂)₂][OTf] ( 5 b [OTf]) were prepared from the reaction of imidazoliumyl-substituted dipyrazolylphosphane triflate salts [L_C^RP(pyr)₂][OTf] ( 3 a,b [OTf]; a : R=Me, b =iPr; L_C^R=1,3-dialkyl-4,5-dimethylimidazol-2-yl; pyr=3,5-dimethylpyrazol-1-yl) with the secondary phosphanes PhP(H)C₂H₄P(H)Ph) and Ph₂PH. A stepwise double P−N/P−P bond metathesis to catena-tetraphosphane-2,3-diium triflate salt [(Ph₂P)₂(L_C^MeP)₂][OTf]₂ ( 7 a [OTf]₂) is observed when reacting 3 a [OTf] with diphosphane P₂Ph₄. The coordination ability of 5 b [OTf] was probed with selected coinage metal salts [Cu(CH₃CN)₄]OTf, AgOTf and AuCl(tht) (tht=tetrahydrothiophene). For AuCl(tht), the helical complex [{(Ph₂PPL_C^iPr)Au}₄][OTf]₄ ( 9 [OTf]₄) was unexpectedly formed as a result of a chloride-induced P−P bond cleavage. The weakly coordinating triflate anion enables the formation of the expected copper(I) and silver(I) complexes [( 5 b )M(CH₃CN)₃][OTf]₂ (M=Cu, Ag) ( 10 [OTf]₂, 11 [OTf]₂).     

Revisit to the reaction of [60]fullerene with nitrile ylides generated from imidoyl chlorides and triethylamine

The reaction of [60]fullerene (C₆₀) with nitrile ylides generated from N-benzyl-4-nitrobenzimidoyl chloride/N-(4-chlorobenzyl)-4-nitrobenzimidoyl chloride and triethylamine gave only isomeric monoadducts of C₆₀ with [6,6]-closed structure. No [5,6]-open adduct of C₆₀ could be identified from these reactions. The previously reported [5,6]-open product of C₆₀ should be reassigned as a [6,6]-closed product.     

Charge-Transfer Salts of Ferrocene Derivatives with Bis(maleonitriledithiolato)metallate(III) Complexes ([M(mnt)2]−, M=Ni,Pt): A Ground-State High-Spin [(Ni(mnt)2)2]2− Dimer

New hexamethylated ferrocene derivatives containing thioether moieties (1,1′-bis[(tert-butyl)thio]-2,2′,3,3′,4,4′-hexamethylferrocene ( 3a , b )) or fused S-heteropolycyclic substituents (rac-1-[(1,3-benzodithiol- 2-yliden)methyl]-2,2′,3,3′,4,4′-hexamethylferrocene ( 5 ) and rac-1-[1,2-bis(1,3-benzodithiol-2-yliden)ethyl]-2,2′,3,3′,4,4′-hexamethylferrocene ( 14 )), as well as a series of ferrocene-substituted vinylogous tetrathiafulvalenes (1,1′-bis[1,2-bis(1,3-benzodithiol-2-yliden)ethyl]ferrocene ( 6a ), 1,1′-bis[1-(1,3-benzodithiol-2-yliden)-2-(5,6-dihydro-1,3-dithiolo[4,5-b] [1,4]dithiin-2-yliden)ethyl]ferrocene ( 6b ), [1,2-bis(1,3-benzodithiol-2-yliden)ethyl]ferrocene ( 21a ), [1-(1,3-benzodithiol-2-yliden)-2-(5,6-dihydro-1,3-dithiolo[4,5-b] [1,4]dithiin-2-yliden)ethyl]ferrocene ( 21b ), [1,2-bis(5,6-dihydro-1,3-dithiolo[4,5-b] [1,4]dithiin-2-yliden)ethyl]ferrocene ( 21c ), [1-(5,6-dihydro-1,3-dithiolo[4,5-b] [1,4]dithiin-2-yliden)-2-(1,3-benzodithiol-2-yliden)ethyl]ferrocene ( 21d )) were prepared and fully characterized. Their redox properties show that some of them are easily oxidized and undergo transformation to paramagnetic salts containing bis(maleonitriledithiolato)-metallate(III) anions [M(mnt)₂]⁻ (M=Ni, Pt; bis[2,3-dimercapto-κS)but-2-enedinitrilato(2⁻)]nickelate (1⁻) or -platinate (1⁻). The derivatives [ 3a ] [Ni(mnt)₂] ( 26 ), [ 3a ] [Pt(mnt)₂] ( 27 ), [Fe{(η⁵-C₅Me₄S)₂S}] [Ni(Mnt)₂] ( 28 ), [Fe{(η⁵-C₅Me₄S)₂S}] [Pt(mnt)₂] ( 29 ), [ 5 ] [Ni(mnt)₂]⋅ClCH₂CH₂Cl ( 30 ), [ 6a ] [Ni(mnt)₂] ( 31 ), [ 6a ] [Ni(mnt)₂]⋅ClCH₂CH₂Cl ( 31a ), [ 6a ] [Pt(mnt)₂] [ 32 ), and [ 6b ] [Ni(mnt)₂] ( 33 ) were prepared and fully characterized, including by SQUID (superconducting quantum interference device) susceptibility measurements. X-Ray crystal-structural studies of the neutral ferrocene derivatives 6a , b , 21c , d , and 1,1′-bis[1-(1,3-benzodithiol-2-yliden)-2-oxoethyl]ferrocene ( 23 ), as well as of the charge-transfer salts 26 – 28 , 30 , and 31a , are reported. The salts 28 and 30 display both a D⁺A⁻A⁻D⁺ structural motif, however, with a different relative arrangement of the [{Ni(mnt)₂}₂]²⁻ dimers, thus giving rise to different but strong antiferromagnetic couplings. Salt 26 exhibits isolated ferromagnetically coupled [{Ni(mnt)₂}₂]²⁻ dimers. Salt 27 displays a D⁺A⁻D⁺A⁻ structural motif in all three space dimensions, and a week ferromagnetic ordering at low temperature. Salt 31a , on the contrary, shows segregated stacks of cations and anions. The cations are connected with each other in two dimensions, and the anions are separated by a 1,2-dichloroethane molecule.     

B−B Bond Nucleophilicity in a Tetraaryl μ‐Hydridodiborane(4) Anion

The tetraaryl μ‐hydridodiborane(4) anion [ 2 H]^? possesses nucleophilic B?B and B?H bonds. Treatment of K[ 2 H] with the electrophilic 9‐H‐9‐borafluorene (HBFlu) furnishes the B₃ cluster K[ 3 ], with a triangular boron core linked through two BHB two‐electron, three‐center bonds and one electron‐precise B?B bond, reminiscent of the prominent [B₃H₈]^? anion. Upon heating or prolonged stirring at room temperature, K[ 3 ] rearranges to a slightly more stable isomer K[ 3 a ]. The reaction of M[ 2 H] (M⁺=Li⁺, K⁺) with MeI or Me₃SiCl leads to equimolar amounts of 9‐R‐9‐borafluorene and HBFlu (R=Me or Me₃Si). Thus, [ 2 H]^? behaves as a masked [:BFlu]^? nucleophile. The HBFlu by‐product was used in situ to establish a tandem substitution‐hydroboration reaction: a 1:1 mixture of M[ 2 H] and allyl bromide gave the 1,3‐propylene‐linked ditopic 9‐borafluorene 5 as sole product. M[ 2 H] also participates in unprecedented [4+1] cycloadditions with dienes to furnish dialkyl diaryl spiroborates, M[R₂BFlu].     

P−P Condensation and P−N/P−P Bond Metathesis: Facile Synthesis of Cationic Tri‐ and Tetraphosphanes

[L_C^RP((PhP)₂C₂H₄)][OTf] ( 4 a,b [OTf]) and [L_C^iPrP(PPh₂)₂][OTf] ( 5 b [OTf]) were prepared from the reaction of imidazoliumyl‐substituted dipyrazolylphosphane triflate salts [L_C^RP(pyr)₂][OTf] ( 3 a,b [OTf]; a : R=Me, b =iPr; L_C^R=1,3‐dialkyl‐4,5‐dimethylimidazol‐2‐yl; pyr=3,5‐dimethylpyrazol‐1‐yl) with the secondary phosphanes PhP(H)C₂H₄P(H)Ph) and Ph₂PH. A stepwise double P?N/P?P bond metathesis to catena‐tetraphosphane‐2,3‐diium triflate salt [(Ph₂P)₂(L_C^MeP)₂][OTf]₂ ( 7 a [OTf]₂) is observed when reacting 3 a [OTf] with diphosphane P₂Ph₄. The coordination ability of 5 b [OTf] was probed with selected coinage metal salts [Cu(CH₃CN)₄]OTf, AgOTf and AuCl(tht) (tht=tetrahydrothiophene). For AuCl(tht), the helical complex [{(Ph₂PPL_C^iPr)Au}₄][OTf]₄ ( 9 [OTf]₄) was unexpectedly formed as a result of a chloride‐induced P?P bond cleavage. The weakly coordinating triflate anion enables the formation of the expected copper(I) and silver(I) complexes [( 5 b )M(CH₃CN)₃][OTf]₂ (M=Cu, Ag) ( 10 [OTf]₂, 11 [OTf]₂).     

Polymerization of phenylacetylene catalysed by RhTp(cod) and RhBp(cod) in ionic liquids: effect of alcohols and of tetraammonium halides

RhTp(cod) ( 1 ) and RhBp(cod) ( 2 ), almost inactive in CH₂Cl₂, became good catalysts of phenylacetylene polymerization in ionic liquids ([bmim]Cl, [bmim]BF₄: bmim = 1‐butyl‐3‐methylimidazolium, [mokt]BF₄: mokt = 1‐methyl‐3‐oktylimidazolium, [bumepy]BF₄: 1‐butyl‐4‐methylpyridinium) and in CH₂Cl₂ in the presence of tetraammonium halides ([R₄N]X, R = Bu, Et; X = Cl, Br). The highest yields of polyphenylacetylene with catalyst 1 were obtained in [bmim]Cl at 65°C (64% after 2 h) and in [mokt]BF₄ at 20°C (56% after 24 h). In alcohols (CH₃OH, (CH₃)₂CHOH, (CH₃)₃COH) as solvents, up to 100% of the polymer was produced. When a mixture of an ionic liquid and CH₃OH was used as the reaction medium, the polymer yield was similar to the yield achieved in an ionic liquid only, but the molecular weight increased remarkably. Tetraammonium salts, [R₄N]X, are co‐catalysts for 1 , and the yield of the polymer increased in the order [Et₄N]Br < [Bu₄N]Br < [Et₄N]Cl < [Bu₄N]Cl. Polymers with molecular weights from 6900 to 38 800 Da were obtained with catalyst 2 in [R₄N]Br or [R₄N]Cl, whereas in ionic liquids ([bmim]Cl, [bmim]BF₄) the corresponding molecular weights were higher, from 51 300 to 60 300 Da. Copyright © 2004 John Wiley & Sons, Ltd.     

Electronic Communication between two [10]cycloparaphenylenes and Bis(azafullerene) (C59N)2 Induced by Cooperative Complexation

The complex of [10]cycloparaphenylene ([10]CPP) with bis(azafullerene) (C₅₉N)₂ is investigated experimentally and computationally. Two [10]CPP rings are bound to the dimeric azafullerene giving [10]CPP?(C₅₉N)₂?[10]CPP. Photophysical and redox properties support an electronic interaction between the components especially when the second [10]CPP is bound. Unlike [10]CPP?C₆₀, in which there is negligible electronic communication between the two species, upon photoexcitation a partial charge transfer phenomenon is revealed between [10]CPP and (C₅₉N)₂ reminiscent of CPP‐encapsulated metallofullerenes. Such an alternative electron‐rich fullerene species demonstrates C₆₀‐like ground‐state properties and metallofullerene‐like excited‐state properties opening new avenues for construction of functional supramolecular architectures with organic materials.     

Bildung Siliciumorganischer Verbindungen. LV. Die Konformeren des 1,3,5,7-Tetrasila-bicyclo[3,3,1]nonans und 2,4,6,8,9-Pentasila-bicyclo[3,3,1]nonans

Formation of Organosilicon Compounds. LV. Conformeres of the 1,3,5,7-Tetrasilabicyclo [3,3,1] nonane and 2,4,6,8,9-Pentasila-bicyclo [3,3,1] nonane Two types of carbosilanes with a bicyclo [3,3,1] nonane structure are reported, derivatives of 1,3,5,7-Tetrasila-bicyclo-[3,3,1] nonane (a) and of 2,4,6,8,9-Pentasila-bicyclo [3,3,1] nonane (b) with an inverse structure in respect to the Si- and C-atoms. By means of NMR-investigations the structure can be determined. Derivatives of (a) are present in the Si₄C₁₁H₂₈ with fully methylated Si-atoms, the 1,5 dichloro-1,3,5,7-tetrasila-bicyclo [3,3,1] nonane and Si₄Cl₆C₅H₁₀ with fully chlorinated Si-atoms with twofold boat conformation. In the derivatives of type (b) as Si₅H₁₀C₄H₆ with hydrogenated Si-atoms as well as in 9,9-dichloro-2,4,6,8,9-pentasila-bicyclo [3,3,1] nonane a change in conformation is observed, whereas a rigid chair conformation is found for both rings in the Si-chlorimated derivative Si₅Cl₁₀C₄H₁₀. A comparison of atom-resp. H? H distances in cyclohexane and 1,3,5-Trisilacyclohexane gives evidence that the boat conformation is more preferable for the 1,3,5-Trisilacyclohexane than for cyclohexane due to larger H? H-distances (caused by Si? C-distances).     

Synthesis,Structure, and Molecular Recognition of S6‐ and (SO2)6‐Corona[6](het)arenes: Control of Macrocyclic Conformation and Properties by the Oxidation State of the Bridging Heteroatoms

We report herein the synthesis, structure, and molecular recognition of S₆‐ and (SO₂)₆‐corona[6](het)arenes, and demonstrate a unique and efficient strategy of regulating macrocyclic conformation and properties by adjusting the oxidation state of the heteroatom linkages. The one‐pot nucleophilic aromatic substitution reaction of 1,4‐benzenedithiol derivatives, biphenyl‐4,4′‐dithiol and 9,9‐dipropyl‐9H‐fluorene‐2,7‐dithiol with 3,6‐dichlorotetrazine afforded S₆‐corona[3]arene[3]tetrazines. These compounds underwent inverse‐electron‐demand Diels–Alder reaction with enamines and norbornadiene to produce S₆‐corona[3]arene[3]pyridazines. Facile oxidation of sulfide linkages yielded (SO₂)₆‐corona[3]arene[3]pyridazines. All corona[6](het)arenes adopted generally hexagonal macrocyclic ring structures; however, their electronic properties and conformation could be fine‐tuned by altering the oxidation state of the sulfur linkages. Whereas (SO₂)₆‐corona[3]arene[3]pyridazines were electron‐deficient, S₆‐corona[3]arene[3]pyridazines acted as electron‐rich macrocyclic hosts that recognized various organic cations in both aqueous and organic solutions.     

Reaction of 1,1′‐Divinyl Ferrocene with One‐Electron Oxidants: Entry into Functionalised [4]Ferrocenophanes and Observation of an Isotope‐Dependent Chemoselectivity Effect

1,1′‐Divinyl ferrocene ( 2 ) reacts with K₃[Fe(CN)₆] under basic biphasic conditions to give a [4]ferrocenophane ( 4 ) in good yield. Incorporating deuterium labels into the internal positions of the vinyl groups of 2 affects the chemoselectivity of the reaction; thus under identical reaction conditions, [D₂]‐ 2 reacts to provide a diol‐functionalised [4]ferrocenophane, [D₂]‐D /L ‐ 6 in addition to the expected keto‐alcohol, [D₁]‐ 4 . Variants on this one‐electron oxidative cyclisation methodology can be used to give other [4]ferrocenophanes; thus, the reaction of 2 with CuCl₂ in MeOH or iPrOH leads to dialkoxy [4]ferrocenophanes 19 and 20 , respectively, whereas the reaction of 2 with benzyl carbamate in the presence of tBuOCl gives a bis(carbamate)[4]ferrocenophane, 21 . Mechanisms to account for the formation of the products, the stereoselectivity, and the unusual isotope‐dependent chemoselectivity in the reaction of 2 and [D₂]‐ 2 with K₃[Fe(CN)₆] are proposed.     

Catalytic Divergent [3+3]‐ and [3+2]‐Cycloaddition by Discrimination Between Diazo Compounds

Highly selective divergent cycloaddition reactions of enoldiazo compounds and α‐diazocarboximides catalyzed by copper(I) or dirhodium(II) have been developed. With tetrakis(acetonitrile)copper(I) tetrafluoroborate as the catalyst epoxypyrrolo[1,2‐a]azepine derivatives were prepared in good yields and excellent diastereoselectivities through the first reported [3+3]‐cycloaddition of a carbonyl ylide. Use of Rh₂(pfb)₄ or Rh₂(esp)₂ directs the reactants to regioselective [3+2]‐cycloaddition generating cyclopenta[2,3]pyrrolo[2,1‐b]oxazoles with good yields and excellent diastereoselectivities.     

Calixarene Complexes of Anion-bridged Oligouranyl Species

The syntheses and structures of uranyl complexes of p-t-Bu-calix[6]arene (calix[6]H₆) and p-t-Bu-calix[9]arene (calix[9]H₉) are reported, further developing the role of calixarenes as 'cluster keepers'. The calix[6]arene complex, formulated as [(HO){UO₂(calix[6]H₄)(dmso)}₃H], is trinuclear and linked symmetrically by the hydroxyl O atom. The calix[9]arene complex is binuclear, with a carbonate atom bridging between the two uranyl cations to give the complex, (HNEt₃)₃[(OCO₂)(UO₂)₃(calix[9]H₄)].     

High performance electromechanical actuators based on ionic liquid/poly(vinylidene fluoride)

Due to the increasing need of low voltage actuators, independent from electrochemical processes, electroactive actuators based on poly(vinylidene fluoride) composites with 10, 25 and 40% of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [C₂mim] [NTf₂], ionic liquid are prepared by solvent casting and melting. We show that the charge structure of [C₂mim] [NTf₂] induces the complete piezoelectric β-phase crystallization of the PVDF within the composite and decreases its crystallinity fraction significantly. [C₂mim] [NTf₂] also works as a plasticizer of PVDF, reducing the elastic modulus down to 12% of the initial value. Moreover, the composites show significant displacement and bending under applied voltages of 2, 5 and 10 Vpp. The displacement and bending of the composite membranes are also evaluated as a function of [C₂mim] [NTf₂] content and sample thickness. Increasing amounts of ionic liquid result in larger deformations independently of the applied voltage.     

[F]Fluoromethyl iodide ([F]FCH2I): preparation and reactions with phenol, thiophenol, amide and amine functional groups

In this study, we report the synthesis and reactivity of [¹⁸F]fluoromethyl iodide ([¹⁸F]FCH₂I) with various nucleophilic substrates and the stabilities of [¹⁸F]fluoromethylated compounds. [¹⁸F]FCH₂I was prepared by reacting diiodomethane (CH₂I₂) with [¹⁸F]KF, and purified by distillation in radiochemical yields of 14-31% (n = 25). [¹⁸F]FCH₂I was stable in organic solvents commonly used for labeling and aqueous solution with pH 1-7, but was unstable in basic solutions. [¹⁸F]FCH₂I displayed a high reactivity with various nucleophilic substrates such as phenol, thiophenol, amide and amine. The [¹⁸F]fluoromethylated compounds synthesized by the reactions of phenol, thiophenol and tertiary amine with [¹⁸F]FCH₂I were stable for purification, formulation and storage. In contrast, the [¹⁸F]fluoromethylated compounds synthesized by the reactions of primary or secondary amines, and amide with [¹⁸F]FCH₂I were too unstable to be detected or purified from the reaction mixtures. Defluorination of these [¹⁸F]fluoromethyl compounds was a main decomposition route.     

Cs[Er6C]I12 und Cs2Lu[Lu6C]Cl18: Beispiele für quaternäre reduzierte Halogenide der Lanthanide mit isolierten „Clustern”︁

CS[Er₆C]I₁₂ and cs₂Lu[Lu₆C]CI₁₈: Examples for Quaternary Reduced Halides of the Lanthanides with Isolated “Clusters” Cs[Er₆C]I₁₂ and Cs₂Lu[Lu₆C]Cl₁₈ were obtained as byproducts through metallothermic reductions of ErI₃ and LuCl, with cesium in the presence of carbon in sealed tantalum containers at temperatures ranging from 700 to 940 °C. Cs₂Lu[Lu₆C]Cl₁₈ (isostructural with Cs₂Zr[Zr₆H]Cl₁₈, R 3 , a = 981.7 pm, c = 2723.2 pm, Z = 3, R = 0.082, R, = 0.053) contains octahedral [Lu₆C] clusters which are slightly compressed along the threefold axis and edge-bridged by twelve chloride anions to form [Lu₆C]Cl₁₂ units. Six additional Cl in exo positions of the cluster provide octahedral coordination for the seventh Lu³⁺. Cs⁺ occupies anticuboctahedral interstices within the Cl⁺ layers as a part of the (hexagonal) closest packed arrangement. Cs[Er₆C]I₁₂ (trigonal, R 3, a = 1112.0pm, c = 2063.8pm, Z = 3, R = 0.094, R, = 0.068) exhibits [Er₆C]I₁₂ units as well and shows the structural framework of Sc[Sc₆N]Cl₁₂. Instead of Sc³⁺ in octahedral holes, cesium occupies a regular iodide position within the ccp sheets forming [CsI₃] layers. Both halides are compared with other compounds of the lanthanides containing isolated [M₆X₁₂] clusters. The extreme electron deficiency is discussed.     

Lithium Cyanide Supported by O‐ and N‐Donors

A series of adducts of LiCN, namely [Li(Me₂CO₃)CN], [Li(Et₂CO₃)CN], and [Li(NMP)CN] (NMP = N‐methyl‐2‐pyrrolidone) were prepared by treatment of solvent‐free LiCN with the appropriate donor. The starting material for these approaches, donor‐free LiCN, was quantitatively prepared from Me₃SiCN and Li[Me] in diethyl ether at 0 °C. Alternatively, [Li(NMP)CN] was synthesized by metathesis reaction of LiCl with NaCN in the presence of stoichiometric amounts of NMP. Although [Li(Me₂CO₃)CN] and [Li(Et₂CO₃)CN] are water‐sensitive compounds and decompose at the exposure to air, [Li(NMP)CN] is stable in air, even at elevated temperatures. The thermal stability of [Li(NMP)CN] was proven by differential thermal analysis (DTA). [Li(NMP)CN] shows thermal stability up to temperatures of about 132 °C. To evaluate the cyanation ability the reactions of 1‐bromooctane and 3‐bromocyclohexene with unsupported LiCN, [Li(NMP)CN], and a mixture of NaCN/LiCl/NMP were investigated. We found that [Li(NMP)CN] as well as LiCl/NaCN/NMP are efficient cyanation reagents comparable to the expensive and air‐sensitive, donor‐free LiCN. A product of the chloride‐cyanide‐bromide exchange could be isolated and structurally characterized by X‐ray diffraction.